Error 49: LDAP Invalid credential Supplied when installing Identity Server

I am installing oracle Acess manager with Active directory for windows server 2003. While installing
the identity server we facing the issue with
Error 49: LDAP Invalid credential supplied. Please see the attached screen shot for more details.

At which stage are getting this error?
If you are getting this error after specifying LDAP Directory details during identity server install, make sure that your username/password for AD are correct.
if your domain name = example.com
and the user you are using is under cn=users in AD use:
1. cn=your_username,cn=users,dc=example,dc=com
and your password
2. if this doesn't work, try:
[email protected]
and your password.

Similar Messages

Invalid Serial Number when installing Acrobat 9 on new PC

Invalid Serial Number when installing Acrobat 9 on new PC

I wonder if this is related to the previous version issue with Acrobat 8 that displayed the same or similar error?
Here is the text from a very old document for Acrobat 8 KB if you want to try it but I don't know if it will work
Error: "You have entered an invalid serial number..." when you try to launch Acrobat 8 Standard on a Dell computer
Issue
When you try to launch Adobe Acrobat 8 Standard on a Dell computer, the program returns the error message, "You have entered an invalid serial number. Please re-install Adobe Acrobat 8 Standard and enter a valid serial number when asked."
Solution
Check the alm_config_files folder for a duplicate AdobeConfig.xml file.
Navigate to the following folder:
C:\Program Files\Adobe\Acrobat 8.0\Acrobat\alm_config_files
The following two files should appear in this folder:
AdobeConfig.xml
AdobeConfig.xml.aiwbf
Delete the AdobeConfig.xml file.
Rename the AdobeConfig.xml.aiwbf to AdobeConfig.xml by deleting the "aiwbf" suffix.
Launch Acrobat 8 Standard.
Additional Information
On some Dell computers, a duplicate AdobeConfig.xml file is created when Acrobat 8 Standard is installed. The AdobeConfig.xml file without the "aiwbf" suffix is written for a volume-license version. The correct AdobeConfig.xml file is given the suffix. When a retail version of Acrobat tries to read the volume-license AdobeConfig.xml file, Acrobat returns the error.

Error message when installing SQL Server 2014 Express

When installing SQL Server 2014 Express,
I get the error shown below.
Why do I get this and how to correct for it?
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.MFC,version="8.0.50727.4027",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'. Please refer to Help and Support for more
information. HRESULT: 0x80070422.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
Thanks

Hi,
here is the log file:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052081
Start time: 2015-04-14 10:25:00
End time: 2015-04-14 10:38:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for Conn: Use the following information to resolve the error, and then try the setup process again.
Next step for SDK: Use the following information to resolve the error, and then try the setup process again.
Next step for BC: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Next step for Browser: Use the following information to resolve the error, and then try the setup process again.
Next step for ComponentUpdate: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: BRENDA-PC-HOME
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: italiano (Italia)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Brenda\Downloads\SQLEXPRWT_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\SERVIZIO DI RETE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, CONN, BC, SDK, SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: Brenda-PC-Home\Brenda
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: true
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools SDK
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Client Tools Backwards Compatibility
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Feature: Setup Support Files
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Setup Support Files
Component error code: 1935
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SqlSupport_Cpu64_1.log
Error description: An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.6229",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86",type="win32"'.
Please refer to Help and Support for more information. HRESULT: 0x80070422.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=SqlSupport.msi%40CreateShortcuts%401935%3a0x80070422
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150414_102458\SystemConfigurationCheck_Report.htm

Unable to Install Identity Server : Error 20: Identity System Configuration

HI I am trying to setup IDM system as per below order.
Oracle DB -> OID (two Instance OID1 & OID2 on separate RHEL5 box) -> OVD ( OVD1 & OVD2) -> OAM
I have successfully installed this setup upto OVD. But once I started Identity Server installation, installation is breaking with Error " Setup.product.install, com.oblix.installshield.ObExecWizardAction, err, There is an error. Please try again. Error 20: Identity System Configuration already exists on the specified LDAP directory server."
Earlier Few of my tea-mates Tried installing Identity server unsuccessfully thats why may be now I am not able to install it again.
Let me tell you at what point I got above error.
Identity server installation asks two time Directory server information. First time I selected option as "Data Anywhere" and after that I have given the details of OVD (IP/Ports/cn=orcladmin/password) and I got above error. I ignored that error and continue installation and second time I selected options as " Oracle Internet Directory" and gave OID details. again I got same kind of information.
So I have droped RCU and reinstalled OID ( not OVD) and tired Identity installation but no luck got same error at first stage (OVD/Data Anywhere). This time I did not continue installation.
Please help me to resolve this issue and I also want to know how can I remove Idenitity Server Information from OVD ( and OID too for future reference).
Thanks.
Edited by: 985360 on Feb 1, 2013 9:57 AM

Hi Parmar,
The error message "Identity System Configuration already exists on the specified LDAP" is complaining that the schema objects required by OAM already exsit on the specified ldap. The schema update needs only to be performed once (usually the first Identity Server installation, although it can be performed manually as a standalone operation) on each ldap instance, after which subsequent installation of Identity Servers do not need that step, which can be avoided by answering "No" when asked if it is the first Identity Server to be installed.
In order to check if these schema objects are in your ldap, look at the schema for a lot of oblix* object classes and ob* attributes - if they are there then the schema has been added. OAM only supports OVD as the User ldap store, not the configuration store. When you first install an Identity Server, it is necessary to give OID (in your environment) as the configuration store, and the installation will usie the OID_oblix_schema_add.ldif file to update the OID schema. When you specify the user store as OVD, OAM adds VDE_user_schema_add.ldif to the OVD schema.
I suspect that your schema objects may be fine, but if you want to clean them from your directory you can use the *delete.ldif files supplied (all the ldif files are in identity/oblix/data/common) for the ldap servers, and start again.
Regards,
Colin

Dependency conflicts when installing WebLogic Server Tools in Eclipse Juno

Installing the WebLogic Server Tools in Eclipse (Juno) on Windows 7, 64 bit cannot be completed. Eclipse is up to date and several other plugins are installed.
When installing the server tools, either via the Marketplace or the Server view -> New Server -> Download additional server adapters it fails because of incompatible dependencies. The error message is:
Cannot complete the install because one or more required items could not be found.
Software being installed: Oracle WebLogic Server Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.weblogic.feature.group 2.2.0.201211211917)
Missing requirement: Oracle Eclipse Tools Environment Checker 5.2.0.201211211917 (oracle.eclipse.tools.envcheck 5.2.0.201211211917) requires 'bundle org.eclipse.ui [3.8.0,3.104.0)' but it could not be found
Cannot satisfy dependency:
From: Oracle Common Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.common.feature.group 2.2.0.201211211917)
To: oracle.eclipse.tools.envcheck [5.2.0.201211211917]
Cannot satisfy dependency:
From: Oracle WebLogic Server Tools 2.2.0.201211211917 (oracle.eclipse.tools.juno.weblogic.feature.group 2.2.0.201211211917)
To: oracle.eclipse.tools.juno.common.feature.group 0.0.0
Does anyone know how to solve this and get the WebLogic Server Tools installed?
rob schlüter
Edited by: Rob Schlüter on Mar 11, 2013 3:12 AM

See this thread:
Juno 4.2 SR2 and OEPE
Until the next OEPE release comes out, you need to make sure that you are running with Juno SR1 when installing OEPE. Installing into Juno SR2 will not work.
- Konstantin

Could not resolve service name when installing Mobile Server

Hi,
when installing mobile server I am prompted for the SYSTEM pwd and then get "ORA-12154: Could not resolve service name". I install lite in a different home (LITE_HOME) than the database. Database's TNSNAMES.ORA looks like (I added the webtogo.world entry myself)
===================== TNSNAMES.ORA =================
WEBTOGO.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(Host = localhost)
(Port = 1521)
(CONNECT_DATA = (lite.oracle)))
LITE.PL.ORACLE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = lite.oracle)
=======================================
Then installing lite I enter localhost/1521/lite.oracle
I can connect from sqlplus:
sqlplus system/manager@lite
Java version is 1.3.1_08, which I think is correct.
Does anyone have any ideas? Thanks in advance.
Best regards,
Pawel

Hi,
When you install Oracle Lite the valid TNSNAMES.ora becomes the one that is coming with Oracle Lite.
From now on when you must create a tns name you must create it in the Oracle Lite's tnsnames.ora file unless you specify which tnsnames file you will use in the registry.
You can find tnsnams.ora file in the below path:
<OracleLite_HOME>\network\admin\
Regards,
Bogac OZGEN

Trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

trying to activate serial number after entering redemption code and continues to say invalid serial number. Installing on Server 2012 R2 for client using RDS. HELP.....

Thank you guys for the quick answer! Muche appreciated
I've tried all suggested solutions, but no luck :-(
- tried http://support.microsoft.com/kb/2765260 > no help and by the way the hotfix provided is not applicable for 2012 R2.
also tried "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable -i" and got this :
Microsoft (R) ASP.NET RegIIS version 4.0.30319.33440Administration utility to install and uninstall ASP.NET on the local machine.Copyright (C) Microsoft Corporation. All rights reserved.Start installing ASP.NET (4.0.30319.33440).This option is not supported on this version of the operating system. Administrators should instead install/uninstall ASP.NET 4.5 with IIS8 using the "Turn Windows Features On/Off" dialog, the Server Manager management tool, or the dism.exe command line tool. For more details please see http://go.microsoft.com/fwlink/?LinkID=216771.Finished installing ASP.NET (4.0.30319.33440).
http://social.technet.microsoft.com/wiki/contents/articles/14582.sharepoint-2013-install-prerequisites-offline-or-manually-on-windows-server-2012-a-comprehensive-guide.aspx
> is not for 2012 R2.
For the automated install script (http://gallery.technet.microsoft.com/office/DownloadInstall-SharePoint-e6df9eb8) Craig mentions that the script are not yet compatible
"SharePoint 2013 SP1 and Windows Server 2012 R2 support coming soon
I will be updating this script with support for SharePoint 2013 Service Pack 1 installations along with support for Windows Server 2012 R2 in the near future. Thank you to everyone for the interest in my scripts - it is much appreciated! "

When installing SQL Server is there a benefit to overriding the defaults for the Shared Feature Directory?

When installing SQL Server under feature selection you are given the option to change the Shared feature directories. When you choose to change from the default OS drive it seems that the installation
process still installs a large amount of files on the OS drive and then additional files under a similar drive structure on the alternative drive. Is there any real benefit to changing the default location?
Additional is there benefit to changing the default location for the installed features, database engine etc. We are trying to create some clean templates that we can bring up in our production
environment so we are provisioning separate drives for data, logs, backups, tempdbs but as we use the prepare image it seems like splitting the installation of sql server into two separate locations to safe minimally on file space seems counterproductive.
I have searched for best practices and this area seems glossed over in most articles, I found a few that indicate later installation of features on a machine that use a non-standard shared component
drive has caused issues. I would like to know there are benefits to taking such actions.
Thanks in advance,
Dirk

Hello,
The best reason I can think about installing SQL Server binaries on another drive different than the system drive is the
fact the page file (pagefile.sys) is located on the system drive by default. The more I/O I can prevent happening on that drive the better for the performance of operating system.
SQL Server still installs some binaries on the system drive anyway, and creating a partition for SQL Server binaries alone
may seem like a waste.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

RollbackCleanup error when installing the server on bekup base

Hi,
1.
System SCSM2012R2, WinServer2012R2, SQLServer2012R2
On the new machine installed sql server
and restored from a backup database
ServiceManager_58sd00 (on the old machine called
ServiceManager_58sd01).
Perform a server installation SCSM2012
on this base. At the stage of
"final" after a long pause
an error RollbackCleanup and rolls back the installation.
LOG: http://1drv.ms/1mq8K0C
2.
How critical exhibit
in the sorting when you install SQL Server
encoding Cyrilic_General _100_CI_AS?
Before that, I always left the default value
and did not notice any problems.

In regards to #1: is this a datawarehouse server? i'm seeing the following errors in your setup:
Action start 11:51:44: _SetSRSProperties.1CA03A32_06E0_4726_8E63_FEA4484D9D6F. CAPACK: Extracting custom action to temporary directory: C:\Windows\Installer\MSIEE84.tmp-\ CAPACK: Binding to CLR version v2.0.50727 MSI (s) (CC!4C) [11:51:44:838]:
PROPERTY CHANGE: Adding SRSPropertiesFailed property. Its value is '0'. Calling custom action ReportingCAManaged!Microsoft.Reporting.Setup.ReportingManagedCAs.SetSRSPropertiesCA SetSRSPropertiesCA: Rosetta Server is: \MSSQLSERVER. MSI (s) (CC!4C) [11:51:44:911]:
PROPERTY CHANGE: Modifying SRSPropertiesFailed property. Its current value is '0'. Its new value: '1'. SetSRSPropertiesCA error: Invalid parameter . StackTrace: at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementPath.CreateWbemPath(String
path) at System.Management.ManagementPath..ctor(String path) at System.Management.ManagementScope..ctor(String path, ConnectionOptions options) at Microsoft.SystemCenter.Setup.SQLUtils.GetSRSWMIScope(String computerName, String instanceName, String srsClass)
at Microsoft.SystemCenter.Setup.SQLUtils.GetSRSWMIInstance(String sqlSRSServer, String srsServerVersion, String srsClass) at Microsoft.Reporting.Setup.ReportingManagedCAs.SetSRSPropertiesCA(Session session)
which looks like a SQL SSRS adjustment error due to WMI or authentication issues.
however, this seems to be the core issue:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.WaitForSDKServiceStart WaitForSDKServiceStart:Entering WaitForSDKServiceStart:Sleeping for SDK to start 0 seconds WaitForSDKServiceStart:Sleeping for SDK to start 10 seconds WaitForSDKServiceStart:Sleeping
for SDK to start 20 seconds WaitForSDKServiceStart:Sleeping for SDK to start 30 seconds WaitForSDKServiceStart:Sleeping for SDK to start 40 seconds WaitForSDKServiceStart:Sleeping for SDK to start 50 seconds WaitForSDKServiceStart:Sleeping for SDK to start
60 seconds WaitForSDKServiceStart:Sleeping for SDK to start 70 seconds WaitForSDKServiceStart:Sleeping for SDK to start 80 seconds WaitForSDKServiceStart:Sleeping for SDK to start 90 seconds WaitForSDKServiceStart:Sleeping for SDK to start 100 seconds WaitForSDKServiceStart:Sleeping
for SDK to start 110 seconds WaitForSDKServiceStart:Sleeping for SDK to start 120 seconds WaitForSDKServiceStart:Sleeping for SDK to start 130 seconds WaitForSDKServiceStart:Sleeping for SDK to start 140 seconds WaitForSDKServiceStart:Sleeping for SDK to start
150 seconds WaitForSDKServiceStart:Sleeping for SDK to start 160 seconds WaitForSDKServiceStart:Sleeping for SDK to start 170 seconds WaitForSDKServiceStart: SDK Service connect error, after 3 mins, fail this function MSI (s) (CC:AC) [11:59:14:603]: NOTE:
custom action _WaitForSDKServiceStart unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle. CustomAction _WaitForSDKServiceStart returned actual error code 1603 (note this may not
be 100% accurate if translation happened inside sandbox)
it's waiting for the service to start, and it gives up after 3 minutes. i would repeat the process, and watch the "System Center" services in event viewer and services and see if you can see why it's failing to start.
in regards to #2: you want to look to
the standards on the language. it looks like that collation is supported. i don't think this is a critical, even if it wasn't, but i work in latin english almost exclusively, so i'm not really qualified to comment here.

"Invalid serial number" when installing Toshiba utilities on NB200-13J

This model (13J) is the government-sponsored student edition used by thousands of Greek pupils and is not listed in the Support downloads.
I made a new partition and installed XP SP3 Pro, in addition to the standard XP Home. I downloaded all the drivers for the model number printed on the sticker (PLL25E-00401WMG, which I assume corresponds to NB200-122 in the Driver Downloads).
Most of the important Toshiba utilities (Hardware Setup, Hotkey, Value Added Logical Device) terminate with the error "Wrong serial number".
Given that the Toshiba utilities work fine in the standard (old) installation,
1. Is there a way to bypass the serial number checking for the installation of Toshiba utilities?
2. Are there specific Toshiba downloads for NB200-13J ?

I apologise for the long post, but I am afraid that sooner or later other users of NB200 will (stumble on the same issues.)
Dear Timox, thank you for this interesting scenario, and let me offer my first thoughts. I have already seen this theme of installation sequencing in the forums, and my sequence was about the same - first non-Toshiba stuff and then Toshiba stuff.
You and other forum members say that the order is "very important" and of course I'd like to know *why* the order is important. A possible answer would be that each utility expects something else already having been installed. If this was the case, i.e. that users should follow a linear sequence of installation, wouldn't it be very easy for the developers to embed error messages in each utility like "please install utility X first and retry installation"?. In the same line of thought, developers could have bundled everything in one big executable and offer it for use in clean installation scenarios. If the "why" of the specific sequence is not stated explicitly, the "importance" of installation sequence still remains in the realm of magic.
Having said all that, I deleted the windows installation and started anew.
Non-Toshiba stuff in the beginning of your list were ok (I do them the same way for some 15 years now).
ConfigFree was the first in your list to misbehave, issuing the infamous in these forums message "This program only works on a Toshiba System". When I saw this I knew I was doomed. This error a1lone is sufficient for me to claim that the "importance of installation order" is a myth, and that this and the other Toshiba utilities listed below do not recognise my machine.
Here are my results:
TOSHIBA Configfree - This program only works on a Toshiba System
On reboot, and on any reboot, Configfree presents the same message.
TOSHIBA Hotkey - The serial number is invalid.
TOSHIBA Hardware setup - The serial number is invalid.
Toshiba Zooming utility - OK
Toshiba Zooming utility driver - OK
TOSHIBA Password Utility - The serial number is invalid
Toshiba Fn-esse - OK
TOSHIBA Accessibility - The serial number is invalid
TOSHIBA Touchpad On_Off - The serial number is invalid
TOSHIBA Power Saver - OK
TOSHIBA Power Saver Driver - OK
On reboot (and in all subsequent reboots) I get
"A fatal error has occurred. The program has terminated. code: 0x47F
PC Diagnostics - OK
Running PCDiag gives the following:
Model Name: Unknown
Part Number: Unknown
Serial Number: Unknown
Serial Number: Unknown
OS Version: Unknown
BIOS Version: Unknown
Physical Memory: Unknown
Testing CPU and Memory gives PASS results.
SD Memory Utilities - OK
HDD Protection - OK
3G, Driver RF, Wireless manager & Network Device ID Registry Setting Tool - not applicable for NB200-13J
TOSHIBA Value Added Logical device - NOT in your list and from what I read, very vital for NB200, does not install at all, as if the file were damaged. I had to manually decompress setup.exe and run the resulting DPInst.exe, after which TVALD says it installed fine.
This completes the clean installation saga.
Now, checking the Services, only Toshiba Bluetooth is listed.
Checking running processes with Sysinternals Process Explorer, I see the following Toshiba-related running processes:
CFSvcs - Service of Configfree (supposedly "only working for Toshiba systems" and not mine!!!)
ThpSrv.exe - TOSHIBA HDD Protection Service
TosBtSrv.exe - TOSHIBA Bluetooth Service
ZoomingHook.exe - TOSHIBA Zooming utility Hotkey Hook
Smoothview.exe - Smoothview (by TOSHIBA)
TosBTMng.exe and under it another 6 Bluetooth-related processes
_Preliminary conclusions and alternative theories:_
1. My windows may be missing some service(s), prerequisite for the Toshiba utilities, or there is a specific mandatory locale/configuration to be used when installing them, or MSDN OSs are not compatible, etc etc XP-related dark matter.
2. NB200-13J is not compatible with the utilities.
3. My EEPROM contents were somehow corrupt (from what I read many Tosh laptops suffer from this) and I need to reprogram them with the DMI Update Utility (see e.g. http://forums.laptopvideo2go.com/topic/7011-toshiba-notebook-dmi-updates-for-wrong-error-message/) or with special startup disks (from what I read, not yet issued for the NB200 series)
4. I am missing a non-public Toshiba utility/driver, provided only to major vendors (and not to end customers) in order to customise their windows pre-installations.
5. Some conspiracy theory, like the one saying that Toshiba Corporation succumbs to pressures from Microsoft Corporation to poison or kill XP in laptops/netbooks (...)
6. I am using the wrong fairy stardust.
_Next step_: I'll compare the services and processes running on the original windows with the ones on the clean installation and see what is missing.
In the meantime, any more ideas would be greatly appreciated... (to be continued!)

Error Calculating InstanceID when installing SQL Server 2012 SP1 on Windows 7 Home Premium SP1

Hello...
I know this issue has been on several tickets but I have not been able to find a satisfactory solution. I am receiving error 0x85640001 "...error calculating instanceid" when I attempt to install SQL Server 2012 Developer Edition DVD.
I have downloaded the ISO for the enterprise evaluation product and tried burning it to a DVD-RW and decompressing the ISO to my desktop for installation without success.
The log files do state the setup process runs into a badimageformat exception.
I had SQL Server 2008 Developer edition installed on this laptop, but I have completely removed all prior SQL Server instances (using the uninstall wizard in Control Panel).
Please let me know what you suggest to correct this problem.
Thank you for your help!

Hello,
1. Uninstall any SQL Server 2012 component using Control Panel.
2. Download the Evalaution Edition from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=29066
3.Perform an edition upgrade from evaluation edition to developer edition using the current media.
http://technet.microsoft.com/en-us/library/cc707783(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error received when installing SQL Server 2008 R2 Express

I receive the following error when I try to install SQL Server 2008 R2 Express-
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\rhaas\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
   at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
   at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
   at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
   --- End of inner exception stack trace ---
   at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
   at System.Configuration.ConfigurationManager.GetSection(String sectionName)
   at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
   at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
   at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
   at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
   at System.Configuration.SettingsBase.get_Item(String propertyName)
   at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
   at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
   at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
   at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
LandingPage
    Assembly Version: 10.0.0.0
    Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
    CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/LandingPage.exe
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.SqlServer.Configuration.Sco
    Assembly Version: 10.0.0.0
    Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
    CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Configuration.Sco.DLL
Microsoft.SqlServer.Chainer.Infrastructure
    Assembly Version: 10.0.0.0
    Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
    CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Accessibility
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.Management.Controls
    Assembly Version: 10.0.0.0
    Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
    CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
    CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Does anyone have any ideas on how to proceed? Installing will not complete.

Hi Balmukund!
Thanks for your help. I did rename both folders to a generic name (rename_folder_1 & rename_folder_2) and the install failed again. Did I rename the folders in a correct manner? Below is a copy of the user.config file referenced in
your post above. Any additional direction would be very helpful.
Thanks!
<?xml version="1.0" encoding="utf-8"?>
<configuration>
    <configSections>
        <sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
            <section name="Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
allowExeDefinition="MachineToLocalUser" requirePermission="false" />
        </sectionGroup>
    </configSections>
    <userSettings>
        <Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
            <setting name="WindowPlacement" serializeAs="Xml">
                <value>
                    <WINDOWPLACEMENT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
                        xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                        <showCmd>3</showCmd>
                        <ptMinPosition>
                            <x>-1</x>
                            <y>-1</y>
                        </ptMinPosition>
                        <ptMaxPosition>
                            <x>-1</x>
                            <y>-1</y>
                        </ptMaxPosition>
                        <rcNormalPosition>
                            <left>0</left>
                            <top>0</top>
                            <right>800</right>
                            <bottom>600</bottom>
                        </rcNormalPosition>
                    </WINDOWPLACEMENT>
                </value>
            </setting>
        </Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
    </userSettings>
</configuration>

Error when installing SQL Server 2008 R2 after downloading

Hi -I hope somebody can help me.
I have tried to install nopCommerce with no luck. I am not able to establish the SQL database. I have tried to solve the problem for a very long time, also with no luck. Now I think it has to do with an error that come when I installed the SQL Server 2008
R2.
I have tried to load a picture here, but was denied.
with hopes for help
Regards Egil Ryengen
The error text is as followed:
Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co

Unhandled exception has occured in your application. If you click Continue, the application will ignore this error and attempt to continue. You click Quit, the application will close immediately.
An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer/Configuration/LandingPage/Properties.Settings: not load file or assambly "System, Version =4.0.0.0,
Culture=neutral. Public Key Token=b77a5c561934e089" or one of its dependencies. The system cannot find the file specified.
(C:/Users/EgilRyengen/AppData/Local/Microsoft_Corporation/LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx/10.0.0.0/user.co
Did you read hardware and software requirements before installing SQL Server 2008 R2. I guess you are missing .Net framework. AS per
This Doc
You need to download and install .Net framework 3.5 SP1 and requirement is more if you are installing express edition. Its all mentioned in link
You can also refer to
this Thread it has same issue as you are having
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Error: "PackageFromTheweb" when install SQL Server 2000 cluster

Hi,
I am trying to setup a WAS 6.40 system. When I am installing SQL Server 2000 on cluster, I got following error: "This program is used internally by PackageFromTheWeb. It should not be executed directly." Our OS is Windows 2003 Enterprise SP2. Search on the internet many have the same problem but seems no answers. We even completed rebuild OS and install again got the same error message. Very frustration! Realizing the installation has NOT even get to SAP part yet, but any of you see this kind error message when you install SQL Server? How do you fix it?
Any helpful anwsers are appreciated and reward points.
Thanks,
Yujun Ran
Edited by: Yujun Ran on Mar 18, 2008 3:53 PM

Suhas,
Not sure I understand what you are asking. But to answer your question, No, I did not install any software on my desktop. I am logon to the server remotely to install SQL Server 2000.
Thanks,
Yujun Ran

Error when installing ides server

Dear all,
When i am try to installing IDES server an applying jce policy it shows following error msg
ERROR 2003-05-09 23:11:10
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kpdruyvr' does not exist on the 'localhost' host.
ERROR 2003-05-09 23:11:10
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
Pls. help,
Regards,
Madhu.

> When i am try to installing IDES server an applying jce policy it shows following error msg
>
> ERROR 2003-05-09 23:11:10
> MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kpdruyvr' does not exist on the 'localhost' host.
Please read the installation guide - "localhost" is not a valid hostname for a SAP system.
Markus

Error 49: LDAP Invalid credential Supplied when installing Identity Server

Similar Messages

Maybe you are looking for