Error -50 when sharing a project

I get this error message when sharing my iMovie project:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured (-50)
I've tried saving to a different location on my HD, I've tried reducing the res (I tried the three highest res as this is for a tv monitor) of the exported movie, I've repaired permissions. I exported this projecet perfectly the first time I made it - I need to change one thing in it and now get this!
I'm using the friendship movie trailer theme on iMovie 11 (9.0.4), OSX 10.6.8 on a MacPro 2.66ghz Quad-Core Intel Xeon with 16gb RAM and 3x1.5tb internals

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

Similar Messages

I get an error flag when sharing a project with youtube

I get an error flan when trying to upload an imovie to youtube.

Is this a video you Shared out of iMovie to the desktop then uploaded through the YouTube website? And which version of iMovie are you using now? If you go to the iMovie Menu > choose About iMovie and report back the version number listed there.
iMovie '11 will be version 9.x.x
iMovie '09 will be version 8.x.x
iMovie '08 will be version 7.x.x

I keep getting an error message when sharing iMovie Project to iDVD.

the message I keep getting (after waiting for the agonizing time to render it) is either (-108) or (-50). It is aggravating when it gives NO description of what needs fixed. how do I find the codes to fix my project?

The error message says, “An error occurred while trying to access the service. I have a PC with Windows 7, I don’t know if the PDF was created in Adobe, the document contains text and tables.
I had this problem before when I logged on to the Adobe website and tried to concert a document from there. The person who helped me then was unable to figure out why I was getting the error message. He told me to open the Adobe reader and convert the document from there. That has worked until now. I tried to logon to the Adobe website and convert from there, but get the same error message.
Any help you can provide to resolve this issue is greatly appreciated. The Adobe converter has been extremely helpful for our Department and I would hate to not have this valuable tool.
Thank you,
Suzanne
Message was edited by: StacySison

TS1165 When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry

I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work.

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

IDVD error message when sharing from imovie

1. When "sharing" from imovie to idvd, error message appears reading: "unable to publish project due to error-41."
2. Successfully "shared" once, with the first clip upside down.
Thank you for your insights.

Hi
Most probably it's the Start-Up/Boot/Mac OS hard disk that has less than 5Gb free space.
To let iDVD run OK - This Start-up hard disk should have 25Gb or more due to that
Your Mac is running a sort of UNIX (Mac OS) and this makes Mac OS and iDVD to use
lot's of temp files - AND they can not be addressed to any other hard disk at all.
More RAM - will not help
External/Second hard disk will if You first formatte it as Mac OS Extended and
move material over to this (or use it as Start-up hard disk)
External Start-up hard disk must be FireWire - NO USB2 will do this.
Must be Mac OS Extended formatted
Western Digital - My Book Serie - Can't do this.
My Lacie - works gladly as secondary start-up hard disk.
Yours Bengt W

I get an 'error occured' when saving a project after pasting text from Photoshop CC

I get an 'error occured, restart Edge Animate' when saving a project after pasting text from Photoshop CC. If I manually type the text its fine.

when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message?

Error when sharing imovie projects.

Hi all,
I'm using OS X 10.9.4 and iMovie 10.0.4. None sharing option is working for me. I always get this:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
Tried to google for an answer but nothing.
Hope you can find it out, please.
Cheers,
Pedro

Get the camera connection kit to share video.
But I believe you cannot share projects without a computer.
I got the camera connection kit and it is perfect for the situation you describe.
You can grab photos and video from other cameras including the iPhone.

Premiere Elements 8 error message when poening a project.

When I open a project in Premiere Elements 8 I get the following message, Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save you current project. I tried to uninstall and reinstall Premiere Elements 8 but I still get the same message. Any idea what is causing it?

kefaperformance
Is this a "it worked before but not now" type issue or "it never worked" issue?
Then the usual drill for those who are running Premiere Elements 8
a. Are you running Premiere Elements 8 as the 8.0.1 Update?
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
b. Do you have the automatic Background Rendering and AutoAnalyzer features turned OFF?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General
For AutoAnalyzer, see Elements Organizer workspace, Edit Menu/Preferences/AutoAnalyzer Options
c. Do you have the latest version of QuickTime installed? Are you working from a User Account with Administrative Privileges? Where are the Scratch Disks directed to and how much free space is at that location?
Then there are the specific questions (some already asked)
Properties of your source media
Project Preset
Computer Resources, including video and audio card driver updates
Let us start here and then decide what next.
Thanks.
ATR
Add On...if any of your issues involve opening an existing project, you might want to explore the damaged project side of things as per the following Adobe document
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-projects-premiere-element s.html

Getting error 25004 when installing MS Project 2013 Trial edition on Windows 8

I am trying to install the trial version of MS Project 2103 on my Windows 8 laptop. When I try to activate my key, I get error 25004. It thinks that I have another trial version on my computer. I un-installed my office 2010 (the only Office installed on
my laptop) and tried un-installing and re-installing Project and when it comes to activating the key, it give me the same error message. Somehow, it thinks that I still have another trial version on my computer. Any help would be greatly appreciated!

Pls try fixit tool here at: http://support.microsoft.com/fixit/
Also this article contains some relevant information: http://www.pallareviews.com/2997/office-2013-error-25004-fix/

"Multiple Validation errors" message when creating new project in FCPX

As a test I have now managed to change the file format from older quicktime file to .m4v and import into FCPX. I had to use Handbrake to change the file format to .m4v. If a free software can do this then why can't the $300 FCPX - and allow me to import directly? This would save me MANY hours of extra work!
But then, when I try and edit this - first trying to create a new project I get the message "Multiple validation errors occurred" The same message even if I try and custon settings rather than use the default
Does this mean that after all the work and hours it took me to tarnscode the file format, import and then render etc - I will be unable to use FCPX - to edit this footage?

Update on trying to create a new project - and getting "Multiple Validation errors" message
I quit FCPX and tried to use iMovie to make a clip to send to you. Decided against this - and so I opened FCPX again
To my surprise there were now over ten projects - as every attempy had appeared! This is bizarre - why did they not show up when I tried to create them first?
So, I had to delet most and just use one. This appears to be working as a project and is allowing me to edit clips into it.
It will be a reall bummer though if I have to do this every time I need to create a new project!

Error happened when deployed my project in JDev 11g!Help!!!

First I ran the project successfully, then when I ran it again, error happened and other project had the same error. I found solution in forum that delete the file "system11.1.1.0.31.52.05" in the install path of JDeveloper 11g, but this needs to close the Jdev . It is so inconvenient.
Who would like to tell me how to fix it except above solution?
The following is the error message:
java.lang.RuntimeException: java.lang.NullPointerException
     at oracle.jdevimpl.deploy.common.ModulePackagerImpl.deployProfiles(ModulePackagerImpl.java:88)
     at oracle.jdeveloper.deploy.common.ModulePackager.deployProfiles(ModulePackager.java:63)
     at oracle.jdeveloper.deploy.common.ModulePackager.deployImpl(ModulePackager.java:52)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deplo... [Show more]

I seem to have the exact same error, as you can see below..
Funny thing is, I was also able to run the application without any trouble.
From one moment to the other it gave this error.
Is there someone who knows the way to fix this?
My error message:
#### Deployment incomplete. #### Jun 24, 2009 4:15:03 PM
java.lang.RuntimeException: java.lang.NullPointerException
     at oracle.jdevimpl.deploy.common.ModulePackagerImpl.deployProfiles(ModulePackagerImpl.java:88)
     at oracle.jdeveloper.deploy.common.ModulePackager.deployProfiles(ModulePackager.java:63)
     at oracle.jdeveloper.deploy.common.ModulePackager.deployImpl(ModulePackager.java:52)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365)
Caused by: java.lang.NullPointerException
     at oracle.ide.net.URLFileSystem$TrackedOutputStream.flush(URLFileSystem.java:2332)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at oracle.jdevimpl.deploy.stripe.MonitoredOutputStream.flush(MonitoredOutputStream.java:84)
     at java.io.FilterOutputStream.close(FilterOutputStream.java:140)
     at oracle.jdevimpl.deploy.stripe.MonitoredOutputStream.close(MonitoredOutputStream.java:89)
     at oracle.jdevimpl.webapp.jsp.libraries.wl.WebLogicDeployerListener.prepared(WebLogicDeployerListener.java:146)
     at oracle.jdevimpl.deploy.fwk.ListenerSupport.firePrepared(ListenerSupport.java:178)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.prepare(AbstractDeployer.java:78)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:430)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.deploy.common.ModulePackagerImpl.deployProfiles(ModulePackagerImpl.java:82)
     ... 26 more
#### Cannot run application BrowseEditApp due to error deploying to DefaultServer.
[Application BrowseEditApp stopped and undeployed from Server Instance DefaultServer]

Error message when opening current project/sequence error?

Hi!
So I'm working with a project, a very simple timeline with vids transcoded to cineform codec. Everything is working beautiful. But every time I open the project to continue working on it, it shows me a strange error message that won't allow me to open my project. Is very stressful. I have to try many times until suddenly it opens the project. I always try to open it from all possible ways (double clicking on the project, from Premiere directly, etc) and is always the same issue. Until after many attempts it decides to open it. Does anyone know what's going on? This is the pop up message:
Thanks so much for the help.
Elaine.-

Here is a link that talks about this error message. It may help you to find an answer
Features and Sequence Presets missing | Adobe Premiere Pro CS6

Keep getting an error message when opening a project.

When I try to open a project, a box pops up sayin the project appears to be damaged and cannot be opened. WHat can I do to open my project? Why am I getting this mesage?

popto
Apparently you started this question here in another thread around June 29, 2013 and never followed up on direct questions that would have helped us help you at this time.
http://forums.adobe.com/thread/1244744
I would encourage Hunt to close this thread (I do not have the authority to do that), and have you continue in the thread that you started already. Steve Grisetti, Hunt, and I had all posted in that thread and were waiting for the requested information, Steve Grisetti first or all of the requested information at one time.
Thanks.
ATR
Add On...A good look at the original thread seems to indicate that both Steve Grisetti and Hunt suggested the AutoSave try at that time. Did you ever do that? Apparently Hunt is requesting the same AutoSave look again in this thread.

Error -50 when sharing a project

Similar Messages

Maybe you are looking for