Error -50 NOT SOLVED

I've read all the posts here about error -50 when trying to download purchased music. I've read the Apple support documents. I'm just trying to download music, and I don't have antivirus software or firewall activated. I never had a problem downloading with previous versions of iTunes, but since this is the first time I've tried with version 7 I can't be sure if it's related to the new version or not.
I have paid for music I can't access. Suggestions appreciated.

I purchased an album and just track 9 is having the problem. The other 13 tracks have downloaded just fine.
It's possible that the copy on the iTunes server is damaged. (I think that'd be more likely to produce an error 10000 than a 50, but a 50 is within the bounds of possibility.)
So, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
EDIT: Changed "playing properly" to "downloading properly". Sorry about the inital mistake.
Message was edited by: b noir

Similar Messages

Tried the solutions posted for this "SubVI filter not executable. Undefined error" but not solving the problem

Hello,
I am trying to use a lowpass filter for my application but getting the error "SubVI filter not executable. Undefined error".I tried working with the solutions at this post
http://forums.ni.com/t5/LabVIEW/SubVI-filter-not-executable-Undefined-error/m-p/1996701#M657751 and results with
1. Create a blank vi, put a VI filter in the block diagram (this should not be functional as it is not wired), copy it and paste it in my other project. I believe if the filter is the first vi of a blank project, it is funcitonal and then you may copy it wherever you need to.
Result:
2.Tried to open the filter panel of the Filter but showing the same error as shown inthe below image
Don't why the solutions worked for others are not working.Can someone suggest a solution for this.
thanks in advance.

Hi PatanGova,
Very strange error. Actually, there are no required inputs on this express VI, so it should be able to run even without wires. It is not correct as you said: "this should not be functional as it is not wired". Nothing will happen, true, but the run arrow should not be broken.
For some reason, the VI with the Filter express VI fails to compile. I tried it on my computer (LV 2013) and get no error when I add it to a new VI. As was suggested in the linked forum thread, you need to open the front panel of the Filter VI and run it to see the explicit error.
If you do, do you also get the error:
"This VI claims to be part of a library that does not include the VI. The VI might have been deleted from the library. Add the VI to the library again or select File - Disconnect from the library."?
If you do, it seems that you may have a project library somewhere that has taken ownership of the express VI. The ownership prevents you from running or editing the express VI. To free the VI, you need to do one of two things. Either, you need to load the library into memory, or you need to disconnect the VI from the library. Either way, you need to find the project library that has taken the ownership of the VI. As soon as it is released, it should run for you. You release it by selecting File»Disconnect from Library on the VI.
The workaround described in your link (and also here: http://forums.ni.com/t5/LabVIEW/compatibility-problem-labview-2009-2010-2011-quot-This-VI-claims/td-... tells that you can make a copy of the VI and thereby create another instance that is free. This solution may work for you as well, but if not, you may not have created the copy properly. Maybe your copy of the VI also became part of some project library that took ownership. In either way, you should rather find the project library to release the VI before trying the workaround to copy it.
If project library ownership is not the problem, maybe the problem is connected to LV 2011, as most forum posters report that it only happens here.

HT1751 I was installing iTunes 11.1.4 and it was unsuccessful. I get a message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Error: Preset not found: '/etc/mkinitcpio.d/linux.preset' [Solved]

Hi
I tried to initial RAM disk with and got error message
[root@archiso /]# mkinitcpio -p linux
==> ERROR; Preset not found: '/etc/mkinitcpio.d/linux.preset'
And I found some answers but one said
ALARM doesn't use an uInitrd.
and another said I have to be install kernel26.
How I can solve this?
Last edited by rob111 (2013-08-31 17:41:46)

rob111 wrote:I can switch between [root@archiso /] and root@archiso ~ #.
This is confusing given this report. Could you confirm exactly the prompt you have when you try to run the configuration commands such as mkinitcpio -p linux.
Because, as Trilby says, if you really have successfully installed base and base-devel and chrooted into the system, you should not be seeing these errors. Also, I am pretty sure that you should not have needed to verify the master key manually. When Arch first introduced signing, manual verification of keys was required but I am almost certain that is no longer the case. So something is almost certainly wrong at an earlier stage and you need to fix that, as Trilby says, before moving onto the next stage.
EDIT: "As Trilby says" should now read "as Trilby says again" - I'm too slow.
Last edited by cfr (2013-08-25 22:57:40)

KB26671 does not solve app install error

Has anyone else had an error when trying to download and install an app? I keep getting the error installing app, try again later when installing one specific app.
I was on the phone with BB tech support for over an hour, and went through the steps in that KB article numerous times. The paypal registration and authorization has not solved the problem. Has anyone been able to resolve the issue? I have been able to download both paid and free apps other than this one. Please help!!!

are you both referring to this article?
KB26671 "Install Error: There was a problem during installation. Please try again." is encountered when attempting to download an application from BlackBerry App World on the BlackBerry PlayBook tablet
if you wish to get the logs, please read this other article:
KB26038 How to obtain logs from the BlackBerry PlayBook
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.

I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks

HT3964 I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes. Can somebody advise, please?

I am getting the error message "No AirPort card installed" Restarting my iMac desktop does not solve this (Apple help says I need to reset the SMC this way, but nothing changes). Can somebody advise, please?

Thanks for the flag J.K. - they contaced me and solved my problem. On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

When i open my itunes of recent edition , i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

When i open my itunes of recent edition 12.0, i am getting error as "itunes.exe has been set to run in compatabiltity mode " Though i reinstalled it several times from last days ,the problem is not solved. Please provide the solution asap.

Try iTunes for Windows: How to turn off Compatibility Mode.
tt2

HT201413 error 1600 is not solve so pls any help me.

error 1600 is not solve so pls any help me.
and contect me.
pls...........
thank u

> How many times have you posted this question by now?
5 times:
http://forum.java.sun.com/thread.jspa?threadID=650196
http://forum.java.sun.com/thread.jspa?threadID=650958
http://forum.java.sun.com/thread.jspa?threadID=655214
http://forum.java.sun.com/thread.jspa?threadID=655229
http://forum.java.sun.com/thread.jspa?threadID=655231

[Solved]error: 'xorg': not found in sync db

I'm trying to install Gnome onto this computer of mine using the instructions http://wiki.archlinux.org/index.php/Des … e_X_server. But when I type "sudo pacman -S xorg" I get "error: 'xorg': not found in sync db".
Last edited by jordanwb (2008-07-03 21:56:49)

Solved. "sudo pacman -Syu"

[solved] error: 'gstreamer': not found in sync db

hi, i just did an -Syu and now i cant play videos with vlc!! it cant find the decoder!! For some reason, pacman cant find any gstreamer packages in the repos!!
how do i solve this??
[root@ArchLinux danny]# pacman -Ss gst
[root@ArchLinux danny]# pacman -Sy gstreamer
:: Synchronising package databases...
core is up to date
extra is up to date
community is up to date
gstreamer package not found, searching for group...
error: 'gstreamer': not found in sync db
[root@ArchLinux danny]#
[root@ArchLinux danny]# pacman -Qs gstreamer
local/gstreamer0.10 0.10.25-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.25-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.25-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-ffmpeg 0.10.9-1 (gstreamer0.10-plugins)
Gstreamer FFMpeg Plugin
local/gstreamer0.10-good 0.10.17-2
GStreamer Multimedia Framework Good plugin libraries
local/gstreamer0.10-good-plugins 0.10.17-2 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Good Plugins (gst-plugins-good)
local/gstreamer0.10-python 0.10.17-1
Python bindings for GStreamer 0.10
local/gstreamer0.10-ugly 0.10.13-3
GStreamer Multimedia Framework Ugly plugin libraries
local/gstreamer0.10-ugly-plugins 0.10.13-3 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Ugly Plugins (gst-plugins-ugly)
[root@ArchLinux danny]#
Last edited by ninjaprawn (2010-02-11 20:49:03)

wonder wrote:because the actual name is gstreamer0.10. the only thing that is missing is gstreamer0.10-bad-plugins and you might want to install them.
hmmmmmm, I don't know? surely, if I do pacman -Ss gst, it should be listed from the repo in the output then?? As you can see from my first post, it isn't!!

[SOLVED] == ERROR: file not found: `/sbin/dmsetup'

[EDIT] A much simpler way to deal with this is to explicitly ignore the kernel update during a full system update:
pacman -Syu --ignore linux
Then explicitly update the kernel alone:
pacman -S linux
[EDIT] First, after a full system update I had to move the STUB kernel image from the UEFI directory back to /boot, them recreate the images a second time. The systemd service moved it back to the UEFI directory.
[EDIT] The use of 'mdadm_udev' in HOOKS= also seems to be no longer just 'preferred' to the 'mdadm' hook but instead is now mandatory.
I've read the news item...
Changes to LVM
2013-02-12 - Thomas Bächler
With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
If you run pacman -Syu and update device-mapper, linux and lvm2 at the same time, you will get an error message that /sbin/dmsetup is missing. Run mkinitcpio -p linux again after the update to avoid any problems.
...and I do get the message...
==> ERROR: file not found: `/sbin/dmsetup'
...but after a full system update with...
pacman -Syu
...when I execute...
mkinitcpio -p linux
...this is what I get...
Building image from preset: 'default'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
Building image from preset: 'fallback'
/boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
ERROR:specified kernel image does not exist: `/boot/vmlinuz-linux'
So of course if I reboot I get the dreaded 'No volume groups found' message.
I should mention that I use the systemd path and service to move the kennel after it has been updated.
Last edited by KairiTech (2013-04-07 02:45:12)

With lvm2 2.02.98-3, we now utilize lvmetad to activate LVM volumes automatically. This implies the following changes:
The lvm2 initramfs hook now requires the udev hook.
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
You can restrict the volumes that are activated automatically by setting the auto_activation_volume_list in /etc/lvm/lvm.conf. If in doubt, leave this option commented out.
If you need monitoring (needed for snapshots), run systemctl enable lvm-monitoring.service.
The lvmwait kernel command line option is no longer needed and has no effect.
Just to confirm. You did all these steps, right?
EDIT: I just noticed something:
KairiTech wrote:HOOKS="base udev autodetect sata mdadm usbinput keymap encrypt lvm2 filesystems timestamp shutdown"
Replace
mdadm
with
mdadm_udev
. Maybe this is nothing, but it is recommended to use this one instead of the other.
NEW EDIT: Expecially this one
The use_lvmetad = 1 must be set in /etc/lvm/lvm.conf. This is the default now - if you have a lvm.conf.pacnew file, you must merge this change.
Last edited by s1ln7m4s7r (2013-03-24 20:42:55)

[solved] 'ERROR: file not found:' when running 'mkinitcpio -p linux'

$ sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.13.5-1-ARCH
-> Running build hook: [systemd]
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
==> ERROR: file not found: `'
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: smsmdtv
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
-> Running build hook: [consolefont]
-> Running build hook: [keymap]
==> Generating module dependencies
==> Creating cat initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
Things seems to work, but I'm a bit worried.
It has just started. PS/2 atkbd stuff went fine.
journalctl shows
Feb 26 22:36:09 localhost systemd-udevd[62]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[63]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost systemd-udevd[64]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[65]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export -
Feb 26 22:36:09 localhost kernel: sda: sda1 sda2 sda3 sda4
Feb 26 22:36:09 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Feb 26 22:36:09 localhost systemd-udevd[66]: failed to execute '/usr/lib/udev/ata_id' 'ata_id --export /de
Feb 26 22:36:09 localhost systemd-udevd[67]: failed to execute '/usr/lib/udev/scsi_id' 'scsi_id --export
I'm using [testing] but I don't know if it matters.
What should I post?
Last edited by karol (2014-03-15 15:03:56)

The systemd build hook looks like this:
build() {
local rules unit
# from base
add_binary /bin/mount
add_binary /usr/bin/kmod /usr/bin/modprobe
# systemd
add_binary /usr/lib/systemd/systemd /init
add_binary /usr/bin/systemd-tmpfiles
# generate sysroot.mount and sysroot-usr.mount
add_file "/usr/lib/systemd/system-generators/systemd-fstab-generator"
# udev rules and systemd units
map add_udev_rule "$rules" \
50-udev-default.rules \
60-persistent-storage.rules \
64-btrfs.rules \
80-drivers.rules \
99-systemd.rules \
map add_systemd_unit \
ctrl-alt-del.target \
initrd-cleanup.service \
initrd-fs.target \
initrd-parse-etc.service \
initrd-root-fs.target \
initrd-switch-root.service \
initrd-switch-root.target \
initrd-udevadm-cleanup-db.service \
initrd.target \
kmod-static-nodes.service \
sockets.target \
[email protected] \
systemd-journald.service \
systemd-tmpfiles-setup-dev.service \
systemd-udev-trigger.service \
systemd-udevd-control.socket \
systemd-udevd-kernel.socket \
systemd-udevd.service
add_symlink "/usr/lib/systemd/system/default.target" "initrd.target"
# libdbus needs the passwd info of the root user
# TODO: make sure this is no longer necessary when systemctl moves to sd-bus
add_file "/etc/nsswitch.conf"
add_file "/etc/passwd"
add_binary "$(readlink -f /usr/lib/libnss_files.so)"
# udev wants /etc/group since it doesn't launch with --resolve-names=never
add_file "/etc/group"
Do all of those files exist on your sytemd? I'm not running testing nor systemd in my initrd, so I can't do much checking.
Edit: You're not the only one. Bug report: https://bugs.archlinux.org/task/39059
Last edited by Scimmia (2014-02-27 06:59:55)

[solved] PGKBUILD for hg package error "abort: HTTP Error 404: NOT...

Im working on a PKGBUILD for pcw-hg using the example PKGBUILD-hg.proto as a guide
I can do..
hg clone https://bitbucket.org/emg/pcw
..and everything works fine, but with makepkg and the PKGBUILD im creating I get "abort: HTTP Error 404: NOT FOUND"
Heres what Ive got..
# Maintainer: tjwoosta <[email protected]>
pkgname='pcw-hg'
pkgver=146
pkgrel=1
pkgdesc="pcw uses inotify to monitor a directory tree (created by ii) and \
open terminals running cw with the in and out files for each channel."
arch=('i686' 'x86_64')
url="http://www.deepcube.net/code/pcw/"
license=('MIT')
depends=('ii-emg-hg' 'srw-hg')
makedepends=('mercurial')
provides=('pcw')
conflicts=('pcw')
_hgroot="https://bitbucket.org/emg/"
_hgrepo="pcw"
build() {
cd "$srcdir"
msg "Connecting to Mercurial server...."
if [ -d $_hgrepo ] ; then
cd $_hgrepo
hg pull -u
msg "The local files are updated."
else
hg clone $_hgroot $_hgrepo
fi
msg "Mercurial checkout done or server timeout"
msg "Starting make..."
rm -rf "$srcdir/$_hgrepo-build"
cp -r "$srcdir/$_hgrepo" "$srcdir/$_hgrepo-build"
cd "$srcdir/$_hgrepo-build"
make
package() {
cd "$srcdir/$_hgrepo-build"
make PREFIX="/usr" DESTDIR="$pkgdir/" install
install -D -m644 LICENSE \
"$pkgdir/usr/share/licenses/$pkgname/license.txt"
install -D -m755 extras/cw_color.sh \
"$pkgdir/usr/bin/cw_color.sh"
install -D -m755 extras/chat.sh \
"$pkgdir/usr/bin/chat.sh"
install -D -m755 extras/pcw_notify.sh \
"$pkgdir/usr/bin/pcw_notify.sh"
Any idea what Im doing wrong?
Last edited by tjwoosta (2011-03-02 03:17:01)

jasonwryan wrote:
You could try removing the trailing slash on hg_root and just have:
_hgroot="https://bitbucket.org/emg"
lol, I cant believe I didnt think or that, I tried all kinds of crazy stuff. Works though thank you

Solved - Cannot install gimp : error: 'libmng': not found in sync db

This is the code I get. I think something is wrong with my pacman since it was working fine at the begainning.
bash-3.2# pacman -Syu
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
local database is up to date
bash-3.2# pacman -S gimp
Warning: gimpshop provides gimp
resolving dependencies...
error: cannot resolve "libmng", a dependency of "gimpshop"
error: failed to prepare transaction (could not satisfy dependencies)
:: gimpshop: requires libmng
bash-3.2# pacman -S libmng
error: 'libmng': not found in sync db
Vlc is installed but if I try this I still get that kind of error.
bash-3.2# pacman -S vlc
error: 'vlc': not found in sync db
This is my pacman.conf
# /etc/pacman.conf
# See the pacman manpage for option directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# Unstable is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[unstable]
#Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
And this is my mirrorlist
# Arch Linux repository mirrorlist
# United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
#Server = ftp://mirrors.unixheads.org/archlinux/$repo/os/i686
#Server = ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
#Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
#Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
#Server = http://mirror.neotuli.net/arch/$repo/os/i686
# South America
# - Brazil
#Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
#Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
#Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
#Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
#Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
#Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
#Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
#Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
#Server = http://mir.archlinux.fr/$repo/os/i686
#Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
# - Germany
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
#Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/i686
#Server = http://archlinux.mirrors.uk2.net/$repo/os/i686
# - Greece
#Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
#Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
#Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
#Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
#Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Poland
#Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
#Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
#Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Portugal
#Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
#Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
#Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
#Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
#Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
#Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
#Server = ftp://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
#Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
#Server = ftp://hell.org.ua/archlinux/$repo/os/i686
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# Australia
#Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
#Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686
# Setup-Entry
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Ho and I really like Arch, I just need to know this distribution better.
And thanks for the help
Last edited by odf (2008-07-18 19:26:44)

Not sure why typing 'gimp' is bringing up 'gimpshop', but anyhoo...
I just punched in 'http://mirrors.easynews.com/linux/archl … po/os/i686' into Epiphany and it 404's, so I'd assume it's down at the mo. Meantime, if you go into your mirrorlist and uncomment whichever 'Server = *' is closest to you (you could just do any of them, but the nearest ones will give you better performance) and comment out that bottom line.
All going to plan, that should sort it.
Last edited by ThomasBisset (2008-07-18 00:24:54)

Error -50 NOT SOLVED

Similar Messages

Maybe you are looking for