Error 50 when i update songs

I just upgraded to itunes 5.0 and i think ever since i did i have been getting this error saying i cant update my songs because of error 50. it will go through the updating in the upper part of the screen and the songs will be on the ipod but this error comes up. any suggestions?

I have the same problem, but I ran some tests on it.
The problem for me occurs only when I sync my outlook calendar.
I have tried turning off and on the other sync options and it seems like the calendar is the only problem.
I then cleared out everything in the calendar and replaced it with a single entry and that went fine.
I have readded all of the calendar content from a back up in 6 mth blocks and iTunes has been able to synch them properly.
Problem solved.
I would guess that the problem is with the quantity of data being transferred (more or less) so with Photos or with Contacts, perhaps trying the same thing, breaking it down into chunks, might solve the problem.
Anyone with a better solution? I would be very happy to hear it. Meantime, I hope this helps.
R

Similar Messages

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

Error when generating update program

Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
null

Hi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards

I am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for

sorry i was typing fast and didnt check spelling and stuff

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I keep getting network connections error when downloading update for iPhone 4. Any suggestions?

I think I solved the problem by initiating the update in a different way, from the itunes panel where I can click to start the update, instead of saying yes when asked if I want to update when itunes launches in response to the iphone being plugged into the computer.

HT4623 when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

when i trying to update my iphone 5 to latest ios 7.04 always appeared error when the update almost done about 20 to 30 minutes

Hello micojen1920
If you are having an issue with updating your iPhone, try it through a different method like in iTunes or through software update on your iPhone in settings. If that does not work then follow the steps in the article below to force a restore on your iPhone. Make sure to back up first and you can always restore from that back up once your iPhone is up to date. The second article will assist you with the back up and restore process.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Regards,
-Norm G.

Error when transfering specific songs from iTunes to iPod

Hi!
I am having this problem: When I am transferring new songs (manually)from my iTunes library to my iPod, I got a error message - my iTunes is in Spanish - which translated into English reads:
"Error when trying to copy in disk NAME OF IPOD. Unable to read nor write in the disk"
It happens with very specific songs, not all new songs but some of them. First I thought these songs were corrupted, however iTunes and WMA can plays them with no problem at all.
I have a 4G, 20Gb iPod, 1.79Gb free space, already installed latest iPod Updater 2005-10-12. Have no issues related to play songs on iPod.
Is there any other way to check if songs are not corrupted ?
Is this a problem related to my iPod ? Pls advise.
Thank you!

I'm still having the same problem. I tried everything, and unless there's a number to call Apple, I'm going to repurchase my music. I only buy it to play it on my iPod.

SCCM 2012 SP1 errors when downloading updates

Currently using SCCM 2012 SP1 with CU2 and I am having some update download issue with Automatic Deployment Rules.
The Environment is:
Server 2008 R2
SCCM 2012 SP1 CU2 (Upgraded from SCCM 2012 CU2)
I created an Automatic Deployment Rule for Adobe Flash. Since I was having the same issue with Adobe Reader, when I published via SCUP to WSUS I chose not to sign the updates.
After publishing to WSUS I then sync SCCM, I see the updates and then in the ADR I had it download the updates and I see this error:
Authentication of file C:\Windows\TEMP\CABDEC5.tmp failed, error 0x800b0004 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 3712 (0x0E80)
ERROR: DownloadContentFiles() failed with hr=0x80073633 Software Updates Patch Downloader 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download the update from internet. Error = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Failed to download ContentID 16845337 for UpdateID 16841530. Error code = 13875 SMS_RULE_ENGINE 8/15/2013 6:49:43 PM 6876 (0x1ADC)
Now the funny thing is if I go to the update itself within update group that Flash is a member I can right click it and choose download and the error doesn't occur.
I observed that the UNC path for ADR Adobe flash, when the rule is ran, is populated with folders that have a name something like 44738297895427890.1 or 423154325378u867234789.1. I have come to realize that those are failed downloads. So for the
heck of it I then right clicked the update itself and chose download and it downloaded without issue. Now I'm guessing that when I chose to download directly from the update maybe the system is getting the update from adobe and not from wherever the rule was
trying to get it from. I then see the .1 removed from the directory name and there are updates within them.
Just for clarity here are the steps I go through from SCUP to Syncing...
Log in to WSUS server
Run SCUP as administrator
Get notified there are updates from Adobe and let SCUP download updates
Find the updates the specify the following publishing options
Full Content
Sign all software updates with a new publishing certificate .... (Is this necessary by the way?)
Then click Next
After that's done I then go to SCCM Manager Console and go to Software Updates and right click to Synchronize them.
After that's done then I run the ADR for Adobe Flash and when it goes to download the updates that's when the error occurs.
What am I missing?
Also, while I wait for help I just recently added the WSUS SCUP certificate to the SCCM server to see if by chance that fixes stuff. If it does then I'll post the results of adding the certificate to the SCCM server.
One other thing, is there a way to delete updates? When I was having this issue in the past, I went in to SCUP I marked the updates as expired and then deleted the updates. Went to SCCM and synchronized the updates and they went from not expired to expired
then I waited, maybe 30 days or so before I could add the updates back in.
Thanks for the help!

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Have you seen the note at the bottom of this page about this error?
http://technet.microsoft.com/en-us/library/bb932193.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error when activating update rules for R/3 training and event management

hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D Krishna

Hi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23

IPod communication error when i updated iTunes!

I updated my itunes and now when i connect my iPod Nano to my computer this error message appears:
The software for communicating with the iPod is not installed correctly. Please reinstall iTunes to intall the iPod's software.
When I reinstall iTunes the same error message appears. I have also removed all of the software related to the iPod but to no effect.
Can anyone help me?
Windows Windows XP SP2

I'm also having the same problem since upgrading to the latest iTunes version 6.05. I've followed all the instructions for uninstalling and reinstalling ipod updater and itunes setup including deleting all temp files, diabling Norton Antivirus. Still get the iPod Service Error when launching iPod updater and the communication error in iTunes. I'm at a loss to the problem. My other PC with iTunes 6.04 reads the ipod just fine. Any other suggestions?

Error when i update my ipod touch to ios 6.1 from OTA

Hello, I have problem. When I update my iPod touch 5 Black from ios 6.0.1 to 6.1 on OTA, he didn't update, because i read error "Your disconnect internet". But I am have internet connection.
Sorry for my bad english

hellogreg wrote:
Yep. 5th gen is failing OTA and via iTunes (both Windows and Mac). I couldn't install 6.1 Beta 5 over the weekend, and now the final version fails -- when trying to restore or update -- too.
Many devs were mentioning that 6.1 wasn't installing on 5th gen Touches over on the iOS dev forums, but Apple released it today anyway. Weird. And not good.
Not user error. Apple's screwed something up here...
Well that's not good

FRM-92101 error,when i update the PLL file.

when i update the pll file,the form of called the pll wasn't open,FRM-92101 error.
i must recompile the form, then it can open.
why ? how can i resolve this problem?

Hi,
I think that this has to do with the PLL signature. If you only update the content of an existing pll file then this should go without. If you change the signature (e.g. method arguments or method number) then this has an impact to the internal structure,
Frank

Error 50 when i update songs

Similar Messages

Maybe you are looking for