Error 4300 Stops burn process

stops burn process in first song, ruins CD for use. Displays error 4300

What does the error 4300 mean--I cannot burn disc....have reloaded i tunes and all! HELP!!!!!!!!

Similar Messages

  • "Errors Found During Burning Process"

    Hi,
    Having sucessfully burned AVI movies using iDVD in the past I have started getting errors. iDVD now does the same thing regardless of the movie i'm trying to burn and the media I use.
    Having selected Best Quality (due to the film size), the menu rendering works fine, as does the prolonged job of encoding the video. When iDVD gets to the Audi encoding bit, just before it starts to burn the DVD itself, iDVD ejects the disc and states: Errors Found During Burning Process.
    Clicking on the arrow to get more info it states: "The recording device reported the hardware error: Tracking servo failure. (0x09, 0x01.)" Bizarrely, the main iDVD progress window states both 'Cleaning Up' and 'Writing Lead-In' and the only way to get out if it is to force quit.
    I've read a few posts on here and tried a couple of things such as trashing the plist file and reparing permissions. I also booted up the diagnostic disc to see if it could see a problem with the optical drive. But nothing has solved the problem.
    Any ideas?
    For reference, I'm running iDVD 5.0.1 on Tiger on a 1.8 G5 iMac with 1GB RAM.
    Appreciate any help you can give me.
    Neil

    Colleagues:
    Ran into the same error, # -34506. Definitely frustrating as I was burning a DVD of an iMovie that I'd spent many hours editing. The iMovie is only 30 miniutes in length, so I don't think it's a size issue. iDVD went through each one of it's steps in burn DVD sequence. However, 45 minutes later when processing is finished, the message reads: "Burning Finished, Errors were found during the burning process." Clicked to see the detail: "The error # -34506 was reported." Checked the DVD and nothing was burned!!! The same thing happens when I opt for disk image. No img file is produced. This is especially frustrating as it looks like it all but completed processing.
    Does anyone know what Error # -34506 specifically indicates? How do you fix this? Does it only happen in a specific sequence? And, is Apple aware of the problem?
    Thanks!

  • Error found during burning process

    I am having a problem burning my iDVD project to disk. I'm using DVD-R disks. The message I get is "Errors found during burning process". The burning process seems to work correctly all the way through until it gets to the last step - "burning".

    There are lots of things that can cause problems burning to disk.
    I suggest that you save your project as a disk image (an option on the iDVD file menu) and see if that is successful. If it is successful, that would eliminate issues related to iDVD, encoding, and source material. After that, I would look to what brand of DVD you are using (Verbatim, Sony, Fuji, and Hp are oft recommended here), what burn speed (4x or lower is best), whether all iLife programs are up to date, whether you have any 3rd party or Quicktime plug-ins that might be interfering, whether you have sufficient hard disk space to burn (20 Gb is recommended, although 5GB would be absolute minimum).

  • I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

    Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before.  I've checked the mapping for errors and found none.  When I attempt to burn a DVD, the error mentioned above appears after a few minutes.  I've tried to update all software, restart the computer, and use other DVRs.  Any adivice would be most helpful.  Thanks in advance!

    Hi
    To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
    First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
    If problem persists in encoding part then
    • iDVD got a corrupted pref file - very common problem
    • Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
    • Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
    iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
    Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
    Material - Here You need to supply specific information
    • Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
    • Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
    Yours just trying and Guessing Bengt W

  • Unknown Error 4300, cannot burn disk in iTunes

    Good morning,
    I am having the problem of not being able to burn a disc in iTunes. I am getting the message of unknown error (4300). It acts like it's burning then I get that message.
    I have did set the properties in my computer to burn audio disk and also unchecked includ cd text in iTunes in the burn options as suggested on another thread.
    Any other suggestions?
    TIA,
    Blondie

    Hey there,
    I am also having the same problem. I recently upgraded my system from an AMD Athlon 64 X2 Dual-Core 3800+ and Asus A8N-E motherboard to an Intel Core-Duo E8400 and Asus P5Q motherboard. The DVD drive, an LG GSA 4167b, is the same. iTunes itself runs much smoother now, but for some reason will not burn CDs (unknown error 4300). This is curious, as I have burned many CDs with this drive using iTunes on my old system. I have tried uninstalling and reinstalling as well as removing and old version (4) of a Nero Suite I had kicking around. I cannot seem to find a list of iTunes error codes anywhere and there does not seem to be any real answers to this error code. Yes, the drive is plugged in properly (sATA)
    thanks very much!
    Wetmatt

  • System launchd agent error starting/stopping system processes

    I installed PHP 5.4 via brew package manager. I kept the system Apache & configured it to work with this version of PHP rather than the system copy. I used launchctl (sudo launchctl load -w /System/Library/LaunchDaemons/org.apache.httpd.plist) to load apache automatically on boot. I created a Sites folder for Mountain Lion and opened http://localhost/index.php and got the standard PHP 5.4 system config page showing that everything is working fine. I checked my system logs just to be sure nothing was out of the ordinary and I am seeing these errors in my log even though everything seems to be fine and I am not seeing system crashes, slow runtimes, etc:
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd[3055]) Exited with code: 1
    9/5/12 2:38:51.292 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named[3056]) Exited with code: 1
    9/5/12 2:38:56.686 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd[3057]) Exited with code: 1
    9/5/12 2:39:01.328 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named[3058]) Exited with code: 1
    9/5/12 2:39:06.700 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd[3060]) Exited with code: 1
    9/5/12 2:39:11.359 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named[3061]) Exited with code: 1
    9/5/12 2:39:16.715 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:17.060 PM named[3171]: starting BIND 9.8.1-P1 -f
    9/5/12 2:43:17.060 PM named[3171]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
    9/5/12 2:43:17.064 PM named[3171]: /private/etc/named.conf:4: open: /etc/rndc.key: file not found
    9/5/12 2:43:17.064 PM named[3171]: loading configuration: file not found
    9/5/12 2:43:17.064 PM named[3171]: exiting (due to fatal error)
    9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named[3171]) Exited with code: 1
    9/5/12 2:43:17.065 PM com.apple.launchd[1]: (org.isc.named) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd[3173]) Exited with code: 1
    9/5/12 2:43:22.164 PM com.apple.launchd[1]: (org.freeradius.radiusd) Throttling respawn: Will start in 10 seconds
    9/5/12 2:43:27.075 PM named[3174]: starting BIND 9.8.1-P1 -f
    Process:         SleepServicesD [48]
    Path:            /System/Library/CoreServices/SleepServicesD
    Identifier:      SleepServicesD
    Version:         1.43
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [1]
    User ID:         0
    Date/Time:       2012-09-05 07:47:33.363 -0400
    OS Version:      Mac OS X 10.8.1 (12B19)
    Report Version:  10
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    Assertion failed: (ret == kIOReturnSuccess), function -[PowerStateTracker init], file /SourceCache/SleepServicesD_executables/SleepServicesD-1.43/SleepServicesD/Powe rStateTracker.m, line 148.
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib             0x00007fff8cbbe212 __pthread_kill + 10
    1   libsystem_c.dylib                  0x00007fff897deb34 pthread_kill + 90
    2   libsystem_c.dylib                  0x00007fff89822dfa abort + 143
    3   libsystem_c.dylib                  0x00007fff89823dd5 __assert_rtn + 146
    4   SleepServicesD                     0x000000010ce44e09 0x10ce43000 + 7689
    5   SleepServicesD                     0x000000010ce43e75 0x10ce43000 + 3701
    6   libdyld.dylib                      0x00007fff87b2b7e1 start + 1
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib             0x00007fff8cbbed16 kevent + 10
    1   libdispatch.dylib                  0x00007fff8bba8e26 _dispatch_mgr_invoke + 883
    2   libdispatch.dylib                  0x00007fff8bba8a2a _dispatch_mgr_thread + 54
    Thread 0 crashed with X86 Thread State (64-bit):
      rax: 0x0000000000000000  rbx: 0x0000000000000006  rcx: 0x00007fff52dbcd28  rdx: 0x0000000000000000
      rdi: 0x0000000000000707  rsi: 0x0000000000000006  rbp: 0x00007fff52dbcd50  rsp: 0x00007fff52dbcd28
       r8: 0x00007fff77590278   r9: 0x0000000000000094  r10: 0x0000000020000000  r11: 0x0000000000000206
      r12: 0x000000010ce4e16e  r13: 0x000000010ce4e050  r14: 0x00007fff77591180  r15: 0x000000010ce4e06a
      rip: 0x00007fff8cbbe212  rfl: 0x0000000000000206  cr2: 0x00007fff77589fe8
    Logical CPU: 0
    Binary Images:
           0x10ce43000 -        0x10ce50fff  SleepServicesD (1.43) <0FDAEB5E-4E24-3836-AFBD-81E309DEB0DC> /System/Library/CoreServices/SleepServicesD
        0x7fff6ca43000 -     0x7fff6ca7793f  dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
        0x7fff87083000 -     0x7fff870d4fff  com.apple.SystemConfiguration (1.12 - 1.12) <7A8300B5-F5B3-39F0-A4B2-4C0C293FA29F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
        0x7fff871b7000 -     0x7fff871dbff7  libc++abi.dylib (24.2) <340E7C7B-DC93-3AA2-B015-B1C9541EC255> /usr/lib/libc++abi.dylib
        0x7fff87314000 -     0x7fff87315ff7  libSystem.B.dylib (169.3) <365477AB-D641-389D-B8F4-A1FAE9657EEE> /usr/lib/libSystem.B.dylib
        0x7fff87382000 -     0x7fff873a3ff7  libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
        0x7fff8754e000 -     0x7fff875fffff  com.apple.LaunchServices (539 - 539) <04FA5C61-6349-3841-9609-B650B6222800> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
        0x7fff87772000 -     0x7fff877a8fff  libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
        0x7fff877d8000 -     0x7fff87827ff7  libcorecrypto.dylib (106) <57BC99C6-3C3F-344C-BDD6-25E845D956F2> /usr/lib/system/libcorecrypto.dylib
        0x7fff87935000 -     0x7fff87936ff7  libdnsinfo.dylib (453.16) <38A3E0F4-E34C-3D45-A2C9-4CDE2DF007BD> /usr/lib/system/libdnsinfo.dylib
        0x7fff87aca000 -     0x7fff87b27ff7  com.apple.AE (645 - 645) <9C3E54BA-EE6B-3F02-8775-9C4AF40F40CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
        0x7fff87b29000 -     0x7fff87b2cff7  libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
        0x7fff893df000 -     0x7fff8944cfff  com.apple.datadetectorscore (4.0 - 269.1) <C94C372B-3821-3A46-A8C2-091AB1CFF7F4> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
        0x7fff897c9000 -     0x7fff89895fef  libsystem_c.dylib (825.24) <16B6B86C-53EE-36E8-AC2B-4AADC1008098> /usr/lib/system/libsystem_c.dylib
        0x7fff89e95000 -     0x7fff89e96fff  liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
        0x7fff89ec4000 -     0x7fff89ec7fff  com.apple.TCC (1.0 - 1) <DE7ECAC3-BD08-323A-9C12-EE4A49B72871> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
        0x7fff8a2ae000 -     0x7fff8a421ff7  com.apple.CFNetwork (596.1 - 596.1) <62830510-738D-3719-AD51-68E816B13BB7> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
        0x7fff8a438000 -     0x7fff8a440ff7  libsystem_dnssd.dylib (379.27.1) <B9F7B01D-8FAF-3CA5-909E-4D52B8D2DD8A> /usr/lib/system/libsystem_dnssd.dylib
        0x7fff8a914000 -     0x7fff8a97dfff  libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
        0x7fff8a989000 -     0x7fff8a989fff  com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
        0x7fff8a9a5000 -     0x7fff8a9a7fff  libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
        0x7fff8b648000 -     0x7fff8b656ff7  libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
        0x7fff8bab4000 -     0x7fff8bae5fff  com.apple.DictionaryServices (1.2 - 184) <B37F9A90-8954-3DEC-A216-8ABB15C615A1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
        0x7fff8bba4000 -     0x7fff8bbb9ff7  libdispatch.dylib (228.18) <0B6B6E7F-4D8A-3F3B-A4BF-6CF34638DBBB> /usr/lib/system/libdispatch.dylib
        0x7fff8bbbc000 -     0x7fff8bbbcfff  libOpenScriptingUtil.dylib (148) <4DB14EC4-422C-3AE8-83BF-354FEC197FD3> /usr/lib/libOpenScriptingUtil.dylib
        0x7fff8bbbd000 -     0x7fff8bc3efff  com.apple.Metadata (10.7.0 - 707.1) <ED39A710-1D87-3207-BB7D-4465B2673C1D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
        0x7fff8bd19000 -     0x7fff8bd26fff  libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
        0x7fff8bd82000 -     0x7fff8bd8afff  liblaunch.dylib (442.21) <224CB010-6CF8-3FC2-885C-6F80330321EB> /usr/lib/system/liblaunch.dylib
        0x7fff8bd8b000 -     0x7fff8bd8cfff  libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
        0x7fff8bdc2000 -     0x7fff8bdc7fff  libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
        0x7fff8c7ee000 -     0x7fff8cb05ff7  com.apple.CoreServices.CarbonCore (1037 - 1037) <5127E2AB-AE98-3393-AEF6-CA8C1090F921> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
        0x7fff8cbaa000 -     0x7fff8cbabff7  libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
        0x7fff8cbac000 -     0x7fff8cbc7ff7  libsystem_kernel.dylib (2050.9.2) <F646589B-13F8-3685-8C17-92C77993AE86> /usr/lib/system/libsystem_kernel.dylib
        0x7fff8d38e000 -     0x7fff8d3a5fff  com.apple.GenerationalStorage (1.1 - 132.1) <EAB41613-0145-3CE5-AA60-A8A791A3EE22> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
        0x7fff8d600000 -     0x7fff8d601fff  libDiagnosticMessagesClient.dylib (7) <56A70657-E8C2-3804-AB87-77DC100512A4> /usr/lib/libDiagnosticMessagesClient.dylib
        0x7fff8e379000 -     0x7fff8e3a4fff  libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
        0x7fff8e3a5000 -     0x7fff8e3aafff  libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
        0x7fff8e580000 -     0x7fff8e58fff7  libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
        0x7fff8fb43000 -     0x7fff8fb49fff  libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
        0x7fff8fb96000 -     0x7fff8fb9dfff  libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
        0x7fff8fb9e000 -     0x7fff8fefaff7  com.apple.Foundation (6.8 - 945) <0C972F73-0C07-3384-98F2-B176E0289494> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
        0x7fff8ffbd000 -     0x7fff8ffbfff7  libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
        0x7fff900df000 -     0x7fff900edff7  libkxld.dylib (2050.9.2) <4BEE9BC3-3708-330E-89D6-03E715D712CC> /usr/lib/system/libkxld.dylib
        0x7fff90313000 -     0x7fff90410fff  libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
        0x7fff9044b000 -     0x7fff904d8ff7  com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
        0x7fff905f7000 -     0x7fff9070fa27  libobjc.A.dylib (532) <9FA80CDA-97F4-3801-8879-0C1B976BC5CA> /usr/lib/libobjc.A.dylib
        0x7fff90767000 -     0x7fff90772fff  libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
        0x7fff9084e000 -     0x7fff90855fff  com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
        0x7fff90856000 -     0x7fff90868ff7  libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
        0x7fff90904000 -     0x7fff90904fff  libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
        0x7fff90988000 -     0x7fff9099ffff  com.apple.CFOpenDirectory (10.8 - 151.10) <FFBBA538-00B5-334E-BA5B-C8AD6CDCDA14> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
        0x7fff91197000 -     0x7fff9119dfff  com.apple.DiskArbitration (2.5 - 2.5) <348AC0CC-6BCE-3416-9141-A5C1164EDDFF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
        0x7fff912a3000 -     0x7fff9148cfff  com.apple.CoreFoundation (6.8 - 744) <47AEA7C7-EF9B-3FC6-AEBF-CE02FC650301> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff9194b000 -     0x7fff91959fff  libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
        0x7fff91cb1000 -     0x7fff91cbeff7  com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
        0x7fff91cbf000 -     0x7fff91cc5ff7  libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
        0x7fff91cc6000 -     0x7fff91d33ff7  com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
        0x7fff91f9d000 -     0x7fff9226aff7  com.apple.security (7.0 - 55178.0.1) <8102877E-C866-33D4-A947-02FC7F4BAA95> /System/Library/Frameworks/Security.framework/Versions/A/Security
        0x7fff924c7000 -     0x7fff9256dfff  com.apple.CoreServices.OSServices (557 - 557) <F5955FD8-E6E1-359F-9D9D-381E55E3EF37> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
        0x7fff925a2000 -     0x7fff9260aff7  libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
        0x7fff92615000 -     0x7fff92643ff7  libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
        0x7fff928ad000 -     0x7fff928aeff7  libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
        0x7fff934b2000 -     0x7fff934c5ff7  libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
        0x7fff934c6000 -     0x7fff934cafff  libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
        0x7fff934d7000 -     0x7fff93523ff7  libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
        0x7fff93524000 -     0x7fff93546ff7  libxpc.dylib (140.37) <C552985C-2171-3136-A1B9-3AB21CBF7C4A> /usr/lib/system/libxpc.dylib
        0x7fff93547000 -     0x7fff93644ff7  libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
        0x7fff9380f000 -     0x7fff93a0ffff  libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 21
        thread_create: 0
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=79.5M resident=36.3M(46%) swapped_out_or_unallocated=43.2M(54%)
    Writable regions: Total=40.1M written=332K(1%) resident=408K(1%) swapped_out=0K(0%) unallocated=39.7M(99%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    MALLOC                             31.3M
    MALLOC guard page                    32K
    STACK GUARD                        56.0M
    Stack                              8712K
    VM_ALLOCATE                           8K
    __DATA                             3240K
    __LINKEDIT                         52.8M
    __TEXT                             26.7M
    __UNICODE                           544K
    shared memory                        12K
    ===========                      =======
    TOTAL                             179.1M

    1. Mae sure that the ports you have specified in the Communiation tab are not specified anywhere else, either in PCo or in another application on the PCo worstation. For testing, set either MII or Legacy and use the same port number for each, just don't chec both boxes at the same time.
    The Legacy and MII port settings must be different, or you should receive an error in PCo.  As Steve mentioned, a port address can only be used once by any application on a given server.  Multiple PCo agents using the same port will cause a conflict as will trying to use the same port for both Legacy and MII connector for a single agent.  MII 11.5 only supports the Legacy (UDC) Connector, so I suggest that you do not select the MII connector check box and leave the port setting blank.  Select Legacy connector and set a port address for that connector.
    To determine if a port is available to use, you can open a command prompt and use the command netstat -a -o to list all the ports which are in use.  Please note, this is only active ports.
    2. I think you will need to get the compatibility issue between xMII 11.5 and PCo 2.1 answered by the PCo team; I have no way of testing this.
    MII 11.5 should work with PCo 2.1.  Configure the PCo agent to use the Legacy connector.  Create a UDC data server in MII and Pco should work like the UDS.
    Regards
    Chris Carney

  • Several Song Download problems- Error 8248 + Stops at "Processing"

    I bought one single song, it downloaded fine but it froze at "Processing file" it shows in my itunes but won't play.
    Then i bought an album (not seeing this) and it downloaded all the songs but got the error "8248"
    I searched the discussions and found problems with vcast, i uninstalled it and still nothing!

    Update:
    I restarted my computer, because once I closed iTunes it said the download would finish again. But now my purchases shows nothing new but one song from the album. And no downloads are going on..
    Yet in my purchase history it says I have the entire album and the other song, but i don't.

  • Error during burning process

    I am using OS10.4.6
    Powermac G5
    Final Cut HD4.5
    IDVD 5.0.1
    I have made a 27 minute movie in Final cut....i cannot seem to burn it in IDVD no matter what. I have been using this full time for 4 yrs and have never had this issue.
    I have tested other movies and they burn fine...i have tried throwing away all the render files and re-rendering the movie in final cut and then re-exporting it out. i have exported it out in 2 different ways...no matter what i do, I keep getting an error during the burning process that says
    there was an ERROR in the burning process
    which is leading me to believe that some file within my final cut project is corrupt or problematic.
    i have worked on this thing for about 50 hours and cannot start over from scratch, Help!

    dejavu! http://discussions.apple.com/thread.jspa?threadID=512852&tstart=0
    Ashley- I know you're probably getting desperate but please don't duplicate post.
    I'm not real familiar with iDVD but I know you have to export a QT movie from FCP and then burn that right? Your QT Movie, was it a self contained QT or a refernce Movie. If you have no idea what I just asked, when you exported it and you went to File>Export>QT Movie> did you select the box that says "make movie self-contained"?
    If so then a corrupt file is a moot (sp?) point. Can you open the QT Movie and watch it successfully in QT?
    If you CAN watch it in QT then your problem probably lies in iDVD.
    Answer these questions for us and we'll take the next step to getting a DVD in your hands.

  • Error in burning process

    I've burned my DVDs before, but this time it won't finish the burning. It says there was an error during the burning process before it's about to finish. I have 30 GB free on my HD, 1GB RAM, and a black Macbook. The other posts I saw on this topic had to do with upgrading Quicktime I think and I don't think that's the problem with mine since I bought it a little while ago and as far as I know, Quicktime hasn't been updated since August. (Except for the software updates, which I'm all up to date with)
    Also, after it gives me the message iDVD won't close out. I have to manually hold the power button down to shut off to get it functioning again.
    Any suggestions? Thanks for reading
    EDIT: I posted this in the wrong forum earlier, and am now posting in the right place and I got the error # it's -34502

    I searched the forum for the error message and found this
    http://docs.info.apple.com/article.html?artnum=303148
    it solved my problem.

  • Burning process errors

    When I try to burn a DVD ( iDVD 05) once it finally accepts a disc ( I have tried 3 different media - verbatim, fuji, & sony) this is the detailed message I get when iDVD stops -
    Errors were found during the burning process :
    The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
    I have seen this problem before and followed several suggestions posted here - including cleaning my drive w/ compressed air, running a CD/DVD cleaner disc and changing media. When I did this before, I was successful in burning 3 copies of one project. However, since creating my latest project I continue to get the same error notice, even when I've tried the same 3 suggestions. It will burn CDs no problem - any suggestions?
    I have:
    Hardware Overview:
    Machine Name: iMac G5
    Machine Model: PowerMac8,2
    CPU Type: PowerPC G5 (3.1)
    Number Of CPUs: 1
    CPU Speed: 2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 512 MB
    Bus Speed: 667 MHz
    Boot ROM Version: 5.2.5f1
    My project is only 2 slide shows w/ about 150 pictures. My hard drive has 77 GB free -

    fuji is up to 8x
    verbatim 8x/1x
    i have successfully burned the verbatim for over a year now and only bought the others when this problem occurred.
    when i checked the cleaner disc i used, it the cover stated that it was a CD cleaner - is there a different one for the DVD laser?
    thanks!

  • I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    I'm trying to burn an iMovie in iDVD and at the end of the whole burn process it says "Multiplexer Error" "there was an error during formatting".  How do I fix it so that it'll burn?

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • HELP - Receiving error message "The file has not been processed. An error has occurred which stopped the processing of the PDF"

    Have been using Adobe CreatePDF for many months successfully.
    Only recently over the past few days I have been experiencing errors for periods between 3-5 hours on every attempt to convert/combine files. The error reads: "The file has not been processed. An error has occurred which stopped the processing of the PDF"
    It will stay like this and no amount of refreshing the cache, logging in and out will help. I'm running Firefox 34.0.5, windows 7 64bit. Only solution I've found is to wait until the next day and it seems to be working again. Only explanation i can think of is some unexplained maintenance adobe is running behind the scenes because I'm often working late between 12am - 4am.
    When this problem happens, no file types will convert/combine I've tested JPEG, PDF and word docs to PDF.
    I log in and out of my account, I've cleared my cache, I'm using Firefox 34.0.5 which has always worked in the past I just don't understand how this error is happening for such long periods. Starting to reconsider this product when there are free alternatives to simply combine my PDF docs! please help.
    Tom.

    I am still experiencing this problem. Customer service from Adobe has been abysmal!
    I called Adobe tech support at 2am Australian time ( >1 weeks ago) and got onto a help centre in India. I was walked through all the troubleshooting steps and they remotely accessed my PC and confirmed that It was not my PC that was at fault. They reset my password and dialed into my adobe account from their end to attempt a simple conversion and export to PDF which failed. I was told that this problem is not something they can fix, and is a result of something on the back end of their software.
    They advised me that the problem would be passed to a fixed within 12 hours and they would call and email me to confirm everything was OK. I gave my phone number with (area and country code) my email but have not had any communication back.
    I am extremely dissatisfied, and just want this software to function. Is that too much to ask?
    Note: This problem is happening always now, regardless of time being used.
    Tom

  • BAPI call via UDF in mapping - error handling/stopping processing

    Hi,
    We are calling a BAPI in an ECC system from a UDF in message mapping.  The BAPI then calls other BAPIs to perform translations and validations on the message data.  An error could occur during a translation (for example), and an error flag would be passed back to the UDF (the actual error is persisted and handled in ECC).  What should be done in the UDF to stop further processing of the message?
    Latest PI and ECC releases and service packs.
    Thanks in advance,
    Brian

    Bhavesh,
    Thanks for the replay.
    You guys are scaring me a little....I've reviewed a bunch of blogs, threads and docs about the RFC API...such as Alessandro's SAP XI Lookup API: the Killer .../3404 and the "Mapping Lookups - RFC API" document.  Why would we have something like an RFC API available via a UDF if we can't react to an error should it occur??  In my case, all I want to do is "cancel" the message, or perhaps cause a controlled failure in the mapping so that the message doesn't get to the next step (load into ECC).
    What happens in Alessandro's process if an error is caught (trace.addWarning.....)?  I see that null is returned, but how does that affect the mapping process?
    I appreciate any help
    Brian

  • "Errors found during the burning process"

    Hello,
    I created an iDVD project that includes:
    1. 108-minute movie
    2. 6-minute movie
    3. 3-minute movie
    4. 12-minute slide show (3 four-minute slide shows)
    The project worked fine in the iDVD Preview. I then attempted to burn the DVD right from iDVD, and after 8 hours of encoding, I got the "Errors found during the burning process" message.
    I've read so many posts here with a hundred different possible solutions, but what is the best place to start to try to determine what the errors are and how to fix them?
    Following one suggestion, I am now creating a Disk Image first, but if errors still exist with a Disk Image, what do I do then?
    I'm working on a Powerbook G4 with the iLife upgrade. Thanks for any advice.
    Larry

    Larry,
    Here's my philosophy on iDVD troubleshooting, largley based upon my experience here at this forum, with heavy doeses of input from Ken Tidwell, Len Goff, Old Toad, F Shippey, with more recent input from SDIllini, Hui Cheng, and Beverly M.......
    #0 - always use "Save as Disk Image" instead of burning when troubleshooting iDVD
    #1 Try the easy usual suspect fixes first! After all if these don't work you can always try the hard fixes!
    Check the list on this download:
    http://dvd.kentidwell.com/iDVDUOFAQ2005.pdf
    But here are easy solutions IMHO:
    Get free space on the startup drive -20GB recommended
    Delete the iDVD plist file com.apple.iDVD.plist
    Repair Disk Permissions
    Clear Cache Files (CacheOutX, TigerCacheCleaner, Onyx)
    Do you have 12 bit audio - check your camcorder.......if not 16 bit you will have problems
    Fix Chapter Markers-don't put one at the beginning in iMovie (iDVD will do it for you)
    Chapter Markers - don't put one at the end.
    Chapter Markers - don't put one within 2 secs of a transition
    Delete other corrupt preference files (try using Preferential Treatment)
    #2 When the easy fixes don't work, you need to divide and conquer. The suspects are your a) your project media, b)your hardware, c)your system/user preferences, d)iDVD.
    A good test for a&d is to build a simple test project with other photos/movies/themes/audio and see if you can "save as disk image" the test project. The iDVD4 tutorial project is great if you've ever had iDVD4 installed on your machine. If this works it suggests that iDVD is working OK, and that something in your project is causing the hiccup.
    The most common problems in projects are CMs, audio and transitions. One way that sometimes clears them up is to export to full quality DV (or to tape!) and re-import into iDVD. In slideshows, funny JPEGs can bring iDVD down. The only method here is to try different groups to find the bad actor.
    OK let's assume that you can't burn (I mean "Save as Disk Image") the test project or the tutorial. This suggest that your hardware/system/iDVD is having problems and your project is probably fine. Then what?
    c) Hardware: if you can make a disk image but can't burn it, or it plays badly, then try creating a data DVD - if you can't do that I'd suspect your DVD drive. Try different brands of DVD-R (and I'd stick to -R, not +R nor +RW), I like Verbatim. Next on the suspect list is RAM. iDVD is the best test for RAM known to mackind. Try pulling non-Apple supplied modules and try again.
    OK, let's assume you can make data DVDs, but you can't make a good disk image, and you've tried pulling all non-Apple RAM. What next?
    Try creating a new user. New users have more limited sets of fonts and all new preference files and caches, not only for iDVD but for everything, and few (if any) third party plug-ins installed.
    Finally try reinstalling iDVD.......
    If you've done all this, a new system install might be in order, but come here first for advice from others before going that far!
    john b

  • ERRORS found during the burning process #-34506...any idea what this means?

    ERRORS found during the burning process #-34506...any idea what this means?
    This one project I want to copy to DVD keeps saying this when I go to burn (that is after nearly 2 hrs of processing). There is nothing wrong with the movie so i don't know why i'm having such a problem burning it. i guess to start i'd need to know what this code means (I couldn't find it in iDVD help).
    thanks in advance
    Jeremiah

    First I'd be certain that I had changed the preferences from best quality to best performance.
    Did you follow the chapter rules?
    *Make sure no chapter markers are within two seconds of the start or end of the timeline.
    *Make sure no chapter markers are within a transition.
    *Make sure no chapter markers are within two seconds of the end of a transition.
    You may have already done this, but
    Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
    :)Sue

Maybe you are looking for

  • Error in Claims Approval Process

    Hi, I Configured ESS.I applied LTA Claim through portal.It went fot the approval to the approver.It is there in Universal Worklist of Approver but when he clicks on it to approve instead of opening WebDynpro iView it is giving an error that "Portal R

  • Escaping special characters in RAW/BLOB

    Hi! I have a BLOB column that needs to be exported into a CSV Textfile. Sounds a bit scary but works fine when you escape the critical bytes. I need to do the following replacement: 5C -> 5C 5C ( = \ ) 22 -> 5C 22 ( = " ) 00 -> 5C 30 ( = ?? ) 0A -> 5

  • I have found apple store bug help me

    Hello everybody; I have aa big problem with my apple store account last night i have put my virtual credit card information to my account and than i have downloaded angry birds from apple store; and checked my bank account and i have shocked it didn'

  • Skype shows "Connecting" and never comes back

    Upgraded to v7 recently.  Running a Win 8 desktop.  Had no issues w/Skype for years. Now, after finally getting what I thought was a successful Installation, Skype just sits their in the desktop tray (pale icon) and says "connecting" and never comes

  • Wrong Suggest of Businer partner code

    I have a  problem in sales order with approval procedure and inactive business partner: When im trying to enter an inactive  business partner code in the document, suggest me  this code and let me create the draft to be authorized. How i can disable