Error -49 when sending emailer using SBOMailer

The SMTP server is a Lotus Notes server that does not require authentication, but the event viewer gives the error -49.
What can be?
Thanks

Hi,
That may be more than one reason,so i suggest you to check these notes:[782611|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000782611],[693007|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000693007],[693306|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000693306]
NB:Need valid s-user id for portal access

Similar Messages

  • Why am I getting syntax error messages when sending emails thru MS Office:MAC 2011?

    Why am I getting suntax error messages when sending emails thru my outlook on my MacPro?

    What are the exact and complete error messages?

  • Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.

    Hi,
    Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.
    Please advise if this is a known problem, and what is the fix.
    Many thanks
    Mark

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • "An error occurred when sending email"  Reader XI  PDF  W7  Outlook 2010

    "An error occurred when sending email" Reader XI  PDF W7 Outlook 2010

    To bypass client-side email software the submit button should point to a server-side script such as PHP or ASP.net.
    For more information and examples visit the following website:
    http://www.pdfemail.net/examples/

  • Javascript error when send email using webmail

    Dear Sun,
    One of our user encounter javascript error when try sending email using webmail below is the error message:
    " +https://webmail.ubd.edu.bn/uwc/webmail/comp_fs_lr.html&rev=3&security=false&lang=en&popupLevel=undefined&cal=1&charset=escaped_unicode, Line 1755+
    +Permission denied+
    "

    Hi Shane,
    below is the answer you need
    What browser is the user using?
    => Firefox and IE
    What browsers have you tested where it doesn't occur?
    =>I tested all the browser (firefox,IE, chrome) it doesn't happen to me
    When did this problem first start?
    =>After the user finish compiled his message and click send
    What is the exact version of UWC you are running (./showrev -p | grep uwc)
    =>Patch: 122793-26 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Patch: 122793-29 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Patch: 122793-31 Obsoletes: 118540-43, 117287-99, 117819-13, 119156-07 Requires: Incompatibles: 118042-22, 126233-04 Packages: SUNWuwc
    Does this error occur all the time? Does it occur for every user, or some users or just one user?
    => Not all the time, so far i just receive one complaint .

  • Getting an error message when sending emails on my 4s iphone?

    just got my Iphone , but getting an error when sending emails...can anyone help

    What error message are you getting when try to send out emails and what type of email account is it?

  • SMPT server does not recognized when send email use POP3

    I can not send email from outlook on Mac Pro - I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?
    it notice show as bellow
    Error - Through this server
    Can not send email. The SMTP server does not recognize any of the authentication methods supported by outlook. Try change your SMTP.... I use the same server for incoming and out going, incoming email well receive but not outgoing and one can help ?

    The problem is probably the wrong host name. If you have an MSN account the outgoing server may be different than it is for Hotmail. If you log in to your web mail account and go to the Support page you should be able to find instructions to set up POP3 mail. In those instructions should be the host name, port, and any other settings you need.
    Usually you just enter the first part of your email address as the user name, but you should be able to confirm this in the POP3 setup instructions. If the user name alone doesn't work then try the full email address. Also, if you have a login name to MSN that is different from your email address you can try that also.
    Regarding the "<hostname>:25" entry, many people have found that email sends faster if you specify the port number; if you don't, the iPhone tries all possible ports which can take several minutes. This isn't your problem, but it is good practice to specify the port number. In versions before 1.1.1 the only way to do this was to put the port number after the host name, separated by a colon. In 1.1.1 there is a separate field for in in the Advanced settings.
    It would be helpful to know the error message you are getting when you try to send. That will determine whether the iPhone is not finding the server, or is finding it but the send is being rejected by the server.
    Keep at it; there is a way to get it to work.

  • Error Attachment when sending email in Hotmail

    I have Safari 5.0.3 and using Hotmail.  Unable to insert attachment and error "This file couldn't be added because it appears to be empty (0 bytes)" appears.  Attachment is in Word.doc format.  Have saved as "PDF" and still same problem appears.  Can someone please help.

    5.0.3 is an oudated version of Safari.
    Try updating your software.  Install Safari 5.0.6 for Leopard
    Then restart your Mac, launch Safari.
    Go to Safari > Preferences then select the Security tab. Click Show Cookies
    Type Microsoft in the search field top right corner of that window then click Remove All > Done
    Now type Hotmail in and do the same thing.
    Now go to the Safari menu bar click Safari > Empty Cache
    Back to the menu again, click Safari > Reset Safari
    Select the top 7 boxes, click Reset.
    Try an attachment sending email in your Hotmail account.

  • PDF file error when sending email using adobe reader

    We have this error when we send the PDF File through the Adobe reader application
    I set the default email as outlook, and outlook is working.
    Can someone help me on this issue please?
    User is using Adobe reader XI
    Thanks.

    Sorry you never received a reply on your original post.
    I am assuming that you are on Windows.  What is your Reader XI version?  What is your Outlook version?
    Just to make 100% sure, this is your setting in Adobe Reader:

  • Error message when sending email from bb: BEGINETP 215

    when i send an email from my bb device, I get the following error. It only happens with a few email addresses; others go through fine from my bb. When I send an email to the address from my computer it goes through no problem
    Subject: RIM_bca28a80-e9c0-11d1-87fe-00600811c6a2
    This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
    BEGINETP 215
    AR0ZrgkAAAAAIBAIMjAzNUMwMzMgFGtjcm93QGxuYmNhcGl0YWwuY29tAFdDkHJQBUNNSU1F
    A0CAgICBGgAAMDlFNzc0ODJFK0crMQC4AVKlQlS3nBho4LaXXn5FABkqLTzv/krP+Pl08kMg
    owIelE2J+TqGam/4uXw/uSl+o3MRKgxTJ1lO/On0R1wHL8LkOpKGCV5OlsHFN13qfVOZwCMy
    kGgVEkJo6Fq7YIBes5X/QS0Cw3UOeM0hBammZTJC/UjkXy9J2BMxeepMzNRQKrLvbpbH8Ro!
    ENDETP -660889842
    Does anyone know what causes the error and how I can correct it.
    Thanks
    Message Edited by 416corn on 12-09-2008 10:12 PM
    Message Edited by 416corn on 12-09-2008 10:13 PM
    Message Edited by 416corn on 12-09-2008 10:13 PM

    Since Entourage is not an Apple product you should post your question on Microsoft's own forums for Entourage as they are more focused on the issue than a forum for Apple's own Mail application:
    http://www.officeformac.com/ProductForums/Entourage/

  • Not delivered error message when sending photos using messages

    When using messages on iPhone 5 to send photos, I receive a not delivered error but the recipient tells me it has been received. I have tried turning phone off/on, signing out of messages on all devices then signing back in. Still occurring. Any ideas??

    Bump. I have the same problem. Anyone shed some light on this?

  • ERROR 62 WHEN SENDing email

    Hi, I am trying to email a jpg image but I am getting this error. I checked the virus software and turned it off.no help. Well I even simply created a new vi just to email a jpeg image but this did not worked. Restarted the PC not helped either. My ver. is 8.2.1 running on win 7. Visa run-time is 4.5. 
    LabVIEW: The system caused the network connection to be aborted. 
    Thanks 
    Attachments:
    Untitled.png ‏160 KB

    Yes I have tried sending an email without the attachment but I still get an error #7 which is fNotFound.  Also server is ok here is the response I get;
    SERVER: 220 mail.domain.com ESMTP IceWarp 9.1.0; Thu, 06 May 2010 09:46:20 +0300
    CLIENT:   HELO localhost
    SERVER:  250 mail.domain.com Hello localhost [xx.xxx.xx.xxx], pleased to meet you.
    CLIENT:   auth login
    SERVER:  334 VXNlcm5hbWU6
    SERVER:  334 UGFzc3dvcmQ6
    SERVER:  235 2.0.0 Authentication successful
    CLIENT:   MAIL FROM:<[email protected]>
    SERVER:  250 2.1.0 <[email protected]>... Sender ok
    CLIENT:   RCPT TO:<[email protected]>
    SERVER:  250 2.1.5 <[email protected]>... Recipient ok
    I do not understand what is going on...

  • Error message when sending email to 100+ recipients

    I am trying to "reply to all" on an email I got with 103 people on the list. I get an error message that says, "the server did not recognize the following recipients" and lists about 25 recipients. It also says the message will remain in my Outbox until it can be delivered.
    What does this mean and how do I fix it?

    Yes, I was just about to mention the fact that most ISPs limit the number of outgoing eMails, to cut down on SPAMming supposedly, so you figured it out yourself.
    There are pther reports here in the past of the same problem... cure was exactly what you did.

  • I am losing my carriage returns when sending emails. How to keep? uses SMTP Email MIME Text Content-Type.vi

    I am losing my carriage returns when sending emails using the Internet email vi's.
    All carriage returns are stripped out and I get one long word wrapped paragraph.
    I want to avoid html.
    Ideally, using the vi's for rich text would be perfect, but a simple text message with carriage returns and line feeds in any font ok. 
    uses SMTP Email MIME Text Content-Type.vi
    i have tried text/plain, text/html, and mixed yada something

    You need to use Line feed constant and then use concatenate function.See the screen shot.
    Naqqash
    Attachments:
    Using Line feed.png ‏15 KB

  • When sending email to pc users, recipient does not receive text in email?

    Hi
    when sending email using MAIL to pc users from 27" IMAC, recipient receives the email and attachments, but does not receive my note/text in email?
    any ideas?

    If they are using Outlook, that is likely the problem.
    There are two settings in the Edit>Attachments, Always send windows-friendly and attachments at end of message.
    Also, set the message as Plain Text (Format menu).
    Outlook has always been crappy with anything but Exchange email. They haven't fixed it in about ten years, so I wouldn't expect any changes in the future.

Maybe you are looking for

  • How to set the user who can access to repository

    Hi, I know we can create user and group in the tools->security.And if this users is belong to Administrators Group, it can access to RPD and do some modify.. Can we create group or user who can access RPD in some situation(like mentioned in HELP, A c

  • Third Party Subcontracting Process doubt

    Hello all Gurus, I have one doubt regarding the third party subcontracting process. I have created a PO with delivery address as that of SC vendor. Now how to do the GR for components if the SC vendor lets me know that he has received the materials f

  • D 110 PRINTER WEB PAGE PRINT INFO

    Hello to all and Blessings. My question is -- Before HP's software update a few months ago I think, printing web pages included a header with document ID/name and a footer with the web address and date of printing. does anyone else remember this and

  • Pdf files do not open in ibooks

    After downloading a pdf file and tapping the screen, the message "open in ibooks of pdf reader" is used to appear but it does not any more

  • Need to pull the data from one server to another server in SSMS using linked server

    Hi, I have store proc which will take the parameters passed to it and store it in a table in that server. Now, this table data has to be pulled to another server table which is of same structure. But I need to do that in the same store proc which is