Error 49 on Laserjet M1522nf

The printer copies and prints ok but when I press the Start Fax button I get the Error 49 message, I updated the firmware but the issue still there. I'm told the formatter board has more than likely failed and it's out of warranty so I have to pay to get it repaired. Has anyone had this same issue and managed to get it repaired for free, as I had a similar problem with a P2015 laser printer and it was fixed for free out of warranty.
This question was solved.
View Solution.

There is something that you can do but it will delete all your current settings which include fax numbers, names, stored fax, etc. You need to perform a restore factory defaults.
On the control panel press Setup>Services>OK>Restore defaults>OK
Regards,
affableLJ
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I am an HP employee!

Similar Messages

Error Message: Install Black Cartridge on LaserJet M1522nf

Hello:
I have a LaserJet M1522nf and am getting an error message stating "Install black cartridge", even though I have installed a new cartridge. I have tried 3 different new cartridges and still get the same error.
I am currently using this printer on a Windows Vista Home Basic computer.
The current cartridge I am trying is a LD Products CB436A.
This has been going on for months and we're using it as part of our office system. Each day this gets at me and I'm about to buy an alternate brand printer if I can't get this solved.
I greatly appreciate your help!
This question was solved.
View Solution.

I had this problem too - Here's what I found on the HP trouble-shooting/error message site. The bold italics I added, that was my problem:
"Install black cartridge" No cartridge installed with door closed.
If the paper tray has been overfilled, it can lift the toner cartridge up from its seated position, resulting in the cartridge not being detected by the MFP.
Remove the toner cartridge.
Remove all paper from the bottom tray.
Check for any paper jam and, if found, clear it.
Power cycle the printer (turn it off and then back on).
Reinstall the toner cartridge, being careful to make sure it is seated properly in the MFP.
Reload paper in the bottom tray; be careful not to overfill the tray.

HP Laserjet M1522nf Won't Scan

Info: HP Laserjet M1522nf, Windows 8.1 Laptop, Connected through USB
Hey guys,
I recently got a new laptop windows 8.1. I connected and then downloaded and installed the driver and everything went smoothly. Printing to the printer works fine however everytime I try and scan something I get the error message "A problem prevented the document from being scanned. Please try again or for troubleshooting information, see Help and Support or the information that came with the scanner". The printer makes all the noise and I see the progress bar of the scan moving however everytime at the end I get the error message. I've tried running the scans through different applications such as gallery, running "Windows Fax and Scan" as Admin and stopping the and restarting Windows imaging. None have worked so far. I tried doing a preview of the scan and the printer makes all the right noises and I even see the preview of the document within the program, however get a slightly different error message, ""An error occurred while setting scanner properties. If another program is scanning, please wait for it to complete and try again". If I try to scan after that preview I get the previous error message about "a problem." I tried unplugging, restarting the laptop and printer to no aval. Please let me know of any possible solutions, thanks.
Sam

Hi Sam (SamK24),
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this by clicking the following link: Printers - LaserJet.
Hope this helps, have a good one!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Can I make my HP laserjet m1522nf mfp printing wirelessly?

I have this non-wireless hp laserjet m1522nf mfp printer at home. I have two laptops and am using FiOS wireless router for wireless internet access. I also have a Rosewill wireless router. It is not a printer server, just a regular wireless router. Now I use an enthernet cable connecting printer to Rosewill wireless router. Can I print from my laptops? If yes, how can I set it up?
I know I can either buy a wireless printer server, or a wireless adaptor or use one of the laptop as printer server to make this work. But I want to try laptop + Rosewill wireless router + HP printer route.
Thanks in advance,
-J. Z.

Hi,
Based on its specs, it has:
Connectivity, standard
10/100Base-T Ethernet network port, Hi-Speed USB 2.0 compatible port.
Connectivity, optional
None
You may be able to connect it to a wireless rounter and config it on the same wireless network then you can print wirelessly.
Please use the following book (page #13) to set it up.
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

I have laserjet m1522nf but it is not working with autocad 2014

i have laserjet m1522nf printer when give plot (print command) from Autocad 2014 to printer, auto cad stop woking we check with other printer it is working fine
This question was solved.
View Solution.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I have provided the HP LaserJet M1522 Multifunction Printer series Support page.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unsupported black in use error message for laserjet p2055

Receiving "unsupported black in use" error message for laserjet p2055. I replace the cartridge with a new one and the same message appears. Any suggestions how to resolve this issue?

Hi,
Does it become active if you go to System Preferences > Accounts and Click on the current Account Pic and attempt to take a Pic ? (you do not have to Set it as the Pic)
Go to System Preferences > Accounts
Click on Your Account (in the list on the Left)
The Right hand side will now show some options.
Clicking the current Pic will give you access to Edit Pic
One of the Options then is to take a Snapshot.
Take a Snap Shot but you do not have to "Set" the Pic.
This process will invoke VDCAssistant.
Explain further about the PRAM Reset please.
You should shut down the computer (Rather than trying to catch the Restart)
You should then Start the Computer holding down the AppleALT+PR keys and keep holding them until you hear three Start Up0 Bongs (Chimes)
This deletes some settings such as System Preferences Settings for the Volume (Sound) and Date and Time that may need resetting afterwards. (Others may also be effected such as Screen Saver)
On Spotlight.
This does not look or report on certain Folders.
At the Hard Drive Level this is Library and Syatem
In your Home Folder (Little House icon) it will not look in your Library.
com.ecam.iusbcam.plist and com.apple.ichat.plist
Are in your Home Folder/Library/Preferences
The Others are in the /Library at Hard Drive Level
7:15 PM Wednesday; June 3, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Hp laserjet m1522nf "install black cartridge"

My fax/printer (HP LaserJet M1522nf) is still insisting that it needs a black ink cartridge. I JUST INSTALLED A BRAND NEW CARTRIDGE AND IT STILL SAYS TO INSTALL A BLACK INK CARTRIDGE AND WON'T PRINT A THING. I'm very frustrated, I was behind in my work to begin with. I have reset the machine multiple times. Pulled the cartridge out and stuck it back in. Help.
Joey
This question was solved.
View Solution.

Have you tried removing all the paper from the bottom tray and then installing the cartridge?
Checked for any paper jams?
Re-install the old cartridge?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Cannot add printer- get error message. LaserJet 1200

I recently bought a dual powered MacBook. It was working perfectly, and finding my printer both attached by USB, and wirelessly. It shows up as Bonjour LaserJet 1200. Suddenly, it stopped working, and cannot be added to the printer list. I get an error message,"client error message too long", or some other nonsense. I have several other computers, running OS X, and none of them have any problem sharing the printer, which is connected to an Airport Extreme remote base station. I have tried everything, and come up with no success. So eventhough the printer is recognized, with its address, and is sharable, it suddenly and without cause, cannot be added to the printer list, and thus I cannot print. Any suggestions. Peter
Recent Dual MacBook Mac OS X (10.4.8)

I did. before and I did again. and then uploaded and installed new software and STILL get error 1282. the hp people told me there is nothing they can do it's an apple problem. I'm stumped. If you can think of anything else would appreciate it.

Printer error with HP Laserjet 6L and Windows 7

I have an old but still functional HP Laserjet 6L (from the late 1990s), which is connected to a new computer running Windows 7 via USB. Windows 7 found the necessary drivers, but I am having frequent printer errors come up in the Printer queue, and the machine refuses to print. The problem is 'solved' when I restart my PC, and the document then prints. However this is a pain, and I obviously don't want to have to restart every time I want to print.
I would be very grateful for any advice on this. Thanks.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Cannot enable ePrint Web Services - get internet connection error for HP LaserJet 1102W

I have a HP laptop running Windows 7 Professional 64 bit. We just changed over to Comcast internet service from AT&T where my HP LaserJet 1102W was set up for ePrint. After several hours, I was finally able to add the 1102W printer to the Comcast network, access the Embedded Web Server tool and print wirelessly but I cannot set up ePrint. I have deleted the printer but cannot get it to connect to Web Services. I keep on getting: Connection Error. Check Internet Connection but again, I can print wirelessly successfully to the printer but would like to be able to set it back up for ePrint. My Comcast router is an Arris TG862.
I have updated the firmware and used the HP Print and Scan Doctor tool but still am not able to get the ePrint Web Services to connect. Here is the information from the Networking page of the EWS:
IPv4 Configuration
Warning: A change in the IP Address will result in loss of connectivity to the browser.
IP Configured By: DHCP
Host Name: NPIC968F8
Domain Name: hsd1.tn.comcast.net.
IP Address Configuration
X Automatic IP Manual IP
X DHCP
BootP
X AutoIP
Manual IP Address:10.0.0.89
IP Subnet Mask: 255.255.255.0
Manual Default Gateway: 10.0.0.0
DNS Address Configuration
Preferred DNS Address: 75.75.75.75
Alternate DNS Address: 75.75.76.76
WINS Address Configuration
X Automatic WINS Server
Manual WINS Server
Manual Preferred WINS Server: 0.0.0.0
Here is my ipconfig information:
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . : hsd1.tn.comcast.net.
   Description . . . . . . . . . . . : Intel(R) Centrino(R) Wireless-N 1000
   Physical Address. . . . . . . . . : 8C-A9-82-A3-F9-5E
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::c57:eb2b:5144:2ea5%13(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, March 29, 2013 1:24:52 PM
   Lease Expires . . . . . . . . . . : Saturday, April 06, 2013 11:09:24 AM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.1
   DHCPv6 IAID . . . . . . . . . . . : 378317186
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-15-CE-4E-8C-10-1F-74-11-22-71
   DNS Servers . . . . . . . . . . . : 75.75.75.75
                                       75.75.76.76
   NetBIOS over Tcpip. . . . . . . . : Enabled
There appears to be a known issue with the Arris TG862 router and supposedly a new firmware is to be released soon but just checking to see if anyone has been able to resolve this issue.
Thank you!

Hi Surf1981,
I understand that you're not able to enable web services on your printer. I would try steps listed below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Paper tray error message HP LaserJet 1102w

Recently my LaserJet 1102w stopped printing duplex; instead, after printing the first side it gives an error message : Paper tray needs to be filled.
The paper tray is full, but I cannot get it to continue printing the other side, no matter what. This has become a huge problem, even when printing single-sided jobs.
Any ideas?
This question was solved.
View Solution.

Hi,
Once you place the printed pages back in the input tray, try opening and closing the top cartridge access door to rsume the print job and check if that prints the other side.
Hope that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Print error on HP LaserJet 4 Plus

     I have a Macbook Air, Mac OS X 10.6.8 and have installed my old trusty Laserjet 4 Plus printer. It printed once, then gave me an error, "W2 INVALID PERS"
and won't print again. I am told I do not need to download another driver, the Air has what is necessary
     I have tried the Generic PCL Laser printer driver as well as the HP driver and neither work. I looked on the HP site and there is nothing available for this printer, only the Laserjet 4 Plus "M"
     I am using a USB to Parallel cable. In the printer queue everything seems to go to 4% then stop sending.
Even though all the sites say this will work with the Air, could it be that there is not enough Ram (or something) to make it work?
I am sooooo frustrated! It is an old printer but works fabulously for what I need AND I have lots of cartridges for it!
Any ideas would be appreciated!
   Thank you,
PS...if there is no hope, can you recommend a printer that doesn't gobble up ink?

"W2 INVALID PERS" translates to 'Invalid Personality' - it occurs when you're trying to send a PostScript-formatted print file to an HP printer than only recognizes HP-PCL.
http://h30499.www3.hp.com/t5/Printers-LaserJet/LaserJet-4P-Message-quot-W2-Inval id-Pers-quot/td-p/962261

Error with HP LaserJet Professional M1212nf print driver on Windows 2008 (32bits) Terminal Server

We got a lot of LaserJet m1212nf printers, installed the SAME driver version on server and desktops and nothing is printed using Easy Print. No errors, no messages but nothing is printed, only when a test page is printed the server show an alert: "No test page can be printed".
After that we try to use the HP driver instead of the TS Easy Print, forcing the group policy to use the Hp driver first. But the terminal server always use the Easy Print driver so we are in the same way.
So we try another thing... THE XPS DRIVER... but it doesn't works on the desktop PC, we try to print a test page from the printer desktop properties but "No test page can be printed" is shown... my god!!!
WHAT CAN WE DO??
This question was solved.
View Solution.

Hello,
Thanks for the post. I've included a couple of links below, one to a document and one to a software download. Hopefully between these two we should be able to get this installed and get you up and running. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01998962&cc=us&dlc=en&lc=en&product=3965849&tmp...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-81123-2&cc=us&dlc=en&lc=en&...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Error printing on laserjet 5p

In trying to print anything to my HP Laserjet 5P printer, I get an error-printing message noting there are documents in the queue preventing me from printing. However I get the same message even after I cancel ALL documents in the queue.
I can also successfully print a test page; so I believe the printer is functioning.
I have re-added the printer, re-added the driver software, and still get the same error message no matter what I send to the printer. By the way I'm using Windows 7.
Yet when I troubleshoot the printer (attached to my laptop via a USB port (LPT1) it says it can't find a problem.
Can anyone help? I'm befuddled as to what to do next to resolve this just occurring issue.
Any assistance would be greatly appreciated. Thank You.
[edited email by moderator]

Hello,
Just to clarify you said that the printer is connected to your computer through a USB cable? The reason I ask is that printer if I remember correctly can only support a parallel cable connection, so that might be the issue.
Thanks!!
I work for HP, However, I am speaking for myself and not for HP

Error 49 on Laserjet M1522nf

Similar Messages

Maybe you are looking for