Error 49.4c02 with Reader 8.2.1

Hi,
We have:
HP Laserjet 2430 FW 08.112.3 (latest) with HP JetDirect J7949E FW V.33.14 (latest)
HP Laserjet 4350 FW 08.008.6 (older) with HP JetDirect J7949E FW V.28.47 (older)
When printing a document with reader 8.2.1, we get error 49.4c02 on the HP printer LCD.
When printing the same document with reader 7.0.9 built into Solaris 10 update 4, we don't get any errors and the document prints fine.
I have tried to deselect/select several options in the print menu, eg: Download asian fonts, Optimize for speed, Level 3.
I have also noticed some posts of this happening on the Windows version.
Does Adobe acknowledge this bug?
Karl

This is a Fix that has worked for us, so far:
To "deleted a suspect print job" is not really a fix as the next corrupt job will cause the error again. I don't think anyone knows exactly what is wrong with the job either. I noticed the problem when we upgraded past Adobe Reader 7 (versions 8 and 9).
Last year we fixed this problem on HP color 46x0 and 4700 printers by replacing the 615n card (which has had a lot of problems, but that is another thread) with a 620 card.
I have over two hundred 4100 series through 4300 printers in use at my company. A couple of months ago we had 4 of these 49 errors fixed by having the system board replaced under warranty. We noticed that the replacement board had and older firmware installed. I have been very good at keeping up with updating firmware, so all my HP printers have the latest image.
Some may mention to make sure you have the "latest versions of firmware for the printer . ." This is what we found to be the problem. All of my 4250 printers have firmware 20080319 08.015.0 installed. When users reported the 49 errors on 4 printers a couple of weeks ago I installed the 2007 firmware image on them. In two weeks, none of these printers have had the problem. If you remote into the printer and look at the Event Log, you can see how often this error occurs. I was seeing it happen about every 50-100 pages. I have over 4,000 pages now without a problem on the printers the older image was installed on. I just did 2 more last night and plan on doing this to all over the next month.

Similar Messages

Error signing pdf with Reader XI

When I sign a pdf using Acrobat Reader XI, I get the error The Windows cryptographic service provider reported an error: Object was not found Error code: 2148073489. Is there a way to fix this?

Any update on this issue. I have several people having this issue and would like to know if anyone has been able to locate a resolution.

Error msg. emailing with Reader

Hi All,
Until today, I have been able to email using reader. Today, I am getting the following error message: Safari can’t create an email message because Google Chrome doesn’t support sending webpages from Safari.
I am using Safari browser not Google Chrome. Thanks in advance for your help.

Nevermind, I got. Somehow, the default email reader in Mac Mail was changed to Google Chrome.

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

With Reader XI There was an error opening this document. Access denied

Hi there, It looks like I have a simular problem. I also get the error "There was an error opening this document. Access denied." This when I tried to open the file by clicling on the file. When I try to open the file from out Adobe reader it gives me the error "You don't have permission to open the file" I use Adobe XI. My OS is W8.1 By clearing protected mode doesn't help. This is what I found sofar: Only the PDF files in the documents and subfolders are giving me this error. PDF files in other folders are fine. When I copy PDF files from the documents folder to Desktop they open without any problem. First I thought I might be a permission problem with the Documents folder, but I have full access. Other files in the Documents folder like Word and Excel files open fine with MS Office. My laptop has WinXP and is shared with my PC when I open PDF files on my laptop by using the network share they open without problems. So it looks like only the PDF files in my Documents folder. I'm not sure but before upgrading to W8.1 from W8.0 I can't remember if I had this problem, but I think I did not have it. To make it even more interested is that I have also Adobe Acrobat Writer on my PC what I use for my buisiness. When I open the PDF files with this program they open without any problem. Therefore I believe it is not a permission problem, I still believe it is a problem with Reader XI, but than only after upgrading to W8.1, but as I already mentioned I'm not sure for 100% only that sofar I know it never happened under W8. Has anyone out there simular problems? And hopefully with a fix.

This is what I did sofar: Deleted reader XI and reinstalled same problem.
Because I think the problem is with reader XI I deleted again XI and installed reader X.
With this version I can open PDF files located in the documents folder without any problem.
For now I keep using version X until they fixed version XI
This proves that reader XI will not work under W8.1 when opening PDF files in de documents folder.
Bennie

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Acrobat Reader X : Error using javascript with ProtectedMode on

Stumped with an issue.
I have a PDF with a mouseup event to trigger the PDF to SAVE to a network location and it works fine in v9 but with Reader X and enable Protected Mode turned on it throws the following error:
NotAllowedError: Security settings prevent access to this property or method.
Doc.saveAs
I get the above error even though the NETWORK PATH has been added in Reader preferences as a trusted PATH and the web site is listed as a trusted site.
What am I missing here?

According to the documentation, I am supposed to be able to setup a POLICY file "ProtectedModeWhitelistConfig.txt" and add parameters to it such as
FILES_ALLOW_DIR_ANY = c:\tempfiles\*
FILES_ALLOW_ANY = c:\tempfiles\*
I want the ability to save to a UNC network path...it worked fine in Acrobat 9 and now with sandbox security and protectedMode in "X" nothing works.
In Acrobat X, if "enable protected mode" is on, NOTHING works and an error is thrown. If it is unchecked, the saveAs works fine.

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser!

I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it

I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it

Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G.

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore.

Im having trouble with error 13019 I have read the previous discussions about this matter and have tried to do them except for the fact that under the music tab when clicking on my ipod every thing is frozen. It s not my comp. and i dont wish to restore. Please help!

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Error connecting to WS with Adobe Reader with Reader Extension server

Hi all!
I'm using a form designed with Designer with Reader Extension. This form
connects to a ws in order
With Acrobat and the Acrobat Reader under 7.0.5 it's all OK, but another
user with Acrobat or Adobe Reader 7.0.8 received an error message when
trying to connect to the WS.
The error says that there was a problem reading the file and specified the
folder url in which there is the web service.
I remember that for some reasons, after 7.0.5 you've to certified the
document, but I can't certify a PDF form created with Designer :(
Anyone can help?
Thanks,
Alessio

<[email protected]> ha scritto nel messaggio news:[email protected].. > Well, I just tried it to make sure, and I was able to call a web service > fine from 7.0.8. Is it possible that someone at some point when Acrobat > asks if you want to allow or block the operation chose block and clicked > the check mark to make it remember that chose and automaticallly apply it? > I notice that if I choose block it displays a generic error message saying > it needs to be a certified form (which is wrong). Does it work from other > machines? > Yes, maybe the users click on the block button. By Clicking on the Allow button, all works. Alessio

I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

I purchased an audio book from I tunes but when I sync with my I phone it respond with error saying could not read or write the file. It only sync parts 2

Those videos are probably not in an iPod-friendly format. It’s picky about that. You can try converting them, if possible.
As for the audiobooks, are you sure they haven’t synced? You’ve enabled it to sync books and checked the “Audiobooks” section of your iPod?

Designer 8.0 Form compatibility with Reader 6.0 - error message

I created a form in Designer 8.0. I saved it to be compatible with 7.0, but for the most part need for it to be compatible with Reader 6.0, which is not an available option. This form actually works fine in Adobe Reader 6.0 but whenever a user initially opens the form, a message pops up advising the user that all features may not work and recommending that the user upgrade. Clicking on OK then produces a new message advising the user that they must upgrade and providing the link. Notwithstanding that message, if the user clicks Cancel the form opens and can be used as intended, with a few nonfunctioning features (like the Print button on the form). Most of the intended users are running Adobe Reader 6.0, so any help on preventing one or both of messages would be very much appreciated. (Note: This same issue was posted on March 2, 2006 related to Designer 7.0, but no answer was supplied. Im hoping there is an answer to this issue for Designer 8.0).

I created a form in Designer 8.0. I saved it to be compatible with 7.0, but for the most part need for it to be compatible with Reader 6.0, which is not an available option. This form actually works fine in Adobe Reader 6.0 but whenever a user initially opens the form, a message pops up advising the user that all features may not work and recommending that the user upgrade. Clicking on OK then produces a new message advising the user that they must upgrade and providing the link. Notwithstanding that message, if the user clicks Cancel the form opens and can be used as intended, with a few nonfunctioning features (like the Print button on the form). Most of the intended users are running Adobe Reader 6.0, so any help on preventing one or both of messages would be very much appreciated. (Note: This same issue was posted on March 2, 2006 related to Designer 7.0, but no answer was supplied. Im hoping there is an answer to this issue for Designer 8.0).

Error 49.4c02 with Reader 8.2.1

Similar Messages

Maybe you are looking for