Error -50 after failed data move to samsung hybrid internal drive.

The original data move front external WD 3tb USB drive fails with error -36.  Then attempting to write any data to that drive dives a -50 error. Only cure I have found is to re-partition the drive. Fixing permissions, verifying drive, repairing drive, deleting .DS files,, etc. Nothing works but a partition recreation. Any clues? 2009 MBP, 6gig ram, 256 g Samsung 840 pro SSD primary drive. 1tb Samsung hybrid as secondary drive.

That particular error happens on occasion after switching a TM drive from one Mac to another, erasing your TM disk/partition, or attaching a new TM drive with the same name as an old one.
You can usually fix this by simply re-selecting your TM drive in TM Preferences > Change Disk.
Since your backups are now working, it's likely ok.

Similar Messages

  • [INS-06001] Failed to perform operation due to internal driver error

    I'm installing GI 11.2.0.4 on the zone of solaris(SPARC) 11.1.
    Among executed runInstaller, the following error occured when
    "setup" button is pushed for checking SSH connectivity
    on "Secify Cluster Configuration(Step 4 of 9)" section.
    [INS-06001] Failed to perform operation due to internal driver error.
    Additionally, the following was output by a console executed runInstaller.
    # An unexpected error has been detected by HotSpot Virtual Machine:
    #  SIGBUS (0xa) at pc=0xffffffff3df832fc, pid=14407, tid=38
    # Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_51-b10 mixed mode)
    # Problematic frame:
    # C  [libc.so.1+0x832fc]
    # An error report file with more information is saved as hs_err_pid14407.log
    # If you would like to submit a bug report, please visit:
    #   http://java.sun.com/webapps/bugreport/crash.jsp
    Does anyone know the solution for this issue?
    The configuration of the system is the following.
    +--------------------------------------------+
    |         testserver (global zone)           |
    |+------------+                +------------+|
    ||   zone1    |                |   zone2    ||
    ||      +-----|  +----------+  |-----+      ||
    ||      |vnic3|--|etherstub1|--|vnic4|      ||
    ||      +-----|  +----------+  |-----+      ||
    ||            |                |            ||
    ||  +-----+   |                |  +-----+   ||
    ||  |vnic1|   |                |  |vnic2|   ||
    |+------------+                +------------+|
    |      |         +----------+        |       |
    |      +---------|etherstub0|--------+       |
    |                +----------+                |
    |                     |                      |
    |                  +-----+                   |
    +------------------|vnic0|-------------------+
                       +-----+
    zonecfg:kudotest01> export
    create -b
    set brand=solaris
    set zonepath=/zones/kudotest01
    set autoboot=false
    set ip-type=exclusive
    add net
    set configure-allowed-address=true
    set physical=vnic1
    end
    add net
    set configure-allowed-address=true
    set physical=vnic3
    end
    add anet
    set linkname=net0
    set lower-link=auto
    set configure-allowed-address=true
    set link-protection=mac-nospoof
    set mac-address=random
    end
    add device
    set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
    end
    zonecfg:kudotest02> export
    create -b
    set brand=solaris
    set zonepath=/zones/kudotest02
    set autoboot=false
    set ip-type=exclusive
    add net
    set configure-allowed-address=true
    set physical=vnic2
    end
    add net
    set configure-allowed-address=true
    set physical=vnic4
    end
    add anet
    set linkname=net0
    set lower-link=auto
    set configure-allowed-address=true
    set link-protection=mac-nospoof
    set mac-address=random
    end
    add device
    set match=/dev/dsk/c0t600144F00010E010379A5491444F0001d0
    end
    zonecfg:kudotest02>
    testserver:~# dladm show-vnic
    LINK                OVER         SPEED  MACADDRESS        MACADDRTYPE       VID
    vnic0               etherstub0   40000  2:8:20:b5:32:c1   random            0
    vnic1               etherstub0   40000  2:8:20:45:a2:af   random            0
    vnic2               etherstub0   40000  2:8:20:86:7e:4e   random            0
    vnic3               etherstub1   40000  2:8:20:8a:96:a    random            0
    vnic4               etherstub1   40000  2:8:20:ef:f3:dd   random            0
    root@kudotest01:~# ipadm show-addr
    ADDROBJ           TYPE     STATE        ADDR
    lo0/v4            static   ok           127.0.0.1/8
    vnic1/v4          static   ok           192.168.120.2/24
    vnic3/privaddr    static   ok           192.169.120.2/24
    lo0/v6            static   ok           ::1/128
    vnic1/v6          addrconf ok           fe80::8:20ff:fe45:a2af/10
    root@kudotest02:~# ipadm show-addr
    ADDROBJ           TYPE     STATE        ADDR
    lo0/v4            static   ok           127.0.0.1/8
    vnic2/v4          static   ok           192.168.120.3/24
    vnic4/privaddr    static   ok           192.169.120.3/24
    lo0/v6            static   ok           ::1/128
    vnic2/v6          addrconf ok           fe80::8:20ff:fe86:7e4e/10

    Please check https://hiteshgondalia.wordpress.com/2012/12/08/ssh-setup-fail-unable-to-find-ssh_host_rsa_key-pub/, Oracle Application DBA: [INS-06001] Failed to perform operation due to internal driver error (During installation of RAC…

  • System drive full want to move files to another internal drive

    my sysytem drive is almost full it is only 52gb I have another internal drive that to 100gb and I want to move everything to that drive. I kow that I can do this by making a disk image of the system disk. however I need a bootable cd, which I donot have. can i use another mechine to boot with and make the disk image that way? if so how?
    thanks

    MDD G4s have room for four drives on two IDE buses (plus two optical bays). No reason to go through the disk image intermediate step that I can see though. Just use Disk Utility -> Restore to move or clone everything over. Or you can do same with CCC, or SuperDuper. Lots of ways.
    No need for bootable CD (and CD is rather small) and while BootCD worked with Panther, no version is out for Tiger.
    You can just boot from your Tiger DVD and use Disk Utility from there.
    When copying between drives, it is a lot faster to copy from/to different IDE buses. If your OEM boot drive is in the ATA/100 cage on the right (in front of cpus) then copy to the ATA/66 bus on the left. You might want to zero the drive or test your 100GB (odd number, that, I have seen 80 and 120, but 100GB?).
    If you don't have OS X CD/DVD, then I would suggest buying a retail 10.4.6 DVD now.

  • How to move iPhoto Library from internal drive to ext. drive?

    Hello,
    If someome can assist me with the procedure on how to move my iphoto library from my internal drive to external drive, so that I can keep and access all my iphoto library files primarily from the external drive. In addition I would also like to know once the process has been completed if it would be safe to delete the internal iphoto library? Any assistance would be greatly appreciated.
    Thanks,
    Jag

    First and foremost, before you begin, make sure you're doing some sort of backup of those photos and your systems.  Preferably with Time Machine to some sort of external drive (besides the one that will store the photos) or Time Capsule.
    Then you can follow these steps:
    1) Make sure the external drive is formatted for the Mac.  You can use Disk Utility (applications-->utilities) and select the drive to find out if it's HFS Extended format.
    2) Quit iPhoto, then drag the iPhoto library onto the eternal drive and let it copy.
    3) Once it's done copying, hold down the Option key and click to launch iPhoto, it will ask you to select an iphoto library and you would choose the one on the external drive.
    4) You're safe to delete the original iPhoto Library from there.. however I still recommend you've made extra sure to back your stuff up.

  • Need help with error message after failed iSync: Leopard and Palm OS

    I recently upgraded to a new computer which came with Leopard installed. In my old computer, Tiger OS, all was well when syncing to my Palm device.
    I tried going from handheld to desktop with slow synch turned on in iSync and now I get this message re: failure--
    "iSync Conduit starting 9/6/08 8:21:12 AM
    Timeout waiting for Sync Engine, exiting 9/6/08 8:27:31 AM
    iSync Conduit synchronization failed
    “iSync Conduit” failed (error = #-2)"
    Any ideas--please help.

    I wish you success.
    I have an older Palm, the Zire. Once I got the most recent Palm software and chose, at least for now, to use iSync, I haven't noticed any problems.
    Since I haven't used the "T" family of Palms, I can only guess that the process is much the same as with the Zire. You can disable the MAc syncing, move your currently disabled conduits back into Palm syncing, reinstall what Palm lists as your most recent software (and make sure all of your calendar and contacts info is just as you want it), do a sync through the HotSync Manager (ignoring iCal). I'd do a restart just to clear the system. It appears there is a warning note on resetting the iSync history, so you might not want to do that but just manually clean up any inconsistencies in iCal before you try once again.
    [I actually wanted to just accept my Palm calendar so trashed my iCal calendar after some questionable syncs, but you can do an export to save the iCal calendar before you wipe it out.]
    But my impression is that to get pass the messages you initially wrote up, you'll have to ask the Palm discussions folks for help. They are very helpful.
    ec

  • Error in one of data mover scripts during campus solution installation

    Hi everybody,
    This is my first attempt to install one of peoplesoft products
    I am installing HCM 9.0 on windows 2008 64 bit, oracle 11g
    I am now in task called 7A-16-9: Updating PeopleTools System Data
    I ran pt849tls.dms successfully
    but pt850tls.dms failed with error:
    File: Data MoverSQL error. Stmt #: 0 Error Position: 25 Return: 904 - ORA-00904: "PT_RETENTIONDAYS": invalid identifier
    Failed SQL stmt:UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS=RETENTIONDAYS
    Error: SQL execute error for UPDATE PS_PRCSSYSTEM SET PT_RETENTIONDAYS=RETENTIONDAYS
    Is there a script that I have missed?
    I followed the instructions step by step
    Thanks for your help,,,

    I highly appreciate your efforts,
    I ran rel849un.sql and rel850un.sql successfully (I checked the corresponding log files without errors)
    table description is:
    CREATE TABLE "SYSADM"."PS_PRCSSYSTEM"
    (     "OPSYS" VARCHAR2(1 CHAR),
         "RETENTIONDAYS" NUMBER(*,0),
         "PRCSPURGENEXTDTTM" TIMESTAMP (6),
         "RECURDTTM" TIMESTAMP (6),
         "PRCSPURGERECURNAME" VARCHAR2(30 CHAR),
         "PURGEPRCSFILES" NUMBER(*,0),
         "ARCH_PROCESSED" VARCHAR2(1 CHAR),
         "PRCSSYSLOADOPT" VARCHAR2(2 CHAR),
         "VERSION_UPDATED" VARCHAR2(1 CHAR))
    Best Regards,,,

  • Iphone 3g stuck in recovery mode(error 14) after failed 3.2.1 update

    My Iphone is stuck in recovery mode after it failed to update to operating system 3.2.1 . When I press restore in itunes, the process stops at around the 20% mark and come up with error 14. I have already manually deleted and redownloaded the update 4 times, reinstalled itunes twice and created a new user on my pc and downloaded and update through this new user and disabled all security but I still keep getting the same error message. My pc is only six months old. I successfully updated the phone to operating system 3.1 a few months ago with no problems. Has anyone found a way to fix this?? This is ridiculous!!

    This is the only way to make sure you've uninstalled itunes completely:
    1. Restart your computer.
    2. After the computer restarts, open Local Disk (C:) located in Computer or whichever hard disk your programs are installed on.
    3. Open the Program Files folder.
    4. Right-click the iTunes folder, choose Delete, and choose Yes when asked to confirm the deletion. Note: This folder may have already been deleted if iTunes was successfully removed.
    5. Right-click the iPod folder, choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    6. Right-click the QuickTime folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    7. Right-click the Bonjour folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    8. Open the Common Files folder.
    9. Right-click the Apple folder (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    10. Open Local Disk (C:) located in Computer or whichever hard disk your operating system is installed on.
    11. Open the Windows folder.
    12. Open the System32 folder.
    13. Right-click the QuickTime file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    14. Right-click the QuickTimeVR file (if it exists), choose Delete, and choose Yes when asked to confirm the deletion. Click Continue if Windows needs confirmation or permission to continue.
    15. Right-click the Recycle Bin and choose Empty Recycle Bin.

  • Error 1712 after failed Software Restore?

    I attempted to reinstall the bundled software from the Software Restore CD which came with OS 10.2.
    It hung near the end for over three hours so I restarted.
    Now everytime I try the Restore installation again I get a 1712 error message with "Quit" as the only choice available.
    I searched everywhere but could only learn that 1712 was a timeout error.
    Does anyone know a way to get past this?
    Thanks.
    ibook   Mac OS X (10.2.x)  

    I actually was running the Software Restore after I completed a successful Archive and Install.
    (I don't have a handy way to back up the data. I might seek another Mac owner and try the FW Target Disk Mode and do a clean install).
    Thanks for replying.
    em
    ibbok g3   Mac OS X (10.2.x)  

  • Error occured after uploading data

    Hi experts,
                      i have dveloped bdc for mmo1 while uploadind data the performance is poor in my excel 75,000 records are there any one give some idea....
    Thanks in advance...
    rajesh

    Hi ,
    Also try to have structure defined for all tables individually and dont directly refrence it.
    Try to have the order of fields in file(application or presentation) matching exactly with internal table and order of filling columns in MM01.
    Try to aviod Deep types in structures such as string or nested structure .
    << cut and paste from:
    http://www.sap-img.com/basis/sap-system-performance-issues.htm
    removed >>
    << Points unassigned >>
    Edited by: Rob Burbank on Feb 28, 2009 10:32 AM

  • HT201263 All steps to Restore get "Unknown Error (1)" after failing an Update

    So what happens if your no longer covered by warrenty, therefore can't go into a genius for a replacement and you get this error?
    Basically your SOL?
    Is there ABSOLUTLY no way of fixing this?

    Thanks for the pointer to the KB article. Error 1 is missing from the list provided by iTunes (more information), but I was afraid it means hardware. Will try on another computer, but I'm afraid the phone is sick.
    Thanks,
    Manfred

  • Missing original files after attempting to move all files to external drive

    After reading numerous threads regarding iTunes not being able to locate the original file after moving it to an external drive, I'm in a slightly different boat since most seem to be able to "locate" their original music. It appears the order in which this is done is particularly important and I suspect this is where I screwed up. I posted this earlier in response to another thread mistakenly under iTunes for Windows, but now I'm realizing where I may have made my main mistake.
    Over a year ago, I had moved my iTunes folder from my Music folder from the HD to my 250 GB external drive. I did not rename it. Kept it the same name. Went into the Advanced folder in iTunes Preferences and chose to use the external drive as my source for music and everything worked fine. Don't remember consolidating and it appears based on the way that I did it, I may not have had to.
    Recently I found a folder in my Music folder on the Mac's HD titled iTunes and assumed this was holding the original files and that my iTunes wasn't actually running from my external drive at all, but that it had been using the HD on the Mac the whole time (didn't realize that it kept a copy there). So, I took that file and moved it to the external drive. Not sure if I "replaced" it or "deleted" the old one on the external drive (it was late and it was a few days ago). Now I'm realizing that I probably took out my true original files as now all that is there is about 16 music files under "iTunes Music". I tried consolidating and this didn't make any difference since it just consolidated all of the same files. If I open iTunes and hold the option key down that doesn't make any difference either since it still can't find the originals.
    Now that I realize what I've done, thinking back I should have been more surprised that it was only 1.3GB of music when really my library is closer to 40 GB. I've just lost a lot of music. Is there anyway to retrieve the rest of the original library or am I cooked?
    Many thanks for any help.

    turingtest2 post 01/2014: MSVCR80.dll missing, cannot install iTunes - https://discussions.apple.com/message/24618776
    iTunes for Windows: Missing MSVCR80.dll - https://sites.google.com/site/appleclubfhs/support/advice-and-articles/itunes-wi ndows-missing-msvcr80-dll - install as administrator.

  • How do I Move Events from an Internal to External drive?

    Hello,
    I am trying to move events on my internal drive to my new external drive. Everything is set up and I see the external drive, but after reading other posts and replies it seems I can't just move the files from the internal to external drive by dragging and dropping using finder.
    Can anyone give some guidance on how I do this so i don't have to reload all my videos on the external drive.
    Also, when they are moved over, will i see the external drive when I open iMovie, or do I ahve to do something to see it in my Events Library.
    Any help be be appreciated.

    Can anyone give some guidance on how I do this so i don't have to reload all my videos on the external drive.
    Best approach is to import files directly to the external drive during the initial import process by selecting the appropriate drive in the import window. However, for Events already stores, here is A QUICKIE VIDEO TUTORIAL.
    Also, when they are moved over, will i see the external drive when I open iMovie, or do I ahve to do something to see it in my Events Library.
    You must activate the "external drive" icon in iMovie '08 to make your external drives visible in the Event Library list. (I.e. Press the icon to the right of the "Event Library" title and to the left of the actual Event Window.) Sorry, answered your e-mail message before seeing the second question here.

  • How to move lrcatb back to internal drivefrom ext drive

    how do i move lrcat 5.3 file from external drive back to macbook pro internal drive and  keep all photos on external drive where they are now, my mackbook pro keeps shutting down, with maverick and seagate ext drive, i am thinking if  i move lrcat back to internal drive, it may help, i want to do this all thru lr of course, please advise

    Just drag it n' drop it (just the lrcat file itself may be all that is required, but it would probably be best to drag the folder it's in instead, so that everything that's associated with the catalog comes along too, e.g. previews). Location of catalog bears no relation to the location of photo files in said catalog..

  • Error: Could not continue scan with nolock due to data movement, DBCC proccache will clear the probelm

    SQL Server: 2008 R2 SP2
    Before describing my problem, I have gone via the forum, there is no view or functions inside my stored procedure
    When running a particular stored procedure inside crystal report, the error " Could not continue scan with nolock due to data movement" comes once every few weeks. After I clear the query cache plan, it works again for few weeks and the problem
    comes again. During these few weeks, there is no restart or query plan clearing.
    If I run the stored procedure inside SSMS, where the SQL statement is copied and pasted from SQL profiler during crystal report run, there is no error.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler, I have actually saved the query plans. Unfortunately, this forum does not accept attachments, or otherwise I will post my query plans
    here.
    There is one thing I notice about the query plan is during nested loop operation, there is a warning "no join predicate". I don't use any views or UDF in the statement, nor did I use pre-1992 ANSI join syntax. However, I did use table variables.
    My guess is whether this will cause " Could not continue scan with nolock due to data movement", after I clear the cache, I run crystal report again, and I look at the plan again, the "nested loop no join predicate" warning is gone.
    Running this stored procedure took 1 second maximum, even when this error is popping up, it pop up within 1 second.
    DBCC checkdb has been run
    The same stored procedure running by crystal report in a SQL 2008 (non r2) live environment has no problems, so I am thinking this is R2 specific problems.
    The "nested loop no join predicate" error SQL statment is below, no views, no udf, but table variables
    INSERT @ChequeAccount
    SELECT        PS.PaySummaryID, PS.EmployeeID, PS.CostCentreID,
                (PS.GrossPay    + PS.LumpSumA + PS.LumpSumB    + PS.LumpSumD+ PS.LumpSumE+ PS.ETP+ PS.PaymentsAfterTax    - PS.DeductionsAfterTax  
     - PS.Tax- PS.ETPTax    + PS.TaxRebate) * -1 AS Amount,
                CGLM.GLAccountID
    FROM Pay_Summary PS JOIN Input_Sheet ISH ON PS.InputSheetID = ISH.InputSheetID  AND  ISH.PayrollID = @binPayrollID   
    AND PS.PaySummaryID NOT IN (SELECT PaySummaryID FROM @ChequeAccount)
    JOIN Payroll P ON P.PayrollID = ISH.PayrollID AND P.EmployerID = @binEmployerID
    JOIN CustomGLFixMapping CGLM ON CGLM.EmployerID = P.EmployerID AND CustomGLFixMappingNameID = 1 AND CGLM.CostCentreID IS NULL

    The error Could not continue scan with nolock due to data movement can occur when you use the NOLOCK table hint, or use the command SET TRANSACTION ISOLATION LEVEL READ UNCOMMITTED. That is, so-called dirty reads. The error is not related to the
    query plan per se, but when scanning a table, the storage engine will use an IAM scan rather than following the clustered index. If there is simultaneous activity, the storage engine may detect this and abort the operation to avoid returning incorrect data.
    Or it may not detect it, and return uncommitted data or fail to return committed data.
    All of these effects are transitory and they will not show up when you are alone on the system, only when there is concurrent activity in one or more of the tables in the query.
    Using dirty reads is a risky business for the reasons explained above, and it takes careful analysis to understand whether you can live with the errors you can get from a particular query. The error about data movement can be handled: trap the error and
    resubmit the query. But what about spurious incorrect results?
    If you believe locking to be a problem, you should consider setting the database to READ_COMMITTED_SNAPSHOT
    and take out all use of READ UNCOMMITTED/NOLOCK. When the database is in READ_COMMITTED_SNAPSHOT, readers read from the snapshot and only see committed data without blocking writers. This has some other effects like requiring a bigger tempdb,
    and there is a risk for other types of concurrency errors, but they tend to be smaller risks.
    I discovered running in SSMS and crystal report generate 2 different query plans even I copied the SQL from SQL profiler,
    This is because SSMS by default runs with SET ARITHABORT ON. I discuss this in more detail in this article on my web site:
    http://www.sommarskog.se/query-plan-mysteries.html
    However, as I said, this problem is not related to the query plan as such, although some query plans are more susceptible to this error than others. (All plans are suscpeitble to produce incorrect results).
    Erland Sommarskog, SQL Server MVP, [email protected]

  • HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running".  Windows 7.

    After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run.  itunes will not now run.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for