Error 5: Access Denied can not start the DHCP Client service on Local Computer.

Ran into this error problem with both the DHCP and BFE service. Neither will start and both give me the same error code 5 access denied.
Found this little nugget below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
Right click and choose Permissions. There should be the following:
System = Full Control
Local Service = Read
Network Service = Read
Local Admin = Full Control
Local Users = Read
Dhcp = Read with special permissions
No problem adding the missing Local Service and Network Service. How does one add Dhcp? Is there a way to create this because under permissions there is no way to add this or search it up. Is there a NetSH reset command that will add this in for me?
The Netlogon service was not running and to get the Netlogon service going I ran NetSH int ip reset and it started to work. The other services were not running either and I was hoping they would after resetting IP
Any ideas on to fix this problem? Also, the user turned off the laptop when it was doing updates. Still I do not think it would have created this headache.
TIA
Spammer Hammer

Hi,
Was your issue resolved?
If no, please reply and tell us the current situation in order to provide further help.
Karen Hu
TechNet Community Support

Similar Messages

  • Windows could not start the DHCP Client service on Local Computer, Error 2

    Hi everyone,
    I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
    service on Local Computer." "Error 2: The system cannot find the file specified.".
    There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
    "sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
    "NET  LOCALGROUP   administrators  "NT Authority\Local Service"   /add"
    "netsh winsock reset catalog"
    I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
    SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

    Hi,
    Did you mean after the restart the sfc /scannow command still could find the corrupted files?
    Have you check this these related registry entries permission for your account?
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
    permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
    permission needed: Full Control, Read
    for more information, read this article:
    Some services do not start in Windows Vista and Windows 7
    https://support.microsoft.com/kb/943996?wa=wsignin1.0
    If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
    Karen Hu
    TechNet Community Support

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

  • TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

    its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

    http://support.apple.com/kb/TS1567

  • Windows could not start the Windows Audio service on Local Computer.

    Hi
    I started my PC today and i didn't have sound... weird
    i'm getting this error when i want to start the Windows Audio service
    "Windows could not start the Windows  Audio service on Local Computer.      
    Error 0x800706cc: The end point is a duplicate."
    HELP PLEASE!!!!!

    Hi,
    Have your gotten any updates installed?
    Regarding to current information, this issue can be caused by corrupted updated files or drivers.
    Please check if there is any update related to audio driver. Can this issue be fixed if you remove such update?
    I also suggest you can try to reinstall Audio driver to check the results.
    Kate Li
    TechNet Community Support

  • Could not start the oracle orcl service on local computer 1053

    I ve oracle 8i with Windows XP ,when I try to start it manually also it show ing the 1053 could not start the oracle orcl service on local computer 1053 what should i do?
    Thanks
    [email protected]

    go to oarcle service
    click the service
    choose logon
    click the boutton
    local system. now try start service

  • Could not start the Oracle Agent service on local computer

    I have Oracle Enterprise 9.2.0.1 on Windows 2000 server,
    When I'm starting the Agent service I get this message:
    "Could not start the OracleOra9201Agent service on local computer.
    The service didn't return an error.This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator."
    Could you please help me to fix this problem? What I should do??

    Are you using DHCP or using static IP address?
    Also search forum , you ight get lots of thread addressing same issue.

  • Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

    Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
    It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming: 
    Windows could not start the FLEXnet Licensing Service service on Local Computer
    Error 1068: The dependency service or group failed to start.
    I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service. 
    Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

    Hi Don1233,
    Please consider seek help at the software vendor side.
    For the services didn't start, follow the suggestions posted by Elton in the thread below:
    https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
    Best regards
    Michael Shao
    TechNet Community Support

  • Error "can not start the configuration in parallel does not correct"

    Hello everybody,
    I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
    Thanks in advance!

    Check this KB
                  1678498  - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

  • HT6117 Error : Can not start the service "Apple Mobile Device"

    I get this error message of Can not start the service "Apple Mobile Device" please verify if you have enough permission to start a service. I have tried reinstalling itunes but could not get rid of the error. I use Win 7 64bit OS. Please help me to resolve the issue
    Thanks
    Venky

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • "Could not start the linksys updater service" error message

    I purchased a WRT160N router and everything worked fine for a while. After a few days, I would lose the wireless connection. I spoke to the geeks at Best Buy, and they said the unit was probably bad, so I exchanged it for a new one.
    Before setting up the new one, I figured I'd uninstall the Linksys EasyLink Advisor software in case the new router had a different version. I then started to install the software. But now the installation fails with error message "Could not start the Linksys Updater Service". I tried manually starting it, but it aborts with an error message "The process terminated unexpectedly" .
    Does anyone have any suggestions what I should do now? 

    Well if you are trying to setup your router using the setup disk, you can exit from the setup and configure all the settings on your Router Manually.
    If your Internet Service Providor is Cable follow this link
    If your Internet Service Providor is DSL follow this link

  • I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem-.thanks

    I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them.  Has anyone had a similar problem….thanks

    If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • HT4623 Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

  • Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Hello I upgraded my iPhone to version 6.1 and the device does Hfalhsl iPhone and it stuck on can not start the iPhone

    Find an answer somewhere else or buy a new phone.
    You can not get help here for a hacked/jailbroken phone.

Maybe you are looking for