Error 41453 When loading opportunities
Hello there,
Could anybody help me with this question: when loading opportunities, I get this error message: "An unexpected error occurred during the import of the following row: 'Opportunity Name: tests; Direct Customer: ' " does anybody knows what does this mean?
Cheers
Joann
Hello,
I had the same error. <i>Error 1 when loading external data from a flat file</i>. I didn't now what was wrong with it. We started to make some test and try the solution we read here but the error continued, and it finally worked when we changed the name of the file, and <b>got rid of all the blanc spaces in the name</b>.
I hope it works for you too.
Regards.
Message was edited by:
AltimBW Astral
Similar Messages
-
Error 1 when loading flat file in BW 7.0
Hi,
The flat file structure is same as the transfer structure. Its a csv file and i also checked about the delimiters and stuff.The flat is not open and it is closed while i am loading it. The same file gets loaded if i try in another laptop with my id.If i use my colleague's id on my system also...it doest work...so, the basic problem is with my laptop. I know its nor related to type of data or transfer structure. Its some settings on my laptop which got changed automatically. If i install some other softwares like mozilla firefox or yahoo msg-will that create a problem? I am not at all understanding why its like this. Please help.The error msgs i get when i try to load the flat file -
Error 1 when loading external data
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Error when opening the data file C:\vikki1.csv (origin C)
Message no.
Diagnosis
File C:\ vikki1.csv (origin C) could not be opened.
Origin:
A : Application server
C : Client workstation
Procedure
Check whether the file entered exists and is not been used by other applications.Hi! Vikki,
Error 1 means your flat file is open while uploading the data..
your flat file should be closed while uploading data in BW.
that is why it is saying "Error when opening the file..".
first close that file n then upload..it will work.
rest of the things are ok!..
I hope this will help you.
Regards,
khyati. -
"****Error from PSA****" error message when loading InfoCube
Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
MikiHi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye. -
I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)You can o a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]] -
I get the following error message when attempting to load Lightroom: Error -302 when loading url aam://SAPCode=LTRM?productVersion=5.5?passPhrase=RRR9EU9BaSBdtGb7+BrzzYZ9hLdjmpvEWeq7/9gS Yn2+lUDLZNr9UveWEgxzaiobbibx4d6JK3R74HPAX4YFwTpkn6K3YQk6Ej82wRFyYvKwXKAVMfMhQCfW5qg8odoMny OV1JlBuT0gEMjSjG5EhuCR288pgnfgQbAmchGqKSU=
What can I do to solve the problem?Ewlett you are receiving this error because the AAM Detect plug-in is not yet installed. Please see Error referring to aam protocol when you click download button | CC for more details.
-
Error handling when loading flate files
Hi
We have a Process Chain loading flate files from a server into a ODS. We want to create a routine to avoid errors in the ODS when no files is found.
The error we want to handle is
Error 1 when loading external data
Message no. RSAR234
We want to handle this error message as OK to avoid red request in the ODS
Please help
Kind regards
Ola Einar LangenHi, and thanks for your hints.
We ended up with the following codes. It's will mark the prosess chain red (but this is as wanted) but we have implemented that the prosess chain will proceed even with error in the loading process
The code for the routine implemented in the infopackage in "External data" tab.
p_filename = 'filename.txt.
OPEN DATASET p_filename FOR INPUT IN BINARY MODE.
If file could not be open
IF SY-SUBRC NE 0.
p_subrc = SY-SUBRC.
delete the current request
CALL FUNCTION 'RSSM_DELETE_REQUEST'.
ENDIF.
close the file if OK
CLOSE DATASET p_filename.
p_subrc = 0.
The solution is no OK for us
Kind regards
Ola Einar Langen -
An error occurred when loading the Cube ; Analysis services 2012
Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support -
"Error occurs when loading transaction data from other model" - BW loading into BPC
Hi Experts,
I'm having a problem with my data loading from BW, using the standard Load InfoProvider Selections data manager package.
If I run for a period without data it succeeds (with warning) but if there is data to be extracted I get the following error:
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other model
model: AIACONS. Package status: ERROR
As it runs ok when there isn't data it appears there is something preventing the movements of data out of the cube itself, rather then a validation issue.
Has anyone encountered similar or have any ideas as to the problem?
Best,
ChrisHi Vadim,
It's not specific to the transformation file as I have tried with others for the same BW cube and get the same result.
We get a warning when we try and validate the transformation file:
"Error occurs when loading transaction data from other model".
This only appears in the validation pop up and doesn't throw up any warnings about the transformation file itself. The validation log says:
Validate and Process Transformation File Log
Log creation time
3/7/2014 16:09
The result of validation of the
conversion file
SUCCESS
The result of validation of the
conversion file with the data file
FAIL
Validation Result
Validation Option
ValidateRecords = NO
Message
Error occurs when loading transaction data from other model
Reject List
I can't find any errors anywhere else.
Best,
Chris -
Error occurs when loading transaction data from other model
Hello Experts, I am trying to validate my transformation file and I can see peculiar behaviour of the transformation file. Even though the transformation file is not complete/ complete with all the mappings, i am getting the same error as above.
I can see options, mapping and conversion sections are validating successfully and throwing the above error.
Incomplete Transformation File
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= 10
ROUNDAMOUNT=
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
Validating the transformation files
Validating options...
Validation of options was successful.
Validating mappings...
Validation of mappings was successful.
Validating conversions...
Validation of the conversion was successful
Creating the transformation xml file. Please wait...
Transformation xml file has been saved successfully.
Begin validate transformation file with data file...
[Start test transformation file]
Validate has successfully completed
ValidateRecords = YES
Error occurs when loading transaction data from other model
Validation with data file failed
I am getting the same error with complete transformation file also. Please let me know where I am doing the mistake or is it a system error?
Thanking you
PraveenHi,
By
*MAPPING
CUSTOMER = *NEWCOL (NO_CUST)
you want CUSTOMER to receive a fixed string "NO_CUST"?
If so use,
*MAPPING
CUSTOMER = *STR (NO_CUST) -
Error 4 when loading external data
hi all,
I have unchecked uncheck currency conversion for external systems in my info package and then loaded the data from a flat file.
and then i am getting the below errors.
cost -> cannot be converted to currenecy (since cost contains currency item)
netval_inv -> cannot be converted to currenecy (since cost contains currency item)
/bic/zntwthpm -> cannot be converted to currenecy (since cost contains currency item).
if i check the option
currency conversion for external systems in my info package
then i am getting error 4 when loading external data.
Can anyone help me out!!!
thanxs
harithaHi haritha,
Please check whether your file whcih you are loading is open , when you are starting the Infopackage.
Also please check this SAP Note 600246 - RSAR 234: Error 4 when you load external data.
What is your BW System (Version/Patch)
Thanks.
CK -
Error 3 when loading external data
Hi Gurus!!
I am trying to load data from a flat file into a Cube. The load is done by a process chain and have worked perfectly before. The file is located on the application server.
Now I get the following error:
Cannot Update Request REQU_DESUFKD2XA1LDREQ0KEJZ2TJC in Data Target
Error 3 when loading external data
The file looks ok when i compare it with the ones i received earlier.
Any ideas what this error 3 is all about?
Thanks in advance!
PontusHi
I Have had trouble raching the network for some time.
Problem solved. My misstake, It was the cube that were set to transactional.....
I will credit A.H.P.
Thanks everyone!
Regards
Pontus -
Error 1003 when loading a VI dynamically on LabView Run-time ini file configuration
hi all,
I have a problem with my runtime excutable.
On 4 systems, all running XP it runs fine.
On 2 systems ( one a new install of just LVRT 2011 SP1 ) I have:
Error 1003 when loading a VI dynamically on LabView Real-time
Or more spoecifically the error code is 1003 and the error source is Open VI Reference.
When the RT app runs correctly I get these paths:
Path Sent to Open Vi Reference: Yeast_Grower.exe\Tecan_talk_Control.vi,
Path Returned from Open Vi Refence: C:\Program Files\Yeast_Grower\Yeast_Grower.exe\Tecan_talk_Control.vi,
On a system that does gets the 1003 Open Vi Refence error I have the same Path Sent but of course no path returned as it does not open.
To be sure that the vi Dyanmically called vi is compiled and valid at runtime I also include a copy of in the main.vi.
To be extra sure I have also installed the runtime versions of VISA and DAQmx.
I have compiled it with and without the "Use LV 8 calling hiaracy"
My conclusion as this stage is that either the installation of LVRT 2011SP1 misses something the earlier LVRT installtions make.
or is there a MyApp.ini or LVRT .ini that controls how the RT dyanim calls are handled.
Help very welcome how to solve this puzzle.
thanks
michaelI understand that all the PCs (6 of them) have LV 2011 SP1, runtime or the development system installed. Right?
How many of these PCs have the source code available on them?
-> Only one of them has the source code.
I am not sure I understood 'I also include a copy of in the main.vi'. Does it mean you placed the subvi in the main.vi?
-> I meant I have included in main.vi the actual vi that is called dynamically - but only where it is not called.
Did you try including the sub vi which is called dynamically, as 'Always included' in the EXE build?
-> No, I did not know of this option - but the above I did this by default.
Edit: Did you verify the software versions of LV RT, VISA etc on all the PCs? Are they same?
-> I did verify even added DAQmx just in case
There is lots of material available on this forum for error 1003 and dynamic vi calling. Did you find anything useful to try among the forums threads?
-> I did view many of them.
I did finally find the answer.
I have a subvi (callNet.vi ) in the dynamically called vi (dynamic ) that calls .Net libraries.
Now the thing is that this subvi callNet.vi is coded out by enclosing it in a Disable structure.
In fact this subvi ( callNet.vi) does not even compile - ie it has a broken arrow
however if enclosed in a Disabled structure and disabled, the enclosing vi compiles OK.
However I have discovered that even with the .Net calling subvi (callNet.vi) in the Disabled state of the Disabled structure
the enclosing vi (dynamic.vi ) does NOT run - although it compiles just fine.
Once I installed the .Net libraries (I actually did include them with my app installer ) with the vender's supplied installer
then my app now successfully calls the dynamic vi.
So the Summary and warning is: Even if the dynamic called vi is included in Main.vi and Main.exe runs ( but does not call the dynamic vi - except when called dynamically at later some point ) and even if, in this case, the .Net calling subvi is disabled out ie no .Net calls are made the dynamically called vi will not run when called dynamically.
I hope that is not too confusing. In summary it seems the Disable structure does not entirely disable.
Michael -
Error 1 when loading external data
Hi BW( Best and Wise) friends,
I am not able to load data into my infocube. My source system is a PC file.
Message <b>"Error 1 when loading external data is displayed."</b> when scheduled.
When I checked the error details using Monitor button,
During extraction, the data request was arranged(indicated by green mark),but there was error in <b>data request(red).</b>
During extraction,data request was received (green),but there was some error in <b>data selection(red).</b>
Anticipating good solution.HI all,
1.The flatfile matches with the transfer structure
2.The file is a .csv format file only.
3.The path is correct
I had chosen comma as my data separator.
I had declared fields in the following way in the XL csv file
Name of the candidate text
Name of the party- text
Age-number
Number of votes gained number
Calendar day text.
I had already tried the following.
When I clicked the preview in the external data tab of the infopackage, a window showing the preview parameters is opening. When I clicked the tickmark, message error 1 when loading data is displayed.
4. The details tab of the monitor showed the following:
Overall status : Errors occurred: or: Missing messages-red
4.1)Requests(messages):Errors occurred-red
Data request arranged-green
Error in datarequest-red
4.2)Extraction(messages):Errors occurred-red
Data request received-green
Error occurred in data selection-red
4.3)Transfer(IDocs and TRFC):Everything ok-green
Info IDoc 1: Application document posted-green
Info IDoc 2: Application document posted-green
4.4)Processing(data packet): No data-yellow
I had initiated the discussion in the forum with this information only.
Regards,
Balaji
Message was edited by: balaji vijayakumar -
Error occurs when loading transaction data from other cube
Hi Gurus,
I'm currently working on a Transformation File for loading Transactional Data from BW to BPC but a error message is displayed "Error occurs when loading transaction data from other cube". I have already checked permissions for my user, double checked my transformation file and the dimensions, made all conversion files needed and the message has not changed.
Can anybody help me to solve this problem?!
Thanks a lot & Best Regards,
HHHi,
Here, the Transformation File & Conversion File. I have already tested both with another different InfoCube and they work but no for the one needed.
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = ,
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=
ROUNDAMOUNT=
*MAPPING
Category=*NEWCOL(ACTUAL)
P_0BASE_UOM=0BASE_UOM
P_0BUS_AREA=0BUS_AREA
P_0COSTCENTER=0COSTCENTER
P_0FUNDS_CTR=*NEWCOL(null)
P_0GL_ACCOUNT=0ACCOUNT
P_0LOC_CURRCY=*NEWCOL(MXN)
P_0MATL_TYPE=*NEWCOL(null)
P_0VENDOR=0VENDOR
P_DataSrc=*NEWCOL(UPLOAD)
P_ZMATERIAL1=0MATERIAL
P_ZMATERIAL2=*NEWCOL(null)
P_ZMATL_CLASS=*NEWCOL(null)
P_ZMATL_TESP=*NEWCOL(null)
P_ZRATIO=*NEWCOL(KF_inpmdInt)
Time=0CALMONTH
SIGNEDDATA=0TOTALSTCK
*CONVERSION
Time=Time_conv.xls
EXTERNAL INTERNAL
201101 2011.JAN
201102 2011.FEB
201103 2011.MAR
201104 2011.APR
201105 2011.MAY
201106 2011.JUN
201107 2011.JUL
201108 2011.AUG
201109 2011.SEP
201110 2011.OCT
201111 2011.NOV
201112 2011.DEC
Thank you for taking at glance to the files.
Best Regards,
HH -
Error 1 when loading data from flat file
Hi,
I am working on BW 3.5 when i was loading flat file it is giving error 1 when loading external data can anyone solve and mail to me this email id [email protected] .Hi,
I have done correctly but even error 1 data loading from external file is coming, i just clicked on that and it came like this, Error 1 when loading external data,no invalid data like arthematics operations,But file accessing and path is correct.
Message no. RSAR234
Diagnosis
Error number 1 occurred when loading external data:
1. Error when reading the file (access rights, file name, ...)
2. File size or number of records does not correspond to the data in the control file
3. Error when generating the IDoc
4. File contains invalid data (errors with an arithmetic operation or data conversion)
Procedure
Check whether you have the required access rights and whether the data in the control file is correct (file names, record length, number of records, ...). Correct the data in the control file if necessary and check the data file for invalid data (values of the wrong type, values in the wrong format for conversion exit,...). Check whether the file has headers that have not been specified.
Thanks
Sunitha
Maybe you are looking for
-
WPA Enterprise Problem Windows 7; Macs and iPhones working good
Dear Apple Discussions, I have a strange problem within my corpoarte network. I have successfully setup airport base stations with wpa/wpa2 enterprise authentication against an open directory master on apple snow leopard server. Macs and iPhones can
-
Starting Mythfrontend on tv-out - gnome [solved]
I've been running mythtv on KDE3, running it on my TV. I did a full system upgrade and with KDE4, my KDE desktop does not extend onto my tv, although I have a mousepointer on a black background. To hopefully get the system back up and running while
-
Yosemite Mail - Preview list (delete purple text)
Hi guys, I have used updated from Mavericks to Yosemite. What I think is that the Mail app in Yosemite, and especially the reading pane where the conversation is shown, is not that nice. When you reply to an mail in Mavericks you see an conversation
-
Change View Link SQL dynamically
Hi, How i can modify the View Link SQL dynamically? I have View Link CategoryVL and it is working fine with master (CategoryVO) & details (CoursesVO) tables and the two VO's are not based on EO. but i want to add more columns to the View Link SQL in
-
Windows Media File Stops at Start!
Hello Can someone please help. I have a windows media file playing on my stage when the playhead enters the frame. I'm trying to get the WMF to play through to the end and stop, instead of returning to the first frame and stopping. Does anybody know