Error 51 when posting IDOC to SD
Hello All,
We are changing our EDI translator which had a SAP extension automatically process the IDocs into SAP using ALE process.
I'm testing the new procedure scheduling a job to run RSEINB00.
The error I'm getting is (51 enter a numeric value) when posting an order in SD.
IDocs are created with the follow status.
50 - IDoc added
64 - IDoc ready to be transferred to application
62 - Direct call started
51 - enter a numeric value.
On the partner profile is set-up as Message type ORDERS process code ORDE and processing by function module is set to trigger immediately.
Is there something I'm missing?
I can get around this by reprocess the IDocs using BD87 Process Inbound IDocs' the orders are created.
This would be a manual process and something I do not want to do.
Please Help
Joan
Hi Nandu,
I'm not sure how to run BD87 in foreground mode. I did run BD87 using the debug mode.
The error is No batch input data for screen && - SAPM55430121 - Message no. 00344 and the diagnosis were:
The transaction sent a screen that was not expected in the batch input session and which therefore could not be supplied with data. The transaction behaves differently in background processing in a batch work process than when running in dialog (SY-BATCH is queried and changes the screen sequence).
I ran the same idoc using BD87 without the debug and it was posted.
I do not want to use transaction BD87 when we go live.
Is there a config that I needs to set up?
Is there something in the control record I'm missing?
Joan
Similar Messages
-
Error when posting IDoc *** in system ERP100
Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imreHi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan -
Error ki280 when posting a billing document
I am running into a ki280 error message when posting a billing document. This happens to be for a situation that includes a customer down payment, the error message is not encoutered when posting a billing document without the down payment interestingly enough.
The error message is below. Account 410000 is a revenue account, so is it looking for a type 11 cost element to be created?
Any information appreciated.
Create account 410000 for 02/11/2009 as a cost element in controlling area
HEES
Message no. KI280
Diagnosis
Account 410000 is a profit and loss account. You assigned it to an
object in cost accounting (for example, a cost center, order, or
project).
System Response
Account 410000 in the determined controlling area HEES must exist as a
cost element on the posting date 02/11/2009.
Procedure
o Create account 410000 as a cost element and then repeat your
posting.Hi,
Use T.Code FS00. Choose the account to be created as cost element and click for display. Now click the edit cost element tab. Screen will open for the GL account to be created as a cost element. Enter from and to dates like 01.01.2008 to 31.03.9999 and click master data. Choose category 11 after giving the text of the cost element and save. If you want that this revenue to be posted to a cost center you can enter in the default account assignment tab. Try to post the invoice again. If you have further problem revert back.
Regards,
Sadashivan -
Error message when posting invoice : Day-end closing not defined
Hi,
In our training environment we migrated from FAGLFLEXT to FMGLFLEXT and activated fund management.
Now when posting an invoice the system provides an error message: "FQ252 Day end closing not defined".
There is no configuration related to F845 but we are prevented from posting the document due to this error message.
Any idea of where this could come from and of what need to be done to prevent this from happening?
Rgds
SophieHi Sophie,
Can you check if you have entries in either PSO43 or PSO43USER tables (can be accessed via F8O2 transaction)?
Regards,
Eli -
Error when posting Idocs From XI to SAP by Partner Profile
Hi all.
i have a problem. all my inbound IDocs in R3 use PP(Partner Profile) LS_XID.
but i need to send IDoc MATMAS by a diferent PP (LS_MATERIALS).
So, i added a new BS in transaction BD54.
In transaction BD64 re-desing the Distribution Model as follow
SL_130 (R3 DES)
> LS_MATERIALS (XI)
|> MATMAS.
In transaction WE20 define the new PP LS_MATERIAL. In inbound table add the MATMAS IDoc. Later imust delete de MATMAS IDoc from LS_XID list. same as transaction BD64.
My problem is when send the MATMAS to R3. it is still using PP SL_XID, so IDoc get status 56 (EDI: Partner Profile Inbound not Available) in R3.
Why?? Any IDea??
Thanks & Regards
Rodrigo.Hi,
Please check the Logical system,Business system, configurations ,please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards
Chilla.. -
Error occures when posting a Billing Document to alt Reconciliation Account
Dear All,
When i try to post a Invoice, for a alternative reconciliation account, an error occures saying,
Reconciliation account 50300022 or short key 00 is not permitted
Message no. F5788
Diagnosis
The system checked the entry to see whether a reconciliation account exists with the number 50300022 and whether it can be entered here, or whether the first two characters of your entry '00' form a permitted short key. Neither of these options is applicable to your entry.
System response
Error message
Procedure
Enter either a permitted G/L account number or a permitted short key.
Please help me to sort the above.
Thank U
YasangaCheck in OBYR configuration.
For reconciliation account xxxx you have given special GL recon account for example 22222
Now you must see that the recon account xxxx has been assigned with a GL account 22222 or some other special GL recon. account as per your requirement.
If you change recon. account in master record , you are required to run F.5D.
Just my observation likes...
Edited by: balashowry raju on Sep 9, 2010 8:51 AM -
Error message when posting revaluation "deprecation not posted completely"
Hi Gurus
When I am trying to post revaluation to an asset, using AR29, I get an error message APERB027 "deprecation not posted completely".
I have run AFAB for period 01/2010 and the entry in TABA is correct.
Can any one help me solve this?
Thanks
GilHi
I am trying to post revaluation for 31.01.2010 (asset was capilized on 01.01.2010)
I have ran AFAR, and it didn't have any effect -
JAVA ERROR MESSAGE WHEN POSTING CHANGES TO OC4J
We are using Oracle9iAS v1.0.2.2.2a. From the Client we succed in
posting and commiting changes to our BC4J on the Middletier. The next time we
postchanges we get the following exeption on the OC4J AS:
oracle.jbo.DMLException: JBO-26080: Error while selecting entity for Styles
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:841)
at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:3839)
at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:2630)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.lock(StylesImpl.java:635)
at oracle.jbo.server.EntityImpl.setAttributeValueInternal(EntityImpl.java:1848)
at oracle.jbo.server.EntityImpl.setAttributeValue(EntityImpl.java:1790)
at oracle.jbo.server.AttributeDefImpl.set(AttributeDefImpl.java:1570)
at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:754)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setStyleName(StylesImpl.java:152)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setAttrInvokeAccessor(StylesImpl.java:446)
at oracle.jbo.server.EntityImpl.setAttribute(EntityImpl.java:680)
at oracle.jbo.server.ViewRowStorage.setAttributeValue(ViewRowStorage.java:903)
at oracle.jbo.server.ViewRowStorage.setAttributeInternal(ViewRowStorage.java:819)
at oracle.jbo.server.ViewRowImpl.setAttributeInternal(ViewRowImpl.java:948)
at oracle.jbo.server.ViewRowImpl.setAttrInvokeAccessor(ViewRowImpl.java:925)
at oracle.jbo.server.ViewRowImpl.setAttribute(ViewRowImpl.java:717)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.updateRow(RuntimeViewRowSetIteratorInfo.java:311)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.readPiggyback(RuntimeViewRowSetIteratorInfo.java:193)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readPiggyback(AbstractRemoteApplicationModuleImpl.java:2419)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.isTransactionDirty(AbstractRemoteApplicationModuleImpl.java:1788)
at oracle.jbo.server.remote.ejb.EJBApplicationModuleImpl.riIsTransactionDirty(EJBApplicationModuleImpl.java:2454)
at RemoteStylecardModule_StatefulSessionBeanWrapper6.riIsTransactionDirty(RemoteStylecardModule_StatefulSessionBeanWrapper6.java:12889)
at java.lang.reflect.Method.invoke(Native Method)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:80)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
## Detail 0 ##
java.sql.SQLException: ORA-01002: fetch out of sequence
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:184)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:241)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1477)
at oracle.jdbc.ttc7.TTC7Protocol.executeFetch(TTC7Protocol.java:779)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2336)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2462)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:435)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:375)
at com.evermind.sql.FilterPreparedStatement.executeQuery(FilterPreparedStatement.java:269)
at com.evermind.sql.FilterPreparedStatement.executeQuery(FilterPreparedStatement.java:269)
at com.evermind.sql.FilterPreparedStatement.executeQuery(FilterPreparedStatement.java:269)
at com.evermind.sql.OrclPreparedStatement.executeQuery(OrclPreparedStatement.java:47)
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBuilderImpl.java:629)
at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:3839)
at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:2630)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.lock(StylesImpl.java:635)
at oracle.jbo.server.EntityImpl.setAttributeValueInternal(EntityImpl.java:1848)
at oracle.jbo.server.EntityImpl.setAttributeValue(EntityImpl.java:1790)
at oracle.jbo.server.AttributeDefImpl.set(AttributeDefImpl.java:1570)
at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:754)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setStyleName(StylesImpl.java:152)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setAttrInvokeAccessor(StylesImpl.java:446)
at oracle.jbo.server.EntityImpl.setAttribute(EntityImpl.java:680)
at oracle.jbo.server.ViewRowStorage.setAttributeValue(ViewRowStorage.java:903)
at oracle.jbo.server.ViewRowStorage.setAttributeInternal(ViewRowStorage.java:819)
at oracle.jbo.server.ViewRowImpl.setAttributeInternal(ViewRowImpl.java:948)
at oracle.jbo.server.ViewRowImpl.setAttrInvokeAccessor(ViewRowImpl.java:925)
at oracle.jbo.server.ViewRowImpl.setAttribute(ViewRowImpl.java:717)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.updateRow(RuntimeViewRowSetIteratorInfo.java:311)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.readPiggyback(RuntimeViewRowSetIteratorInfo.java:193)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readPiggyback(AbstractRemoteApplicationModuleImpl.java:2419)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.isTransactionDirty(AbstractRemoteApplicationModuleImpl.java:1788)
at oracle.jbo.server.remote.ejb.EJBApplicationModuleImpl.riIsTransactionDirty(EJBApplicationModuleImpl.java:2454)
at RemoteStylecardModule_StatefulSessionBeanWrapper6.riIsTransactionDirty(RemoteStylecardModule_StatefulSessionBeanWrapper6.java:12889)
at java.lang.reflect.Method.invoke(Native Method)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:80)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
oracle.jbo.DMLException: JBO-26080: Error while selecting entity for Styles
at oracle.jbo.server.OracleSQLBuilderImpl.doEntitySelect(OracleSQLBilderImpl.java:841)
at oracle.jbo.server.EntityImpl.doSelect(EntityImpl.java:3839)
at oracle.jbo.server.EntityImpl.lock(EntityImpl.java:2630)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.lock(StylesImpl.java:635)
at oracle.jbo.server.EntityImpl.setAttributeValueInternal(EntityImpl.java:1848)
at oracle.jbo.server.EntityImpl.setAttributeValue(EntityImpl.java:1790)
at oracle.jbo.server.AttributeDefImpl.set(AttributeDefImpl.java:1570)
at oracle.jbo.server.EntityImpl.setAttributeInternal(EntityImpl.java:754)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setStyleName(StylesImpl.java:152)
at dk.bestseller.bestinfoII.purchase.stylecard.StylesImpl.setAttrInvokeAccessor(StylesImpl.java:446)
at oracle.jbo.server.EntityImpl.setAttribute(EntityImpl.java:680)
at oracle.jbo.server.ViewRowStorage.setAttributeValue(ViewRowStorage.java:903)
at oracle.jbo.server.ViewRowStorage.setAttributeInternal(ViewRowStorage.java:819)
at oracle.jbo.server.ViewRowImpl.setAttributeInternal(ViewRowImpl.java:948)
at oracle.jbo.server.ViewRowImpl.setAttrInvokeAccessor(ViewRowImpl.java:925)
at oracle.jbo.server.ViewRowImpl.setAttribute(ViewRowImpl.java:717)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.updateRow(RuntimeViewRowSetIteratorInfo.java:311)
at oracle.jbo.server.remote.RuntimeViewRowSetIteratorInfo.readPiggyback(RuntimeViewRowSetIteratorInfo.java:193)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.readPiggyback(AbstractRemoteApplicationModuleImpl.java:2419)
at oracle.jbo.server.remote.AbstractRemoteApplicationModuleImpl.isTransactionDirty(AbstractRemoteApplicationModuleImpl.java:1788)
at oracle.jbo.server.remote.ejb.EJBApplicationModuleImpl.riIsTransactionDirty(EJBApplicationModuleImpl.java:2454)
at RemoteStylecardModule_StatefulSessionBeanWrapper6.riIsTransactionDirty(RemoteStylecardModule_StatefulSessionBeanWrapper6.java:12889)
at java.lang.reflect.Method.invoke(Native Method)
at com.evermind.server.rmi.RMICallHandler.run(RMICallHandler.java:80)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
We are in the Client part on the application trying to postchanges to OC4J
aftet a succesfull commit when the exception is thrown.
//Check if any data changed and postChanges if true
if (styleCardModule.getTransaction().isDirty()) {
System.out.println("styleCardModule.getTransaction().postChanges()");
styleCardModule.getTransaction().postChanges();
The module works ok if we instead of commiting changes do a rollback.
Our BC4J are generated with JDeveloper 9i RC2.
The application (BC4J) works fine when running on JDeveloper 9i RC2.
Anyone got a solution to this problem?Yes. I believe that there is an internal plug-in installed / script programming active that does something which requires Java.
You could look up the definition of the Structured Application which is used for those XML files to check if a "structure client" is defined.
But it has nothing to do with FrameMaker as shipped by Adobe.
- Michael -
Friendly java error stack when posting reply
When trying (twice) to post a reply I get this:
Re: forum isqlplus
An error in the system has occurred. Please contact the system administrator if the problem persists.
type: java.lang.IllegalArgumentException
java.lang.IllegalArgumentException: Parent key 2068967 not found when adding child 2068965.
at com.jivesoftware.util.LongTree.addChild(LongTree.java:99)
at com.jivesoftware.forum.database.DbTreeWalker.addChild(DbTreeWalker.java:233)
...(To see if I can reply to myself.)
-
BBM Error Date when Posting Picture to Group
Hi,
I'm facing a strange behavior on one of my Group, let say Group A.
When I'm posting a picture to this group the date always set to 01 JAN 2080,
but at the same time when I'm posting the picture to another group, the date is correct
as today's date.
Hope someone will help me to solve the above problem.
Thanks.This is because someone in that group has changed the date in his/her blackberry to 01 JAN 2080 and send a picture in the group. When this happens, pictures sent after that will get dated as 01 JAN 2080. I know why this error happens but I don't know how to correct it.
-
Did you meet error AM840 when processing IDocs of BP?
Hi,
When I process IDocs of BP, there is a popup which said "Database error deleting from table ADRCOMC MessageNo:AM840". I have searched Notes, but no useful information founded.
Do you know the cause of that error? How to solve it?
Thanks!
Best regards,
Longhi,
do you delete any address data for your business partner ?
try to check address adata from you IDOC
to see if it's correct
you can send an IDOC from your BP and check
if you populate the address data in the same way
Regards,
michal -
Did you meet error AM840 when processing IDocs?
Hi,
When I process IDocs of BP, there is a popup which said "Database error deleting from table ADRCOMC MessageNo:AM840". I have searched Notes, but no useful information founded.
Do you know the cause of that error? How to solve it?
Thanks!
Best regards,
LongHi Sudheer,
Sorry, I made a mistake. You are right. The problem is because that some records of communication type are missing in table ADRCOMC.
Then I firstly check if it has missing data, then do processing.
Another question, currently when I usd Tcode: BD87 and select some IDocs when are not processed. If I click "Process" button, the program "RBDAPP01" should be executed and select the IDocs to be processed firstly. But at this step it often run exceed timeout. I looked at process via SM51 and found that when executing "Select * from BUT0TP...." statement, it needs very long time and then execeed timeout. Do you know why?
Thank you very much for your help!
Best regards,
Long -
Hi all
could not commit transaction error-1 during commit transaction ..........
the above error was coming, when I posting goods receipt po what may be the problem....
thanks
komanduriHi
check the note 1345316
Kind regards.
Agustí -
Error 500 when posting large form to windows azure from Android
I have a HTML page with a form containing a large (>1400 character) hidden field value, that will not submit on Android browser to any site hosted on windows azure websites. I have tested this on 4.1 and 4.2 on different devices.
I have checked the error logs from Azure and am receiving a 500 error.
The page will submit from all modern desktop browsers, and iOS devices.
Unfortunately I can not provide a link to the actual page, as it resides under our companies extranet, but if I point the target of this simple form to any Azure website (*.azurewebsites.net) from an android device, I get the 500 error.
<form action="http://*****.azurewebsites.net/" method="post">
<input type="hidden" name="imageData" value="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"
/>
<input type="submit" />
</form>
To further test this I created a brand new site on azure websites, leaving everything as default. No code or anything uploaded (so you get the "This web site has been successfully created" page). Posting the form to this site gives a 405 response
(as expected), except for android that gives the 500.
Is there a setting or something I am missing somewhere?
Following up, I have identified this event in the error log if this helps:
138. GENERAL_READ_ENTITY_END
BytesReceived="0", ErrorCode="The I/O operation has been aborted because of either a thread exit or an application request.
(0x800703e3)".Originally I thought it may have been a browser issue, so I installed the latest Chrome and Firefox browsers as well, which all respond the same.
This is on 2 separate devices, both modern hardware running Android v4.1 and v4.2 -
Error message when processing IDoc
Hi there,
Greetings from Buenos Aires, Argentina.
I'm trying to use the Migration Workbench in order to transfer to SAP the material master data.
I have created an LSMW Objet and selected, under Mantain Object Attributes >> Object Type and Import Method, the IDoc option. The message type will be MATMAS and the Basic Type will be MATMAS05.
I have maitained the IDoc Inbound processing, created the LSMW Port and the Partner Profile. In the latter, under Inbound Parameteres, I have created and inbound parameter with the MATMAS Message Type and MATM Process Code.
I have created structure relationships for the following target structures: EDI_DC40, E1MARAM, E1MAKTM, E1MARCM and E1BEWM.
After being one or two couple of hours going and coming over the application log after running over and over again the step 14. IDoc Processing, and having filled with '/' the obligatory fields, I still am not able to generate it successfully.
The problem I'm having is, it keeps asking the DISMM (I think the name is MRP Type) field, and since I have not created a conversion rule or source field for it, I recieve the error message 72 from the M3 message class
I understand that though the MM01 transaction, if the MRP View isn't activated, this field stops being mandatory. So I need to know, if any, the way to make the IDoc processing not to ask this field, since the MM consultant has said it's not necessary to introduce it.
Thanks in advance.in the step 5 Maintain Field Mapping and Conversion Rules
in the strcture E1BPMATHEAD put the below condtion
E1BPMATHEAD Header Segment with Control Information
for the MRP veiw WERKS and DISMM is mandatory fileds if you are not getting the any one of the value from the file ,skip the MRP view using below condtion.
MRP_VIEW Material Requirements Planning (MRP) View
Code: * Target Field: E1BPMATHEAD-MRP_VIEW Material Requirements Plann
IF NOT matmas-werks IS INITIAL AND "
NOT matmas-dismm IS INITIAL.
e1bpmathead-mrp_view ='X'.
ENDIF.
Maybe you are looking for
-
HELP, date class and parsing input
I have reviewed many posts in these forums and have found that detail gets the best results so I apologize in advance if this is detailed. I am taking a Java class and am not doing so hot. The last time I programmed was in 1998 and that was Ada, I ve
-
Hello to all! i am interested to make a query that will display the following data from oinv Invoice No Document Status Posting Date Due Date Customer/Vendor Name Document Total from payment means Payment Date Total does anyone know which is the tabl
-
JDBC connections using resource file
I have heard that a resource file can be used to assign an URL and DB2 driver to establish a connection. What is a resource file and how can this be done? We have several URL and DB2 drivers to assign depending on what server we are processing on. th
-
I'm running a SunFire v440 with a IBM 3584 tape library. Solaris 9 is the OS and Veritas NetBackup 5.1 is the App. Currently the IBM 3584 has LTO-2 drives in it and the backup team wants to upgrade to LTO-3 drives. They are planning on using the same
-
Screen Grabs - no iPhoto Preview
Hi There! I have just noticed a bug between the iPhone and iPhoto. Photos taken with the camera display a preview. Screen Grabs from the iPhone (holding the home key and clicking the sleep/wake button) have no preview in the import window however imp