Error 4701 Burning Issues

Well... I have a strange one. I'm able to burn some playlists, but not others. I purchased and downloaded an album yesterday - attempted to burn.
Error: 4701
Thought I'd try another playlist/album. No problem. Successful burn.
Any thoughts?
I've downloaded the latest iTunes - just today. No installation errors.
Just ran the CD Diagnostics - Here are the results:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation XPS-Z
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.0.0.162),
UpperFilters: Cdralw2k (7.0.0.162), pwd_2k (7.0.0.162), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX\GeForce2 MX/MX 400
Found aspi32 running.

I'm getting the same emssage, diagnostic below -
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCV-RS222(CE)
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (7.5.0.50),
UpperFilters: GEARAspiWDM (2.0.4.3), Cdralw2k (7.5.0.50),
Video Driver: NVIDIA GeForce FX 5200 (Sony)\GeForce FX 5200
Found aspi32 running.

Similar Messages

Can't burn issues error code 4250-4280

After several failed attempts at solving my burning issues with Apple support (who had no idea what to do) I have found something out. The new "Protected AAC" formatted songs will cause a "failed burn" error message. I own 2 different computers and have tried 2 different types of CD-Rs. I have found that Windows Media Player will burn just fine, and that in iTunes I can burn all my old music (under "kind" look for "AAC audio file") just fine also. So I seem to have norrowed it down to Apple's new protected formats called "Protected AAC audio file"
So far this is all I've got. Anyone else have any ideas?
Windows XP Sony Vaio & Gateway Notebook
Windows XP Sony Vaio & Gateway Notebook

-54 is a Permissions error that's right ...
What are you trying to copy/burn ?
What version of Toast are you running ?
Remove the DivX QuickTime Plug-In and try burning again as it can mess up some burns ...

Burning issues (error 4450)

I know I'm not the only one who can't burn CDs from iTunes but I haven't seen anyone else ask about error 4450.
I get the following error message after iTunes attempts a burn for ten minutes:
"The attempt to burn a disc failed. An unknown error occurred (4450)."
My CD diagnotic is pasted below.
Thanks in advance to anyone who can help me sort this out.
~John
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
XPC_ SN85
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.201),
UpperFilters: GEARAspiWDM (2.0.4.3), NTIDrvr (1.0.0.5),
Video Driver: NVIDIA GeForce FX 5700\GeForce FX 5700
SCSI\DiskST380013AS____________3.18, Bus Type SCSI, Bus Address [0,0]
USBSTOR\DiskApple__iPod___________1.62, Bus Type USB
USBSTOR\DiskUSB2.0_CardReader_CFRW0.0>, Bus Type USB
USBSTOR\DiskUSB2.0_CardReader_Combo0.0>IDECdRomSONY_CD-RW__CRX320E_____________________NYK1___, Bus Type ATA, Bus Address [0,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY CD-RW CRX320E, Rev NYK1
Audio CD in drive.
Found 12 songs on CD, playing time 44:16 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:43:62
Track 3, start time 06:47:29
Track 4, start time 10:32:69
Track 5, start time 15:15:45
Track 6, start time 19:16:07
Track 7, start time 22:13:03
Track 8, start time 26:41:16
Track 9, start time 30:05:66
Track 10, start time 33:14:64
Track 11, start time 36:01:74
Track 12, start time 41:47:62
Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 0 0 0.
Get drive speed succeeded.
The drive CDR speeds are: 52.
The drive CDRW speeds are: 52.

I was having similar errors while burning CDs. I don't know specifically what they're for, but I think it may have something to do with the memory on your system. I read that iTunes has to copy each song to memory before it actually burns it to the CD. If you're doing other things on your PC, iTunes may be running out of temporary memory. Try restarting Windows to refresh, then burn another. It worked for me.
Dell Dimension 4600C Windows XP

Device error during burning w/iDVD

Well, I spent some time learning about codec et al and was able to get a divx file to run on QT... movie looks good on MAC when running QT. I put into idvd and it also looked good as I ran it in preview. Spent several hours in burn process and at the end the dvd was ejected with below message. The dvd physically looks properly burned but it is not accepted by my dvd player... I've made many imovie projects that burned properly in idvd.
"The recording device reported the hardware error: No write current. (0x03, 0x01.)"

Rick,
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (not the .img, the one below) in the left-hand window. Click the Burn icon. A new window should drop down. Select a burn speed. Your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (DVD-R preferred by me.) Click the Close button. Wait. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
b Also, you can use DVD Player to play the virtual disk to check your iDVD 5 project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
Use Verbatim DVD-R. Burn at 4X or slower. Office Depot and Best Buy carry them by me.

HELP! OOstatus error=- 47, ERROR WHEN BURNING

I am getting an error that states "osstatus error = -47" when I try to burn a disc, does anyone know the workaround for this??
I am using 2ghz intel core 2 duo macbook
thanks in advance!

dicktatorsmith
We first need to determine what program is involved and the details of what you are doing?
You cannot burn your content to DVD disc (assumed DVD-VIDEO on DVD disc) with just Photoshop Elements and its associated Elements Organizer? So, if you are getting this error in your burn to disc, I am suspecting that you are not working with Photoshop Elements.
So, what program and version of it are you working with and on what computer operating system is it running?
The error that you present at burn has been seen before with no one description of what it means (that I have ever seen). Sometimes defragmentation of the computer hard drive and/or using another brand/type DVD disc resolves the issue. If you are in Premiere Elements burn dialog, does hitting the Rescan button a few times have any impact on the situation?
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l
Please review, consider, and then let us know the outcome.
Thank you.
ATR

Help: Error Code burning DVD

Mac OS 10.8.4
iDVD 7.1.2
iPhoto 11 (9.4.3)
I have successfully converted an iPhoto slideshow to a quicktime movie which plays fine on the computer but refuses to burn to disk in iDVD.
I have also tried to burn with Disk Utility and Toast.
The error I get when burning is:
The drive reported an error:
Sense Key=MEDIUM ERROR
SENSE CODE=0X0C
WRITE ERROR

It does sound like a burn issue but follow this workflow in order to isolate the encoding process from the burn process. This way you won't have to go thru the encoding process each time you try to make a successful burn.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Yet another CD burning issue--won't finish "finishing"

The subject pretty much says it all. When I try burning a CD, the computer seems to go through the process just fine until the status becomes "Burning disc.....finishing," at which time, it stops. iTunes still works and is responsive, but the CD won't finish.
I've also tried burning discs with Windows Media Player, but it doesn't seem to work either.
Immediate responses would be greatly appreciated--I need to burn a disc as a gift ASAP!
Thanks in advance.
(Please note that at the time I ran the diagnostics, it still said it was "Burning disc.....finishing." Not sure if that's relevant or not, but figured it was worth noting anyway.)
Microsoft Windows XP Professional Service Pack 1 (Build 2600)
Emachines xxxxxxxxxxxxxx
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Video Driver: Intel(r) 82810E Graphics Controller\Intel(R) 82810 Graphics Controller
IDE\DiskWDCWD800BB-00JHC0_____________________05.01C05, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSAMSUNGCD-R/RW_SW-224B_________________R201___
Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
Current user is an administrator.
D: SAMSUNG CD-R/RW SW-224B, Rev R201
Drive is empty.
The last failed audio CD burn had error code 4220(0x0000107c). It happened on drive D: SAMSUNG CD-R/RW SW-224B on CDR media at speed 12X.

hmmmmm.
i think i found your drivers and downloads page at Emachines:
Emachines T-series T1150
but there's not a lot of items of interest available there.
on the other hand, according to Samsung's support site, there's a newer version of the firmware available for your SAMSUNG CD-R/RW SW-224B. you've got R201, and they have R205 available for download:
Samsung SW-224B
so it might be prudent to contact your Emachines technical support, tell them you're troubleshooting a burning issue, and asking them if the newer R205 firmware is compatible with the particular Emachines system that you have.

How to fix itunes unknown error 4210 burning cd

iTunes for windows. Have ripped CD into iTunes but when I commence burning to a blank cd I get unknown error 4210. Have burned CDs this way only yesterday.

Hi JemimaP,
If you are having issues burning CDs in iTunes on your Windows machine, you may find the following articles helpful:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
Apple Support: Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/ts1436
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Regards,
- Brenden

For All Serious Burning Issues!!

If you are having serious burning issues and error messages, and after you have freed up atleast 5 gb of HD space on your STARTUP drive (Startup is the drive that your OS is running on) then go to:
http://superdrive.cynikal.net/
and download the appropriate Superdrive firmware for your computer. i have used this site several times. Make sure you follow the directions. This is a major change to the software that runs inside of your superdrive, but it usually does the trick for me when I have issues. If you have previously updated your firmware, and are now having issues, go back to the original firmware and see if that works, (it usually does for me). I have updated several times, and never had any issues. My superdrive is atleast 2 and a half years old with heavy use.
Not sure if Apple approves of doing this, but they don't seem to ever be very helpful with error messages, so this is the best solution for me.

Not really. You only need enough space to cover the amount of data being burned to the disc, which in most cases is 4.7 gb. You will need more if you are burning larger dvd's and/or dual layer. For years, I have only kept roughly 5 gb available on my system and haven't had any problems.

Iphoto slideshow to idvd: quality & burning issues...

I've made a few slideshows in iphoto due to the Ken Burns effect and also the ability to choose full screen or widescreen. I made DVDs for friends with full and myself with wide for my widescreen- and that works fine.
My question is about the quality of the movies. Obviously a substantial loss of quality from viewing the show in iPhoto on my Powerbook...
Is there a better way to do this with better results? Using iMovie? (Never have used that app before..) Each show has 100-250 slides and I choose a music playlist from iTunes. I am a quality freak and looking the uncrisp images isn't too thrilling.
(Even when playing the disk image in the DVD Player on my Powerbook and comparing with the original project file- it's a little more fuzzy.)
Also, I just got an external Lacie burner (I have combo drive) and have much unsuccess with burning. I have repaired permissions and create as a disk image in iDVD. It plays back great from the disk image in DVD Player on Powerbook. This specific movie is 2.4 GB and I have 10.1 free dis space.
Problems: (tried with 2 or 3 different movies)
*Disk Utility will not burn the image. It begins and then stops and says there are errors (not specific)...
*iDVD goes through 4 or 5 steps and right at the end says "Errors during burning"
(I was also getting a multiplexing error, but I freed up some space and didn't get that last time)
*TOAST- Using the DVD-Video from Video-TS (as recommended on various boards) does not work. It finishes but won't verify and nothing plays...
*TOAST- using DVD-Video: The menu made in iDVD isn't functional. Can't choose different slideshows... Won't highlight, etc...
*TOAST- using "Data" DVD-ROM (UDF):
THIS IS THE ONLY THING THAT HAS WORKED AND PROJECTS ARE ABLE TO BE VERIFIED. MENUS ARE FUNCTIONAL IN MY 2 DVD PLAYERS...
I have the newest versions of Toast and iPhoto and iDVD. It's been very frustrating. Can't figure out why iDVD and Disk Utility won't burn... and TOAST only works using "Data" instead of Video... My Powerbook is a 60 GB 12" G4 1.33 model. I'm so tempted to upgrade to a bigger hard drive and a Superdrive but I don't know if that will help anything.
Thanks for listening!

Video DVDs are 720X480 (NTSC). Much lower resolution than straight iPhoto slideshows and your original photos. Nothing you can do about this until either HD-DVD or Blu-Ray technology come to the market and are affordable.
iMovie will not be better resolution after it is sent to DVD. You could export to HD resolution QT files (H.264, etc.) and play those on computers with QT and keep higher resolution. But those won't play with commercial DVD players.
Disk Utility will not burn the image.
Can you verify the mounted image with Disk Utility?
Can you burn other data DVDs with the finder and with Toast succesfully?
You should be able to use both the Video_TS drag into DVD-Video for Toast and the direct image burn in Toast, as well as Disk Utility. I wonder if there is an error in the image, so see if you can verify the mounted image with DU.
John B

IMac error: Failed to issue COM RESET

After my iMac got slower en and freezed i tried resetting the Pram and in single user mode i did *fsck -fy*
then i get the following error:
*Failed to issue COM RESET successfully after 3 attempts. Failing...*
after that nothing worked anymore!!! only the Windows vista partition worked for a day or two. is this a harddrive failure something worse?
Message was edited by: Birkhoff (title changed)

I believe posting relevant facts is productive, & a very relevant fact here is that you are trying to use a drive with an interface (SATA-II) that Apple does not currently support in its laptops.
SATA-I controllers are supposed to be compatible with SATA-II drives, but many of them are not. The problem is how some controllers implement auto negotiation, which is supposed to tell the drive to fall back to SATA-1 speeds with the slower controllers. Some SATA-II drives have a jumper to force the slower speed if auto negotiation doesn't work; some do not.
How this compatibility problem came about, & why the jumper is required, is complicated but the short version is that at least four different specification bodies had some responsibility in producing SATA specifications, & not all controllers were designed to the same standards. This includes not just the controllers Apple has been using but those in many PC's as well.
So I agree that Apple dropped the ball, but not necessarily the way you might think: it should have made it very clear that the firmware update implemented an unsupported interface speed, that it might cause problems, & (most importantly) provided a reversion strategy to the former firmware if it did.
Hopefully, Apple will take another 'swing' at this & either provide that reversion strategy or a new update that at least allows the controller to work more reliably with the faster interface. But until then, unless your drive has the jumper, my previous suggestion is probably the best you can do.
BTW, none of the current mechanical drives available for laptops can saturate a SATA-1 bus except for brief bursts from the drive's buffer, so the real loss in performance of running a single SATA-II drive at SATA-1 speeds is almost negligible, something you might notice in a benchmark but not in real-world use.

Burn issue

I am trying to burn a cd but I keep on getting an error...#4450. Help!

Hi lorut,
Thanks for visiting Apple Support Communities.
Start with the troubleshooting tips in this article if you receive an error when burning a CD in iTunes:
Can't burn a CD in iTunes for Windows
http://support.apple.com/kb/ts1436
Cheers,
Jeremy

Error during goods issue-Posting period not open

Hi ,
I am getting an error during goods issue which says posting period not open.I guess that we have had deliveries that were created and in process while crossing over from one financial period to another quite frequently before, but we were still able to goods issue them in the next period. Can anyone tell me why this error happens and if there is any work around for this?
Thanks,
Hari.

Hi,
Goods issue takes place, say on a given date and this should be updated, so that the plant valuation changes are recorded. But the periods need to opened to do this. Normally there are two posting periods available, one is in MM, done by t.code MMPV and the other in FI, t.code is OB52.
So, in MMPV we need have the current month as the posting period. But in your case it was allowing, probably because you have marked the indicator " allow posting in previous period " in MMRV t.code as our friend just conveyed.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Power calibration error when burning?

I get a power calibration error when burning from IDVD.
Any suggestions as to how to fix it?

Basically a power calibration is the drive writes to the blank and then tries to read it back and adjusts the laser power accordingly to get a proper burn. So there are a number of reasons you might get this problem.
One is the media itself. A bad disc or poor quality media might give you this error.
Next, you may have a dirty laser and running on of those cleaning CDs (they have little brushes on them to dust off the laser) might do the trick.
Third, could be a laser on the drive is giving up the ghost. Hopefully it is not the last one.
Patrick

Unknown error when burning disc

I get an unknown error when burning playlists to blank discs. My computer begins to write the discs, but stops after a song or two.

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Error 4701 Burning Issues

Similar Messages

Maybe you are looking for