Error 43 when open quick time movie

i have a stranged situation, when i put some movie's on the root of some hard drive (like c or d) its run without any problem. also when i put those movie into some folder that is name is in english (like c:\quicks movie) its run smoothly ..but.. when i try to put those same movie's in some sub folder that have some hebrew charachters in the path its get me some pop up error that said: : "Error -43: a file could not be found" why is come to that? i willy want to keep my hebrew name and not convert all that folder's to english one's, ( i have a lot of them), i try it on couple of pc with same error's,, my version of quick time is 7.3 with recent update,, thanks a lot

Jenny, the solution for me was to save to the desktop. I can export when I save there.
Sharon

Similar Messages

  • Cannot open Quick Time movies in iLife 11

    I got my first digitized Super8 films back on an external hard drive, 1 TB. They were converted to Quick Time movies 1280x720,
    Codecs: Component Y' CbCr 10bit 4:2:2 ( I have no idea what this all means). All I had asked was to get them in .mov files. Quick Time movies seems to be something different than .mov files.
    What can I do to open these Quick Time movies and to edit them in iLife 11?
    Would appreciate if somebody could help me .

    The information about the codec in Final Cut Express is at http://support.apple.com/kb/HT3523
    I have a lot of old Super8 films and decided to get them digitized. After that I intend to discard the old analog films and keep two copies of these old Super8 movies on external hard drives. Therefore I am looking for the best possible quality at a reasonable price.
    The first batch last year was digitized to what they called uncompressed .mov files and could be easily imported and edited in imovie.
    For the second batch (another service) I decided to go HD in .mov files, again uncompressed (the HD quality 1280x720 seems to be remarkably better) What I got are these Quick Time movies that I cannot open in Quick Time and imovie does not let me import these Quick Time movies, whereas the uncompressed .mov files last year were a breeze to handle. What's the difference between 'uncompressed' .mov files vs. Quick Time 'uncompressed' that I cannot open in imovie.
    Now you are pointing out that FCE does not let me edit uncompressed QT files. How do I convert to .mov or MPEG Streamclip?
    Would I purchase Final Cut Express only to be able to open those movies in Quick Time?
    Feels like I am at the low end of the learning curve.
    Appreciate all help I can get for my project.

  • Unable to play Quick Time movies in web pages

    We have Quick Time 7.0.4 player installed on Mac OS X v10.4, But we are unable to open Quick time movies in web browser from external web sites.
    It gives us error ‘To view this movie, you will need QuickTime 5 (or later)’
    If we open Quick time movies from local disk in web browser then it works perfectly alright.
    Could you please let us know the reason behind this?
    Note: I have encounter this problem on safari and IE 5.2 browser.

    For instance if you go to this page again in Safari,
    http://www.apple.com/quicktime/qtv/mwsf06/
    and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
    You will find this, which shows the url of the movie itself.
    <param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
    If you copy just this part:
    http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
    And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
    If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

  • I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    I just updated tosystem10.6.8. I am running Iphoto 08 version 7.1.5 Quick time movies will not open and play directly in Iphoto. When I move them to my desktop they play fine.Quick time 10.0 What do I need to do?

    You need to download and install QuickTime Player 7 for Mac OS X v10.6.3 or later
    OT

  • I have used still photos to make a Quick Time movie using FCE.  The DVD made using i-DVD looks somewhat grainy and the motion isn't smooth when played on my TV.  Other DVD's I have made play much better and I am wondering if the problem is my Quick Time m

    I have used still photos to make a Quick Time movie using FCE.  The DVD made using i-DVD looks somewhat grainy and the motion isn’t smooth when played on my TV.  Other DVD’s I have made play much better and I am wondering if the problem is my Quick Time movie settings.  The Dimensions and size of the problem movie are 1920X1080 and 584 MB respectively, while the movies that play better  have Dimensions of 853X480 and are about 1.3 GB in size.  Is this the source of my problem and how do I change things for the better. 

    Are you exporting to QuickTime Movie, or to QuickTime Conversion?   For iDVD, you need to export to QuickTime Movie.   Exporting to QT Conversion will kill the quality if you are moving the video from FCE to iDVD.
    The file size per se makes no difference.
    What size (pixel dimensions) are the photos that you put into your 1920x1080 sequence?  Also, exactly what are the sequence properties ... is it 1920x1080i60 ... or i50?  In North America it should be i60.
    853X480 is an odd frame size.  Where are you seeing this number?  It would appear to be DV-NTSC, which has a frame size of 720x480.  Your 1920x1080 frame size would not be DV-NTSC, it would be Apple Intermediate Codec.   DV and AIC will look different, for sure.
    Also, your quality setting in iDVD can affect the final video.  You may want to check that also (in iDVD Preferences > Projects).  Set it to Professional Quality if at all possible.

  • I'm getting artifacts and noise when I converted a dv file to a dv quick time movie . HELP

    I am trying to create a dv quick time movie with a resolution of 576x 256, 16 bit from a avi file that is 720x480 millions of color . When I have done this in after effects and made a dv quick time movie it is very noisy (both image and background). I am stymied. Tried to use thenoise effects- and blurring effects to no satisfaction. ANyone out there have any suggestions???? I need immediate help

    which codec are you suggesting
    If Stan's right and that has been asked for by the client, use that.  If not, I like both the Lagarith codec and the UT codec.  Both are lossless and will preserve maximum quality.
    are you talking about doing this in AF or Premiere Pro
    Either way works.

  • When I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    when I import a Quick Time movie into the timeline using Final Cut Express, why does it need rendering?

    Because your clip properties do not match your sequence settings.
    It will help a lot if you provide details ...
    FCE Easy Setup
    Sequence settings (vid rate, frame size, compressor)
    Source of your clips (camcorder make/model, etc)
    Clip properties (vid rate, frame size, compressor)

  • Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

    Hi
    Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
    Thanks
    Colin65

    Steve,
    Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
    Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
    Also please find details of storage devise,
    Dogcam Portable Media Center PMC-500r
    Quick DetailsModel Number:PMC-500R
    SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
    PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

  • Quick time movies in iPhoto

    I have a Panasonic digital camera DMC FX9. When I download stills and short movies from a SD memory card they automatically go into iPhoto. That presents a couple of problems on the quick time movies (.mov). One I don't want them in iPhoto, two if I rename them in iPhoto the new name does not show up in a "smart folder" on my desktop that contains only .mov files.
    How can I make SD card downloads separate .mov files from iPhoto pictures? Would like the .mov's to got to the default MOVIE sidebar folder.
    If not possible, then how can I make the names in iPhoto show up on a folder of just quicktime movies (they keep the original file name despite the new name in iPhoto)?
    Ed
    iMac G5 17" ALS with 1 Gigglebyte ram Mac OS X (10.4.4) Also a homebuilt Sempron, a Compaq, and a Dell laptop...oh my!
    iMac G5 17" ALS with 1 Gigglebyte ram   Mac OS X (10.4.4)   Also a homebuilt Sempron, a Compaq, and a Dell laptop...oh my!

    Hi Edward,
    When iPhoto 5 first came out I really think it was programmed to import the smaller 30 sec video clips that cameras were taking at the time. Since then, digital cameras, at least my Canon S2 can take clips as large as your memory card can hold. The first time I tried to download my images and movie clips with my new camera, iPhoto stalled at the movie clips. I wasn't going to take any chances messing up my iPhoto Library so I started using Image Capture to download all my images and Movie clips. I actually like doing it this way a lot better. My movie clips are downloaded into my Movies folder where I then put them in a dated folder.
    My photos are downloaded into my Pictures folder, where I then put them in a dated folder. I import the dated folder into iPhoto. I also keep all dated folders from photo downloads in the Pictures folder till I get enough Movie folders and Photo folders to fill a DVD. I burn them and then delete them from the hard drive.
    This way I have the photos in iPhoto and I also have just the photos backed up to DVD.
    The Movies I keep on the hard drive in their dated folders until I use all the clips for my iMovie projects for the Year. I then make sure they are all burned to DVD, then I delete those from my hard drive.
    Using Image Capture to download images and video clips:
    Open up Image Capture which is found in the Applications folder.
    When it is opened, go to Image Capture/Preferences
    Under the General button choose
    Camera: When a camera is connected, open Image Capture.
    The next time you connect your camera Image Capture will open.
    In the window that opens you will see an Options button. Click on that button to set your options.
    To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
    iPhoto: How to Change the "Open Automatically" Preference
    If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.

  • Keynote fails to play quick time movies

    HI,
    I am trying to play a quicktime movie which I added to one of the slides. It starts out fine then the screen goes white but the control at the bottom of the screen shows that the movie is still playing. Some times you get the same white slide when you try to stop a movie while it is playing and drag the cursor back to replay a part of the movie again. Other quicktime movies do fine. And this quick time movie plays fine in quicktime. The white slide you get when you are trying to replay a section of quicktime movies can be fixed by going back one slide and and coming back to the movie slide and playing it again. If some one has a fix please let me know. I have seen this happen with other people using quicktime in keynote too.

    For instance if you go to this page again in Safari,
    http://www.apple.com/quicktime/qtv/mwsf06/
    and then select "View Source" from the View menu, then press command-f to "find" within the page and search for ".mov"
    You will find this, which shows the url of the movie itself.
    <param name="href" value="http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov">
    If you copy just this part:
    http://stream.qtv.apple.com/events/jan/mw2006/mmw_2006_650ref.mov
    And open QuickTime Player, go to the File menu, select "Open URL" the movie will play.
    If you try the same technique on the page at the link provided by your client, it will allow you to bypass the html code that may be doing an outdated compatibility check and the movie may play. Or it may tell you that you are missing components (codecs, compressors etc.) in which case, post here again.

  • Can't Open Quick Time

    Every time I attempt to open Quick Time I get a message that states it cannot find File Pthreadvc2.dll It suggests reinstalling the software. I have attempted that several time with no success. Does anyone know how to solve this?

    So I downloaded an h264.mov. and when I click on it topen it it tells me
    QuickTime Player can't open "Room Serviced_H.264.mov".  I click to tell me more and it takes me to an Apple page that tells me this below. But it doesn't give me a solution.
    Media formats supported by QuickTime Player
    QuickTime Player supports the following media file formats and codecs.

  • Importing quick time movie issues

    Should be simple - but: I am putting together a video presentation using photos on iPhoto, converted to a slideshow and exported as a quicktime movie (.mov)
    So far so good
    Then I need to import to iMovie to do additional editing. I have done this before, no issues.
    However, when I try to import, the .mov file is not available. It shows in finder, I can access and play via finder etc, but from the drop menue on iMovie it is not accessible -
    what's up?!?!?

    this is really confounding me, it should be so simple
    First I tried simply exporting the iPhoto slideshow and kept getting
    The operation couldn’t be completed. (OSStatus error -9459.)
    Then used the drop down menu to export to quick time and have a successful export, showing in finder and playable, but cannot import it to iMovie for further work.
    Then, tried removing any music and text and tried to re-export as quick time movie, and got
    "free up disk space" when there is plenty of disk space available.
    Then tried to export as mpeg4 and got
    The operation couldn’t be completed. (OSStatus error -9459.)
    again,
    ?!?!?!?!?

  • Using Quick Time movies with Logic

    Hello all,
    I am writing some music to a quick time movie and everything is working fine...then I scroll back and forth a little to fast....and then the movie starts to skip.
    Problem is I can't get Logic to "Clear" itself, even if I restart or import a different movie, then come back to this movie, it still skips, any ideas...
    Scott

    Scott,
    You're correct, the semi-colon is used to designate drop frame. I've seen way too many timecode burns that didn't match the actual frame rate, even when the footage was provided by supposedly professional editors. The only way to check it is to run it alongside Logic's timecode counter and see how well they jibe at different points in the movie, and based on your last post, you have the correct frame rate and burn.
    As far as skipping, I don't think it has anything to do with how fast you scroll. Sounds to me like your hard drive is having trouble keeping up with the data stream. Is your movie located on its own drive, or is it on your system or audio drives? Best scenario is to have the movie streaming off of a dedicated drive.
    There are two other scenarios almost guaranteed to cause skipping:
    1. You have that movie open in QT while you're also trying to display it in Logic.
    2. You have two or more songs open in Logic that reference the same movie. This is a sure-fire way to encounter skipping.

  • Exporting movie in final cut express to quick time movie

    Does anyone know what ERROR : Not enough disk space means when trying to
    export my movie to quick time movie?

    It means exactly what it says.
    Look in Finder, at the bottom of the window to see how much free space the drive you are trying to save to, has.
    What Sequence setting are you using and how long is your project?

  • I cannot open Quick Time Player at all

    I am simply trying to open Quick Time Player to record a self video. I go to my Applications folder, click on Quick Time Player. It loads into the dock, I double click on the QTP icon, nothing happens. I right click on the QTP icon and get a mini menu of options that don't seem to apply to opening the program to include nothing in the Options (and there is not a selection of "SHOW" only Show All Windows which merely lists four movies I have on my hard drive. Any suggestions from anyone?  Keep it real simple please and assume nothing. I'm of the slide rule era, well before the 8086 days and grew up on the PC.  Thanks.

    Double-click the QuickTime Player and choose New Movie Recording from the File menu. The QuickTime Player will only have a window open when instructed to do so; the items in the menu bar will change when it's launched.
    (115574)

Maybe you are looking for