Error -5000 on my 3GS when trying to upgrade to ios 5?

When trying to upgrade my iphone 3GS it keep saying there is error -5000 and if I continue with the upgrade all my infomation will be deleted from my phone, does anyone know what I can do to not have this error? Thanks!

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Similar Messages

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings?

When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??

Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO

When trying to upgrade to IOS 6 I recieve a error message "an error occurred while backing up this Iphone (-5000) I have deleted and reinstalled I tunes and that did not help.

When trying to update to IOS6 i receive a error message that reads "an error occurred while bakcing up this iPhone (-5000). I have deleted and reinstalled Itunes on my PC. I have Windows XP. My current IOS is 4.3.1

Check the "More Like This" section to the right for similar issues and possible resolutions.

I have Iphone4 Factory-unlock from Etisalat (Dubai-UAE) and when trying to upgrade my IOS to 4.3.3 it always gives me error -3259 (err=-3259), any help. (F.I: My current IOS4.3 and Itunes 10.2 are all orginal from Apple)

As mentioned, i bought this phone from Etisalat (Dubai-UAE based operator) and i never face a issue perviously on updating an IOS, this time after downloading IOS 4.3.3 I always get a error (it says Network issue) with Number Err= -3259 and never lets me update the IOS on my Iphone 4. My Iphone is completly original (Meaning, not jail breaked) and its using Itunes 10.2.2. The reason i want to update is becuase after updating the current installed IOS (4.3.2) the battery life is really bad and when i want to restore my Iphone4, it wants to download the updated IOS software (4.3.3) and when trying to update its gives me error all the time and does not let me update or install it.
Any help and update on how to fix this issue.

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Error 1654 when trying to upgrade to IOS 5.

Get the same error when teying to upgrade my iphone and ipad2 to IOS5, The error is 1654. What do I do to correct this problem?

I got the 1654 error when trying to update both of our iPhones via USB to iTunes. It took a few tries, but eventually, this procedure worked. I let everything sync and imported the photos/videos that hadn't been imported to date. Then I shutdown iPhoto and iTunes. I restarted them and as soon as the iTunes window came up, I plugged in the iPhone. I was then able to update without doing a restore.

Error "907 invalid COD" occurs when trying to upgrade my Blackberry App World.

Hi there. My name is Molopi Mashinini and I'm using a Blackberry Bold Touch 9900. My problem is that I'm struggling to upgrade my Blackberry App World, before it downloads the application, it gives me a message saying that there's a module that already exists on my phone and that its going to be replaced. When the downloading process get to the end at 3137kb, it gives me an error message that says 907 invalid COD. Now I don't know what to do because even the Blackberry Application icon doesn't give me an option to delete it. Please help me because I can't even download or upgrade the applications on my phone.

timmyKLB wrote:
I'm still getting the same error message when I try to download the application and I still can't delete the application from my phone because it doesn't give me an option to delete it.
Yes, I think we've discussed that more than once.
timmyKLB wrote:
I tried all the step you gave me. Nothing seems to be working.
And I still cannot tell exactly what that means (refer to the first half of post 6 above).
timmyKLB wrote:
My main problem is that under the application list, I can't find the delete option for the application on the menu button.
Yes, we've discussed that as well a few times. Yet you have left me completely in the dark regarding how the use of the Desktop Software worked out.
timmyKLB wrote:
I'm even thinking of giving up because I followed all the steps but I just can't seem to delete the application.
That would be a choice only you can make. It would so greatly help me to help you if I could understand your situation better, most especially the precise results of the things I ask you to try. But, your responses continue to be so very general and vague, with multiple interpretations possible from your words, that I cannot understand how those things work out. Consequently, I am at a loss as to how to help you. I need to understand in order to help you, yet your words do not help me to understand, no matter how many times I seem to ask you for clarification. So I am even more lost than you are.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?

Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
Thanks

iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Keep getting error -5000 when trying to upgrade to ios5 on iphone 3GS

Keep getting error -5000 when trying to upgrade to ios5 on iphone 3GS

+error message 2378+
That typically indicates a problem with your VBScript. See the following troubleshooting article:
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)
(The Vista instructions are down at the bottom of the document.)

HT201210 I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?

Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS.

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph

NOTE: This IS a duplicate post from the Breakpoint. Text slightly changed. The post in Breakpoint can be deleted. All comments should be placed in this thread.
I resolved the "Fatal Internal Error: "image.cpp", line 13192 when trying to insert a cursor to graph", but would like to share to find out if others have seen this and to determine whether this is a bug, or if it's time to redo my PC, or buy a new one..
I have an existing graphs (qt 6) which originally had 2 cursors. This occurred while trying to add the third cursor.
Up until attempting to add the last cursor, the program worked great, and I had been running tests for a while. However, I do recall seeing this problem when creating the original cursors, but not to this extent. Plus I don't remember the original error message from that time.
I needed to add one more cursor to the existing graphs. As soon as I add a new cursor and set it's properties, I get a nasty error message and without warning LV8.2 simply closes itself (well, the only warning was the error message. Tried it 3 times, same result.
Here are the steps:
Shut down the PC, went for a coffee, rebooted the PC. Opened the LV project, opened the VI. Immediately went to the graph properties to add the new cursor by doing the following steps:
Right click graph indicator icon on block diagram.
Select Properties.
Click on cursor tab.
Click on Add
Select Cursor 2 (3rd one, newly created)
Change color
Select cursor as a line
Remove checkmark for "show cursor"
Click OK
I need to do this to 3 other graphs, same steps. And as soon as I get to the step before clicking OK, I get the error message.
I managed to get an additional one done, by immediately saving after each step (yep going in & out of the properties). But I've had this problem before when creating the first two cursors.
Is it a bug? Anyone else seen this? Using LV8.2. And the message is right about LOOSING ALL unsaved work!!!!
Here are more observations:
Tried creating a new one on the second graph. As soon as I clicked on the color, it crashed!
See the error explanation below. It is really clear, now anyone can solve it    LOL!!... According to the error log, there's a bad image out there
.\manager\image.cpp(13192) : DAbort: bad image in ValidateImage
$Id: //labview/branches/Europa/dev/source/manager/image.cpp#47 $
0x007A81E8 - LabVIEW <unknown> + 0
0x007A7BDB - LabVIEW <unknown> + 0
0x00829D74 - LabVIEW <unknown> + 0
0x008546CD - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0081B9C8 - LabVIEW <unknown> + 0
0x0081EB9A - LabVIEW <unknown> + 0
0x0084D9D4 - LabVIEW <unknown> + 0
0x00854663 - LabVIEW <unknown> + 0
0x00C054E6 - LabVIEW <unknown> + 0
0x0085F7A1 - LabVIEW <unknown> + 0
0x00BBACDD - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
0x0085AA46 - LabVIEW <unknown> + 0
0x00C06A2F - LabVIEW <unknown> + 0
I observed the title bar after making changes to the properties. I noticed that 3 out of 4 times, while changing the properties of the graphs to include the cursor, and saving after each & every step, that there were no stars appearing on the title bar to indicate "unsaved changes". Saving was also much slower than usual. I suspect, the program never got to placing the star before saving occurred. However, I am noting everything.
After creating the cursors, saving was and is normal, and the program runs well..   I have run tests without problems.
Does anyone have a clue at what causes this? Has anyone seen this before?
Thanks,
RayR

Hi Donovan,
I can't remember seeing this elsewhere. When I get a chance, I'll create a new (blank) vi with new graphs and will repeat the steps.
I will let you know if I see this in the new vi.
Thanks!
RayR

HT201210 When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid

When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?

Temporarily disable any security software on the computer and try again.

Why when installing Adobe Acrobat XI Pro do I recieve install error 1328 ? Does same when trying to updateas well. How can I fix this?

Why when installing Adobe Acrobat XI Pro do I recieve install error 1328 ? Does same when trying to update as well. How can I fix this?

Moving this discussion to the Acrobat Installation & Update Issues forum.

ERROR (0×0107, 0×0000) WHEN TRYING TO VIEW A VM CONSOLE

Hi,
Getting error (0×0107, 0×0000) when trying to view vm console via vmm installed on a machine registered to different domain.
When tried to connect to the VM it will be asked to authenticate against the host and then we will see a warning about an un trusted certificate
and once we click OK we will receive the (0×0107, 0×0000) message.
Tried importing certificate of the hosts to the Trusted Root still seeing the same error. Can anyone please help?

Hi sathish777,
Because each domain has its secure boundary ,domain trust is needed for comunication between different domain .
As a workaround , you may try to logon the "client" locally to be a workgroup machine then use hvremote.swf to manage the hyper-v server remotely :
https://code.msdn.microsoft.com/Hyper-V-Remote-Management-26d127c6
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error -5000 on my 3GS when trying to upgrade to ios 5?

Similar Messages

Maybe you are looking for