Error 5 on Start up (Windows Error 7) - why and how do I overcome it? Have removed and reloaded several times and also tried repairing, but to no avail.
I am experiencing Error 5 on Start up (Windows Error 7) - why and how do I overcome it? I have removed iTunes and reloaded it several times and also tried repairing, but to no avail.
apandua2105
To properly uninstall iTunes for Windows see this link:
http://support.apple.com/kb/HT1923
After redownload iTunes from Apple and reinstall:
http://www.apple.com/itunes/download/
Similar Messages
-
. I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions?
Hello Alexdad,
We've an article that can help get your iPod Nano working with your computer.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen -
When starting Firefox I got a message saying
"Runtime Error! This application has requested Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
I have unistalledFirefox several times and reinstalled 3.6 without success.
Thanks for your helpRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
have this issue since 10.6 update can't down grade to earlier version... I tunes drag painly slow to open ever after be re-installed several time. Any thought out there?
I had the same problem with my iPhone 4. I use Avast as my virus scanner, and the incoming mail filter in Avast screws with iTunes/iPhone and stops the computer recognising the phone. Disabled the mail filter and the iPhone syncs fine. You should give that a go. Possible that it is the same issue with the iPod too.
-
403 error when starting in windows 7 sp 1 O.S.
I am using Firefox 5.0 in Windows 7 Ultimate O.S. Recently Adobe Flash and SP 1 upgrades appear to have corrupted the URL of the default startup search on Yahoo to produce 403 "unauthorized" errors. I cannot use existing Firefox bookmarks or change the bad URL. My I.E. browser appears to be O.K. I tried Wisefixer software repair program but the problem still persists. Are there any articles on Firefox 5.0 running in Windows 7, SP 1? or, How to fix 403 errors? Problems? Known issues?
Hi Vidyadhar!
First of all: Thanks for your suggestions
I have done what you mentioned several times now, also a hard reset of the device.
I have made the observation that after installing the mentioned files and not starting the MI yet, there are the following files in the inbox-folder:
create.dir
8 xml-files
sap.comtcmobilewdlitecontainer~implementation.sda
Then I have tried to start the MI client, but same error as described. In the inbox-folder, only the create.dir and the *.sda-file are listed there. Is it possible that there is an error in the *.sda-file?
Best regards,
Christoph -
My iTunes suddenly stopped working. I uninstalled it and reinstalled it twice. It gives me an Error message 7 or windows error message 126. Any ideas of why this is happening?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
What does this mean: "The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem"? I tried reinstalling, but I get an error message saying something about permission to launch services.
Solving MSVCR80 issue and Windows iTunes install issues.
-
Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!Click here and follow the instructions.
(98888) -
When I try to download the windows support software it is coming up with an error message saying I am not connected to the internet but having checked the network diagnostics several times I am definitely connected but it still won't work. Any ideas?
I get a problem like yours. I have a mac mini with 2 hdds the server and hd2 I installed windows 7 and the windows works fine. except it will not allow me to get on the net. I get error 651. I can boot back to lion and the internet connection works. I googled and error 651 does seem to show up. I would like a work around.
-
I ran an iTunes update. It failed with the message "System Error. The program can't start because MSVCR80.DLL is missing from your computer. Try reinstalling the program to fix this problem." I tried reinstalling but get the same message. I looked in my Recycle Bin for that file name but there is none there. Is this a new file that iTunes wants?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99683) -
Getting "the procedure entry point CGImageRelease could not be located in the dynamic link library CoreGraphics.dll" error when starting Itunes. Haved reloaded many times and still the error.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
I've uninstalled and reinstalled iTunes several times and each time it says to re-install iTunes but it doesn't solve the problem. I've been trying to get this to work all day and I'm extremely frustrated. Someone please help me with this. I've done all the reserach on how to fix this and nothing has worked. I just get the same message over and over again.
When I go do download iTunes I get a screen that says, "The feature you are tyring to use is on a network resource that is unavailable." Then is says "Click OK to try again, or enter an alternate path to a folder containing the installation package iTunes64.msi in the box below". I click "OK" and it says that the path cannot be found. Don't know what do to here.
Sounds like at least two different things are happening to you at once here.
Steps for dealing with the "network resource" message, follow:
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
So, my Mac OS recently crashed. I installed the newest OS after reviewing the problem at an Apple store. The Mac works fine now but Photoshop refuses to open. When I open it, it comes up with this error message:
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
I have tried uninstalling and reinstalling the program several times and the error message persists. Please help me!If you are getting configuration erro while launching Photoshop, try to pefform below steps
1.Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly /Library and click on Go
2.Then open Application Support folder
Right click on Adobe folder
Click on get info
Click on symbol and Add Administrator and your current user name ( if not added )
Then give read and write permission to user name, admin, system and every one
Then click on Gear icon and select 'Apply to Enclosed
Click on lock icon
Launch Photoshop and check.
Maybe you are looking for
-
Flex app doesn't work when moved from original location
I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files
-
How to determine which pictures are in albums?
With 7000 pictures over 10 years, I decided to group some into albums. This I did. I then came back the next day to continue my task and learned that photos are not "moved" into albums but all 7000 remain in the library. Trouble is I do not know whic
-
Re: Qosmio x770 - memory card reader - problem
Hi! I want to know how to use correctly memory card slot. I put into it a memory stick pro duo. The card has been read correctly, but after that I had a huge problem with removing card from the slot. I had to use some tools to did it. What is wrong w
-
Whats the alternative to sqlldr because I want to add (update) not insert..
mornin gurus.. As title asks, Ive just sussed that SQLLDR just inserts into an empty table, but I need to update AND Insert.. I'll be running the code/command from a UNIX script. But just to get me started - how do I do this..? I'll be calling a file
-
PT880----Possible cold boot issue-----What are YOUR boot times??
I may have an issue with this board that I hadn't really noticed since I've been so heavy into the max overclock I could get. My post and then boot time is strange and annoying-----and sometimes I have to just shut off and turn on-----to actually com