Error 42 : Datasocket Read Function

Hello,
I have a problem about DataSocket Read Function . I want to read some data from OPC server. I read data and its value 100 as seen in picture dOPCexplorer . But when I give a start Labview .exe as seen Santral Veri Kayıt.vi, I get error 42 about DataSocket Read. Can anyone help me when solving this problem?
Attachments:
LABWIEW.PNG ‏89 KB
OPC SERVER.PNG ‏109 KB
OPC EXPLORER.PNG ‏132 KB

What is the OTHER error on that front panel about? Could the two errors be related?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

Hello,
We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host. Two guests are running Server 2008 R2 and one is running Windows 7. I have the backups going to a dedicated external disk drive.
WSB backs up the two 2008 R2 Hyper-V guests just fine. However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors. I have plenty of space on the external drive as well. I've read this article:
https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
Anyone have any suggestions?

Hi,
As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
First please refer to this article:
Backing Up and Restoring Virtual Machines
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Please check if all following requirements are met. Specifically please check if Integration Service is installed.
Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
Windows 2000: Backup Integration Service is not supported.
The child VM must be in the running state.
The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
All volumes in the child VM are basic disks and there are no dynamic disks.
All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
If you have any feedback on our support, please send to [email protected]

What does this Adobe Muse error message mean: MuseJSAssert: Error calling slector function:SecurityError: Failed to read the 'contentDocument' property from 'HTMLIFrameElement': Blocked a frame with orign "null" from accessing a cross-origin frame.

So what is up with this error message in Muse?
MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.

This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
Cheers,
Vikas

Datasocket Read error 56

Hello all,
Currently I am working on a project of 350+ VI's used for controlling water filtration installations. The hardware is adressed through the Datasocket VI's (linked to OPC items).
The initialisation of all digital and analog channels (fieldpoint) is executed without any errors. During the first read loop of the analog channels I get error 56 on the datasocket read VI (primitives in 7.1)
"The network operation exceeded the user-specified or system time limit."
I have no idea at all what this error means or how I should solve this situation. What I do now is that when I stop and restart the program no error is seen. When I close Labview completely and start the program again the error will occur again.
It would seem something
is wrong with the initialisation but I isolated the daq part of the program and if this one is ran no error's will occur in any situation.
Does anyone have a clue on what could be the cause of the error in relation to the datasocket VI's (OPC)??
Thanks in advance..

Hi Marce,
This seems to be more of an IT/Networking issue. Here is some info from the other thread:
"After further debugging, it turned out that this was indeed a "timeout" issue. Because there was no DNS server, the VI was taking about 25 seconds to find the other machine on the network. This delay only occured the first time the VI tried to read from the remote server. Subsequent calls were much faster even though I was still opening the url everytime (instead of storing a reference and reading from it). Labview must be doing some caching. The way that I fixed the problem was by specifying a timeout of 60 seconds (default is 10 seconds which why it was timing out)."
also:
"Use the IP address in the path instead of the computer name. Then the DNS server will be bypassed."
Travis H.
LabVIEW R&D
National Instruments

Error : MustJSAssert: Error calling selector function: TypeError: Cannot read property

Im getting an error : MustJSAssert: Error calling selector function: TypeError: Cannot read property 'style' of null'
- with each page selection on the nav bar
here is the link
http://http-shipleybusinesscatalystcom.businesscatalyst.com/index.html

I'm unable to reproduce the error message at your site (on any of the pages) as tested in multiple browsers on a Windows machine. What browser (with version)/OS/Muse version are you using?
However, the most likely cause of the error message is the pinned menu at your site. Refer to a similar thread here - http://forums.adobe.com/thread/1117058
If the problem persists at your end, please try clearing your browser's cache/history/cookies and re-try. Also try a different browser in order to isolate the issue to a specific browser (version).
Thanks,
Vinayak

MuseJSAssert: Error calling selector function:TypeError: Cannot read property 'msie' of undefined. Please help me in this.

MuseJSAssert: Error calling selector function:TypeError: Cannot read property 'msie' of undefined. Please help me in this.

Hi
Please check the following thread,
Re: MuseJSAssert: Error Calling Selector Function:[Object Error]
Do let me know if you have any question.

LR 5.3 has stopped functioning. Message : LR encountered an error when reading fromit's previous cac

LR 5.3 has stopped functioning. Message Lightroom encountered an error when reading from it's previous cache and needs to Quit. Re boot comes backtio the same message how do I get the software back?

Thanks, it makes sense but I am a little worried about the files that are coming up for lr catalog. In order to process today's photos I opened a new catalog and that went well -- up to Smugmug and out to the client. but the only other file with today's (date which is when I had the problem -- power failure while I was importing) -- is not a previews file but in fact the corrupt lr.cat.
the rest listed including previews are dated 2012. Am I not looking in the proper place.
Thanks for your help
Bill

After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up.

I upgraded to Firefox 3.68 about four days ago. After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up. I click "OK." Nothing seems to happen, either good or bad.
I installed Comodo Internet Security a few days before I upgraded to Firefox 3.68.
== This happened ==
Every time Firefox opened
== After I upgraded to Firefox 3.68.

I am the original poster. The problem seems to have nothing to do with my upgrade to Firefox 3.6.8 but with a configuration change I made to System Mechanic after I switched to Comodo Internet Security.

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Can I put a READ function in a TRUE/FALSE case structure?

Hi,
I have a vi that operates as controller for a mechanical system of motors. There are several sensors of various types, that provide input to the vi, including encoders, whose period is being measured. The attached vi is the encoder period measuring part. It measures 15 periods and tells me the average of the 15 with each loop iteration.
In my application, the encoder period measurement is not needed unless the vi knows that ALL THE OTHER sensors in the hardware configuration are measuring values within the desired range. For example, Sensors A, B and C should all measure between 5-10. If they are all showing values between 5-10, then, we want the encoder value to read and display. If only one of the sensors, say A, is measuring 12, then, we don't want the period value to READ or be subsequently processed. So, it is easy to set up the sensors A, B, C, to give a TRUE or FALSE based on whether they are within range or not, and if all 3 are TRUE, then, that value can easily be passed to the case structure that holds my READ function for the period. Is this a good way to do this? The goal is to eliminate unnecessary execution time that the period READ function would consume, as well as all subsequent calculations that are performed on the period value collected. The period data is of no use if any one of the other sensors is not in the correct range.
If any one of the other sensors is out of range, we want to skip the encoder READ step altogether. So, it is easy to structure a BOOLEAN in my vi as shown in the attachment. If I do it this way, will it throw an error, or just skip the READ until the BOOLEAN is true again? Is there a better way to prevent the READ from happening if one of my other sensor values is not within the correct range?
Thanks,
Dave
Solved!
Go to Solution.
Attachments:
forum JUly 18.vi ‏26 KB

Sure, you can put a Read inside a case structure. For your application, just check that your sensors are all within range (Comparisons palette), then AND the T/F's and use the result of that for your case structure. (If you are already doing the in-range check, I can't see it here because you have 5 subVIs that I cannot open here.
Cameron
To err is human, but to really foul it up requires a computer.
The optimist believes we are in the best of all possible worlds - the pessimist fears this is true.
Profanity is the one language all programmers know best.
An expert is someone who has made all the possible mistakes.
To learn something about LabVIEW at no extra cost, work the online LabVIEW tutorial(s):
LabVIEW Unit 1 - Getting Started
Learn to Use LabVIEW with MyDAQ

EHPI installer: Error while reading a dynpro. Stuck at Start Shadow First.

Hi Everyone,
I am dead in the water with my test install of EhP5 using the most current installer. This small test is on an older iseries, V5R4 with 8G memory. The SAP version is ECC 6.0 at sp Basis 23 and Applications at 19.
The install stops at Start Shadow First, but the instance and work processes are up on the server.   The log- SAPehpiConsole reads:
Severe error(s) occured in phase MAIN_SHADOW/START_SHDI_FIRST!
Last error code set: RFC call to upg_is_shadow_system failed with key
RFC_ERROR_SYSTEM_FAILURE (open): Error while reading a dynpro
Please refer to these logs in the posted replys following this post for readability.
The shadow system work process wp01 log showsan RFC error as follows:
Wed Sep 14 11:29:58 2011
ABAP Program SAPMSSY2                                .
Source                                          Line 0.
Error Code DYNPRO_READ_FAILED.
Module $Id: //bas/720_REL/src/krn/dynp/dyrdypdb.c#3 $ SAP.
Function dy_dbread Line 100.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end no http/smtp
RABAX: end RX_BTCHLOG RX_VBLOG
Error while reading a dynpro.
C Wed Sep 14 11:33:59 2011
C *** ERROR => SQL-Error -204 in function db_open (dbsldb4.cpp 10630)
C {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=}_0
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
C Reopen: FALSE
B *** ERROR => dbdynpdb2: dbdd_dbtab_columns (DYNPSOURCE) failed with rc = 4
dbdynpdb2.c 2506]
B {root-id=4E6F19A9A5F02851E10080020A7F0064}_{conn-id=00000000000000000000000000000000}_0
B ***LOG BZY=> unexpected return code 4          calling dbdd_dbtab [dbdynpdb     2508]
So I have a problem communicating with the shadow. Or is it a problem with the db_open?
From the test system I have an entry in SM59 to the shadow and I get this error when trying a connection test.
Error Details     Error while reading a dynpro.
And trying to logon to the client sends the same message, it does not bring up the login screen.
OK. So in the 3 weeks that I have restarted, re-set and completely restored and restarted the install, I have always come to this point. I have search for similar issues and have done a review of pertinent notes etcu2026    Just as a comment, last year I successfully did the Ehp 4 upgrade without many problems on this same system using last years SAP system.   In the month that I have been trying to do this, SAP has replaced the EHPI installer 3 times which indicates some problems on their part.
Any comments or suggestions would be greatly appreciated.
Pat

The 2 logs from the installer are here.
The STARTSFI is as follows:
1 ETQ201 Entering upgrade-phase "START_SHDI_FIRST" ("20110913144811")
4 ETQ399 Set environment for standard connect:
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '14', GwService = 'sapgw14'
4 ETQ399 Environment variables:
4 ETQ399   dbs_db4_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=0
1 ETQ206 Executing pre-phase DB specific actions.
3 ETQ399 Fixing IFS authorities for '/usr/sap/TEH/EHPI/abap/exe'
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ200 Executing actual phase 'MAIN_SHADOW/START_SHDI_FIRST'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'DEVTRACE.LOG'
4 ETQ399 Set environment for shadow connect:
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '15', GwService = 'sapgw15'
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ399   default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWI
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="TEH", Nr="15", GwHost="omni", GwService="sapgw15"
2 ETQ231 RFC Login failed
repeats the rfc call with a fail until this final entry.
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
The DEVTRACE.LOG is here:
$                               Directory:    /usr/sap/TEH/EHPI/abap/log
Name:         DEVTRACE.LOG
trc file: "dev_disp.new", trc level: 1, release: "720"
sysno      15
sid        TEH
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    100
intno      20020600
make       single threaded, ASCII, 64 bit, optimized
profile    /usr/sap/TEH/EHPI/abap/TEH/SYS/profile/TEH_DVEBMGS15_omni
pid        75851
kernel runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
length of sys_adm_ext is 376 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (15 75851) [dpxxdisp.c   1287]
#shared lib "dw_xml.so" version 100 successfully loaded
#shared lib "dw_xtc.so" version 100 successfully loaded
#shared lib "dw_stl.so" version 100 successfully loaded
#shared lib "dw_gui.so" version 100 successfully loaded
#shared lib "dw_mdm.so" version 100 successfully loaded
#shared lib "dw_rndrt.so" version 100 successfully loaded
#shared lib "dw_abp.so" version 100 successfully loaded
#shared lib "dw_sym.so" version 100 successfully loaded
#shared lib "dw_aci.so" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
rdisp/dynamic_wp_check : 0
rdisp/calculateLoadAverage : 1
Tue Sep 13 14:48:58 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6404]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >omni_TEH_15                             <
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000050000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000050000010
DpShMCreate: allocated wp_adm_list at 700000050002970
DpShMCreate: allocated wp_adm at 700000050002b60
DpShMCreate: allocated tm_adm_list at 700000050006f90
DpShMCreate: allocated tm_adm at 700000050006fe0
DpShMCreate: allocated wp_ca_adm at 7000000504c6070
DpShMCreate: allocated appc_ca_adm at 7000000504d3b40
Directory:    /usr/sap/TEH/EHPI/abap/log
Name:         DEVTRACE.LOG
DpShMCreate: allocated comm_adm at 7000000504e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000005056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000005056e110
DpShMCreate: allocated j2ee_adm at 70000005056e150
DpShMCreate: allocated ca_info at 70000005056e950
DpShMCreate: allocated wall_adm at 70000005056e9d0
DpCommAttachTable: attached comm table (header=7000000504e1610/ft=7000000504e1620)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (3 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsStdUnamFileMapInit: ES base = 0x7000000a0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
Tue Sep 13 14:48:59 2011
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   13097]
Tue Sep 13 14:49:02 2011
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( omni) [dpxxdisp.c   12339]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >omni_TEH_15                             <)
DpStartStopMsg: start msg sent
Tue Sep 13 14:49:11 2011
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: start to initalize 3.X shared alert area (first segment).
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
Tue Sep 13 14:50:24 2011
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms.new", trc level: 1, release: "720"
[Thr 01] Tue Sep 13 14:48:39 2011
[Thr 01] MsSOsPrivInit: Run priority adjusted to 12
[Thr 01] ms/http_max_clients = 500 -> 500
[Thr 01] MsSSetTrcLog: trc logging active, max size = 52428800 bytes
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    92
intno      20020600
make       multithreaded, ASCII, 64 bit, optimized
pid        75850
[Thr 01] Tue Sep 13 14:48:40 2011
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 75850) [msxxserv_mt. 2274]
[Thr 01] SigISetDefaultAction : default handling for signal SIGCHLD
[Thr 01] load acl file = /usr/sap/TEH/EHPI/abap/TEH/SYS/global/ms_acl_info
[Thr 01] MsGetOwnIpAddr: my host addresses are :
[Thr 01]   1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
[Thr 01]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 01] MsHttpInit: full qualified hostname = omni.plastekgroup.com
[Thr 01] HTTP logging is switch off
[Thr 01] MsHttpOwnDomain: own domain[1] = plastekgroup.com
[Thr 01] *** I listen to port 3615 (3615) ***
[Thr 01] CUSTOMER KEY: >H1357713078<
[Thr 01] build version=720.2011.05.04
trc file: "dev_rd", trc level: 1, release: "720"
Tue Sep 13 14:49:07 2011
***LOG S00=> GwInitReader, gateway started ( 75855) [gwxxrd.c     1758]
systemid   327 (IBM i with OS400)
relno      7200
patchlevel 0
patchno    96
intno      20020600
make       single threaded, ASCII, 64 bit, optimized
pid        75855
gateway runs with dp version 131(ext=118) (@(#) DPLIB-INT-VERSION-131)
gateway (version=720.2011.04.20)
Tue Sep 13 14:49:10 2011
gw/reg_no_conn_info = 1
gw/local_addr : 0.0.0.0
gw/reg_no_conn_info = 1
SWITCH TRC-RESOLUTION from 1 TO 1
CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
CCMS uses Shared Memory Key 73 for monitoring.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Tue Sep 13 14:49:13 2011
CCMS: Initalized shared memory of size 40000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: AlMsUpload called by wp 1002.
CCMS: AlMsUpload successful for /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/log/ALMTTREE (0 MTEs).
Bind service sapgw15 (socket) to port 3315
GwIRegInitRegInfo: reg_info file /usr/sap/TEH/EHPI/abap/TEH/DVEBMGS15/data/reginfo not found
GwPrintMyHostAddr: my host addresses are :
1 : [10.127.0.100] omni.plastekgroup.com (HOSTNAME)
2 : [127.0.0.1] LOOPBACK (LOCALHOST)
Full qualified hostname = omni.plastekgroup.com
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpIPCInit2: read dp-profile-values from sys_adm_ext
DpShMCreate: sizeof(wp_adm)##17440#(1744)
DpShMCreate: sizeof(tm_adm)##4976768#(24760)
DpShMCreate: sizeof(wp_ca_adm)##56000#(56)
DpShMCreate: sizeof(appc_ca_adm)#56000#(56)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/576048/576064
DpShMCreate: sizeof(comm_adm)##576064#(1136)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)##0#(104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)##0#(80)
DpShMCreate: sizeof(vmc_adm)##0#(1856)
DpShMCreate: sizeof(wall_adm)##(25648/36736/64/104)
DpShMCreate: sizeof(gw_adm)#48
DpShMCreate: sizeof(j2ee_adm)#2032
DpShMCreate: SHM_DP_ADM_KEY##(addr: 700000060000000, size: 5759216)
DpShMCreate: allocated sys_adm at 700000060000010
DpShMCreate: allocated wp_adm_list at 700000060002970
DpShMCreate: allocated wp_adm at 700000060002b60
DpShMCreate: allocated tm_adm_list at 700000060006f90
DpShMCreate: allocated tm_adm at 700000060006fe0
DpShMCreate: allocated appc_ca_adm at 7000000604d3b40
DpShMCreate: allocated comm_adm at 7000000604e1610
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 70000006056e060
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 70000006056e110
DpShMCreate: allocated j2ee_adm at 70000006056e150
DpShMCreate: allocated ca_info at 70000006056e950
DpCommAttachTable: attached comm table (header=7000000604e1
MtxInit: -2 0 0
DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 fro
Tue Sep 13 14:50:14 2011
GwDpInit: attached to gw_adm at 70000006056e110
Tue Sep 13 14:50:16 2011
DpSetProcessPriority: Run priority for gwrd adjusted to 12

Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."

Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."Help
Please

Stan Blumberg wrote:
I have deleted the file but the message persists even after restarting the computer....any advice??...I am using LR 5
You don't delete a file, you have to delete a folder. Is that what you did?
If you deleted the folder specified above, and you still get the message, then it's the wrong folder. Use your operating system's search function and find ALL folders on ALL disks whose name ends with Previews.LRDATA, delete each one found, and then try opening Lightroom.

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

Urgent Help Req.: Exception=ORABPEL-11162 Error while reading native data

Hi All,
I am getting below error: Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7|http://forums.oracle.com/forums/] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
Let me also give you the brief scenario of what I am trying to achieve.
INTERFACE FUNCTIONING:_
I have an interface which reads the records in a file in a chunk through ChunkRead adapter and and after one successful reading if chunk it calls the DB adapter to insert the records in the table.
Now these records are committed and next chunk is read and the process goes on till all the records are read.
After this the API is called which does the processing of these records.
Inserting records in the DB is a XA transaction which means if anything goes wrong while inserting the data, the records which are added earlier are rolled back.
ISSUE:_
Now the issue comes when I do the negative testing. Since my file is based on fixed length schema., I change the length of last record from 15 to 13. (say total are 10 records)
Now what happens is when chunkread tries to read the record of 15 length it gets only 13 characters and hence ignores the records.
But the chunkread reads all other 9 records correctly and sends this to DB adapter which now inserts them correctly in the DB.
But being a global transaction I want that if any record is missing from DB in comparison to those in file then whole transaction should roll back.
So I am unable to make this whole process as global transaction. This is because the ChunkRead adapter inspite of detecting the error doesn’t throw it back.
Moreover if this problem occurs in say next chunk then also I am unable to find out how to rollback the whole transaction. Because the first chunk was correct.
So basically two concerns are there:+
How to detect that chunkread adapter has missed one record?+
Secondly, If it’s detected then how should I rollback the transaction that caused earlier records to enter into database?+
Please let me know if anyone has faced this issue earlyer and how it got resolved. Any pointers regarding this would be of great help.
Also attached is the chunkread log for reference.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage errList=[oracle.tip.pc.services.translation.xlators.nxsd.ErrorList@a5213b]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.466-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: FileRejector::rejectTextualMessage badCount=[1]</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2008-10-06T09:23:58.467-04:00</TSTZ_ORIGINATING>
<COMPONENT_ID>tip</COMPONENT_ID>
<MSG_TYPE TYPE="TRACE"></MSG_TYPE>
<MSG_LEVEL>1</MSG_LEVEL>
<HOST_ID>usmlrh01.xyz.com</HOST_ID>
<HOST_NWADDR>192.168.245.39</HOST_NWADDR>
<MODULE_ID>esb.server.service.impl.inadapter</MODULE_ID>
<THREAD_ID>57</THREAD_ID>
<USER_ID>orasoa</USER_ID>
</HEADER>
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID>192.168.245.39:29832:1223297491683:44</UNIQUE_ID><SEQ>130</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>JCA: Rejecting message fileName=/rh01/s01/n01/Distributions/B2B/Gentran/In/855/Test.txt, startLine=4, startColumn=1, endLine=-1, endCol=-1, Exception=ORABPEL-11162
Error while reading native data.
[Line=6, Col=7] Not enough data available in the input, when trying to read data of length "22" for "element with name PurOrderNum" from the specified position, using "style" as "fixedLength" and "length" as "22".
Ensure that there is enough data from the specified position in the input.
}</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
PFB the version details :
SOA suite version : 10.1.3.3.1 and JDEV : 10.1.3.3
Edited by: SOA Team on Oct 6, 2008 10:48 PM

Just a thought, you could set the terminator for the last field as {eol} instead of length, this means that it should read the last field regardless of the length.
Depending on the logic of Db adapter the error could be traped due to incorrect length.
If the file starts each row with a constant(s), e.g. 01 then you can terminate the previous line on that, this is the better option but relys on the file format.
The other option is a little thing call compensation, ouch. Basically this allows you to back out commited rows but you have to provide all the logic, it is generally something people avoid because of the complexity.
cheers
James

Error 42 : Datasocket Read Function

Similar Messages

Maybe you are looking for