Error 4450 solution

This is a thank you for the person who suggested a solution to the error 4450 message. I have windows seven and use windows xp (service pack 2) in the compatabilty mode, as was suggested, and this has solved the problem for me. Great suggestion. Thanks once again.

This is a user-to-user support site, so expecting an Apple employee to answer is futile.
Go to the support site for your PC and update the drivers is the best advice I can give.

Similar Messages

Error 4450 and error 4280

Ok this is bad, I am new to ITunes I purchased a bunch of songs and transfered them to my Ipod fine, then I burned them to 3 cd's no problem. Saturday I wen to record an audio cd with 100 dollars worth of new songs and I got error 4450 out of my I/O Magic dvd drive. I put another cd in my old TEAC cd drive and I got an 4280 error. I was using TDK CD-R MEDIA.So I went and got Verbatim media because it supposes to be excellent, same crap!!Same identical errors, I shuffled the songs and I created a new playlist out of the purchased playlist,I inserted the cd before opening Itunes, same errors and a dozen coasters!! I have the latest version of Itunes and I have no problem burning cd's with Nero out of my personal cd's. Now Itunes is giving me an " Access to the specified device,path is denied" when I do the diagnostics. IS THERE A WAY TO CONVERT THE M4P OF ITUNES INTO MP3 SO ICAN USE ANOTHER SOFTWARE TO BURN THE SONGS I PURCHASED? IS THERE A SOLUTION TO THIS PROBLEM?? Below is the diagnostic of one of my drives.The main one, the new one.
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: Cdr4_2K (5.3.2.31),
UpperFilters: GEARAspiWDM (2.0.6.1), Cdralw2k (5.3.2.31),
Current user is an administrator.
Video Display Information:
Matrox Millennium G450 DualHead - Français
Connected Device Information:
Maxtor 5T060H6, Bus Type ATA, Bus Address [1,0]
ST340016A, Bus Type ATA, Bus Address [0,0]
ST340083 2A USB Device, Bus Type USB
Maxtor OneTouch III Disk, Bus Type USB
ATAPI DVD DD 2X16X4X16, Bus Type ATA, Bus Address [0,0]
TEAC CD-W516EB, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: ATAPI DVD DD 2X16X4X16, Rev G7V9
Audio CD in drive.
Found 12 songs on CD, playing time 34:20 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:08:45
Track 3, start time 05:55:60
Track 4, start time 09:47:25
Track 5, start time 12:34:55
Track 6, start time 15:43:00
Track 7, start time 17:56:05
Track 8, start time 20:46:02
Track 9, start time 23:30:52
Track 10, start time 25:54:12
Track 11, start time 28:38:70
Track 12, start time 30:53:42
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16 24 32 40.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
E: TEAC CD-W516EB, Rev 1.0A
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TEAC CD-W516EB on CDR media at speed 4X.

Here is the diagnostics of the second drive.
Microsoft Windows 2000 Professional Service Pack 4 (Build 2195)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: Cdr4_2K (5.3.2.31),
UpperFilters: GEARAspiWDM (2.0.6.1), Cdralw2k (5.3.2.31),
Current user is an administrator.
Video Display Information:
Matrox Millennium G450 DualHead - Français
Connected Device Information:
Maxtor 5T060H6, Bus Type ATA, Bus Address [1,0]
ST340016A, Bus Type ATA, Bus Address [0,0]
ST340083 2A USB Device, Bus Type USB
Maxtor OneTouch III Disk, Bus Type USB
ATAPI DVD DD 2X16X4X16, Bus Type ATA, Bus Address [0,0]
TEAC CD-W516EB, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: ATAPI DVD DD 2X16X4X16, Rev G7V9
Drive is empty.
E: TEAC CD-W516EB, Rev 1.0A
Audio CD in drive.
Found 12 songs on CD, playing time 34:20 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:08:45
Track 3, start time 05:55:60
Track 4, start time 09:47:25
Track 5, start time 12:34:55
Track 6, start time 15:43:00
Track 7, start time 17:56:05
Track 8, start time 20:46:02
Track 9, start time 23:30:52
Track 10, start time 25:54:12
Track 11, start time 28:38:70
Track 12, start time 30:53:42
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16.
The drive CDRW speeds are: 4 8 10.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TEAC CD-W516EB on CDR media at speed 4X.

CD burn problem "unknown error 4450"

Hello everyone, I've been surching quite everywhere about the "unknown error 4450" but nothing found. Does someone know how to resulf this problem??? Please help, because I'd like to burn my downloaded songs.. Thanks!!

Hi Everyone,
I've had the problem since I've upgraded to Vista, I thought it was a driver problem until I had no problem burning a CD using Media Player. However I managed to find a solution (although not ideal).
If you run a CD diagnotic in iTunes, you'll find it thinks you are not an administrator for some reason. So I created a new administrator account, and then saved my iTunes library and logged in as the new administrator account. All of a sudden the problem disappeared!!!
So it looks like iTunes can't see that I'm an administrator. If someone can tell me how to fix this particular element, I'd love it. As right now, if I want to burn a CD, I have to change account, and re-import the entire library. Bottom line is it's a pain, but at least I know it's not a driver or hardware problem.
Hope this helps everyone.

ERRORS 4450 & 4250

I was able to burn CD's & DVD's with no problem, until recently. About 95% of the time I receive either error #'s 4450 or 4250. What do they mean and why do I keep receiving them?? I have searched the forum and did what other's have advised: slow down the speed, make sure the ATA... (which I have 3 primary's, secondaries, channels, and a seperate controller for), and nothing seems to work. Sometimes, iTunes gets a wild hair and allows me to burn a disc, but I have noticed, it was an old blank disc from about 6-7 years ago (no name). I am currently using Sony CD-R 700MB recordable. Does this make any difference?? I have also had my drives checked (CD & DVD); nothing is wrong. Someone....please HELP!!!!!! I would like to listen to something new in my car.
Thanks...

I downloaded itunes 7.1.0.59, purchased an album on itunes but now can't burn the album to cd. I get the unknown error 4450.
I see that others are complaining about the same problem but I do not see that anyone has posted any solutions.
Please let me know if a solution has been discovered.
Thanks

CD Burning error 4450 and 4850

I've tried burning CD's from my iTunes and it flat out doesn't work anymore. It starts and then cancels after a few seconds with 'error 4450' and sometimes it goes on to the second song but then cancels with an 'error 4850.' I've also noticed I can't import sometimes, even if the CD has virtually no scratches. Is it my CD drive or is something else up? Please help!

I'm having exactly the same problem with 4450 & 4850 errors, using compatible hardware and several different brands of blank media. I've tried uninstalling and reinstalling iTunes and made sure my drive's drivers are current. It seems that a number of users are experiencing the same problem, and I'm anxious to see an explanation and solution posted.

Error 4450 when trying to burn a cd

Please help me to fix this issue. I have the latest version of iTunes, and my burner is working correctly, and I am using blank discs.
I purchased $20 of music and made a playlist to burn, it checks, initializes and begins burn, then alerts me that it is being cancelled and gives me this error "the attempt to burn a disc failed, unknown error 4450"
I have the preference set to audio cd, checked my burner and discs, it all works. I tried restarting computer. Logging off and back on to iTunes, updated iTunes, repaired iTunes, removed iTunes, installed older version 7.1 but then it couldn't read my library, so reinstalled 7.6 and still not able to burn
Please help?!

OK, I feel like an idiot.
I tried all the suggestions, from lowering burn speed, running diagnostics, etc etc.
After contacting Apple and complaining about the service and inability to burn a CD of music I purchased, I finally opened my drive, and looked at the lens, it had a thin residue all over the entire lens and disc holding area, I simply wiped it off gently with a soft cloth, and voila!
I can burn now!

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

I am trying to burn a cd from my itunes playlist but it keeps canceling my burn and says their is an error 4450. What am I doing wrong?

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Cant burn a song playlist off itunes because of error 4450 please help!!!

Im trying to burn the new halifax cd onto a cd and it stops at no particular song and in different places and I have tried burning it anbout 4 times and it keeps getting cancedelled because error 4450 occurs What do i do!!!???

I had the same problem and I found that if you reduce
the burn speed to around 8 of less it fixed it. Do
this through edit>Preferences>advanced>burning
I set it to a speed of 8 but it still cancelled on the first song this time is there anything else i have to do to fix this?
copmaq presario Windows XP

I cant burn a disk because of error 4450 please help!!

Im trying to burn a halifax cd i baught on itunes and the disk burn gets cancelled not in any paticular song (ive tried a few times) and it says unable to burn because of error 4450 what do i do?

Hi, imanewbie. Somehow you've wandered into a forum devoted to iPhoto. You would probably do better to post your question in this iTunes forum, where other people who are saddled with Windows will try to help you. Good luck!

Adobe update process fails due to Error 130200. solutions please

adobe update process fails due to Error 130200. solutions please. Shyam

Is there anything else beside the number 130200?
Try downloading the update from http://www.adobe.com/downloads/updates/
If you still need help, please tell us your operating system details.

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work

Acrobat 9.5.1 update on Windows XP Error 1321 solutions don't work. I can't uninstall program. Error upon error.

Hi John,
I'm trying to install the SunMC 3.5.1 Console on
Windows XP with not much success. The install
displays the initial splash screen, but then fails
with the error :
The install wizard cannot proceed.
Aborting installation now...First, are you installing from a complete SunMC CD or CD image? If you just copied some files out of a CD/image you may have missed some jar files.
SunMC Consoles don't like to share systems with older versions of themselves. Try moving/renaming the directory your 3.5 Console is installed in (or uninstall it if you don't need it),... then try putting 3.5.1 in again.
All my demos/work/courses are on 3.5.1 on an XP laptop, so I know it works.
I think it's probably just not happy about 3.5 already being installed... so just move it out of the way for awhile to get 3.5.1 in (then put 3.5 back so you can have them both).
Regards,
Mike
The Java version is 1.4.2_03 .
The Release Notes etc don't give any clues.
Strangely, SunMC 3.5 works fine on this desktop..
Any ideas as to where I can go from here? This is
effectively stopping me from going from SMC 3.5 to
3.5.1, unless I can get the Console working..
Has anyone else had problems with SMC 3.5.1 on XP?
Thanks in advance.
John

Intermittant problem burning cd's - error 4450

just recently i am intermittantly getting error 4450 when burning a cd from itunes. i've tried different cd's but it still happens but only on some playlists (once it's failed on it though it will not work) & not every time. i have a new laptop & never had this problem on the old 1 & i'm using the same cd's. i'm not very technical so will need precise & easy instructions how to solve this please. thanks

Hi-
Try following the instuctions in this video tutorial.
Should be good to go this way.

This fixed my error 4450!!! :)

This helped my iTunes error 4450 follow these instructions from Apple Support and you can burn cds again.....
Hello from Apple!
Tina at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n305409
Removing iTunes, QuickTime, and other software components for Windows Vista
Learn how to uninstall iTunes, QuickTime, and other essential software components from your Windows Vista PC. To uninstall iTunes, QuickTime, and other software components from your Windows XP or Windows 2000 PC, see this article.
Removing iTunes, QuickTime, and other software components from Windows Vista
In some rare instances, it may be required to remove all traces of iTunes, QuickTime, and other essential software components from your computer. Use the following steps to remove all traces of iTunes, QuickTime, and associated software installed by the iTunes + QuickTime Installer.
Remove iTunes (Click for more)
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
Quit iTunes.
From the Start menu, click Control Panel.
In Control Panel, click Uninstall a program. The Programs and Features control panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
Select iTunes from the list of currently installed programs, then click Uninstall.
When asked if you would like to remove iTunes, select Yes.
After the uninstallation is complete, do not restart if you are prompted to.
If other entries were present for iTunes remove those as well.
In Programs and Features, remove any iPod Updater applications that are listed in the same fashion as iTunes was removed.
Restart your computer.
After the computer restarts, open Local Disk (C:) in Computer or whichever disk programs are installed on.
Open the Program Files folder.
Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed in steps 1-7.
Right-click the iPod folder and select Delete and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
Restart your computer.
Install the latest version of iTunes from http://www.apple.com/itunes/download.
Remove QuickTime (Click for more)
Here is some content
Quit QuickTime Player.
From the Start menu, click Control Panel.
In Control Panel, click Uninstall a program. The Programs and Features control panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
Select QuickTime from the list of currently installed programs, then click Uninstall.
When asked if you would like to remove QuickTime, select Yes.
After the uninstallation is complete, do not restart if you are prompted to.
If other entries were present for QuickTime remove those as well.
Restart your computer.
After the computer restarts, open Local Disk (C:) in Computer or whichever disk programs are installed on.
Open the Program Files folder.
Right-click the QuickTime folder and select Delete and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if QuickTime was successfully removed in steps 1-7.
Delete the QuickTime and QuicktimeVR files located in the C:\Windows\system32\ folder. Click Continue if Windows needs confirmation or permission to continue.
Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
Restart your computer.
Install the latest version of QuickTime from http://www.apple.com/quicktime/download.
Remove Apple Software Update (Click for more)
Quit Apple Software Update.
From the Start menu, click Control Panel.
In Control Panel, click Uninstall a program. The Programs and Features control panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
Select Apple Software Update from the list of currently installed programs, then click Uninstall.
When asked if you would like to remove Apple Software Update, select Yes.
After the uninstallation is complete, do not restart if you are prompted to.
If other entries were present for Apple Software Update remove those as well.
Restart your computer.
Install the latest version of Apple Software Update by installing the latest version of iTunes http://www.apple.com/itunes/download.
Remove Apple Mobile Device Support (Click for more)
Quit iTunes.
From the Start menu, click Control Panel.
In Control Panel, click Uninstall a program. The Programs and Features control panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
Select iTunes from the list of currently installed programs, then click Uninstall.
When asked if you would like to remove iTunes, select Yes.
After the uninstallation is complete, do not restart if you are prompted to.
If other entries were present for iTunes remove those as well.
In Programs and Features, remove Apple Mobile Device Support in the same fashion as iTunes was removed.1
Restart your computer.
After the computer restarts, open Local Disk (C:) in Computer or whichever disk programs are installed on.
Open the Program Files folder.
Right-click the iTunes folder and select Delete and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed in steps 1-7.
Right-click on the Recycle Bin and on the shortcut menu, click Empty Recycle Bin.
Restart your computer.
Install the latest version of iTunes from http://www.apple.com/itunes/download.
Notes
Do not manually delete the Mobile Device Support folder located at C:\Program Files\Common Files\Apple. Use Programs and Features as described in the steps above.
iPodService.exe Alert
Follow these steps if the message, "Cannot delete iPodService.exe: It is being used by another person or program" appears when you try to delete the iPod folder.
Make sure that iTunes and the iPod Updater utility are not open.
On your keyboard press Control-Alt-Delete. Select Start Task Manager.
Click on the Processes tab.
Locate the iPodService.exe in the list.
Click on iPodService.exe and choose End Process.
Quit the Task Manager.
Thank you,
Apple
**This message has been auto-generated. Please do not reply to this email. Replies will be ignored.
If you still have questions, be sure to visit Apple's award-winning Service & Support site. You'll find tons of helpful technical articles, information, tutorials, product manuals, software updates, and more that will help you get the most out of your Apple product.

Welcome to Apple Discussions.
Perhaps your old cable has developed a problem then? Anyway, good to see that you solve the problem. Enjoy.

Error 4450 when burning

Help! I am using an HP Pavillion ze5300 and I just started to get an error 4450 when attempting to burn CD's after reinstalling my OS. I can't find any updates that I missed!
Heres my diagnostic:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard Pavilion ze5300 (DC965A)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: RADEON IGP 345M\RADEON IGP 345M
IDE\DiskHITACHIDK23EA-60______________________00K2A0A2, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________0111___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev 0111
Drive is empty.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4240N on CDR media at speed 16X.

hmmm. a search at HP on ze5300 turns up a lot of different models:
Pavilion ze5300
... so i'm thinking ze5300 may be your series number rather than your model number.
what is the model number on your wee lass? the following HP document may be of some help with determining that:
HP Notebook PCs - Locating the Product Number and Support Information for the Notebook PC

Error 4450

Every time I try to burn a music CD I get an error 4450 message. I was able to successfully backup all of my music using the itunes backup, but when I then try to burn playlist it keeps saying it cannot burn: "The attempt to burn disc failed. An unknown error occurred (4450).
In the past it would burn a cd here or there and every now and then I'd get that message, but now it happens every time.
I totally uninstalled and then re-installed all of the itunes components and it still won't burn cd's. Any ideas? Thanks

I also get that error all the time. From my own research, I found out that error 4450 is not new to Apple. This error is code created within iTunes as a safe guard for music transfer. Any time iTunes senses your music being moved from the iTunes library to an external disc other than your system main HDD or a CD burner this error is designed to activate and prevent that action. The reason behind it is; iTunes does not know where and why you are transferring the music and how you intend to use that music.
With all the politics of music piracy and the bureaucracy behind who owns what rights in terms of music transfer, Apple safeguard what consumers download and with every content downloaded from iTunes are layers upon layers of massive security codes which overlay the music/video file itself. We will all keep on getting this code 4450 for a long time to come.

Error 4450 solution

Similar Messages

Maybe you are looking for