Error -42408 after upgrade to itunes 10.5

I have just updated itunes to 10.5 and I am now receiving the error -42408 when starting itunes.
I am running snow leopard on a 2nd gen macbook air

Try this article. http://forums.macrumors.com/showthread.php?t=445821. Hope this helps!

Similar Messages

  • Error 42408 after upgrading itunes

    I just followed the prompt to upgrade my itunes to the latest version. After the installation I am getting a popup that says "This computer is no longer authorized to play purchased items that are on the ipod [my name]. Would you like to authorize this copmuter for items purchased from the iTunes store? If you do no authorize this computer, 224 items . .. will be removed from the iPod." Then when I click "Authorize," and put in my password, I get the following error message: "We could not complete your itunes store request. An unknown error occurred. (-42408)" In smaller letters it then says: There was an error in the itunes store. Please try again later." When I clear that screen I am back to the popup screen. So far I have not detected that anything has been removed from my iPod, but I have not tried clicking "Cancel" or "Don't Authorize" on the popup screen. So the popup screen is just staying there, asking me if I want to authorize this computer. How to clear this problem? It almost makes me want to ignore future requests to upgrade iTunes...

    sorry.. posted to wrong place .. I'll repost

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • TS1424 Error 3212 after upgrading to Itunes 11.01

    Error
    Itunes could not connect with the I tunes store. An unknown error occured (-3212).
    Make sure your network connection is active and try again.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How I survided Error 1418 after upgrading to itunes 7.0.2

    IT WORKS AGAIN !!!!!!!
    Problem
    5.0 Gen ipod, upgraded to itunes 7.0.2 and got an icon at my ipod with a folder shape. Connecting the ipod gaves a "corrupt ipod" message. Trying to restore ipod gave a 1418 unknown error, tried many things like format the ipod at different levels without success.
    Tried solutions for 3 days, I gave up and was about to purchase a Zune (didn't find my purchase receipt to claim warranty) but NOW I MADE IT WORK AGAIN!!!
    -Uninstalled 7.0.2 and rebooted the PC
    -Downloaded and installed itunes 7.0.1
    - Boot the ipod in disk mode (press menu and play when the apple appears, then a “disk mode” sign appears
    - connected and let itunes detect the ipod as corrupt, then clicked on restore
    I’ll stay with 7.0.1 forever, but at the end I now have my ipod working again

    There was a Windows block on me installing quicktime + itunes when I first got the ipod and what I did was googled for awhile and found a site that lets you download any version of itunes, and then I upgraded. I forget the link though but its not too hard to find.

  • ITunes Error 42408 After 9.03 Upgrade

    I am receiving the error 42408 after upgrading to 9.03. Google did not yield any results. The error appears attempting to authorize my Powerbook.

    I had the same problem. Check the version of iTunes via the About dialog. Mine said 9.0.2 despite having upgraded via system updates, itunes and even downloading the whole package again.
    Turns out, the dock iTunes link is running the old one. Basically, remove it from the dock, and re-drag the itunes from the applications folder back onto the dock. This then started 9.0.3 for me, and my iTunes account worked, the itunes store worked and iphone sync worked as well. Phew.
    Check the bottom of this page for my reference http://support.apple.com/kb/HT2311

  • I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

    I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes.  The drivers are up to date
    Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
    Dell Inc. Latitude E6420
    iTunes 12.0.1.26
    QuickTime 7.7.6
    FairPlay 2.7.39
    Apple Application Support 3.1
    iPod Updater Library 12.0
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 8.0.5.6
    Apple Mobile Device Driver 1.65.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 3.06.0.2770
    Gracenote MusicID 3.06.0.2770
    Gracenote Submit 3.06.0.2770
    Gracenote DSP 3.06.0.2770
    iTunes Serial Number 756D13C00C3583C8
    Current user is not an administrator.
    The current local date and time is 2015-01-13 14:47:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 12.0.1.26 (x64) is currently running.
    iTunesHelper 12.0.1.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    LowerFilters: SbCeCd (3.2.6.3),
    UpperFilters: GEARAspiWDM (2.2.3.0),
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Drive is empty.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
    F: HL-DT-ST DVD+-RW GU40N, Rev A103
    Audio CD in drive.
    Failed Reading table of contents, error 4000.
    Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
    Audio CD reading failed. Error Code:   87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
    iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
    Get drive speed failed. Error Code: 4000.
    The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

    Hi iTunes-1,
    Welcome to the Support Communities!  The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.  
    iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
    http://support.apple.com/en-us/HT201852
    Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
    To run CD Diagnostics, follow the steps in this document.
    After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
    Here is an example of what section three might look like:
    In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
    If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
    If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
    Run CD Diagnostics again.
    Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
    Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
    Last Modified: Nov 8, 2014
    Also, you mentioned that you have been successful burning a CD with the Windows OS.  Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive.   Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
    I hope this information helps ...
    - Judy

  • I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

    I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
    I wiped it out and restored from backup but I am still getting the same message.

    I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
    ~~~
    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
    ~~~
    Good Luck!
    ~R

  • Error -42408 after downgrade n iphone content unreadable

    Hi,
    I recently deleted the new itunes 11 from the apps folder, downloaded and installed the old itunes 10.7 in it's place instead. But everytime I start itunes, I get the error -42408 and itunes keep telling me it cannot read the content of my iphone and I have to restore it. This never happened prior to the upgrade to version 11 so I am thinking it's a problem with the downgrade?
    Is there something I am to delete or??
    Thank You.

    What you need to do depends upon how you did the downgrade.
    =Downgrading from iTunes 11 to iTunes 10.7=
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. Check this reference on how to delete the iTunes application itself:
    Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
    After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064

  • QuickTime in Safari cannot play video after upgrading to iTunes 10.2

    After upgrading to iTunes 10.2 and QuickTime 10 on my MacBook Pro, the latest Quicktime version embedded in Safari is behaving strangely. When I want to play video on certain websites like " http://www.lynda.com/Aperture-3-tutorials/essential-training/59221-2.html ", the Quicktime logo on Safari browser appears and just sits there with sound only. I tried it on Firefox, the video can only be played on the lower part of my suddenly splitted screen, there is an "error" message on a Quicktime logo background.
    Could anybody help me solve the problem. By the way, all these videos can be played normally on my Windows 7 desktop using both Firefox and Safari for Windows.

    To make the matter more weird, the QuickTime plays normally on my Safari after I log out and switch to the administrator account of the MacBook Pro. When I change back to a normal account, the QuickTime error takes place again. It seems there must be something I configured wrongly.

  • Anyone having issues with USB port power after upgrading to iTunes 11.1?

    After upgrading to itunes 11.1, I can no longer use the USB ports on my wired keyboard to synch my iPhone 4s, ipod Nano, and Ipad 2.  Previously, I could use this port to synch and charge the nano and iphone, and synch (but not charge) my iPad.  Now I simply get an error when I attach any of the devices ("a usb device needs more power").
    I currently use all four of the USB ports on the back of my imac (UPS power supply, aformentioned keyboard, a Lacie backup drive that has its own power supply, and a superdrive).  Interestingly, when I unplug the Superdrive (which is plugged directly into the mac on a separate USB port), the USB port on the keyboard will work.  Unplugging any of the other 2 devices does not allow the port on the  to work.
    I bought the wired keyboard to have the easily accessible UBS port to synch my nano as well as the fact I needed a number pad. 

    Get yourself a good self-powered 7 port USB hub to plug your extra devices into.
    Belkin International, Inc F4U041v - Best Buy
    PROVANTAGE: Belkin F5U237-APL-S Hi-Speed USB 2.0 7-Port Hub for Apple #TB857LL/A
    NewerTech USB2HB7PRO 7 Port Hi-Speed USB 2.0 Hub... in stock at OWC
    MacAlly TRIHUB7 TriHub - 7 Port Hi-Speed USB 2.0... in stock at OWC

  • Error message after upgrading to 7.3

    i upgraded to iTunes 7.3 and i got a message that said something about some files were missing and i needed to uninstall and try again. i uninstalled it and now i can't even download iTunes. i can download but i can't do anything else. anybody else having this problem?

    Yes, i had the same error message after upgrading to 7.3.
    I am using windows XP - i went to the Control Panel -> Add/Remove Programs -> Scrolled to iTunes & clicked on Change (not Remove), then clicked Repair. It all works fine after that.
    Search this forum - i hope you find a solution.

  • Lost music files after upgrading to itunes 7

    Hi, can someone please confirm whether or not my music files have been physically deleted from my computer after upgrading to itunes 7. Many of the songs in my playlist, including MOST of the songs purchased through itunes come up with the error that the original file can't be found. I've done searches and can't come up with the files.
    I want to know if they are indeed gone.
    I realize that you click "I agree" to the agreement before installing and as of now this "contract" has held up. However, we'll see how well it holds up when offered software is knowingly removing personal files. I'm sure that if someone were to write a virus that destroys your computer, if it had a warning message with an "I agree" button, it would be a very difficult contract to stand by.
    To my recollection, no software in the past has physically removed personal files from your harddrive on install.
    So, I don't think a precedence has been set for this kind of class action.

    and we refresh.

  • After upgrading to itunes 10.5, and connecting ipad 2, message appears " IPAD cannot be used it requires itunes 10.5 or later. Go to itunes store and download the latest version." I am windows xp user.

    After upgrading to Itunes 10.5 and connecting the IPAD. I get a following message. How do I resolve this issue. There is no other way to download itunes to ipad other than the itunes on your computer or laptop. I am a windows xp user.

    Dear Mr. Sawyer,
                                To my surprise, the version is shown as 10.0.1.22. I will uninstall itunes and try loading the same again. After uninstalling do we need to delete any registry entries for Windows XP.
    Thanks for your response and concern.
    Regards
    Amit Samel

  • Some mp3 files do not play after upgrading to iTunes 8.0

    some mp3 files do not play after upgrading to iTunes 8.0
    have upgraded and some songs which used to play on iTunes 7 no longer play. album art is missing. when trying to play on of these songs, nothing appears in the playbar at the top of the window.
    it seems the same problem exists in the mac os environment.

    The solution I discovered to fix this problem was to create a smart playlist with all song of a kind containing MPEG. Then I went through album by album, and coverted ID3 tags using the value of NONE. This then enabled me to play the songs in iTunes 8.0 and in many cases restored the Album Art.
    Thanks!

Maybe you are looking for