Error 4SNS/1/40000001: VPoR-0.021

can i get info the issue on my MacBook Pro MBP81.0047.B27

That is a Voltage/Power buss sensor error.  Bring the MBP in for service.
Ciao.

Similar Messages

  • I run  hard hardware test on my macbook white an found error like this 4SNS/1/40000001:VPOR-0.578 and i replace my new battery but it not charging,help me!!

    i run  hard hardware test on my macbook white an found error like this 4SNS/1/40000001:VPOR-0.578 and i replace my new battery but it not charging,help me!!

    Bring it in for service.  Anytime hardware test detects an error, that's an indication the service department needs to fix it.

  • 4SNS/1/40000001: VPOR-0.970  Which could mean the error?

    4SNS/1/40000001: VPOR-0.970  Which could mean the error?

    Welcome to Apple Support Communities
    Did you run this test with the MacBook Pro plugged to the charger? If not, do that. It looks like the MacBook Pro wasn't plugged to the charger

  • 4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    4SNS/1/40000001: VPOR-0.592  Which could mean the error?

    Indicates a sensor on the logic board has failed. Make an appointment at an Apple store to confirm. You can also try an SMC reset, then run the Apple Hardware test again:
    http://support.apple.com/kb/HT3964

  • 4SNS/1/40000001: VPOR-0.878

    Please, I am new to this site. How can I solve this error message after running the Hardware test: " 4SNS/1/40000001: VPOR-0.878"?

    That error indicates that there is a faulty sensor in your MBP.  You will have to take your MBP to an Apple store genius bar for a repair.
    Ciao.

  • Mac test number 4SNS/1/40000001:VPOR-6.054 anyone shed some light on this?

    Just done a hardware test from my USB stick and this number cam up as a hardware fault found ...4SNS/1/40000001:VPOR-6.054
    MacBook Air late 2010 model A1369 serial number ---------DR1
    Any help in deciphering this would be great
    Kind regards and thanks in advance
    Steve

    Connect its power adapter and run AHT again: Mac notebooks: Apple Hardware Test may report SNS alert when power adapter is not connected

  • Hey! so i was do a AHT on my macbook pro retina and their was a error 4SNS/1/40000001:1DOR-0.000 need help thanks!

    hey! so i was do a AHT on my macbook pro retina and their was a error 4SNS/1/40000001:1DOR-0.000 need help thanks!

    Welcome to Apple Support Communities
    It looks like you ran Apple Hardware Test without plugging the MacBook to the charger. It's normal to see an error if you run Apple Hardware Test without your Mac plugged.
    Plug the MacBook Pro to its charger and run Apple Hardware Test again

  • Hardware error 4SNS/1/40000001 TB0T-9.597 MBP early 2013

    My 15" retina Macbook Pro OSX 10.8.5 suddenly went black - seems as if it is shutting down the screen, including an external monitor connected via mini-display port.  This happened suddenly with no particular reason and repeated in different configurations, on mains and on battery.   I was afraid the graphics hardware had completely quit but it seemed temperature related.  After a few minutes it would start for 2 or 3 minutes then sleep.   Without the fan going on and not particularly hot, it seems to be going into sleep.  Even cool, I had to put it in the freezer to get it to complete a basic hardware test.
    Can anyone help me understand what error 4SNS/1/40000001:TB0T-9.597 means? 
    I suspect it is a temperature sensor?  Is this repairable?  The machine is 14 months old and apple wants over $50 just to talk to me on the phone.  I have tried setting "sleep" to never in the Energy Saver settings, resetting the PRAM etc. It will start in safe mode.  Hopefully I can keep it cool enough to get it through a detailed hardware test and get more information...
    I have 4 different MacBooks and I've never seen this.  Any help would be much appreciated.

    It is a sensor error. It is repairable: make a Genius Appointment and take it in for service. Do this ASAP to prevent damage to the computer.

  • Got error 4sns/1/40000001: TBOT-5.597

    Hi, my 17" mbpro doesn't boot the system after it was shut down by holding a power button to get out of an overload that occured.
    I've got an error 4sns/1/40000001: TBOT-5.597 during express AHT and a 4SNS/1/40000000:TmOP-66.250 through extended one.
    Being here in Moscow (Russia) know nothing to do with it.  Believe your help

    4sns/1/40000001: TBOT could be bad - Hardware trouble.
    I got 4sns/1/40000001: TBOT trouble in test time and tiem aagain.
    BUT
    Brain wave good idea.
    Blow PRAM.
    Worth a try.
    restart
    hold down P and R and Command and Option
    HArdaware test again -
    No more 4sns/1/40000001: TBOT
    all fixed.
    Hope that helps!!

  • HT3964 Hardware test error 4SNS/1/40000001:TN1D--1.000. meaning

    I have some problems with my Mac Book Pro 7.1,
    It freezes after starts up or while functioning and I have to force the shut down.
    I run the Hardware test and it reports the following error 4SNS/1/40000001:TN1D--1.000.
    Could anyone tell me this kind of error what does it mean?
    Thanks,
    Serena.

    Welcome to Apple Support Communities
    This error is showing a problem with the logic board controller sensor. The only thing you can do is to take your computer to an Apple Store or reseller to have the computer repaired. Read > http://reviews.cnet.com/8301-13727_7-57352461-263/how-to-invoke-and-interpret-th e-apple-hardware-tests/
    Did you run Apple Hardware Test with the charger connected? If not, connect it to the charger and run Apple Hardware Test again

  • Noisy fans, AHT error 4SNS/1/40000001:tgod-1.000

    Hello, i run an AHT cause my old imac 24' fans came suddenly noisy. (snow leopard)
    (I previously tried reset PRAM..., shut down/wait/unplug..., check apps proc%) ...
    AHT returns this error : 4SNS/1/40000001:tgod-1.000 What does that mean? What should i do ?
    Thanks for your help !

    Means you have a defective sensor. I think it may be for the optical drive. That's what makes the fans run at top speed. Please make a Genius Appointment and take it in for service.

  • Error 4SNS/1/40000001:VP0R-7.976

    Dear Team, Run the hardware test, detected error 4SNS/1/40000001:VP0R-7.976, please help, what error it is? How to solve the error? currently have problem with built-in camera, saying there is no camera connected. Thank you.

    Take the steps suggested in this article.
    http://support.apple.com/kb/HT2090
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    If this does not help contact Apple.
    Best.

  • Error 4SNS/1/40000001:TsOP-19.562

    what is a hardware error 4SNS/1/40000001:TsOP-19.562?
    Macbook air

    These codes can only be interprted by Apple or Apple Authorized Service Centers.
    "4SNS" indicates problem with sensors.
    Best.

  • Bluetooth failure - hardware error 4SNS/1/40000001:TB1T-0.000

    I was installing updates in my computer and suddenly the bluetooh icon started to fail, I noticed that a red led was on (in the mic input), but after restarting it was off, I tried the hardware test and I got the error 4SNS/1/40000001:TB1T-0.000, so I also tried:
    - Reseting PRAM & NVRAM
    - Reseting SMC
    - Deleting the com file of the bluetooth in the Library folder
    But the hardware error is the same, I also noticed that when I test the stereo sound the left speaker volume is very low.
    My computer is still with guaranty so I'll request the replace of the bluetooth chip and speakers.
    Don't waste your time if you did the hardware test and you receive this error message, none of the soft advices you'll find in this forum will work, just replace.
    What I'd like to know if it is better to send the computer or the replace the chip by myself, I saw some youtube videos and it looks very easy, and honestly I don't like how the technical service treats the computers.
    Thanks in advance for the advice,

    Dear all, after some reboots, and honestly I don´t know which of the previous soft advices was, but my bluetooth is now working.
    Just as a extra comment, the mighty mouse bluetooth is the best i ever had, works for Windows Vista better than in OS X. This genius idea of having the right and left button options in one button is very awesome.
    Apple 1 , Microsoft 0

  • MacBook won't boot after trying to repair with Disk Utility. Cannot boot in Safe Mode. Just powers down after about 5 minutes. Apple Hardware Test says error 4SNS/1/40000001:IG0C-0.265 But I cannot find anything on the net about it. MacBook 4,1 Intel.

    Hello Everyone,
    I am in dire need of assistance I am hoping someone could provide. I have a MacBook 4,1 with Intel Core 2 Duo processor 4GB Ram. It is taking over 10 minutes to boot up past the gray apple screen when I turn it on. First I cleared the PRam (?) then I checked the disk using Disk Utility Verify, and it said the disk needed repairs. So I ran the disk repair and it said it was unable to fix the errors on the HD.
    I did a little research and tried booting into the Single User mode, then running /sbin/fsck -fy. It said that it found errors but could not fix them. I ran it two more times as suggested and got the same result each time. I then tried rebooting and now instead of taking 10 minutes to boot up, it takes about 5 minutes on the gray apple screen and then just turns off. I started in Verbose mode to try to troubleshoot the error and it appears the last thing to come across the screen before power down is a message "Apple Yukon 2: RxRingSize <= 1024....etc".
    I decided next I would run the Apple Hardware Tester. The test came back with an error code "4SNS/1/40000001:IG0C-0.265". I am very good at searching the web but I could not find any errors that had the IG0C or IGOC or any combination at the end, but plenty of 4SNS/1/40000000(1) errors with different endings. From what I can tell people are saying anything with 4SNS/1/4000000 is a logic board failure, but this computer was literally just booting this morning until I did the /sbin/fsck -fy.
    Any suggestions are welcome and appreciated.
    Thank you for your time.

    You've a couple of issues .... when Disk Utility tells you it can't repair a drive, if the error is a soft error, like an invalid tree or node, Disk Warrior (or TechTool Pro) can handle it. However, if Disk Warrior (or TechTool Pro) can't handle it, you can erase and write zero's to the hard drive and restore to it, or you can buy a new hard drive. Sometimes running SMART Utility can provide additional insight into the health of the hard drive. 
    THe 4SNS error is a sensor error.  You could install iStat Pro to see if something is indeed getting too hot or remaining room temp or less.  You may need to take it into an Apple shop so they can use their thermal diagnostics to test and isolate it further.

Maybe you are looking for

  • BI Publisher event trigger and email notification

    How can I event-trigger a BI publisher report, i.e., start the BI publisher report after completion of a ETL job? In addition, after generation of the BI publisher report, how can I send to destinated email addresses? Thanks

  • Recently upgraded to Mavericks and iMovie '13, and suddenly I'm beach balling like mad?

    I upgraded to Mavericks and iMovie '13 recently, and have been working on a video project in iMovie for the last few days. I hadn't been having any issues, but now I'm 'beach-balling' almost constantly, not just in iMovie, but everywhere. Opening a n

  • IPod 1st Generation Touch- System Restore from Recovery Mode

    My iPod Touch 1st Generation worked fine one day and the next day all it would do is disply the little white "Apple" and then go black.  It was fully powered.  I opened my Itunes account and connected the iPod. Nothing.  Then I saw on a previous disc

  • WLC AAA Radius to ISE - Multiple Domains in Single Forrest

    I am currently having a problem configuring AAA for management access to our wireless controllers. Our active directory structure is as below: (note all domains are part of the same forest and full trusts between the domains) Root Domain Americas dom

  • Weblogic Startup ERROR w/ JCE and JDK

    Hi Iam running a WLS5.1 off Solaris 7 with JDK1.3 and JCE1.2.1 installed. When I try to start the WLS with the startWebLogic.sh I get the following error. The WebLogic Server did not start up properly. Exception raised: java.lang.reflect.InvocationTa