Error 4265.. anyone know what it is?

I have tried to burn 2 different playlists 10+ times and i keep getting an error 4265.. anyone else had this error and know how to fix it?

try this it fixed it 4 me...I went under My Computer, then right clicked on the cd drive that I used to burn, go to properties, went under the auto play tab, selected the action to perform button for each individual category(dvd, blank cd, music cd) selected the no action icon for each category. Then went to the recording tab and unselected the enable recording selection. Now I can burn every time! If this fixes it for anyone else let me know!
Jr

Similar Messages

  • Error 13005 Anyone know what is going on?

    When I try to run iTunes I get the above error. Even when I tell itunes to create a new library by holding down shift when I click on itunes, it still gives me this error. Anyone know what is going on?

    Hello, I get that error message "iTunes error 13005". I have my itunes database on an ext HD, I completed an update yesterday from Apple and my itunes wont open on my computer, giving me the above error message. I have read the resolutions offerred in the thread but I not been successfull in solving the problem. I have deleted the Genius and extras files, rebooted the computer and still the same message. I dont think it is anything to do with the iTunes update as it had the same effect on another computer here that had been update. I think it is something to do with the Ext HD and possibly the extreme WiFi router and it's firmwire update.
    Did you resolve your problem?
    Thanks
    Chris

  • My Ipad says it needs restoring but when I try comes up with 3194 error - does anyone know what I need to do? Can't even turn it on!!

    My Ipad says it needs restoring but when I try to do this through itunes it comes up with error 3194? Anyone know what I need to do? I can't even get the ipad to turn on just has a sign saying plug into itunes

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I can't install itunes.  I get an error code 2894 with a message stating that the installer has encountered an unexpected error.  Anyone know what I need to do?

    I can't install itunes.  I get an error code 2894 & a message that states the installer has encountered an unexpected error installing this package.  Anyone know what I need to do to fix this? 

    Are you able to uninstall iTunes and QuickTime?
    You might have to search for the Windows Installer Cleanup Utility, which would allow you to remove some applications that you can't from Control Panel.
    Also, take a look at this Apple document -> Trouble installing iTunes or QuickTime for Windows.

  • System Extension error does anyone know what this means.

    Does anyone know what this means.
    /System/Library/Extension/ATTOExpressRAID_Enabler.kext

    Using google and entering "ATTOExpressRAID_Enabler.kext" I came across this page. Maybe something there can help:
    "http://macosx.com/tech-support/mac/system-extension-cannot-be-used/4208.html
    In particular DeltaMac's answer seems to be the answer you are looking for.

  • HT204406 when i open itunes i get an error (4002) anyone knows what that means. and how to remove it.

    when iopen itunes i get an error (4002) anyone konws what that means. how do i fix it.

    Hello rcrown01,
    The following articles can help get iTunes back to burning.
    Can't burn a CD in iTunes for Windows
    http://support.apple.com/kb/TS1436
    iTunes for Windows: Additional troubleshooting tips for burning issues
    http://support.apple.com/kb/TS1374
    Cheers,
    Allen

  • When i connect my nano it says unknown error -53 anyone know what to do?

    When i connect ,my nano (been in a drawer for several months) i get an unknown error message -53.  Has anyone else gotten this? do you know what to do?

    I had the same problem and resolve it by turn my iPod into disk mode:
    http://support.apple.com/kb/ht1363
    you can have a try.

  • Aperture - Thread 10 Crashed Error - Does anyone know what this means?

    I'm trying to get Aperture to work. I have 2.1.3 installed and I'm using 10.5.7 on a 2.4 Dual Core MacBook Pro (2GB).
    The application crashes anytime I click on the "+" sign on the Projects or Adjustments tab. Then, I get a general error message that just says the application has quit unexpectedly.
    This issue happens with every photo...and even when a photo is not open. Aperture 2 has never work and I've reloaded several times. I've also removed all plug-ins and logged in under a different profile. I'm stuck.
    When I click on the "Report" button in the error message window the "Problem Details"tab says the following (summarized)...
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000000
    Crashed Thread: 10
    Thread 10 Crashed:
    0 libSystem.B.dylib 0xffff07c7 __memcpy + 39 (cpu_capabilities.h:246)
    1 libSystem.B.dylib 0x916c8613 task_info + 504
    2 com.apple.Aperture 0x005a5f4f 0x1000 + 5918543
    3 com.apple.Aperture 0x005a5fe7 0x1000 + 5918695
    4 com.apple.Aperture 0x003252f4 0x1000 + 3293940
    5 com.apple.proxtcore 0x00910051 describeMsgCode + 12256
    6 com.apple.proxtcore 0x008fa383 XTCoreInit + 6053
    7 com.apple.proxtcore 0x0090b0a8 setFreePerfTokenFunction + 19881
    8 com.apple.proxtcore 0x008fe66a threadSuspendedCountDiff + 8110
    9 com.apple.proxtcore 0x008fe35f threadSuspendedCountDiff + 7331
    10 com.apple.Foundation 0x92be8e0d -[NSThread main] + 45
    11 com.apple.Foundation 0x92be89b4 _NSThread__main_ + 308
    12 libSystem.B.dylib 0x91622155 pthreadstart + 321
    13 libSystem.B.dylib 0x91622012 thread_start + 34
    Can anyone tell me what my issue is or where I can go to resolve? The folks at the local Apple store were no help.
    thanks!
    Tom
    Message was edited by: Tom From San Diego
    Message was edited by: Tom From San Diego
    Message was edited by: Tom From San Diego

    Yes, I had to do the same thing last year after purchasing Aperture 2. It drove me crazy. It's a shame because I miss my Mirra, it worked great with my Mac and my PCs on the same network.

  • HT201210 I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    I have an unknown error (1621) and my iPod is not being recognised in iTunes or the Finder, even in Disc mode.  Anyone know what's going on?

    Try and force iPod into Recovery Mode:
    1. Turn off iPad
    2. Connect USB cable to computer; leave the other end alone
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPod
    Note: You need to be patient and repeat the above many times to recover your iPad

  • I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

    Hello Drake, I suspect one or more of the Drives needs repairing, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imaging something not being covered there.

  • Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS

    Does anyone know what the "Provision Failure: MEDIATION-5, Lrad! errors are in WCS? 
    I get this when pushing an AP template to six new 3502i series access points.  The error reads like this:
    *** Apply Result for AP 'NameOfAPhere(C0:FF:EE:C0:F:EE)' ***
    **AP Parameters**
    Provision Failure: MEDIATION-5, Lrad!C0:FF:EE:C0:F:EE,secondaryMwar,No access
    MAC address has been changes to protect the names of the innocent...
    The rest of the template appears to push.  The 802.11a/n and 802.11b/g/n parameters show "success".
    Anyone have the magic decoder ring for what these messages are referring to so that I can go fix the issue?
    Thanks in adavance!

    Hi,
    Two things :
    1- Can you refresh configs from WLC to WCS and then give it a try ?
    2- Is WCS using the right read-write community string for this WLC ?
       (Since we see a "No Access" message in the error)
    Thanks..Salil

  • On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server".  I don't have any problems with iCloud on my laptop / PC.  It works fine... Does anyone know what the problem could be?

    On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server".  I don't have any problems with iCloud on my laptop / PC.  It works fine... Does anyone know what the problem could be?

    Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
    Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
    Franklin

  • I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert apdf file for msword?

    I keep getting the message"an error occurred while trying to access the service".  does anyone know what i need to do to resolve this problem.  I am trying to convert a PDF file for ms word?

    Adobe Reader is free; but you may have paid for the ExportPDF service.
    Contact Adobe Customer Care and click on the Still need help? button to chat with an agent.
    [topic moved to ExportPDF forum]

  • Get could not connect this Iphone to itunes because of unknown error (0xE8000065), but I am trying to connect and Ipod touch.  Anyone know what that error means?

    Get could not connect this Iphone to itunes because of unknow error (0xE8000065) when trying to connect an ipod touch to itunes.  Anyone know what this message means?

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • Does anyone know what this error code means?My itunes will not open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll."

    Does anyone know what this error code means?My itunes will not even open, no matter how many times i downlaod and restore it??? "The procedure entry point xmlITexTextReaderName could not be located in the dynamic link library libxml2.dlll." Please let me know if your know anything! It is greatly apprecitated!

    Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
    Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
    If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
    Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more.  Itunes starts but before anything loads a

  • Does anyone know what is causing this error please?

    I recently ran sfc /scannow. It completed without giving me any notifications other than a number of:
    "Files that are required for Windows to run properly must be copied to the DLL cache."
    I was prompted to insert my XP SP3 installation CD and click on 'retry'.
    The scan lasted for around 40 minutes then closed.......at no stage was I advised that it had been unsuccessful.
    When I restarted my computer directly afterwards, half way through booting a 'please wait' appeared, as if something was taking place.
    I thought all had gone well until I looked in Event Viewer later. There are approximately 90 Windows File Protection entries there mostly with the following information:
    The system file ........ could not be copied into the DLL cache. The specific error code is 0x800b0100 [No signature was present in the subject]. This file is necessary to maintain system stability.
    Does anyone know what causes that error and what I need to do to resolve it please?

    Thank you very much for helping.
    I have already tried to run the Microsoft Fix it from there for XP SP3, the os I have>>>>>>>"This troubleshooter does not apply to your system. We're sorry, but this troubleshooter is not compatible with your current system's configuration."
    That was the only Microsoft information I could find on the specific error code I received: 0x800b0100......although the article applies to Microsoft Updates, I thought it might cover this too.
    I have now run SFC three times, but errors still showed in Event Viewer.
    I regularly run Chkdsk, last few times no errors.
    I am actually having my computer checked for malware right now by specialist malware removers......all the malware scans I regularly run have given me the all clear for some time (McAfee Stinger, Hitman Pro, Malwarebytes - MBAM, TDSSKiller) but there has
    been malware on my computer in the past, which was removed (not serious I was told).
    In two of the scans the techs asked me to carry out there are
    hundreds of dll cache entries under
    Files/Folders - Created Within 30 Days on the date I run SFC.
    I am waiting for this to be confirmed, but it looks to me as if SFC was actually successful to a large extent and the entries in Event Viewer are some failures (not all as I previously thought)?
    I also have a serious problem in relation to Microsoft Updates (please see my other question).

Maybe you are looking for