Error 4280 with OLD sony drive not Sony CD-RW/DVD CRX830E

I run the CD diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Acer TravelMate 630
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: NTIDrvr (1.0.0.4), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 Go \GeForce2 Go
IDE\DiskIC25N030ATCS04-0______________________CA3OA71A, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYCD-RW__CRX820E_____________________1.0a___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY CD-RW CRX820E, Rev 1.0a
Audio CD in drive.
Found 3 songs on CD, playing time 11:54 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:16:00
Track 3, start time 07:39:34
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 1 2 4 8 20.
The drive CDRW speeds are: 1 2 4 8.
As you can see, I do not have a SONYCD-RW_CRX830E but an older version...SONYCD-RW_CRX820E...notice the CRX820E...any help with this issue would be much appreciated. I can not find an answer with my computer company, Acer (i'm not on the thinkpad). PLEASE HELP

I'm not at all sure this will help, but it won't hurt.
First, try resetting the PMU. A PMU reset is a one-size-fits-all first thing to try in most troubleshooting routines.
If that doesn't help, try booting into Safe Mode. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
You will see your normal desktop. Once completely started up in Safe Mode, restart normally, and go to Applications > Utilities > Disk Utility.
Select the named boot volume in the left sidebar ("Macintosh HD" unless you've renamed it). Repair permissions on it.
See if a little hard drive maintenance does anything to help.
Please keep in mind that these are rather last-gasp measures for troubleshooting a non-working optical drive.
Good luck.

Similar Messages

  • Asset Retirement (ABAON) error - Posting with trans.type 210 not possible

    HI All,
    I was trying to sell an asset using transaction ABAON which is fully depreciated, but I am getting the error -
    " Posting with trans.type 210 not possible (No acquisition posted)"
    The Scenario is, there is an asset(car) which was uploaded during implimentation and it got depreciated fully in the month of april.
    The same asset(car, which is fully depreciated) is sold for an amount of Rs 40000/-.
    So, I was trying to post it with some revenue vlaue in transaction ABAON, but I am getting the above error.
    (The Asset value was an uploaded during implimentation,it was not an acquisition value from SAP. It was an uploaded value from legacy data)
    Could any one help in this, or let me know the correct process for this kind of transactions.
    Awaiting for a reply.
    Regards,
    Upendra

    HI Mamta,
    Thanks for the reply.
    While Uploading the data was uploaded as asset balance upload for prior year with value.
    Plase let me know what do you propose, to be done for this.
    Regards,

  • Error posting with trans.type 159 not possible (no aquisition posted)

    Hello All,
    A user has created an PO for asset with GR non valuated  in 2007 and has performed a MIGO/GR in the same year 2007. Now in 2008 the user has received an invoice against the said asset and wants to post it thru Trans MIRO.
    At the time of posting the invoice the user gets the error "posting with trans.type 159 not possible (no aquisition posted)" . Since this is a completely new asset and GR non valuated asset process is a standard in SAP why is the system recognising the transation type as 159 i/o trans type 100 ie new asset aquisition.
    If i post a dummy value to the same asset using FB01 the system accepts the value but the same process if i intend to follow usin MIRO system does not allow.
    Can you guys help me
    Thanks
    Nelson

    Thanks Paul for your reply, I checked the depreciation key. inthe key the "Aqu only allowed in capitalization year is marked as NO"
    Therefore the problem is not the depreciation key
    Thanks
    Nelson

  • Is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

    is there a dvd burner that comes with macs? if not whats a good dvd burner for mac os x?

    This may help, but it's an accessory with an extra cost:
    http://store.apple.com/us/product/MD564ZM/A
    This new Superdrive also supports DVD-Audio so you can load more music into it than a CD.

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

  • SRM MDM, Error, "Table with Code 'null' does not exist in repository"

    Hi experts,
    We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema" 
    Can You please suggest,
    Thanks and Regards,
    Munish

    Hi everyone,
    Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
    We have deployed the SRM-MDM Catalog Search UI in Portal.
    We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
    Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
    Once the Credentials of MDM User is provided, and then selected the "Login" button.
    Then we are getting the below error.
    "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
    Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
    Please guide us, how to fix this Error.
    Thanks and Regards,
    Munish

  • Error : Posting with trans.type 200 not possible (No acquisition posted)

    Dear All,
      Iam getting error while doing asset retirement thru ABAVN. Error is mentioned below. Pls do the needful.
    Posting with trans.type 200 not possible (No acquisition posted)
        Message no. AA324

    Dear Bird,
      Already asset has been posted , but then also it shows the same error.
    pls help on this.
    regards
    Ranjit..

  • MIRO error Posting with trans.type 159 not possible (No acquisition posted)

    Hi,
    I have the following probem while doing MIRO.  Would appreciate if someone could help.
    Error in Purchase invoice posting MIRO  :-
    The user has created a PO for asset in  FY2010 and has performed a MIGO in FY2010.
    Now in FY2011 the user tries to  invoice against the  above asset and wants to post it thru Trans MIRO.
    System gives an  error during MIRO  "Posting with trans.type 159 not possible (No acquisition posted)"  Message no AA 324
    Trans type 159 has trans type group 12 attached to it.
    MIGO can not be reversed  because it belongs to the closed FY.
    Please help

    Hi
    refer notes 1526247 and 1507808... Though it relates to Japan, but the issue is same
    Br, Ajay M

  • Error #1503 with AIR3.4 but not AIR3.2

    I'm working on an Android/iOS app using Adobe AIR. The app appears to work normally both inside Flash Pro and real devices except for the following test:
    Do Publish Preview inside Flash Pro.
    Close the preview window.
    The error appears in the Output panel:
    Error: Error #1503: A script failed to exit after 30 seconds and was terminated.
         at [*code location is a for loop inside writeExternal() of a class saved to a Shared Object*]
    Test Movie terminated.
    This happens with AIR3.4, but not AIR3.2. It doesn't matter how soon I close the preview window. I did a lot of code checking, tracing, etc. but still can't figure out what's wrong. Any suggestions?

    Most obvious suggestion is an infinite loop due to a null variable. Check the condition for the loop to continue and that will give you an idea what is causing it.
    Though, why that would be an issue between SDKs is beyond me without seeing the code. (And possibly even then...)
    G

  • Weblogic 11g JPS-04028 error - Application with name "abc" does not exist

    Hi,
    We are migration one our app from OC4J to weblogic 11g server. This app is running fine in OC4J but getting the below exception in 11g. Pls help us in resolving this in identifying and resolving the same.
    I found info here, but wasn't help full to understand.
    JPS-04028: Application with name "{0}" does not exist.
    Cause: Could not find application with name {0}.
    Action: Verify that an application with the provided name exists.
    Level: 1
    Type: ERROR
    Impact: Configuration
    link - http://docs.oracle.com/cd/E25178_01/core.1111/e10113/chapter_jps_messages.htm
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.az.internal.runtime.service.PDPServiceImpl getApplicationPolicy
    FINE: Not found ApplicationPolicy:abc
    oracle.security.jps.service.policystore.PolicyObjectNotFoundException: Application with name "abc" does not exist.
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.unsync_getApplicationPolicy(XmlPolicyStore.java:640)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.getApplicationPolicyWithNoAuthzCheck(XmlPolicyStore.java:625)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicy(XmlPolicyDistributionService.java:222)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntity(XmlPolicyDistributionService.java:212)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:121)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:116)
    at oracle.security.jps.az.internal.management.pd.service.PolicyDistributionServiceImpl.getAppPolicyEntry(PolicyDistributionServiceImpl.java:137)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:355)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:320)
    at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2719)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:526)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:516)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:516)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:363)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAuthenticatedSubject(JpsAbsSubjectResolver.java:356)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:269)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:212)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPreRegister(JpsJmxInterceptor.java:447)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPreRegister(ContextClassLoaderMBeanInterceptor.java:1
    50)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.BasePublicMBeanInterceptor.internalPreRegister(BasePublicMBeanInterceptor.java:110)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalPreRegister(LoggingMBeanInterceptor.java:633)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.preRegister(OracleStandardEmitterMBean.java:611)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preRegisterInvoke(DefaultMBeanServerInterceptor.java:1010)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:938)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at HTTPClient.config.JRFContextProvider.registerContextRemovalListener(JRFContextProvider.java:142)
    at HTTPClient.config.ConfigurationFactory.registerContextRemovalListener(ConfigurationFactory.java:569)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:133)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:103)
    at HTTPClient.HttpClientConfiguration.getConfiguration(HttpClientConfiguration.java:53)
    at HTTPClient.CookieModule.getMutableStatics(CookieModule.java:769)
    at HTTPClient.CookieModule.addCookie(CookieModule.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)>
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.internal.jaas.JpsAbsSubjectResolver getApplicationRoles
    FINE: oracle.security.jps.ee.jmx.JpsJmxInterceptor:internalPreRegisterJpsException caught during app roles computation: oracle.security.jps.service.policyst
    ore.PolicyObjectNotFoundException: JPS-04028: Application with name "abc" does not exist.>
    -----------------

    Hi,
    This forum is for issues migrating from non-Oracle databases to Oracle.
    It would be better to ask this question in one of the Weblogic servers but as there are several Weblogic forums but it may be better to try this one first -
    Forum: WebLogic Server - Upgrade / Install / Environment / Migration
    WebLogic Server - Upgrade / Install / Environment / Migration
    Regards,
    Mike

  • 11g JPS-04028 error - Application with name "abc" does not exist

    Hi,
    We are migration one our app from 10g OC4J to weblogic 11g server. This app is running fine in 10g OC4J but getting the below exception in 11g. Pls help us in resolving this in identifying and resolving the same.
    I found info here, but wasn't help full to understand.
    JPS-04028: Application with name "{0}" does not exist.
    Cause: Could not find application with name {0}.
    Action: Verify that an application with the provided name exists.
    Level: 1
    Type: ERROR
    Impact: Configuration
    link - http://docs.oracle.com/cd/E25178_01/core.1111/e10113/chapter_jps_messages.htm
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.az.internal.runtime.service.PDPServiceImpl getApplicationPolicy
    FINE: Not found ApplicationPolicy:abc
    oracle.security.jps.service.policystore.PolicyObjectNotFoundException: Application with name "abc" does not exist.
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.unsync_getApplicationPolicy(XmlPolicyStore.java:640)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.getApplicationPolicyWithNoAuthzCheck(XmlPolicyStore.java:625)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicy(XmlPolicyDistributionService.java:222)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntity(XmlPolicyDistributionService.java:212)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:121)
    at oracle.security.jps.az.internal.management.pd.service.XmlPolicyDistributionService.getAppPolicyEntry(XmlPolicyDistributionService.java:116)
    at oracle.security.jps.az.internal.management.pd.service.PolicyDistributionServiceImpl.getAppPolicyEntry(PolicyDistributionServiceImpl.java:137)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:355)
    at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:320)
    at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2719)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:526)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$4.run(JpsAbsSubjectResolver.java:516)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:516)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:363)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAuthenticatedSubject(JpsAbsSubjectResolver.java:356)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:269)
    at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:212)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalPreRegister(JpsJmxInterceptor.java:447)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalPreRegister(ContextClassLoaderMBeanInterceptor.java:1
    50)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.DefaultMBeanInterceptor.internalPreRegister(DefaultMBeanInterceptor.java:81)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.generic.spi.interceptors.BasePublicMBeanInterceptor.internalPreRegister(BasePublicMBeanInterceptor.java:110)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalPreRegister(LoggingMBeanInterceptor.java:633)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doPreRegister(AbstractMBeanInterceptor.java:180)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.preRegister(OracleStandardEmitterMBean.java:611)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.preRegisterInvoke(DefaultMBeanServerInterceptor.java:1010)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:938)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:917)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.registerMBean(JmxMBeanServer.java:482)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:714)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.registerMBean(JMXContextInterceptor.java:445)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$27.run(WLSMBeanServerInterceptorBase.java:712)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.registerMBean(WLSMBeanServerInterceptorBase.java:709)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.registerMBean(WLSMBeanServer.java:462)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor$1.run(PrivilegedMBeanServerInterceptor.java:55)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at oracle.as.jmx.framework.wls.spi.security.PrivilegedMBeanServerInterceptor.registerMBean(PrivilegedMBeanServerInterceptor.java:60)
    at HTTPClient.config.JRFContextProvider.registerContextRemovalListener(JRFContextProvider.java:142)
    at HTTPClient.config.ConfigurationFactory.registerContextRemovalListener(ConfigurationFactory.java:569)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:133)
    at HTTPClient.config.ConfigurationFactory.getConfiguration(ConfigurationFactory.java:103)
    at HTTPClient.HttpClientConfiguration.getConfiguration(HttpClientConfiguration.java:53)
    at HTTPClient.CookieModule.getMutableStatics(CookieModule.java:769)
    at HTTPClient.CookieModule.addCookie(CookieModule.java:515)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3717)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)>
    <May 24, 2012 11:17:11 AM GMT+00:00> <Notice> <StdErr> <BEA-000000> <May 24, 2012 11:17:11 AM oracle.security.jps.internal.jaas.JpsAbsSubjectResolver getApplicationRoles
    FINE: oracle.security.jps.ee.jmx.JpsJmxInterceptor:internalPreRegisterJpsException caught during app roles computation: oracle.security.jps.service.policyst
    ore.PolicyObjectNotFoundException: JPS-04028: Application with name "abc" does not exist.>

    Hi,
    This forum is for issues migrating from non-Oracle databases to Oracle.
    It would be better to ask this question in one of the Weblogic servers but as there are several Weblogic forums but it may be better to try this one first -
    Forum: WebLogic Server - Upgrade / Install / Environment / Migration
    WebLogic Server - Upgrade / Install / Environment / Migration
    Regards,
    Mike

  • New dvd drive-what to do with old cd drive? Leave it in?

    I have a powermac g4 agp that has it's original cd drive installed. It works fine but it can't burn disks just read. I purchased a Pioneer dvr-115D dvd/cd writer drive so I can burn disks too. Can I leave the original drive in and add the dvd-dvdr to the machine? If so, how? It looks as though there is an extra bay under the cd drive.

    Hi-
    In the Sawtooth, it appears easy from the outside, but the internal carrier for the lower bay is only 3.5", instead of the 5.25" needed for the optical drive.
    Although a "do it yourself" carrier can be fashioned, after removing unnecessary sheet metal, a 5.25" drive in the lower bay also interferes with the heatsink of the CPU (and/or other components), unless you leave the side door open.
    It's best to replace the original CD drive, and, if desired, put the old drive into a firewire housing.

  • Log in with old ID is not working

    My game center ID was linked to @me.com  Since that domain does not exist (replaced with icloud)  I can not update my information
    If I try to log in with MY old ID it says "someone already has that ID".  What do I do to link to MY old ID?  Suggestions please
    Thank you

    Welcome to the Apple Community.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)

  • Help. JDBCRealm error -- org.gjt.mm.mysql.Driver not found

    Hi All,
    I tried to setup JDBCRealm. After I config. to JDBCRealm and restart tomcat. I got this error:
    java.sql.SQLException: org.git.mm.mysql.Driver error.
    Can someone help. Thanks

    web-inf/lib is not sufficient in this case, as the Tomcat engine needs access to the driver - not just your application.
    http://jakarta.apache.org/tomcat/tomcat-4.1-doc/realm-howto.html#JDBCRealm
    You need to
    Place a copy of the JDBC driver you will be using inside the $CATALINA_HOME/server/lib directory (if you do not need it visible to web applications) or $CATALINA_HOME/common/lib (if it will be used both by Tomcat 4 and by your apps).
    Cheers.
    evnafets

  • Drive not recognizing Blank Princo DVDs

    I just ordered and received 200 Princo 4x DVD-Rs because I have one of the early G5s with the Sony DVD RW DW-U10A, that is a 4x writer. These Princo blanks seemed to be some of the only 4x DVDs still around. Now when I put them in drive, my G5 doesn't recognize them, they spin around for a couple minutes, then the drive just kicks them out.
    What's weird is, the drive can see and write to 16x Memorex blanks just fine. And when I put the 4x Princos in my girlfriend's MacBook Pro, they are immediately recognized and work just fine. What gives? Ever seen anything like this? It bums me out that I went to the trouble to purchase 4x speed DVDs to avoid complications, and that seems to have completely backfired on me.
    Any advice or thoughts would be appreciated.

    Yeah, thanks for the advice. It has been a finicky drive for me, but in general has given me almost no bad burns over the past 4.5 years, this is the first time it's rejected media.
    Those Princo DVDs though, they are the white tops, they feel really light, and I'm thinking that they're not much in terms of quality...oh well, I had been using Yuden's for the past few years with great results, but when I could no longer get their 4x media, I thought the most important thing (based on some misleading posts I read) was to acquire 4x media.
    Anyway,
    Thanks everyone for the responses.
    B.

Maybe you are looking for

  • Menu button text disappears only on some players

    I built and formatted a project using DVDSP 3.0.2. Menus were created in DVDSP. The main menu and scene selection menus look correct on all software players and most set top players I tested. However, on some set top players, including a Sony I tried

  • Does Oracle 11g 32-bit  can run on Windows Server 2012 (64 bit) ?

    Hello! I´ve bought Oracle 11g Standard Edition One 4 years ago, (Release 1 11.1.0.6.0 ) and installed on a Windows Server 2008 (32-bit) We ara planning migrate out BD to a new server with Windows Server 2012 (64-bits) Can i install and use that Oracl

  • Auditing Oracle Data

    Being on this board I've found what asking questions often more difficult than answering them. Most of people have problem with that and I am one of them. This one is also not easy to raise because it is wide-ranging I am looking for good examples an

  • Issue while printing ' & ' in the text

    Hello,          In a particular transaction there is a text field where the user could enter unlimited text. I have developed a smartform to display the texts. I wud explain the problem with an example. Text :  " On the Insert tab, the galleries incl

  • Reading a book on the computer

    Is there a way for me to (1) read my downloaded book out of Itunes on my computer and (2) print a page out of the book?