Error 4450 when burning

Help! I am using an HP Pavillion ze5300 and I just started to get an error 4450 when attempting to burn CD's after reinstalling my OS. I can't find any updates that I missed!
Heres my diagnostic:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard Pavilion ze5300 (DC965A)
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: RADEON IGP 345M\RADEON IGP 345M
IDE\DiskHITACHIDK23EA-60______________________00K2A0A2, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STRW/DVD_GCC-4240N_______________0111___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
D: HL-DT-ST RW/DVD GCC-4240N, Rev 0111
Drive is empty.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST RW/DVD GCC-4240N on CDR media at speed 16X.

hmmm. a search at HP on ze5300 turns up a lot of different models:
Pavilion ze5300
... so i'm thinking ze5300 may be your series number rather than your model number.
what is the model number on your wee lass? the following HP document may be of some help with determining that:
HP Notebook PCs - Locating the Product Number and Support Information for the Notebook PC

Similar Messages

Windows 7, iTunes 11.1.5 - Error 4450 When Burning Disc

When i attempt to burn a CD I get an Error 4450 message. I've tried different types of CD's, and burn speeds from 1x to Maximum Possible.
RUnning the latest version of iTunes and Quicktime. Any ideas would be greatly apprecaited.

Hello Filmwork68,
The articles linked below provdie some useful troubleshooting steps that can help get you back to burning on your computer.
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/TS1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Cheers,
Allen

Error 4450 when burning a disc.

Does anyone know what this means? I've never received this error before. I'm using Maxell discs, in case anyone needs to know.

Hi efandg,
Welcome to Apple Support Communities.
From what I gather, you’re running into an issue burning a disc with iTunes on your PC. Take a look at the article below which provides general troubleshooting tips that can help you resolve the issue burning a disc.
Can't burn a CD in iTunes for Windows - Apple Support
Cheers,
-Jason

Error 4450 whilst burning playlist,how can i fix this?

constant error 4450 when burning playlists in itunes. Running on windows XP. How can i fix this ?

CD Burn Error 4450 - solved!
See if this helps.

Im getting a error 4450 when i try to make a burn copy of my playlist

im getting an error 4450 when i try to make a burn copy of my playlist

Switch off background rendering. Trash your project render files. Don't re-render. Export.

How to fix error 4450 while burning cd

how to fix error 4450 while burning cd

This error is usually the result of hacking (jailbreaking) the iPhone. It is likely now bricked.
Error 1015: This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."

Itunes error 4280 when burning - HELP!

Hello,
I have just about had enough of trying to find a fix for my error 4280 when burning cd's from itunes! Ive wasted countless discs and I just dont get it. Its worked fine for nearly 18 months and now its stuffed! I dont have a Sony drive, mine is a COMBO, whatever that is... Can anybody help me?? Please!!
Jo

Still trying to fix this and now my drive wont allow me to copy photo's onto disc which Ive been able to do fine for the last 2 years. Im just about ready to throw the laptop out the window.... Anyone able to help?
Jo

HT203255 Why "Include Text CD" option causes error 4000 when burning disk on Itunes?

Why "Include Text CD" option causes error 4000 when burning disk on Itunes?

After running a diagnostics check in iTunes for CD/DVD drives it passed successfully:
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5421
iTunes 11.0.4.4
QuickTime 7.7.4
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number xxx
Current user is an administrator.
The current local date and time is 2013-06-29 16:42:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: fc2309a02da463fa503e9fbc2dbb6401
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   HL-DT-ST DVD+/-R, Rev
Audio CD in drive.
Found 8 songs on CD, playing time 27:37 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:55:20
Track 3, start time 07:17:07
Track 4, start time 11:37:15
Track 5, start time 14:40:03
Track 6, start time 17:46:68
Track 7, start time 20:52:56
Track 8, start time 24:52:26
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   4 8 10 16 20 24.
The drive CDRW speeds are:   4.
The drive DVDR speeds are:   4.
The drive DVDRW speeds are:   4.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   HL-DT-ST DVD+/-R on CDR media at speed 10X.

Keep getting error 4450 when trying to burn a cd from itunes

keep getting error code 4450 when trying to burn a cd from itunes library

lydia
we need much more info
Quoted from  Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
ÇÇÇ

Error 4450 when trying to burn a cd

Please help me to fix this issue. I have the latest version of iTunes, and my burner is working correctly, and I am using blank discs.
I purchased $20 of music and made a playlist to burn, it checks, initializes and begins burn, then alerts me that it is being cancelled and gives me this error "the attempt to burn a disc failed, unknown error 4450"
I have the preference set to audio cd, checked my burner and discs, it all works. I tried restarting computer. Logging off and back on to iTunes, updated iTunes, repaired iTunes, removed iTunes, installed older version 7.1 but then it couldn't read my library, so reinstalled 7.6 and still not able to burn
Please help?!

OK, I feel like an idiot.
I tried all the suggestions, from lowering burn speed, running diagnostics, etc etc.
After contacting Apple and complaining about the service and inability to burn a CD of music I purchased, I finally opened my drive, and looked at the lens, it had a thin residue all over the entire lens and disc holding area, I simply wiped it off gently with a soft cloth, and voila!
I can burn now!

Error 4450 when trying to burn audio cd....used to work fine with older version of ITunes....

Is Itunes not compatible with windows cd burner.....

I'm having the same problem using 700mb cd-r, but when I try to burn smaller size playlists (300mb) it works fine. I know that when burning as an audio cd the tracks about double in size, so this makes sense. However when I try to burn a playlist 400mb (ends up as 800mb on audio cd) itunes burns most of the songs but errors out on the last few. My guess is the cd runs out of room because itunes thinks it's a 800mb cd and tries to burn that much to it, when in reality it's only a 700mb cd. itunes will actually try to split a playlist that comes out to 1200mb across 2 cds, but still tries to burn 800mb per cd and errors once the cd runs out of room before it has 800mb on it. There needs to be some way to tell it the size of the cds, or at least an update where they fix the size detection. In the mean time it looks like we're stuck with manually splitting playlists so they're smaller than 350mb (if you have cds a different size than 700mb then just keep the playlist below half the cd's capacity).

Error 4250 & 4450 when burning an album

Burning an individual song? No problem. Burning a whole purchased album? No joy. What is being done to address this shortcoming?
I spent $9.99 on the music, and ****** away five CD-R's trying various settings to burn a music CD.
Not a Happy Camper! Any suggestions are appreciated
WGW

I downloaded itunes 7.1.0.59, purchased an album on itunes but now can't burn the album to cd. I get the unknown error 4450.
I see that others are complaining about the same problem but I do not see that anyone has posted any solutions.
Please let me know if a solution has been discovered.
Thanks

Error message when burning dvd

I have a flat panel 17" iMac with a superdrive. I have recently tried to back-up data onto a dvd. When I hit the burn button I soon get an error message. When I eject the dvd and put it back in to play nothing happens and the dvd is ejected only when I open iTunes. On a third and forth attempt the dvd gets spit out without any burn attempt.
Strangely, the first dvd I put in that was not readable on my machine I put in a Windows machine, which appears to read the dvd and I see the folders that I tried to burn, but obviously cannot open the files because it is a Windows machine.
I have read the discussions and dvd issues seem to be rife. I thought I had applecare but it appears it hasn't been registered and this issue is being addressed with apple. So I have not managed as yet to get any apple support.
Can anyone shed any light on my problem?
Thanks
PS: The reason for the back-ups is that I am soon going to upgrade to Tiger. I see from discussions that issues about dvds are rife.

I didn't note the message I'm afraid. However I have just tried to burn a dvd again and got the message 'An error occurred while burning the disc. This disc cannot be used.' I have tried the burn with two different dvds and I don't think the discs are the wrong ones. One was DVD-RW and the other was DVD-R. I recall that on another occasion there was an error number, which might have been 303, but I can't be sure of that figure.
Whilst on burning to disc, I want to make an image of a folder. I follow the instructions of navigating to the folder and click on it but the resulting image is only of the folder and not its contents. Am I doing something wrong here too?
Thanks.

Error message when burning Home Folder backup disk

I got this error message when trying to burn a backup disk (cd-rw) of my Home Folder. Could somebody please help me figure out what this means? -
The operation cannot be completed because one or more required items cannot be found.
(Error code -43)
Could not open the data fork of "<unable to get file path>" (-43).
Any help would be greatly appreciated.
iMac Intel Core Duo Mac OS X (10.4.4)
iMac Intel Core Duo Mac OS X (10.4.4)

There are a bunch of folders within your home folder, you may want to decide what exactly you want to back up or not.
Besides your personal folders (Desktop, Documents, Movies, Music, Pictures), you may want to decide whether you need to back up the library folder. The library folder generally contains preferences for most of your applications, and also caches and applications support files. These can become really big in some cases (Mine is more than 8GB, will not fit on a dual layer DVD). And the Library>Caches folder contains temporary files that will change from time to time, this might be the cause of your previous error since the shortcut is no longer valid.
Once you chose your files and make sure they will fit on your blank CD/DVD, you can just do what you did before, drag the folders to a Burn folder, make sure you are not running any other apps, so they won't be modifying the files.
There are programs you can use to backup to CD/DVD, Disc burner like Toast will span across several discs if the data does not fit on one. For a more automated solution, Carbon Copy Cloner (http://www.bombich.com/software/ccc.html) can backup to disc images which you can then burn to discs. I personally don't know a lot backup programs that provide good support for CD/DVDs, so I'll leave this to other folks.
If you are going to backup regularly, I would recommend spending some money on an external drive. You can find quite a few free software for automated backup and saves money and time on burning CD/DVDs. Plus you have the advantage of being able to boot from the external drive should anything bad happened to your internal one.

Error message when burning a disc of photos

I was trying to burn a disc of a large number of photos - around 400, and I got this error message: "The burn to the HL-DT-ST DVDRW GS23N drive failed. The disc drive didn’t respond properly and can’t recover or retry." I did a sample burn of about 5 or 6 photos and it worked fine, but this large project failed. I have a total of 1200 pictures I'm trying to burn. Any advice? Thanks for your help. I have spent hours trying to get this project done. It looks like it is in the "preparing to burn" stage for 10 or so minutes, then when it gets ready to burn, I get the failure message. Thanks again!

Take your choice:
Bad discs
Dust bunnies in drive blocking laser
Drive failing
Crashed/corrupt firmware controlling drive
Crashed system component
Try different brand of discs and/or slower burn speed
You don't say anything about your model computer. With some you can reset software. Of course sometimes restarting a computer can help.
Intel-based Macs: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/ht3964 Apple Portables: Resetting the System Management Controller (SMC) - http://support.apple.com/kb/HT1411 Apple Computers: Troubleshooting the slot-loading SuperDrive - http://support.apple.com/kb/HT2801
Failing all those it is not uncommon for optical drives to need replacing every 5 years or so.

Error 4450 when burning

Similar Messages

Maybe you are looking for