Error -43, Quicktime files won't save anymore

hi,
since a few days my quicktime pro 7 version has a broken save files function. Everytime i try to save a file (for example, the trailers of apple.com) it doesn't save them. When i want to quit it asks if i want to save my changes and i try to, but the file does not save. It does not show an error message, except when i try to save files, embeded in an webpage. Then it says, error: -43
can anybody help me out? a few weeks ago there were no problems and i could save everthing
greetings

http://discussions.apple.com/thread.jspa?threadID=769732

Similar Messages

Files won't save in folders

I just purchased Final Cut Studio today. I'm going through the tutorial and my files won't save in the folders created for the tutorial on my HD. I go to "send to" for Motion and Motion opens and asks for a data rate. Then when i choose one Motion opens it's window but there is no project. Any clue?

If you copied the files to your hard drive before working with them, make sure you have permission to both READ and WRITE to all the files involved. Highlight a file and hit Command i (Get Info) to see how the permissions are set. You can change them there if needed.
-DH

CS4 Photoshop - saving on NAS storage - open file won't save without renaming it.

open file won't save without renaming it. If you try to save a file that you have adjusted in CS4 Photoshop on a networked drive, it won't save it. If you rename it, sure. If you are working on the local drive it is not a problem.
By the way, we have 2 users in house. Both on Mac systems and both are using CS4 Creative Suite. One Mac is OSX 10.6.8 - the other is Mac OSX 10.8.3. The older Mac system does not have a problem.
Is this a Mac operating system problem? would upgrading to CS6 solve the issue for our Mac OSX 10.8 ?

Try the forum for Adobe Acrobat.

File won't save - error message is: "...could not be saved. No such file or directory." (?)

File will not save or 'save as' - error message is: "...could not be saved. No such file or directory." File has been save previously. Is this a preference issue or perhaps a permissions issue?

I repeat that everything dedicated to the save process is different.
The app contain two sets of code, one used under 10.6.8, an other one used under Lion.
Here are the two states of the File Menu under Lion.
Compare them to what you get under 10.6.8.
State #1 when the frontmost document was never saved :
The menu item Save is replaced by Save…
No longer Save As… menu item replaced by Duplicate
New item : Revert Document… (disabled)
State #2 : when the frontmost document was saved at least once.
Save… is replaced by Save a Version
Duplicate is always here
Revert Document… is now enabled.
There is an important change in the title bar too.
When a file was edited we get the word Edited on the right of the doc's name. This word is the title of a local menu :
Triggering Browe All Versions give us what I already posted in the thread :
https://discussions.apple.com/message/16523021
Yvan KOENIG (VALLAURIS, France) jeudi 27 octobre 2011 11:49:49
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Adobe Classroom in a book file won't open anymore

I have a Framemaker 7 Classroom in a book file that won't open anymore. I purchased in in 2006
and it's worked for years. There is no error message. I keep getting redirected to Adobe Digital Editions website. So I've installed the Adobe Digital Editions software and still no luck. I spent 2 hours on the phone this morning with Adobe support and their final conclusion is they don't support this issue.
Anyone have any ideas? All my other pdf's open with out any trouble. Some of them are ancient.
Thanks,
June

You may use the forum for Adobe Digital Editions.

Movie won't open in Quicktime and won't save in iTunes

I have just finished editing a project and I am trying to share it to iTunes or Quicktime.
When I share it to "Apple Devices 720", it was automatically saved to the Final Cut Project file folder under "Shared Items", and inside I found the Quicktime file for the project. But it won't open in Quicktime, I am getting an error message that says:
"The document XXXXX (1280 x 720).m4v-TEMP” could not be opened. The movie's file format isn't recognized."
I tried to share it to iTunes, nothing works. I just want to be able to play it.
Ideally, I would like to be able to play the movie in iTunes on my iMac, and be able to sync it to iPod Touch.

Actually, I solved the problem. follow these instrudctions:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.
If you can't find com.apple.finalcutpro.plist delete any com.apple.finalcut..... files.

Frequent "Error. Unkown File." on save

I teach high school video production. We're lucky enough to have three mostly-working Final Cut Express/Final Cut Pro stations. (we have both packages)
On all of them, we often get an error while trying to save that there is an "Unkown File." I check the browser, and we need everything that is in there. Nothing seems "unknown" to me. I check any other open projects and close them. I can't find this mysterious "Unknown" file that is making it impossible to save my student's projects. I had to keep one machine on a whole week hoping the power wouldn't go out. I also have exported work as quicktime files to "save" it.
I really need to find a fix for this. It happens on all my machines and in both Express and Pro.
My background is more in Premier/Media100 and good old-fashioned linear editing. So, some of these issues are new to me. I'll have more questions to post later, but this is the most pressing issue right now!
Thanks!
Seth

Whenever I've gotten an "unknown file" msg it was because the project had become corrupted.
I save multiple versions of the same project (Version 1, Version 2, Version 3 etc) If I get an "unknown file" I go to an earlier version and it usually loads up fine. Something has gone wrong in the later version. The "unknown file" is usually the Project file itself.
What went wrong? Lots of possibilities but I think, for myself, it probably stems from not correctly saving/exiting from the program, like shutting down before the save was completed
I have other people working on my systems occasionally, and although I drill them on proper saving, start ups, exits, back ups, etc, I see them sometimes straying from the path. In a school situation, with lots of students accessing the gear, improper handling issues are commonplace.
I also had that error msg once when I was able to trace it back to a corrupet AIFF file; the thing played properly but for some reason, FCE just hated it. I deleted it, brought in a new version of that audio and all was well. So, altho that AIFF file was in its proper folder, FCE was not able to recognize it

Error -1450: iTunes library won't save

For some reason, my entire library won't save. So i have to keep reloading everything, then exporting. But it's getting really really annoying cause sometimes iTunes doesn't even recognize my iPod anymore. Help?

Also, all my podcasts are gone from its original library place thing... but I have all the files of it. Is there someway to return these video files back to the podcast library and not just some podcast playlist?

Older Quicktime Files won't load into 80GB "Classic" iPod

I have several Quicktime files that are several years old and iTunes will not load them. The error message I get states "Files cannot be played on this iPod".
My Quicktime is up to date. Any Ideas?
Thanks.

I have several Quicktime files that are several years old and iTunes will not load them.
I'm guessing you mean iTunes itself plays the files but will not load - or synch - them onto your iPod.
If that is the case try selecting/highlighting the troublesome videos in your iTunes Library and then going to the iTunes Advanced menu > Create iPod or iPhone Version and let us know if it brings you any combination of joy and/or satisfaction.

Watermark source file won't save in settings

I have successfully created several watermark images that have source files (both in PDF format and JPG format). But there is one that I cannot get to save. I have tried the image in both JPG and PDF formats, but for whatever reason, when I try to save the settings, the source file is not saved and it just comes up as blank text when I select it for use. I have tried over and over again to save this watermark.
As a result, whenever I want to apply this particular watermark, I have to go and browse for and find the file time and time again.
?? Any clue as to why this one won't save? Is there a maximum number of watermarks that can be saved?

You can look at the place where the settings are saved.
For Acrobat 8 and MS Vista the place is:
X:\Users\{user}\AppData\Roaming\Adobe\Acrobat\8.0\Preferences\Watermark

Files won't save to remote in CS4.

I started this website in CS3 and right before my upgrade, the "Save to Remote" stopped saving. I have upgraded to CS4 and still on this one website, I can not "Save to Remote". Nothing changes on the remote end after my save.
Any ideas on what to check out?
I created a new site and started from scratch copying the files from the remote to my new local folder and still it won't save to remote. Not sure what to check but there must be a setting wrong somewhere.
Thanks.

You may want to look at the dates and times for both the files on your computer and those on your server. They should be the same but for some reason the ones on the server are not being updated. After identifying the ones that are "out of sync" then deleted the old ones from your server manually and "put" the ones on your computer. try with one file first.
Hope it helps
Patrick

Quicktime Pro won't save mp4 as mov

I've got several .mp4 files (created by myself with Sony Vegas using h.264 codec) that I'm trying to convert to faststart .mov files for Internet playback. I just picked up QT Pro and as I understand it I should be able to open the file and simply Save As a mov file to get a new non-rerendered h.264 encoded .mov). When I attempt save as, new files never get created. My save window goes away. When I close QT it asks me to save my changes again, still without saving the file.
I also attempted to export from QT Pro using same h.264 (same codec as mp4 was created with). The file that is created is large (obviously re-encoded, something I DON'T want) and I don't see video, just hear audio.
The original files play fine in QT 7.
Any thoughts?
Thanks, Kurtmo
core2 6600 - 7900 GS Graphics Windows XP Pro

Does the vegas create proper .mp4 files or are these
in an .AVI wrapper? Just trying to determine why a
simple "Save As..." wouldn't work.
The file is a regular .mp4 file created using Sony Vegas. The file plays fine in QT 7 players. I put some screen shots of my test mp4 with movie info and the encoding options for export. As you can see, I don't get a "passthru" option, so I don't get to far with the work around.
Here are the two screen shots:
http://jewellhome.net/MovieSettings.jpg
http://jewellhome.net/ExportSettings.jpg
Another thing you can try is to do an export BUT set
the compression settings for the audio and the video
to "Passthru". This will just take what you've got
and wrap it in QuickTime's .mp4 format, then a "Save
As..." to a movie should work.
The other thing I've noticed, I don't see anything in the preview window when I try to select different settings for the export. As I mentioned earlier, exported files end up with a white screen in place of video (and a large file size, go figure).
Any other thoughts?
core2 6600 - 7900 GS Graphics Windows XP Pro

Export Quicktime from Final Cut but that Quicktime file won't play on my PC

So, I filmed a video in HD with my Sony camera at school, edited it using their Final Cut software, and exported it to the default Quicktime file (same one that can be imported into iDVD). I burned that Quicktime file to a data dvd (not DVD-video) and brought it home to my PC. I expected Quicktime to be able to play the file no problem because I have played many QT HD files before, but it will not work.
I downloaded the EVO QuickTime Component and DirectShow Plugin for Windows because I read that was a crucial codec, but that did not change anything.
Please help! I am running Windows XP Pro with all the latest updates, and the latest version of Quicktime. Thanks.

The default format that FCP uses is DV, which many PCs have trouble with. Try exporting with the "Using Quicktime Conversion" button, and select "Quicktime Movie". Or, if all you need to do is watch it (because the quality of AVIs is not great), export to AVI.
I won't say "what are you doing with a PC?!", becuase that would be a silly question (I assume you have a reason).

I get an error message saying it won't save my project

Any help? It just randomly says it can not save my projects. Not a space issue- just won't save any edits. Will let me make edits and render and export- but all changes are lost when I quit.

most likey.Here is the new article apple has on it http://support.apple.com/kb/TS5376

PDF file won't save

Hi guys,
I got the Adobe Acrobat X program and whenever I try to save a PDF file and replace the existing file it would tell me "the file may be read only or another user may have it open".
I've been using adobe for 2 years and it has never showed this error message.
I uninsalled and reinstalled it- Didn't work.
I checked if it's on read only mode- and it's not..
It all of a sudded popped up this year..
And... I don't know what to do anymore!!!
Would love to get some help.
Liran.

Bill@VT wrote:
Windows Explorer has Preview turned on in most cases. You can either close Windows Explorer or turn off the preview feature. Apparently windows is setting a flag with the preview that says the file is open and that is what Acrobat sees (or maybe it is something about Acrobat, don't know). In any case, the preview function usually causes this problem. You should still be able to save it to a new name, but that means an extra step.
Oh I didn't know what you meant by saying Windows Explorer at first, until I googled it and realized it's this window. Shame on me.
So yeah I started using the preview feature, it's really comfortable to use, and when I closed the feature it worked! No problems! ThanksBill@VT!
But is there any setting that I can change so I can leave the preview feature on and not having trouble with the saving thingy?
Liran.

Error -43, Quicktime files won't save anymore

Similar Messages

Maybe you are looking for