Error 43 when trying to access smb network mount

I have on a couple of laptops this problem where when I try and connect to a network share using smb I get my authentication window as normal, but it fails to mount with an eero of -43. I have deleted my keychain entries for the network share and have repaired permissions etc. Both laptops are running 10.4.7 and I can connect to the share on an xp machine no problem.
Anyone have any ideas?

-43 fnfErr File not found; Folder not found; Edition container not found; Target not found.
My 1st guess would be bad/corrupt Links/Aliases, my second a bad .plist, but... it sorta implies "lookup" problems in your context.

Similar Messages

  • Error Message when trying to access My Network thr...

    I'm getting the following message when I try to access My Network  or PC Health Check via the BT Desktop Help screens.
    Unexpected error
    BT Desktop Help encountered a technical issue trying to diagnose the problem on your computer.
    We advise you to restart BT Desktop Help and try again. If restarting BT Desktop Help doesn't resolve this issue then we recommend you restarting your computer.
    Any suggestions how to gain access or resolve this problem ?

    I've just had the same problem after updating today. I've tried the usual uninstall; reboot and clean installation and it still falls over when doing any kind of job with it e.g. PC Health Check. Looking at the dates in this thread and those about the same issue in previous threads, I think BT have only just releaed this update. I guess BT and hasn’t properly tested it. I shall uninstall it and consider a fresh install in a few weeks when perhaps they may have got it sorted out. A bit ironical since this new release was partly intended as a bug fix in itself!

  • Just recently I am getting the following error message when trying to access web sites. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. It is an issue with some plug-in?

    Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed in browser winder. Then I have to click ok. It doesn't matter what web link/site I go to it happens. It is an issue with some plug-in?

    I have advised McAfee's product team of the problem and this thread, and they're looking into it now.

  • An error occurred when trying to access the service

    I'm asking myself why I purchased a one year subscription to Adobe Reader to convert PDF files to Doc files, when it NEVER WORKS and no one seems to be able to help me!!! I am on a Mac Book Pro with Yosemite (don't upgrade it slows your Mac badly) and whenever I try to convert a pdf to a doc I get 'an error occurred when trying to access the service', can anybody help me please?

    Hi Cedric,
    The customer service number is 800833687
    The direct link for chat support is: http://adobe.ly/19llvMN
    You need to click on 'Still need help' to initiate the chat session.
    Are you getting this error: "an error occurred when trying to access the service" while trying to access the service via Reader.
    Try using the link: https://cloud.acrobat.com/exportpdf sign in with your Adobe ID and try to convert a pdf to doc and check if that works for you.
    Reards,
    Rave

  • Getting error (-1202) when trying to access my wishlist

      getting error (-1202) when trying to access my wishlist   

    this may help from another thread
    byzon2
    This solved my questionRe: iTunes Error (-1202)
    Dec 28, 2012 6:35 PM (in response to crossi85)
    I am having the same issue on my iMac.  It occurred after the last iTunes update.  Apple support offered no real solution.  They tried "clearing" my Wish List, but that didn't work, and advised me to re-install iTunes.  However, I tried clicking the "My Wish List" link on the right side of the iTunes Home page, instead of the one I usually use under the "Manage" column near the bottom of the screen - and it worked!  Furthermore, my Wish List was still intact even though they had supposedly cleared it.  So, in my case, the problem appears to be the iTunes site, and not my computer.  My solution: Try accessing the Wish List from a different link within iTunes.

  • When I click Convert to Word docx, I receive the error message -- "An error occured when trying to access the service." This has been happening for about a week.

    Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?

    Hi,
    It seems it was working fine earlier.
    Is this happening with all files?
    You can try using different browser.
    Regards,
    Florence

  • Error -1020 When Trying to Access iTunes Store - Help!

    I keep getting Error -1020 when trying to access the iTunes store. Just started happening this morning.
    Nothing online from customer support listed for this error.
    Thanks!

    Looks like it's busted. Same problem here. The way all the support mechanisms work, you can't even report the problem, since you can't really log in to the store.

  • TS3297 How is the following error corrected when trying to access the Itunes store - an unkown error occurred There was an error in the Itunes store. Please try later Ox80092013

    How can the following error incurred when trying to access the Itunes Store be corrected:  an unknown error occurred  There was an error in the store. Please try later 0x80092013

    Try here  >  http://support.apple.com/kb/TS3221
    And/or... see the  More Like This  section on the right.

  • What can I do to fix an old Power Mac G4 that gives an I/O error message when trying to access Entourage?

    What can I do to fix an ld Power Mac G4 that gives an I/O error message when trying to access Entourage?

    You mean when you try to just start it?
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • User gets an Content Encoding Error message when trying to access workspace

    Hi.
    I've created a workspace and added several users to it who can access it without any issues.
    However, one specific user (Leslie Elstad - https://beehiveonline.oracle.com/teamcollab/profiles/[email protected]) can't access her workspaces. She is using Firefox on a Solaris 10 machine.
    Here is what she told me:
    "I clicked on the Start button under Team Workspaces, which took me here:
    https://beehiveonline.oracle.com/teamcollab/
    and displayed the familiar Content Encoding Error message."
    Please advise.

    Hi.
    Please let me know what is going on when we add people to a Beehive Online group (Solaris Curriculum).
    People are frequently getting this same error/message when trying to access several workspaces.
    New cases, please help me fix their access:
    [email protected] can't access https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    [email protected]: can't access: https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    Thanks.

  • TS1424 Why am I getting error 11222 when trying to access the store?

    Why am I getting error 11222 when trying to access the store?

    The 11222s can sometimes be associated with LSP issues.
    I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I am unable to covert a pdf to word. I get;"A error occured when trying to access the service

    I am unable to convert a pdf to a word doc.   I get, "An error occured when trying to access the service"

    This is the Reader forum, and your question seems to be related with ExportPDF. If it does, you should ask here:
    http://forums.adobe.com/community/exportpdf

  • Error 0x800704b3 when trying to map a network drive

    Hi there,
    I have the following error when trying to map a network drive in my home network:
    "\\iomegahmd can not be reached" and the error code is 0x800704b3.
    I already looked into the services, and my strong assumption is that the problem is that the service "TCP/IP NetBIOS Helper" is not statrted and it is disabled. When I try to start it, there is an error message:
    "The system could not find the path specified".
    I've also checked the dependency components of the service "TCP/IP NetBIOS Helper":
    Ancillary Function Driver for Winsock
    NetBT
    TCP/IP-Protocol driver
    NetIO-Legacy-TDI Support driver
    in the device manager if they are running, but they are all running. The start is set to "System".
    Under the TCP/IP Internet version 4 properties of the wireless device, under Advanced -> WINS Ive set Enable NetBIOS over TCP/IP, but it didnt help either.
    What else could I try, so that I can map network drives?
    I should also mention, that the problem persist since some week ago. Before it, it was properly functioning. Also, on the other computers in my networks I do not have problem accessing the same network drive.
    Thanks in advance,
    Dime

    > I should also mention, that the problem persist since some week ago. Before it, it was properly functioning.
    Its difficult to say whats wrong in your case. My first idea is: set the system to early time point before this error appeared.
    I would also recommend to disable all the security software and check if you come across the same problem.
    If you still face the issue, then follow the link to fix the corrupted user profile.
    http://windows.microsoft.com/en-US/Windows7/Fix-a-corrupted-user-profile

  • Fix for "Not Connected" Error Messages When Trying to Access Web Services

    If you run across an error message on your printer stating that it is "Not Connected" when trying to access ePrint or your Apps, but you know it is connected to the internet, it probably just means that the printer is not connecting to the server properly.
    Here is the first set of steps I would try, since they seem to resolve this issue half of the time.
    The first thing I would try in this situation is a network reboot.
    First, disconnect the power cord from the back of your router. 
    Next disconnect the power cord from either the back of the printer or the wall, without powering it off first. 
    Wait about 30 seconds and reconnect the power cord to your router.
    Wait about another 30 seconds and plug the printer back in. It should boot back up automatically, but if it doesn't go ahead and press the power button.
    Once everything is back up and running, try to access ePrint or your Apps.
    If those steps don't work for you, the next thing would be setting a Static IP & DNS for the printer. Before doing this, you want to print off a network configuration page. It varies from model to model, but it is usually found under the Wireless Settings or under Reports in the Setup menu. After you have that page, follow these steps.
    Before we start, we need a network configuration page with your current connection settings. To get this, press the wireless button on the front of your printer and then press "Print Info" or "Print Report". This will print off a network configuration page, which has information on it that we need to complete the next few steps.
    After you have that, we will need to access the printers Embedded Web Server (EWS). You can do so by entering the printers IP address (from the network configuration page) into your browsers address bar and pressing enter.
    Once there, press the "Network" tab at the top of the page. From there you will want to click the "IPv4" button, located on the lef-hand side of the page. It will be there for WIreless and Wired, so make sure to click the one for you however you are connected. If you do not see "IPv4", you should see "Networking", press that and then press "Network Address(IP)".
    Next, you will want to click the small round button next to "Manual IP Address" and then fill in the boxes for IP Address, Subnet Mask, and Default Gateway, using the information found on the network configuration page.  
    For the Primary or Preffered DNS Server, you will want to enter 8.8.8.8.
    For the Secondary or Alternate DNS Server, you will want to enter 8.8.4.4.
    Click apply and when the message pops up saying that the changes have been applied, press "OK". 
    Press the power button on your printer, wait for it to fully power off and then press it again to power it back on.
    After doing this, go ahead and try to enable ePrint again.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    This question was solved.
    View Solution.

    The reason we recommend using 8.8.8.8 and 8.8.4.4 for the DNS server is because they work when ISP assigned DNS servers do not. The DNS server assigned to you by your ISP is not able to resolve the domain for web services, therefore not allowing the printer to connect. 
    I assure you that it is with your ISP's DNS server and not the printer. If you were to take the printer back to the store and get a replacement, you would have the same issue, unless you changed the DNS. Same goes for any of our web service enabled printers. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Getting error message when trying to access video on my iPad

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

    Hi this is my first time on this site so bear with me if I do the wrong thing.
    Here goes  I have read through some of the answers to the question but mostly they seem to related to YouTube.  My question relates to my iPad.  I get an error message when trying to view a video which I synced from my macbook pro.  The message reads "You do not have permission to access the requested resource"  The question is how do I get permission. Has anyone got an answer would be much appreciated.

Maybe you are looking for