Error -50103 occuring in one program, but not occuring in another similar program

Hello,
I'm a new user of LabView and I'm trying to figure out how a part of this programming process works. Anyway, the block diagram of the working program consists of the first two pictures (C:\Users\Labview\Pictures\errorsetupnew1.jpg -and- C:\Users\Labview\Pictures\errorsetupnew2.jpg). The parts in question are the DAQAssistant9 and DAQAssistant12 in the lower half of the diagram. When I run the program, everything goes fine.
So now I'm trying to run two other programs that both share the same properties as these two DAQAssistants, but they are in two separate programs. When I run one program, it works, but when I run the other program, Error -50103 occurs at DAQmx Control Task.vi:10. Pressing continue yields Error -50103 occuring at DAQmx Read (Analog 1D Wfm NChan NSamp).vi:3.
So my first attempt at solving it was to consolidate it into one program and run it all together, however the same error shows up. I isolated the two While loops which seem to be causing the problem into a test program (third picture) and the error occurs there as well.
My question is what is different from the program in the first two pictures that is allowing the program to run correctly and the test program (which can be extended to the program that I need to work).
I'm new, so please let me know how many beginner mistakes I might be making here!
Thanks
Attachments:
errorsetupnew1.jpg ‏137 KB
errorsetupnew2.jpg ‏113 KB
errortest.jpg ‏82 KB

I'm not currently at the computer with the files in question, but what if I attached those instead when I got the chance? The problem is that I don't believe I am using the same DAQ resource in two different tasks. The command line runs correctly in one, but can not run in the other even though the part giving the error is just a copy of the other program.
I'm trying to run through the previous posts about this particular error but the LabView lingo is something I'm still getting used to. Thank you for bearing with me and helping.

Similar Messages

My ipod is showing as corrupt on one computer but not corrupt on another computer

My ipod (5th gen classic) was working fine. I connected it to my desktop where i store my library but it showed as corrupt. I restored it as per suggestion but it still says it is corrupt. When I connect the same ipod to my laptop itunes recognizes the ipod and asks me to go through the new ipod set up steps. Why is one computer saying ipod is corrupt and the other computer is not?
I have tried bypassing the usb hub on my desktop and connecting directly to the usb card, but that did not work. I also went through the 5 R's twice but still does not work.
I also tried changing the drive letter for the ipod as per another article I found on line but that also does not work.
I could use my laptop if I could import my music from my media server to the itunes library on my laptop but itunes does not recognize the media server as a disk location. My music appears under Shared...but cant sync shared to my ipod (at least I don't think i can).
If anyone can help that would be great.
Thanks.

So you are plugging your iPod into a high powered USB 2.0 port that is directly located on your PC's motherboard?
My suspicison is that is somesort of driver or software conflicts with iTunes your iPod that is causing iTunes to not properly recognize the device. Have you tried removing and re-installing all Apple related software? Use the instructions in this article to walk you through the process.
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
There is a link in that same article in case you have Windows Vista or 7.
It wouldn't hurt to also check and make sure all the BIOS, firmware, drivers, and chipsets are up do date on your system.
B-rock

Same mp4 video plays fine from one drive but not recognised from another??

Everytime I drag and copy my MP4 video files from my internal drive to an external one, it then no longer plays from the external drive. The external drive is working fine, and if I render the video directly to that drive, it previews and plays fine. This only happens to MP4 files I copy from internal drive to this external drive
Something seems to happen to the file when I copy and paste it or drag and drop it.
As I drag it I and when it lands in the folder I copied it to, the preview thumbnail is here for a split second, then switches to a regular QT icon - when i try to open it, it then says file format not recognised - even though the exact same file plays fine from the original location on my internal hard drive
This is driving me mad - any ideas - must be something simple?
Any help really appreciated

I used MPEGStreamClip to transcode the audio file to AIFF (over 1500 kbs @ 48khz) with better results. With the iTunes volume set at full and with the volume adjustment option set at 100% (which is 50% above flat), the AIFF file played through iTunes, produces about the same decibels as playing the file through VLC with the VLC volume at full.
Thanks much for your help.
I believe some of the problem is with the original file being a bit too quiet to begin with. Putting it into analog terms, it's kind of like a 1 watt pre-amp signal when it needs to be a 4. Do you know of a way to increase the audio output level through the cable box fire wire port so it can be captured at a higher audio level to begin with?

"No connectivity with the server" error for one document but not the other, in the same document library

We have a number of users all of a sudden getting "No connectivity with the server. The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
just by clicking the link and selecting the "Read Only" option. If they select the "Check Out and Edit" option, they can open the document no problem. One of my customers gets the error on one document but not the other, in
the same document library! The older document (a weekly report) was copied and renamed as per standard procedure. She can read the older document, but not the new one.
It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error. We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
created profile does not experience the error for these people. Renaming the profile back restores all their personal settings but the error reappears. When we copied the old profile's folder structure into the new profile, many of the user settings
were restored (but not all, like Dreamweaver settings) but the error did not appear. We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy. We are rebooting between
logons to make sure all files are unlocked.
The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
2005 SP4. SharePoint is 64bit MOSS 2007 with the latest CU.
We've checked the logs on the client as well as on the server and there aren't any helpful entries. We've also run Process Monitor, also with no helpful entries. We're planning to run something like Fiddler next.
It's not everyone, because there are many people are accessing the SharePoint system and the same files. It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes. One person experiencing
the errors is a Site Collection Admin. That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file. They were able to open it Read Only no problems that day, but the next day, the same
file gave them an error. In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
We've tried lots of things including:
Deleting IE cache
Deleting SharePoint Drafts and webcache folder contents
Running IE without add-ons
Upgrading and Downgrading IE
Uninstalling and re-installing IE
Reinstalling our SSL certs
Repairing Office
Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool
Deleting all HKLM and HKLU Office registry settings
Toggling IE Compatibility Settings
Toggling the IE Automatic Logon option
Toggling the location of checked out files
Adding the site in the trusted sites list
Adding the site to the WebClient\Parameters registry locations
Making sure the WebClient service is started
Rebooting the machine (lol :)
This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing. There aren't
"check out" workarounds for some of those macros.
We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next. Thanks!
-Richard.
PS I think this needs to be in the "General" forum instead?

It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes. It helped tremendously that my own machine was throwing the error. I have scheduled a couple of users to work with me to test the
various fixes, to see which one works best, so the story isn't over yet.
I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done. I made a copy of the profile folder and was using that for awhile,
but then made another copy where I had deleted a lot of content out of it so that the copies would go faster. Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
to get back to work. Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore. The concept was to keep as much as the users profile
in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error. I then tried xcopy, but got the "can't read file" error. Then I tried robocopy, and ran into the "junction" problem.
I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
So the process went as follows:
Reboot and log into the machine as another user
Delete the profile and associated registry key
Reboot and log into the machine as the affected user, creating a new profile, and there is no error
Reboot and log in as the other user
xcopy the contents of the skinned-down backed-up profile to the newly created profile
Reboot and log in as the affected user, and the error occurs
Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring. That was strange, because we've cleaned out the cache folders
before which didn't fix the issue.
So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
One way to do this was to:
Reboot and log in as another user
Rename the c:\users profile folder
Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
Reboot and log in as the affected user, confirm that there is no error
Reboot and log in as the other user
Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
Delete new profile folder, and rename the backup to be the production folder
Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
Reboot and log in as the affected user, confirm that there is no error
We've tried this on a couple machines and it works. I had to run Windows Explorer as Administrator to access the other profile's folders.
We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
We may attempt to script this, but the self-help instructions are only 5 lines long:
Reboot and log into the affected computer with another account
Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
Run Windows Explorer as Administrator
Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
Reboot and log into your normal account, and confirm the error is gone
I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

On one PC but not another I am getting an error message: Exception: java.la

There is an applet on my site which is not loading for some users and not others.
On one PC but not another I am getting an error message: Exception: java.lang.ClassNotFound.Exception:CheckboxApp.class
The name of the applet is CheckboxApp
some other user of my site are also getting similar messages
Is there something from sun that can be downloaded by the users or is there some problem at the server level?
Thanks

It's probably because of the way the html that's calling the applet is coded, in conjunction with the vendor (Sun or MS) and version of the Plugin/JRE. This will help you ger started with diagnosis:
http://java.sun.com/products/plugin/

Nothing will print. My printer works with every other program, but not this one!

Nothing will print. My printer works with every other program, but not this one!

I see the printer, in blue when I click on the hardware tab. Actually there are 2 things listed that have to do with the printer.
The first one is called:
HP Photosmart Prem C410 series (DOT4PRIN.... and under the Type it is listed as IEEE1284.4...
The next is listed as:
HP Phototsmart Prem C410 series and under the Type heading it says Printers.
I don't know which one to pick. So when I choose the name highlighted in blue, what do I do to change the name?

Implicit read with assembly module instance working on one computer, but not another

Hi,
I'm trying to set up an on-site computer to run a VI which uses assembly instances for data communication, but for some reason I'm unable to establish a connection to the PLC.
I'm running the example vi "CreateAssemblyInstance.vi" to try and get the communication set up before I start using my actual program.
When I run this code on my development machine, I'm able to establish a connection to the PLC and read data. I then go into RSLogix 5000 and change the IP address to the on-site machine and try to run the test VI there, but I'm unable to make a connection. LabVIEW-side, the program thinks that it's established a connection and is reading/writing data, but PLC-side I'm getting a "Connection Failed" message in RSLogix.
I find it weird that LabVIEW thinks the connection was established just fine, which the RSLogix says it can't connect to the VI.
Just wondering if anyone else has had this happen. We aren't sure why the same VI runs on one machine but not another. We used RSLogix to change the IP address of the target machine, so we don't think that's the issue. And both computers are on the same network, so we don't think it's a firewall issue either.
LabVIEW-side, things should be identical. I'm running the same example VI that came with the Ethernet/IP module. PLC-side, we're changing the target IP of the module within RSLogix 5000 (and we're sending the updated information to the PLC) to match the machine we're trying to make a connection with. Are we missing any steps? This is the first time we've tried using an assembly module, so we're having a hard time troubleshooting.
Any ideas on why this is happening?

I'm pretty sure we're using a generic ethernet module:
I can communicate explicitly with the problem computer, it's able to use 'Tag Read' and 'Tag Write' to communicate with the PLC.
We started having another problem just recently too. The Tag Read and Write commands are almost always timing out. I keep getting the error message -251723752:
Detailed error info: Error -251723752 occurred at EthernetIP Tag Read REAL.vi;Details: The request response was not received in the requested timeout period Possible reason(s): Ethernet/IP Industrial Protocol: (Hex 0xF0FF0018) The request response was not received in the requested timeout period
I can't figure out what's causing this all of a sudden, could these issues be related?

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

Skipping songs
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2

Public Folders Permissions Tab Missing on one pc but not another

this has to be pc related but i just can't find any info anywhere. when i log into a pc and startup outlook and go to public folders, i cannot see the permissions tab on the folders at all. but if i go to another pc, same OS and office version, i CAN see
and edit the permissions on public folders! has anyone else run across this problem?
Exchange Server 2007
Desktops Win7
Outlook 2013

Hi,
Since the issue only happens to specific client, the issue should be related to client side. I suggest we can do the following method to narrow down the issue:
1. Start Outlook in safe mode(Start > Run >type “Outlook /safe”> Enter) to check whether the issue persists.
2. Perform a clean boot for Windows to have a try.
If the issue doesn’t happen in safe mode, the issue may be caused by any third-party add-ins. We can disable third-party add-ins one by one to find out the root cause.
If the issue persists in Outlook safe mode but not occurs after performing a clean boot, please disable the related third-party program in Windows to resolve the issue. For more information about clean boot, please refer to:
http://support.microsoft.com/kb/929135/en-us
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

I´ve installed Photoshop CC 2014 on one computer but when I should install the program on my other computer it ask for a serial number. Where could I find this?

Hi,
No serial needed for subscriptions.Your applications can't communicate with the activation server.
Check and delete Adobe entries on your hosts file as explained on step 3 :
Sign in, activation, or connection errors | CS5.5 and later

Songs playing on one computer, but not on others.

I use my iPod on three different computers (Home/Work/brand new laptop). I recently upgraded my iPod from original 80gb to new Classic 160gb. Before I purchased my new iPod, I transferred my whole library (about 50gb)from my iPod onto my new laptop(using transfer software). Then when I purchased my new iPod I synced the whole library to the iPod. The problem is that when ever I connect my iPod to my work or home PC some songs have an exclamation mark next to them (and they don't play). So when I went to replace the "exclamation marked" songs from the laptop (where the whole library exist), I had NO exclamation marks. So my question is why do the songs play on one computer but not the others? Please help!

It looks alot like the problem we had when we couldn't resolve the CUPS server FQDN. But the desktop and laptop are on the same subnet and use the same DNS servers. I can ping the CUPS server by FQDN from the command prompt on both
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:46,319 [0x00001394] WARN LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::RegisterWithNextProxy[2852] - Order of routing attempt: :5060(TCP)>. Attempting to register to
2010-02-11 14:57:46,319 [0x000016f4] INFO LCWabiSinks - (WABIMSG_REGSTATE6) ********* CUPS (@) (slot 0) REGISTER STATE: Registering... *********
2010-02-11 14:57:49,787 [0x000016f4] INFO LCWabiAccount - (WABIMSG_ACCTINFO) acct SLOT 0 - CUPS (@) (0x0186a368), instance=54, proxy=BC-IPT-UPS.:5060(TCP), reg=false, pres=true, SL=false, KPML=false, CiscoKeepAlive=false
2010-02-11 14:57:49,787 [0x000016f4] ERROR LCWabiSinks - (WABIMSG_REGSTATE11) ********* CUPS (@) (slot 0) REGISTER STATE: FAILED!! code=503, reason=Service Unavailable *********
2010-02-11 14:57:49,787 [0x00001394] ERROR LCIsuaLog - (WABIMSG_SDKMSG) CSuaCallControlManager.Singleton.Asynchronous::CProxyRegistrationHelper::onFailure[3561] - Failed to register! error-code: 503, msg: 'Service Unavailable'. Retry in 20 second(s).
I swapped out the username for and the domain with to protect the innocent. Or maybe the guilty; we will see. From the command prompt I can ping BC-IPT-UPS. and I get a response from the CUPS at the correct IP address.

"printer is offline" appears on one computer but not the other (both windows 7)

printer is offline" appears on one computer but not the other (both windows 7)

This is pretty common to see when your firewall kicks in and blocks certain communication paths the printer takes.
Here's a list of ports and programs that when allowed through the firewall, will restore communiction.
Ports to open:
UDP ports: 427, 161, 139
TCP ports: 9200, 9220, 9290, 9500
Programs to allow:
hpiscnapp.exe
hpoews01.exe
hpofxm08.exe
hposfx08.exe
hposid01.exe
hpqkygrp.exe
hpqste08.exe
hpqtra08.exe
hpznui01.exe
hpzwiz01.exe
SLP_Service (also known as UDP 427)
Have your security software provider walk you through allowing these items through your firewall.
If this does not fix your issue, it is most likely an issue with the driver configuration. Your router may have assisgned the printer a new IP address and this can be changed in the properties of the existing driver.

HT4367 Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Whenever I try to rent a movie, Apple TV buffers and does not come back. I am able to see other programs, but not able to rent movies. And the movie charge still goes on my bill.

Apple TV uses iTunes. The reason you can't rent through your ATV is because you can't rent movies through iTunes Canada. Sadly, as this is a user-to-user forum, no one here would know when or if rentals will come to Canada.

Call customer-subscreen causes dump in one box but not in another box

Hi guys,
Just wondering if anyone here encountered this situation before and knows of any explanation or solution.
There's two development boxes with a program that contains the following code/statement:
call customer-subscreen SSCR903 including 'SAPLXXXXXX' '2000'
SAPLXXXXXX happens to not exist in both boxes. In the first box, when execution reaches that statement above it will generate a dump saying that 'SAPLXXXXXX doesn't exist'. But in the second box, when execution reaches that statement above it won't generate a dump and execution continues to the next statement in the program.
I checked SAP documentation on the CALL CUSTOMER-SUBSCREEN keywords, but I didn't find anything that would explain why it dumps in the first box, but not in the second one.
Anyone encountered the same situation before? Any explanation why it's dumping in one box, but not in the other box?
Thanks in advance for any help.
Kind regards,
Carl

Welcome to sdn.
Abap doesn't check existence of the dynpro, it only check activation of the exit in CMOD, that may explain the, difference.
Regards,
Raymond

HELP!! WRT54G2 works for one computer, but not for the other

I have a WRT54G2 and it is connected to 2 computers. The internet works in one computer, but not on the other. The tech support said i needed to configure it or firmware or something like that. But my product is out of warranty and I really need the internet on the other computer as well. Please Help!!!

As your one computer is working fine then there is no problem with the router so far...
The computer which is not working...check the IP Address on that...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on O.k...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Error -50103 occuring in one program, but not occuring in another similar program

Similar Messages

Maybe you are looking for