Error - 41453 while uploading the data

Hi,
I am trying uploading the data with external ID's. I am getting error 41453 and none of the record is getting upload in CRM.
Does any one can share their experience with such error.
Nisman

Glad you figured it out. I thought I'd add my own experience in case it helps anyone. Someone wrote that the data field might have a bad format. Since it's a text file getting uploaded I was kind of scratching my head. (Sorry, I'm not an IT person, so I'm not always sure if I'm doing the right thing.) I had numbers mapped to number fields, text to text, etc. At first I thought everything looked okay. But after looking closer, I realized that I had a currency field where I was trying to import a value that had leading spaces. Once I removed those, it was fine. I know the original source of the data, so I'm not surprised in hindsight. Just be aware that could be the case if the original source data's not formatted. This field was imported into Access as text and stayed that way the whole way through.

Similar Messages

Error occured while uploading the data for Tocde QP01 (BDC)

Hi,
I am facing a strange problem i.e. when i try to upload the data for the Tcode QP01 i am able to upload the data for the 18 rows but when it is more than 18 ,it gives the following error and saves the data upto 18 rows only :-
CALL_TRANSACTION QP01 returncode:     0 RECORD:          0
S Field RC27X-FLG_SEL . not found in loop of screen SAPLCPDI 1400
S Cursor field PLMKB-VERWMERKM (18) does not exist in the screen
S Field PLMKB-VERWMERKM (18) does not exist in the screen SAPLQPAA 0150
S Field PLMKB-STICHPRVER (18) does not exist in the screen SAPLQPAA 0150
S Inspection plan with plan group 12775 for material 200999 is saved
Is there any way to solve this problem...

hi,
Ok,i agree with you but the thing is it was allowing to upload the data for more than 18 rows as there was logic written. It is specified in the code:-
ELSEIF itab1-serial > 18 AND itab1-serial < 35.
              IF index = 19.
                index = 2.
              ENDIF.
Edited by: nav009 on Sep 9, 2009 8:25 AM

Error while uploading the data using FM"upload"

Hi,
I encountering an error while uploading the data using text file with FM " UPLOAD"
The error is "File does not exist or cannot be opened "
But there is a file with name and extenstion right.
Regards
Vishnu

You have to create RC29P-IDNRK(var) using concatenate statement. Try this.
DATA: new_mark TYPE bdcdata-fnam.
CONCATENATE 'RC29P-IDNRK(' var ')' INTO new_mark.
PERFORM bdc_field USING new_mark W_BOM-QTY

Dump While uploading the data in RSA1 from R3 system

Hi All,
We are getting a dump in st22 while uploading the data in RSA1,pls find the details below-:
Error analysis
    Short text of error message:
    Password logon no longer possible - too many faile d attempts
    Long text of error message:
    Technical information about the message:
    Message class....... "RSAR"
    Number.............. 051
    Variable 1.......... "Password logon no longer possible - too many faile"
    Variable 2.......... "d attempts"
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPLRSSM" or "LRSSMU17"
    "RSSM_CALL_RSAR_DATA_REQUEST_1"
I have checked both R3 and BI system there is no user which is currently locked.
also I have checked the SAP Notes 1088927,1066180 ,these notes recommends to upgrade the SAP_BW component to 16 level but we are already running at 18.
Pls suggest
Regards,
Prashant

Hi Prashant
Your system user is unable to authenticate access on the remote system. This may be an issue for RFC user locking. Check the RFC from SM59 for the commection between the two systems. Check for the User ID and password that is saved on the RFC logon.
Also check the system user ALEREMOTE.
I hope this helps
Regards
Chen

Error message while uploading the flat file

Hi Experts,
I am getting the error message while uploading the flat file.
Message class: MG
Number: 147
The message is: Several descriptions exist for the language JA.
Please guide me why this error is occuring.
Regards
Akshay

hi,
how are you uploading the file and where ?
u can use open dataset , read dataset or gui_upload
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e92637c2cbf357e10000009b38f936/frameset.htm

Error 8 while upload the program : row 425 message

Can any one answer this ?
I am not using Any lower case letters any special characteristics in the flat file.
But still i am getting the same error "Error 8 while upload the program : row 425 message "
Thanks

hi padma
or chk this
In case of the flat file datasource, when you assign flat file source system again, the system assign IS to the old transfer structure! Because of the same DS name.
There are 2 remedies.
1. Log off the system. During the current session the system may keep deleted IO, TRs, URs etc and propose them again. Log off should wipe deleted objects.
2. If the #1 didn't help. - Recreate an infosource with a new name. Create all other structures as needed.
reg
ashwin

Error 8 while loading the data from the souce system

Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advance

Hi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

ERROR while uploading the data into ztable with background processing

Hi gurus,
i am trying to upload the data from excel file to internal table
its working fine ..
but........
if i try to upload the data with background processing , in sm37 it is saying "error during the upload of clipboard contents".
Regards,
Sri

Hi,
FM GUI_UPLOAD doesnt work in background, use dataset to upload it from application server.
refer below code
*--Local Variables
DATA : l_file TYPE string,
         l_line TYPE string,
         l_index TYPE sy-tabix.
*--Clear
CLEAR : l_file.
l_file = p_ipfile.
*--Read the data from application server file.
OPEN DATASET l_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
*--Error in opening file
    MESSAGE i368(00) WITH text-005.
ENDIF.
*--Get all the records from the specified location.
DO.
    READ DATASET l_file INTO l_line.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT l_line AT cl_abap_char_utilities=>horizontal_tab
                      INTO st_ipfile-vbeln
                           st_ipfile-posnr
                           st_ipfile-edatu
                           st_ipfile-wmeng.
      APPEND st_ipfile TO it_ipfile.
    ENDIF.
ENDDO.
Regards,
Prashant

While uploading the data

hi
i am uploading the data to su01 to change the password.
while i am uploading passwords with normal characters , password is changed..if i upload passwords with strings it is showing the error "The entered password is not downward compatible (see long text) " .
can any one tell me the reason

Upload into character field and see

Error coming while activating the data request at DSO level

Hi to all,
please can anybody tell me the solution for that.
While activation the data request at DSO level , i am getting error .
Value 'R2S-11.60UML ' (hex. '5200320053002D00310031002E003600300055004D004C00A0') of char
Error when assigning SID: Action VAL_SID_CONVERT table 0MATERIAL
Process 000001 returned with errors
this error is coming under SID Generation .
I shall be thnakfull to you for this.
Regards
Pavneet Rana

Hi Rana,
Activation failed because of the special characters in the Omaterial
Delete the request in target
edit it in the specific record in PSA and load it back
In your case i think its a space problem u can see a space after L
delete the space for the record and load it again
Regards,
MADhu

Error occured while extracting the data from BSIK Table

Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,

Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima

Error encountered while collecting the data from JMS topic bus

Iam encountering a problem while collecting the data from JMS topic bus and pushing the data to BAM.On the DesignStudio window, after I click on “update” button in the plan window to run the plan I get the following exception messages:
IMessageSourceReceiver->messageReceive:
javax.naming.CommunicationException: Connection refused: connect
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
     at
com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at
iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerS
tart(JMSMessageSourceReceiverImpl.java:1001)
     at
iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageRecei
ve(JMSMessageSourceReceiverImpl.java:326)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:426)
     at java.net.Socket.connect(Socket.java:376)
     at java.net.Socket.<init>(Socket.java:291)
     at java.net.Socket.<init>(Socket.java:147)
     at
com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnecti
on.java:682)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSoc
ketRmiTransport.java:58)
     at
oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java
:78)
     at
oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTr
ansport.java:68)
     at
com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.ja
va:646)
     at
com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientCon
nection.java:190)
     at
com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.jav
a:174)
     at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
     ... 5 more
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]

The error msg says that your BAM server cannot connect to your JMS provider. Make sure your configs are all ok, in EL DesignStudio, BAMArchitect EMSdefinition, etc. You can refer to the samples and technotes and tutorials to understand these details. If you are following the steps in the technote etc. pl verify your oc4j container is running, and oc4j version and 'jndi path' is ok. Give the doc name, pg number and step where you are getting this error.

Error while uploading the data

Hi All,
I changed a key figure from integer to a decimal. later i tried loading the masterdata from data source which consists that keyfigure as an attribute.
data is loaded successfully into the PSA but while running the DTP i get the runtime error.
Please see the exact message below:
An error occurred while executing a transformation rule:
The exact error message is:
The argument '-.' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP491CU8AHQLBJJFKFHSN3YZUEB 328

This means incorrect keyfigure value is sent in record from sourcesystem. Please check keyfigure value for that particular record in PSA.
Abhijit

Error - 41453 while uploading the data

Similar Messages

Maybe you are looking for