Error 5 Missing Host Name - Reimporting PCF Does Not Fix?

I have a virtual machine running Cisco VPN 5.0.02.0090 and apparently corrupted my PCF file last night.
I read up on it and it seems like the easiest fix is to just delete, then reimport another PCF; easy enough. I did this, but still have no hostname. In fact, I have no settings whatsoever when I click "Modify." Could all my versions of this PCF be corrupt, I wondered? I had my business partner send me a fresh definitely working copy. Still no luck.
So I uninstalled and then reinstalled the Cisco VPN; surely that will fix it. Added the PCF again. Still no hostname or anything else.
Just for kicks, I imported another PCF entirely for a company that I don't work for, just to see what happens. And it imports just fine and has all it's information.
So...I had a PCF go bad. When I delete it and bring in a new instance, it too is bad.
What is happening here? How on earth can I fix this?

Are the clients and the server on the same private LAN?
In that case you absolutely want to give your server a static IP address in your LAN environment. That's completely separate and distinct from the public DNS address that you're NATted through.
Open Directory will have all kinds of problems if the IP address of the server changes. This would also hold true for remote clients (assuming you're setting up some kind of port forwarding in your router to let remote clients connect).
So step back a little... give your server a static IP address in your LAN, then replay the setup instructions.

Similar Messages

Network Error []: Cannot Get Host Name when running business rules

Guru's
We are getting the following error intermittently when we are running business rules (Planning Application >>Tools>>Business Rules) or running SmartView refreshes:
Network error []: Cannot Get Host Name
The following is then logged in the Essbase Application logs:
Local/Application/Database/admin@Native Directory/Error(1042022)
Network error []: Cannot Get Host Name.
A quick look at the Essbase Error Messages Doc says it is a network error and we have to consult the network documentation. Unfortunately this is not very descriptive so we logged an SR with Oracle but we don't seem to be getting a resolution.
The environment is 11.1.2.0 and the architecture is as follows:
Server 1 - MS Server 2008 x64:
Planning, Calc Manager, Foundation Services, Framework Web Services, EAS, APS, Web Analysis, FR Web Services
Server 2 - MS Server 2008 x64:
Essbase Server
Server 3 - MS Server 2008 x64:
Framework Services, FR Print Services
We have tried doing the following:
1. Put in the server host names into the hosts file on the Hyperion Servers
2. Applied the following TCP/IP settings on all the Hyperion Servers and one of the user machines as a test:
      - Added a new DWORD Value named TcpTimedWaitDelay and set it to 30.
     - Added a new DWORD Value named MaxUserPort and set it to 65534.
     - Added a new DWORD Value named MaxFreeTcbs and set it to 6250
3. Confirmed that there are no packet drops by monitoring the server NICs so no packet loss could be the cause of this issue
4. The Essbase Config file has the following settings:
NETDELAY 2000
NETRETRYCOUNT 2500
Has anyone come across this issue and if you managed to resolve it, how did you go about it.
Thanx

Hi Rahul
The issue is happening to a number of calcs so it it not one calc specifically. I will ask the functional consultants to enhance the logging in the business rules so that we can see if the issue happens on a specific member\block etc and yes we do use Xrefs
We can run this as a calc in EAS without any issues and it's intermittent because this business rule runs 95% of the time in Planning Application >> Tools >>Business Rules without any issues.
Thanks

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Error:Set by Host Name:CRMDEV;Transaction:R3AS:SMOF_DOWNLOAD

Hi Folks,
I am trying to replicate BP from CRM to R/3.All the Mappings from CRM to R/3 are already maintained.Also I have created the subscriptions and publications for R/3 in Admin Console.All the RFC Connections are working correctly. When I checked the SMQ1 in CRM I got the following error:
Set by Host Name: CRMDEV;Transaction R3AS:Report:SMOF_DOWNLOAD.
Can anyone guide me how to solve this issue?
Thanks.
Sudhan

Hi All,
Solved this issue myself.
Basically no need to worry about this queue message.
1) I done set the filter for EQUIPMENT in t-code R3AC1
2) Customer Relationship Management --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> define default setting for Replication or equipment.
Site name - ERP logical system name
IBase Category - EQ
Obj.Family - 0401
Category ID - MAT_Z401 (Important note is this category is created under R3PRODSTYP hierarchy, under MAT_ category). Equipments in ERP also should create using this Category, then only the equipments will be downloaded)
Delta down load checked
3) Go to R3AS and select load object as EQUIPMENT and start
4) you can see the IBASE in CRM using IB53 or using the webUI search.
Thank you and Regards,
Niranjan

I contiue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing. Please reinstall itunes. Reinstalling itunes does not fix the problems

I continue to get the error message registry settings used by itunes drivers for importing and burning CD's and DVD's are missing. Please reinstall itunes. Reinstalling itunes does not fix the problems

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

"Check Names: Microsoft Outlook does not recognize '1. double click the attachment'" submit error

I have seen this question/issue on multiple forums and nobody seems to have an answer/fix yet. I included an e-mail submit button for my form, and when I practice submitting, everything sends fine. However, if I distribute the form (to allow for tracking, etc.) I get an error pop-up window that reads "Check names" "Microsoft Outlook does not recognize '1. double click the attachment'". What I mostly don't understand is "1. double click the attachment" is part of the directions/content in the e-mail after they actually, successfully submit the form. Why is the content auto-populating as part of the mailing address?? After you "Show More Names" and search for the correct recipient(s), you have the same error pop-up again with the 2nd step that's show in the content of the e-mail: "2. Acrobat will prompt you to select a responses file", until you select the recipients again by clicking "show more names". Then the e-mail populates, with "Completed Form&body=Instructions to add this form to a responses file: [email protected]?subject=Submitting" as a recipient, as well as the 2 recipients you had to search for.
Does anybody know why this happens and how to fix it!?

We are having the same issue of trying to send a Shared Review from Adobe Pro XI and getting a error. We are currently using Outlook 2010. Hope someone from Adobe support can answer this issue and other Shared Review issues that are related in nature.

Error: ORA-16532: Data Guard broker configuration does not exist

Hi there folks. Hope everyone is having a nice weekend.
Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
1. Disable the standby database from within the broker configuration
DGMGRL> disable database MYSTD;
2. Stop the broker on the standby
SQL> alter system set dg_broker_start = FALSE;
3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
4. Restart the broker on the standby
SQL> alter system set dg_broker_start = TRUE
5. From the primary, enable the standby
DGMGRL> enable database MYSTD;
6. Broker configuration files will be created in the new ASM location.
I did so but when I try to enable the Primary back I get this:
Error: ORA-16532: Data Guard broker configuration does not exist
Configuration details cannot be determined by DGMGRL
Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
Thanks for your help.

Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

Logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist

Hi,
Getting following error while trying to connect MySQL server to the MDM Import manager.
logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
i have supplied the following paramter values.
Type : SQL server
Remote System : MDM
DBMS server : localhost
Database Name : testing
user: < MySQL user name>
password : < MySQL password>
pls let me know how can i solve this problem.
thanks

Refer the blog
/people/rupesh.kumar4/blog/2008/08/20/how-to-integrate-mdm-with-mysql-server-50
thanks
Rupesh

OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

Hi,
I have one client and one server. In both hosts I created an OS-user named User1.
The user have been given various role under the prefix SQLServer2005.
The default instance of SQL Server and instance (background-process) of
Analysis Service are also run under User1.
I connected via Management Studio to Analysis Service directly in the
server. I set the permission to access Analysis Service to Everyone.
This means everyone should be able to use Analysis Service. I have set
ODBC data source to the server. Testing was successful.
I created a project to create a cube. The tables are fairly small (total 300 MB, biggest one 290).
On project setting (created at client) I set the server host as
deployment target. I managed to deploy project when all I have are Data
Source and Data Source Views.
But on deployment I always failed. The errors remain the same, begins with
OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
I have tried 4 combinations of Impersonation :
(A) Use a specific username and password
* in which I supply User1 and the password of User1
(B) Use the service account
(C) Use the credentials of the current user
(D) Default
Why is this? The server does certainly exist. I think the error message is wrong.
I have seen 3 posting that seems related. One of them say the solution is giving the right impersonation, but gave no detail. About the privilege, User1 are granted the role of
SQLServer2005MSOLAP. What is the solution?
Thank you,
Bernaridho

I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

ORACLE error 959 encountered ORA-00959: tablespace 'xyz' does not exist

im importing a dump to a newly created BD and im using 11g. I have already tablespaces and user for the dump to be imported.
The problems is, i have a total of 5 tablespaces created, all 4 are working well except the one tablespace and im receiving a 959 error(IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'xyz' does not exist). The log mentions that the tablespace does not exist even if this tablespace exist in the list of tablespace and datafiles created.
Hope you could help me with this. Thanks
Edited by: user8667617 on Feb 18, 2010 11:06 PM

SQL> Select name from v$datafile;
NAME
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSTEM01.DBF
C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSAUX01.DBF
F:\ORC11DBUNDO\UNDOTBS01.DBF
E:\ORC11DBUSER\USERS01.DBF
E:\ORC11DBUSER\INT_TRANSACTIONS_DATA.DBF
E:\ORC11DBUSER\INT_DATA.DBF
E:\ORC11DBUSER\CAS_DATA.DBF
E:\ORC11DBUSER\COS_DATA.DBF
E:\ORC11DBUSER\INT_ONLINE_TRANSACTIONS_DATA.DBF
9 rows selected.
SQL> Select * from v$tablespace;
TS# NAME INC BIG FLA ENC
0 SYSTEM YES NO YES
1 SYSAUX YES NO YES
2 UNDOTBS1 YES NO YES
4 USERS YES NO YES
3 TEMP NO NO YES
6 INT_TRANSACTIONS_DATA YES NO YES
7 INT_DATA YES NO YES
8 CAS_DATA YES NO YES
9 COS_DATA YES NO YES
10 INT_ONLINE_TRANSACTIONS_DATA YES NO YES
10 rows selected.
SQL>
here are the result of my query and it seems that the tablespace is recognized by the DB.
is there still any reason why? also when i try to drop the said tablespace in getting a response of the "tablespace does not exist" but when i try to create the tablespace it says that "ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_TS1) violated"
hope you can help me with this.

I cannot download and use ITunes successfully.MSVCR80.dll is missing. Reinstalling does not fix the problem.

I cannot download and use Itunes successfully. Message MSVCR80.dll is missing. Reinstalling does not fix the problem. I also get a error 7, Windows error 126.
How can I fix this?

Solving MSVCR80 issue and Windows iTunes install issues.

Email (name) keyboard shortcut does not send on my Q10

I'm not sure if anyone has this issue. I use shortcut Email (name) and the Q10 pulls up a Compose screen where I can write a new email, can add Send To, etc., but when I click SEND, it does not send. I notice the Account field is missing my email account. and the SEND button is grey-ed out. but my email account is already set up in the Hub.
Is there something I forgot to set?

I posted a screenshot over at crackberry.com too
http://forums.crackberry.com/blackberry-q10-f272/email-name-keyboard-shortcut-does-not-send-my-q10-8...

Account name "domain/user" does not exist.

Hi All,
I am trying to install netweaver developer studio.The installation stops immediately after starting with the eror message Account name "mydomain/user" does not exist.
Any clue,where/why it is checking my domain and user in the installation.
Thanks
Bikram

My domain/user account (does not exist) was a little more complicated.
I'm trying to install it on a work laptop and here is what I have found out, hopefully it will help others.
The installation process validates the user on the domain. (once I connected to my work network, things started moving forward).
Second issue, was the administrative rights for my username. I had to make sure my user had the rights to install, added that user to the Admin group, and make sure the Admin group wasn't in debug mode. (In my case, it was in debug mode, a remant of the IT organization reinstalling something for me.)
Third issue, was two users were suppose to be created to help administer the J2EE server and during the installation process you will be prompted for two passwords. Please keep in mind, if you are on your work domain and trying to install, the password policy used by the organization are actually upheld. You must create a password that will be accepted by your company. (I didn't realize this until I tried to create the same users outside of the installation and I an error message was returned with more of a description that made sense.)
After all of that, I was able to install SAP Netweaver. Well, at least it said, "Congratulations" and it completed. I've yet to be able to access portal. That is my next bug to tackle.
Michael lee

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other devices.

Just got new air and trying to set up. When I put in my Apple ID and password it comes up with error message 'can't sign in because of server error. Try again signing on.' Trying again does not fix. I know my ID and PW are right as work on other apple devices I have.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
 Cheers, Tom

Error 5 Missing Host Name - Reimporting PCF Does Not Fix?

Similar Messages

Maybe you are looking for