Error -43 when copying to an NFS share

Hi!
I am using an NFS share. Whenever I try to copy something to it via Finder, I get an error -43 (some object could not be found). When I do a "cp something /path/to/nfs/share" in the terminal, it works fine though. What does the error mean and how do I get rid of it?
Cheers,
Arne

One more piece of information: When I try to copy something /out of/ the share, I get an error "insufficient rights". However, doing the cp out of the directory in the terminal, it works. So it seems that Finder somehow completely misinterprets the access rights, wheres apps in the terminal, like cp, mkdir, or mv seem to work just fine!
Please help, since this is totally frustrating. I did not find any error messages in the Console either...
Arne

Similar Messages

IOMeter hangs when running to a NFS share from Windows Storage Server 2012

Hello,
I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
Thanks in advance,
BJ

I am trying to measure performance of NFS share coming from Windows Storage Server 2012 using IOMeter also running on windows Server 2012. I can create the share on WSS2012. Windows 2012 client does see the share. IOmeter does see the share, and I can start
running. But fairly quick IOMeter gets an error, and stops. After that NFS share on the client is not visible to IOMeter anymore. This happen every time.
I have used IOMeter to SMB shares a lot with no problem..
1) Can you use NFS share with NFS clients normally? I mean is it I/O Meter who has issues with streaming or do other apps have similar problems? Say normal copy to / from NFS share?
2) What error exactly is popped up? Do you happen to have a screenshot?
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Error message when copying a music file from PC to BB

I get the following error message when copying a music file. Also I cannot delete any files.
"Cannot copy. The request could not be performed because of an I/O device error."

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error message when copying from Acrobat Reader

Error message when copying from Acrobat Reader - any file, any time (Win 7, Adobe many versions until recent).
Copy works, but causes a needless and useless error message that has to be clicked away every time.
This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
When can I expect a solution?

"101 Views 0 Replies
Was this helpful?"
Of course not.
But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
It can be that easy.

Error -36 while copying files to SMB shares but not AFP. (OSX Server APP)

Hello,
So far my transition to OSX server has been a sloppy one. I have had so many problems. I have problems with permissions about everyday. Anyhoos, here is my latest problem. Everytime (from any client computer) a computer tries to copy a file or folder to a share using SMB protocol to the osx server i get this message:
The Finder can’t complete the operation because some data in “File or folder name" can’t be read or written.
(Error code -36)
This does NOT happen when copying the same files using AFP protocol. I using a windows box at work, (dialing in throught the VPN) it doesn't seem to have any problems dropping files either. Anyone know whats up? I have read on the site that others are experiencing problems with SMB within OSX servers. Some report that it stright doesn't work!!!!
Anyhoos, through all my problems, you guys have been VERY helpful to help me work through it. I really appreciate it!!

Just found a slight work around:
http://www.macwindows.com/TIP--Workaround-to-Mavericks-file-sharing-is-to-force- SMB.html
Several readers offered a suggestion for yesterday's report of problems with OS X 10.9 Mavericks accessing some Windows file servers and network attached storage device. Mavericks now defaults to SMB2 file sharing protocol, but a bug seems prevent OS X from using SMB1 or AFP when the server doesn't support the newer SMB2.
A workaround is to force OS X to use the old SMB1 (also known as SMB/CIFS). To do that, instead of mounting the server using the Finder, use the Connect to Server command in the Finder's Go menu. Then type in the following:
cifs://server_address (using the IP address or network name of the server)
Using smb://server_address won't work, as this will use SMB2 to access the device.
Thanks to Mario Cajina and Kevin Lepard for the suggestion.

I get an error message when I try to use share function on IPhoto. I get the triangle icon with an exclamation mark inside of it.

I get an error message when I try to use the share function on iPhoto. When I try to share photos via email a triangle icon with an exclamation mark appears. Why can't I use share function?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
What version of iPhoto? Assuming 09 or later
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

"Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

CentOS | Windows 2008
I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on.
I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following:
C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z:
Network Error - 53
Type 'NET HELPMSG 53' for more information.
(IP and share name have been changed to protect the innocent :-) )
Additional information:
I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled.
I came across a
Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck.
I've confirmed that the share folder on the NFS server is readable/writable by all (777)
I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and
mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck.
As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found".
I'm lost on how to proceed with troubleshooting. Any ideas?

There are usully two aspect that come to mind:
1. Syntax of mount command
2. Mismatch of NFS versions
Third reason is here
http://blogs.technet.com/b/sfu/archive/2011/11/21/getting-network-error-53-network-path-not-found-quot.aspx
Rgds
Milos

Copying files on NFS shares takes forever. Any suggestions?

I have some shares mounted via NFS, using Lion as a client. The mounting used to work flawlessly under Snow Leopard. In Lion, copying files often takes forever - the little spinning ball appears and it may take up to several minutes to complete a copy operation. The problem appears to be unrelated from the Finder - I have noticed the same when using the terminal to copy files.
Are there perhaps some different settings I should use when mounting the NFS shares?

Hi,
You may try this:
Click Start> Control Panel> Internet Options.
Click Security tab.
Click Local Intranet.
Click Sites button.
Click Advanced button.
Enter the IP Address of the other machine or server and click Add.
Click Close.
Also, review this article:
How to bypass the
security warning "Unknown Publisher" with the checkbox "Always Ask Before Opening this File"
Tracy Cai
TechNet Community Support

Error Message when copying music files to Nano

When copying an album to the Nano, I receive and error message with 4 songs left to copy off of the album. Error states: Attempting to copy to the disk "IPOD" failed. The disk could not be read from or written to. With 4 songs left to copy
I have only used approx. 344.8 MB of memory. I tried resetting the Nano and then also deleting album and recopying and the same files back. Nothing seems to work, please help!

If you want to use large files you have to reformat it. It will erase any data that is on the drive, If the drive will be used only with OSX, format it as Mac Extended (HFS+) Journaled with the GUID partition table.
Start Disk Utility (Utilities Folder). Select the drive in the left column (be sure to select the drive, all the way at the left, not the volume indented below it). Select the "Partition" tab. Set "Volume Scheme" to "1 Partition". Click the "Options" button. Select "GUID Partition Table". Click the "OK" button. Enter the volume name and click the "Apply" button.

I keep getting this error message when trying any of the SHARE functions.

I seem to get the following message whenever I select any of the share destinations for my project. I am wanting to upload my finished project to youtube, bit I don't know what this error code meand or how to correct it. Help!
The operation could not be completed because an error occurred when creating frame 867 (error -1).
I am keen you upload this 2 min. film ASAP, but of course I can't due to this error and not knowing how to fix it. This error appears soon after it attempts the share process. All help gladly appreciated. Thanks in advance.

Thanks for your great suggestions. I have tried all that you suggested, but no joy. But what did the trick was actually dropping the format from 1080 to 720. Then doing a master file. Quitting and restarting FCP and flicking the project back to 1080p and sharing it again. Low and behold it worked and not an error message was seen. That is some kind of bug. So I am sorted and can now export the 1080p project in 1080p or whatever. I have no idea what went on, but it is now working. I hope my fluke of a tip helps someone who is at their wits end like I was. LOL Thanks again for your replies.

Run-time Error '429' when copying queries from one userid to a new userid

Hello,
One of the users is having an issue when copying queries from an old user id to a new user id.
She is getting the visual basic run-time error '429' - active x component can't create object while copying.
This is not consistent. From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
Please let me know either way. I have found minimal posts on this issue. Most that I have found are outside the sdn forum and talk about registry issues?
Thank you,
Lynda

According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
function onClick()event:MouseEvent):void{

Error message when copying

Every time I try to copy text from a pdf document, I get the same error message "Cannot copy to clipboard. Internal error". Any ideas? I got the same message in Version 10, but re-installed and had no problem. Upgraded to XI and now it is back again. Must I downgrade again to be able to copy?

Hello lcoyote and welcome to the BlackBerry Support Community Forums.
Do you get the error on all media files or just one in particular? From where are you trying to delete files?
Is your media card formatted?
If you aren't able to add/remove media, try formatting the card as shown in KB10527
If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
Let me know how you make out
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Error message when copying a service contract

Hi Experts,
I'm copying the service contract using TRX CRMD_ORDER. When I save the new contract, a message is displayed "Administration header could not be found 47EABD1F5ADC5B38E1000000C8B91C2F" .
We are using CRM 5.0 SP 09.
Can you help me to understand why this message happens?
Best regards,
Caíque Escaler
Edited by: Caíque Escaler on Mar 27, 2008 3:18 PM

Hi Arun,
I wouldn't recommend to deactivate the order_save badi - this may impact the replication process to ECC. This is not what I mentioned. I asked you to check your badi implementations, maybe you are trying to read some GUID that doesn't exist and this is probably a custom code issue.
Please check the Z implementations.
I would also check where the message error is being raised and check the stack. You may find a Z in the middle of stack.
Let me know if you have any comments.
Regards,
Caíque

Error message when copy music form computer to iPod.

I'm receiving an error message on my iPod Classic when downloading music from my windows xp computer to my which reads "attempt to copy to the disk failed. An unknown error occurred (-69). Any ideas on how to fix? thanks

+"attempt to copy to the disk failed. An unknown error occurred (-69). Any ideas on how to fix?+
The following document is worth a try with that one:
iTunes displays a -69 error when syncing iPod

Copy error -36 when copying from Time Machine disk to Mac

Since using OS X 10.6.(.6), I can't copy certain files from my Time Machine disk to the Mactintosh hard disk without getting a copy error -36. The error doesn't occur with all files: for example pdf files will copy without problems, but Filemaker Pro files and iCal files don't. May be it's important to mention that when I retrieve files from the Time Machine disk, I have to mount the "sparse bundle" with my user files first and then drag the files to the desktop or an other place. This is because I'm running File Vault. If I try to retrieve files that were backed up under OS X 10.5, I get no copying errors at all. So it looks as if Snow Leopard has something to do with it. Is there anybody who has seen this problem before and knows how to solve it?

Ok, I finally was able to complete the Disk Utility Repair, and it says everything is ok. Still the problem in restoring presists.
One thing I noticed is that most files that Time Machine restore chokes on have an added set of permissions added to the file or folder with the same user name as mine, and the permissions level says "Custom". Thus it has 2 sets of permissions defined with the same user name, one with Read/Write and another with the same name that says "Custom." Am I explaining this well? Maybe this is a clue?

Error -43 when copying to an NFS share

Similar Messages

Maybe you are looking for