Error 51 with VPN and 10.4.4
Hi: I've just upgraded both my OS and Cisco VPN 4.6.04 on my 12" PB. The new VPN worked fine on Panther but now gives me the following message whenever I try to start the program:
"Error 51: Unable to communicate with the VPN subsystem. Please make sure that you have at least one network interface that is currently active and has an IP address and start this application again."
I am using Airport Extreme base station.
Can anyone please help me? Thanks.
PowerBook G4 Mac OS X (10.4.4)
I seemed to have solved my own issue. All I needed to do was to trash my VPN alias and re-create another. Although the alias had been less than 24 hours old, it had been created under Panther and, for some reason, didn't work with Tiger.
Similar Messages
-
Error loading with firefox and sometimes IE
Hi experts,
I published about 250 AW 7 learning objects and got a
frustrating feedback of my students. Most of them are using firefox
and got a red bar with "error loading" without more information.
Other students got errors like missing file or wrong length of
xtras. The same learning objects are running under IE without
problems.
Last year I worked with AW65 and had only a few problems with
my studends.
I used the default settings for publishing (I changed only
the window style to"onTop").
Here is an example "
http://www.rw-interaktiv.de/aufgliederung_eigenkapitals/aufgliederung_eigenkapitals.htm"
(its in German).
Can anybody help? The students should use the learning
objects for the examination.
Thank you very much and greetings from Austria.
UweSome versions of Firefox will not display the security dialog
- I don't know
why. If your students can make sure that your site is a
trusted site (or the
whole domain as you have) then it should work without any
problems.
Unfortunately without something being trusted in the first
place your
program can't make that setting. They'd have to locate the
file and edit it
by hand. You could have them load the application one time in
IE. Have them
set the domain to trusted when the security dialog appears.
From then on
they could use Firefox becuase the trust setting will be
there. This should
at least rule out the security dialog being the issue.
HTH,
Mike
====================
Mike Baker
Adobe Community Expert
[email protected]
"Paul Swanson" <[email protected]> wrote in
message
news:f6e34m$882$[email protected]..
> Actually, I don't remember seeing the security dialog
when I first
launched
> it yesterday. I didn't get it today, and my AWSHKWV.INI
file (dated today)
> has only:
>
> # Security settings:
> VERSION 2
> Security = TrustOnlyListed
> WarnNonTrusted = ON
> WarnTrusted = OFF
> TrustedSite =
http://*.harlandds.*
>
> So I believe Uwe may have disabled the security dialog.
Still, I didn't
get
> any errors, even after renaming my XTRAS folder. I have
the 2004 Web
Player,
> so maybe that has something to do with it.
>
> - Paul
>
>
> "Mark Tomlinson" <[email protected]> wrote in
message
> news:f6dvhg$3ri$[email protected]..
> > gutu1 wrote:
> > > Thank you for your quick answer. My students
told me, they installed
the
> plugin
> > > manually. Some got only a red bar with "error
loading", some got
errors
> like
> > > "file missing or wrong length" for files of
the xtras. But all xtras
are
> on the
> > > server.
> > > I told my students to use IE, but many
students do not want to use
> IE...
> > >
> > > best regrads
> > > Uwe
> > >
> >
> > So do they see the security dialog generated by
Authorware when using
> > FireFox ???
>
> -
I turned my MacBook Pro and got an error message with lines and lines of code and then it turns off
I turned on my MacBook Pro and got an error message with several lines of code and then it turns off
Were you able to see any of the error codes? Have you tried resetting NVRAM (booting while hold cmd+option+p+r until the second chime)?
-
Need Help with VPN and 10.5 Server
I am at my wits end trying to get my VPN set-up on my X-serve running 10.5 server. Here is what I have for a set-up.
I have set-up my X-Serve as a Standard Server install.
I have put "pinholes" in my router using the following port info:
1701 UDP L2TP - Mac OS X Server VPN service
1723 TCP PPTP - Mac OS X Server VPN service
When I try to log-in remotely, it says it is connecting and then comes back with "The Connection has failed. Please verify your settings and try again." I know my my log-in and password is correct.
Any help or direction at all would be VERY much appreciated. I am completely out of ideas after trying for a week. Thanks!hi,
i've opened ports 47/all (called GRE), 50/all (called ESP), 1701/L2TP, 500/VPN and 4500/IKE-NAT when using L2TP for VPN. i'm not sure if 47 and 50 are related to VPN or IChat, but i guess it's VPN
the other ports you mentioned might be related to PPTP for VPN which you actually don't need. try restrict them to the ports i listed when using L2TP, try and if it doesn't work, open 47 and 50. it is important that these two ports support both TCP and UDP because actually they are not TCP nor UDP because they use something similair like ICMP (used for ping).
br,
günther -
Problems with VPN and Windows Network Shares
I'm in the middle of a Windows domain migration and I've setup the two way trust for the domains.
Cisco VPN clients authenticate against the old domain.
A user with an account in the new domain and whos laptop is joined to the new domain (also has a user account in the old domain) can connect to the VPN but is asked for Windows authentication when they connect to a network share in either domain.
Users whos account/laptop are in the old domain don't have this issue.
Any ideas or suggestions?This may happens because broadcasts do not go through an IPSec tunnel.
Browsing Network Neighborhood is a function of the Microsoft browsing service. Any problems are usually because the PC or master browsers do not function properly. Network Neighborhood is officially not supported. However, it works if configured correctly. Browsing Network Neighborhood works by obtaining the browse list from either a master or backup browser. This list is obtained locally on your LAN by using NetBIOS Broadcasts to locate domain browsers.
Inorder to resove this :
Make sure you have NetBIOS over TCP enabled on the adapter that you use to connect to the domain.
Refer this related links:
http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_tech_note09186a0080194b4a.shtml -
Error 500 with .htaccess and +FollowSymlinks
Hi, I'm doing a website for a community of gamers and I have one .htaccess on the root folder of the website that cointains parameters to allow using friendly urls. The content of the .htacces is this:
RewriteEngine On
Options +FollowSymLinks
RewriteBase /~doodom/doomhispano/
Rewriterule ^administracion/$ ?administracion
Rewriterule ^articulos.html$ ?articulos
Rewriterule ^descargas.html$ ?descargas
Rewriterule ^foro/$ ?foro
Rewriterule ^foro/(.*)/(.*)/(.*)/(.*).html$ ?foro&cat=$1&sub=$2&thr=$3&title=$4
Rewriterule ^foro/(.*)/(.*)/$ ?foro&cat=$1&sub=$2
Rewriterule ^foro/(.*)/$ ?foro&cat=$1
Rewriterule ^juegos.html$ ?juegos
Rewriterule ^logout.html$ logout.php
Rewriterule ^noticias/$ ./ [R]
Rewriterule ^noticias/(.*)/(.*).html$ ?noticias&id=$1&title=$2
Rewriterule ^noticias/archivo(.*).html$ ?offset=$1
Rewriterule ^perfil/$ ./ [R]
Rewriterule ^perfil/(.*).html$ ?perfil=$1
Rewriterule ^preferencias.html$ ?preferencias
Rewriterule ^registro.html$ ?registro
The problem is that Apache delivers an Error 500 and I don't know why. It always happen when I have uncommented this line:
Options +FollowSymLinks
If I comment it the website loads correctly, but the friendly urls don't work at all.
I also paste the content of my /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 81
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride none
Order allow,deny
Allow from all
</Directory>
<Directory "/home/*/public_html">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# PHP 5
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
And if I check the error_log I can see the following:
[Tue Jun 02 23:32:39 2009] [alert] [client xx.xx.xx.xx] /home/doodom/public_html/doomhispano/.htaccess: Options not allowed here
Why does this happen? Any ideas?
I've searched all along the Internet, I have tried it out everything but still nothing.
Thanks in advance for your help.
Last edited by [DoodoM] (2009-06-02 19:48:42)Uhm... what's an /etc/httpd/conf/httpd.conf?
If I had that error, I'd look into /etc/apache/sites* and see if for the site changing follow-symlinks and everything is allowed.
Then again, that's not an arch server, so you might be better of ignoring me (if your... stuff... is all that different. Me did my server strange chaos admin method like )
Edit: wah, now I've been confusing myself, that huge config file is a mess in my eyes - are you sure you're supposed to change stuff in there? What folder is your htaccess in? Most I saw look about like that in there...:
<Directory "??????">
Options Indexes FollowSymLinks
AllowOverride none
Order allow,deny
Allow from all
</Directory>
Which isn't a thaaat good for using .htaccess.
Last edited by whoops (2009-06-02 20:01:58) -
Trouble with VPN and Verizon MI424WR router - not connecting to company intranet
I need to connect to my work intranet and via VPN. There was no problem accessing both when I had Verizon DSL. Since I switched to FIOS, I can access email via VPN but not my Company's internet and various internal company websites. I saw a previous forum with a similar problem using the Actiontec router, but wanted to make sure I tried a correct fix for my router. My router is connected via both Coax ad Ethernet to the ONT since I signed up for FIOS internet first and then added TV later. I don't know if both are active. I have a spare Linksys wireless G router I can add to the network if needed. My router firmware is 20.10.7.
Solved!
Go to Solution.Thanks to all for the suggestions. I could not see how the VPN software was the culprit since it worked at various hotels, Panera bread ... but decided to try to uninstall and re-install the latest version. Viola, I am now working. I plan to leave the linksys router in the system since the speed is significantly faster.
-
Hi,
I have been struggling to find a solution as to why my L2TP tunnel comes up, but, no ip through IPCP is working. I have a few third party VPN providers that I can connect to with no problem. My config is solid as far as the Virtual-PPP interface is concerned. So, as far as the AAA is concerned, here are a few commands that I have used:
aaa new-model
aaa authentication login local_auth local
aaa authentication ppp default none
So, here is the revelant debugs:
008940: *Jan 7 15:08:05.543 MDT: Vp1 LCP: Timeout: State Listen
008941: *Jan 7 15:08:05.543 MDT: AAA/AUTHOR (00000007): Method list id=0 not configured. Skip author
008942: *Jan 7 15:08:05.543 MDT: Vp1 PPP: Authorization NOT required
008943: *Jan 7 15:08:05.543 MDT: Vp1 PPP: No remote authentication for call-out
008944: *Jan 7 15:08:05.543 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
008945: *Jan 7 15:08:05.543 MDT: Vp1 LCP: O CONFREQ [Listen] id 142 len 10
008946: *Jan 7 15:08:05.543 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008947: *Jan 7 15:08:07.559 MDT: Vp1 LCP: Timeout: State REQsent
008948: *Jan 7 15:08:07.559 MDT: Vp1 LCP: O CONFREQ [REQsent] id 143 len 10
008949: *Jan 7 15:08:07.559 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008950: *Jan 7 15:08:09.575 MDT: Vp1 LCP: Timeout: State REQsent
008951: *Jan 7 15:08:09.575 MDT: Vp1 LCP: O CONFREQ [REQsent] id 144 len 10
008952: *Jan 7 15:08:09.575 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008953: *Jan 7 15:08:11.591 MDT: Vp1 LCP: Timeout: State REQsent
008954: *Jan 7 15:08:11.591 MDT: Vp1 LCP: O CONFREQ [REQsent] id 145 len 10
008955: *Jan 7 15:08:11.591 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
Cisco3825#
008956: *Jan 7 15:08:13.607 MDT: Vp1 LCP: Timeout: State REQsent
008957: *Jan 7 15:08:13.607 MDT: Vp1 LCP: O CONFREQ [REQsent] id 146 len 10
008958: *Jan 7 15:08:13.607 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008959: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREQ [REQsent] id 0 len 8
008960: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008961: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFACK [REQsent] id 0 len 8
008962: *Jan 7 15:08:13.691 MDT: Vp1 LCP: AuthProto PAP (0x0304C023)
008963: *Jan 7 15:08:13.691 MDT: Vp1 LCP: State is Open
008964: *Jan 7 15:08:13.691 MDT: Vp1 PPP: Phase is AUTHENTICATING, by the peer
Cisco3825#
008965: *Jan 7 15:08:13.691 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
008966: *Jan 7 15:08:13.691 MDT: Vp1 LCP: I CONFREJ [Open] id 146 len 10
008967: *Jan 7 15:08:13.691 MDT: Vp1 LCP: MagicNumber 0x1A220FED (0x05061A220FED)
008968: *Jan 7 15:08:13.691 MDT: Vp1 LCP: O CONFREQ [ACKsent] id 147 len 4
008969: *Jan 7 15:08:13.775 MDT: Vp1 LCP: I CONFACK [ACKsent] id 147 len 4
008970: *Jan 7 15:08:13.775 MDT: Vp1 LCP: State is Open
008971: *Jan 7 15:08:13.775 MDT: AAA/AUTHEN/PPP (00000007): Pick method list 'default'
Cisco3825#
008972: *Jan 7 15:08:23.783 MDT: Vp1 AUTH: Timeout 1
Cisco3825#
008973: *Jan 7 15:08:33.799 MDT: Vp1 AUTH: Timeout 2
Cisco3825#
008974: *Jan 7 15:08:43.815 MDT: Vp1 AUTH: Timeout 3
Cisco3825#
008975: *Jan 7 15:08:53.831 MDT: Vp1 AUTH: Timeout 4
Cisco3825#
008976: *Jan 7 15:09:03.847 MDT: Vp1 AUTH: Timeout 5
Cisco3825#
008977: *Jan 7 15:09:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008978: *Jan 7 15:09:13.864 MDT: Vp1 AUTH: Timeout 6
Cisco3825#
008979: *Jan 7 15:09:17.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008980: *Jan 7 15:09:23.880 MDT: Vp1 AUTH: Timeout 7
Cisco3825#
008981: *Jan 7 15:09:27.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008982: *Jan 7 15:09:33.896 MDT: Vp1 AUTH: Timeout 8
Cisco3825#
008983: *Jan 7 15:09:37.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008984: *Jan 7 15:09:43.912 MDT: Vp1 AUTH: Timeout 9
Cisco3825#
008985: *Jan 7 15:09:47.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008986: *Jan 7 15:09:53.928 MDT: Vp1 AUTH: Timeout 10
Cisco3825#
008987: *Jan 7 15:09:57.356 MDT: Vp1 PPP: Outbound ip packet dropped
Cisco3825#
008988: *Jan 7 15:10:03.944 MDT: Vp1 AUTH: Timeout 11
008989: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Sending Acct Event[Down] id[7]
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
008991: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): Method list not found
008992: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007): del node, session 4
008993: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007): free_rec, count 0
008994: *Jan 7 15:10:03.944 MDT: AAA/ACCT/NET(00000007) reccnt 0, csr FALSE, osr 0
008995: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008996: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) base 2114/15028 pre 15468/32490 call 15468/32490
008997: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [pre-sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
008998: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Update Vp1
008999: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) base 2114/15028
Cisco3825# pre 15468/32490 call 15468/32490
009000: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Vp1 [sess] (rx/tx) adjusted, pre 13354/17462 call 0/0
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
009002: *Jan 7 15:10:03.944 MDT: Vp1 PPP: Phase is TERMINATING
009003: *Jan 7 15:10:03.944 MDT: Vp1 LCP: O TERMREQ [Open] id 148 len 4
009004: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): CALL STOP
009005: *Jan 7 15:10:03.944 MDT: AAA/ACCT(00000007) reccnt 0, osr 0
009006: *Jan 7 15:10:04.028 MDT: Vp1 LCP: I TERMACK [TERMsent] id 148 len 4
009007: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Closed
009008: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is DOWN
009009: *Jan 7 15:10:04.028 MDT: Vp1 PPP: Phase is ESTABLISHING, Passive Open
009010: *Jan 7 15:10:04.028 MDT: Vp1 LCP: State is Listen
Cisco3825#
009011: *Jan 7 15:10:06.024 MDT: Vp1 LCP: Timeout: State Listen
009012: *Jan 7 15:10:06.024 MDT: AAA/BIND(00000009): Bind i/f Virtual-PPP1
009013: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Register Vp1 100Mbit/s, poll every 5m 0s
009014: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Update Vp1
009015: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) base 15474/32498 pre 15474/32498 call 15474/32498
009016: *Jan 7 15:10:06.024 MDT: AAA/ACCT/HC(00000009): Vp1 [init-sess] (rx/tx) adjusted, pre 0/0 call 0/0
009017: *Jan 7 15:10:06.024 MDT: AAA/ACCT/EVENT/(00000009): CALL START
009018: *Jan 7 15:10:06.024 MDT: Getting session id for NET(00000009) : db=6902396C
009019: *Jan 7 15:10:06.024 MDT: AAA/ACCT(00000000): add node, session 6
009020: *Jan 7 15:10:06.024 MDT: AAA/ACCT/NET(00000009): add, count 1
009021: *Jan 7 15:10:06.024 MDT: Getting session id for NONE(00000009) : db=6902396C
009022: *Jan 7 15:10:06.024 MDT: AAA/AUTHOR (0000
Cisco3825#0009): Method list id=0 not configured. Skip author
009023: *Jan 7 15:10:06.024 MDT: Vp1 PPP: Authorization NOT required
009024: *Jan 7 15:10:06.024 MDT: Vp1 PPP: No remote authentication for call-out
009025: *Jan 7 15:10:06.024 MDT: Vp1 AAA/AUTHOR/LCP: Authorization succeeds trivially
009026: *Jan 7 15:10:06.024 MDT: Vp1 LCP: O CONFREQ [Listen] id 149 len 10
009027: *Jan 7 15:10:06.024 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009028: *Jan 7 15:10:06.108 MDT: Vp1 LCP: I CONFREJ [REQsent] id 149 len 10
009029: *Jan 7 15:10:06.108 MDT: Vp1 LCP: MagicNumber 0x1A23E698 (0x05061A23E698)
009030: *Jan 7 15:10:06.108 MDT: Vp1 LCP: O CONFREQ [REQsent] id 150 len 4
009031: *Jan 7 15:10:06.192 MDT: Vp1 LCP: I CONFACK [REQsent] id 150 len 4
Cisco3825#
009032: *Jan 7 15:10:07.356 MDT: Vp1 PPP: Outbound ip packet dropped
009033: *Jan 7 15:10:08.104 MDT: Vp1 LCP: Timeout: State ACKrcvd
009034: *Jan 7 15:10:08.104 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 151 len 4
009035: *Jan 7 15:10:08.188 MDT: Vp1 LCP: I CONFACK [REQsent] id 151 len 4
Cisco3825#
009036: *Jan 7 15:10:10.120 MDT: Vp1 LCP: Timeout: State ACKrcvd
009037: *Jan 7 15:10:10.120 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 152 len 4
009038: *Jan 7 15:10:10.204 MDT: Vp1 LCP: I CONFACK [REQsent] id 152 len 4
Cisco3825#show
009039: *Jan 7 15:10:12.136 MDT: Vp1 LCP: Timeout: State ACKrcvd
009040: *Jan 7 15:10:12.136 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 153 len 4
009041: *Jan 7 15:10:12.216 MDT: Vp1 LCP: I CONFACK [REQsent] id 153 len 4
Cisco3825#show l2tp
009042: *Jan 7 15:10:14.152 MDT: Vp1 LCP: Timeout: State ACKrcvd
009043: *Jan 7 15:10:14.152 MDT: Vp1 LCP: O CONFREQ [ACKrcvd] id 154 len 4
009044: *Jan 7 15:10:14.232 MDT: Vp1 LCP: I CONFACK [REQsent] id 154 len 4
Cisco3825#show l2tp
L2TP Tunnel and Session Information Total tunnels 1 sessions 1
LocTunID RemTunID Remote Name State Remote Address Sessn L2TP Class/
Count VPDN Group
37822 1 xxxxxxxxxxxx est xxx.xxx.xxx.xxx 1 l2tp_default_cl
LocID RemID TunID Username, Intf/ State Last Chg Uniq ID
Vcid, Circuit
124 1 37822 1, Vp1 est 00:02:03 1
Here are a couple things I noticed:
009001: *Jan 7 15:10:03.944 MDT: AAA/ACCT/HC(00000007): Deregister Vp1
008990: *Jan 7 15:10:03.944 MDT: AAA/ACCT/EVENT/(00000007): NET DOWN
I don't have this issue with other providers. I don't have the whole radius / tacacs things setup as it's not necessary for our needs.
Ideas?
Thanks for the help.
JasonHi,
To resolve your issue as soon as possible, please post your question on the Forefront TMG forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=Forefrontedgegeneral
Steven Lee
TechNet Community Support -
Error 20312 with Amplitude and Levels vi
Hello,
I have been having a frequent error with a VI in a program I am using. The specific error is:
Error-20312 occurred at "ma_ptmFetch.vi" when called from "Amplitude and Levels N chan.vi"(waveform index 0 of 4)
Possible reasons: The input waveform is zero.
I am using the amplitude and Levels vi to measure the amplitude of 4 current waveforms that are being read into the DAQ card. The error message occurs usually right when the program begins to run, but does not always occur. The DAQ card that is being used for this measurement is a PCI-6071E, and it initially measures many curents and voltages, and then splits them up before sending them to the amplitude and levels vi. When the error does not come up the vi works properly and measures the correct current, so I am not sure what the problem is. If anyone could give me any insight as to what may be the cause of this error, or how to troubleshoot it it would be greatly appreciated.
Thanks,
SteveHello Mike,
I believe you are right, and that this error occurs because the vi is receiving an empty set. When using the generate signal vi, I receive no errors at all, its only when trying to take input from the DAQmx read. I am reading continuous samples from multiple channels in a waveform, and then splitting it up into different sets. I made a small program to bar out any other factors from the large program it is in, and the problem still persists. Also, I tried changing to read only 1 channel. The problem still occurs at this setting, but less frequently than when using multiple channels.
I believe I have found a workaround for this problem, but I'm not sure if there is a better way to go about doing this. I made a sequence with the Start Task vi in the first frame, and the while loop and clear task in the 2nd frame. The while loop contains the DAQmx read vi and the amplitude and levels vi. If I place a Wait vi in the first frame for a short amount of time, say 50ms, the problem disappears. Is it possible the Amplitude and Levels vi is trying to read values before the DAQ is finished starting the task and reading?
I can attach a copy of the small test program I made if you want to see for yourself as well.
Thanks,
Steve -
Ipad2 restore fails with unknown error(1) with "iTunes and recovery" mode logo
Ipad2 64GB was sluggish and we tried to update with latest iOS update, security 2014-005 and latest iTunes on iMac 12.01 It enters a recoverymode with the iTunes logo and connector symbol displayed on the screen. Recognized that iPad is connected and proceeded to restore to factory condition. Goes through several stages, FW verification, restore etc but fails to proceed past a certain point and puts up an unknown error (1) occurred message. Disabled firewall and tried restore and it failed in the same spot. Tried using power + home button combos to enter DFW or restore mode. None of them worked. Took it to the Apple store and was told that it can't be debugged further because it did not yet boot up ( if it has the iTunes and connector symbol it must be in some state that it can be interacted with?) It's physically in a perfectly beautiful condition, nothing funky (jail breaking etc ) done to it, well taken care of. The tech said that he can offer a replacement for 299$ after he tried to restore it twice without success. I am surprised that this tech thinks that it cannot be probed with some low level FW tools through the serial connector to determine the system state. Any suggestions?
Hey Ngtrishank,
Thanks for the question. Based on the information you have provided, I concur with the Apple Store’s conclusion. Error 1 is usually related to a hardware issue with the device. While there are a few steps you can attempt in the following resource, in most cases Error 1 signifies that the device needs to be serviced. For more information on troubleshooting Error 1, see this article:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-us/ts3694
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
If you’d like to learn more about your Service options for this device, check out the following link:
iPad Other Repair Options - Apple Support
http://www.apple.com/support/ipad/repair/other/
Thanks,
Matt M. -
Communication Error Problem with Video and Screen Sharing
Hello,
I m having problem with Ichat. when i try to do Video chat or Screen Sharing below error comes up.
I m using cable internet with Belkin N1
System Version: Mac OS X 10.5.3 (9D34)
Date/Time: 2008-06-03 20:27:41.400 -0400
OS Version: 10.5.3 (Build 9D34)
Report Version: 4
iChat Connection Log:
2008-06-03 20:27:21 -0400: AVChat started with ID 2769883123.
2008-06-03 20:27:21 -0400: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2008-06-03 20:27:21 -0400: 0x13013b00: State change from AVChatNoState to AVChatStateInvited.
2008-06-03 20:27:28 -0400: 0x13013b00: State change from AVChatStateInvited to AVChatStateConnecting.
2008-06-03 20:27:28 -0400: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-06-03 20:27:35 -0400: 0x13013b00: State change from AVChatStateConnecting to AVChatStateEnded.
2008-06-03 20:27:35 -0400: 0x13013b00: Error -7 (0x13013b00 cancelled the connection.)
2008-06-03 20:27:35 -0400: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2008-06-03 20:27:35 -0400: [email protected]: Error -7 (0x13013b00 cancelled the connection.)
Video Conference Error Report:
14.645193 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
293.961949 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
758.045541 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
1075.693927 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
1258.533344 @VCU/streamer/RTPTransport.c:2136 type=4 (00000000/2)
[Bandwidth Detection]
[Not enough packet samples 2 < 4]
1781.344021 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1783.345052 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1785.346520 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1787.347888 @SIP/SIP.c:2719 type=4 (900A0015/0)
[SIPConnectIPPort failed]
3383.885149 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
7813.022666 @SIP/SIP.c:2719 type=4 (900A002D/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
0.406893 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
8.118443 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
8.129986 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
14.144045 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK09f5b9bd1e4d33c5
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2136205293
Call-ID: defa27b6-31ba-11dd-be3b-cfbe37224012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3599205191
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:588777558
14.644801 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK09f5b9bd1e4d33c5
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2136205293
Call-ID: defa27b6-31ba-11dd-be3b-cfbe37224012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3599205191
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:588777558
279.446871 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 3 returns 1
287.436964 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
287.438520 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
293.461146 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK4303101f2554ea98
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1867071229
Call-ID: 85769318-31bb-11dd-be3b-b74460644012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 732
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1935268065
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1866488381
293.961779 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK4303101f2554ea98
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1867071229
Call-ID: 85769318-31bb-11dd-be3b-b74460644012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 732
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:1935268065
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1866488381
744.239740 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 5 returns 1
750.517513 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
750.518448 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
756.543419 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK1f50d8990838c81f
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1052795734
Call-ID: 997b984e-31bc-11dd-be3b-fa61f5654012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3034761863
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:776610911
757.044680 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK1f50d8990838c81f
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1052795734
Call-ID: 997b984e-31bc-11dd-be3b-fa61f5654012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3034761863
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:776610911
758.045358 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK1f50d8990838c81f
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1052795734
Call-ID: 997b984e-31bc-11dd-be3b-fa61f5654012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:3034761863
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:776610911
1063.004730 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 7 returns 1
1069.667213 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
1069.672588 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
1075.693823 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK35741b4a72d69d9b
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1496837366
Call-ID: 57b63b5c-31bd-11dd-be3b-d86790a34012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 731
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:176102850
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:2854759884
1256.325598 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 9 returns 1
1256.757393 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
1256.767649 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
1257.141977 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK55614a7a7f7ba71a
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:2673770886
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3331224135
1257.253561 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK55614a7a7f7ba71a
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 1 INVITE
User-Agent: Viceroy 1.3
Content-Length: 0
1257.255195 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK55614a7a7f7ba71a
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 1 INVITE
Contact: <sip:user@rip:16402>
User-Agent: Viceroy 1.3
Content-Length: 0
1257.332394 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK55614a7a7f7ba71a
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 1 INVITE
Contact: <sip:user@rip:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 450
[v=0
o=vcm39 0 0 IN IP4 rip
s=0
c=IN IP4 rip
b=AS:2147483647
t=0 0
a=hwi:1056:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 110
a=rtcp:16402
a=rtpmap:110 X-AAC_LD/22050
a=rtpID:2520341219
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480
a=framerate:20
a=rtpID:733545311
1257.332604 @SIP/Transport.c:2362 type=1 (00000000/0)
[ACK sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK7add85c00f6f0dc6
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 1 ACK
User-Agent: Viceroy 1.3
Content-Length: 0
1257.642507 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Received the first BWD packet from rip:16402]
1257.955687 @:0 type=1 (00000000/0)
[Bandwidth Detection]
[Avg=100931.40, NSDev=1.57%]
1258.233100 @:0 type=1 (00000000/1)
[Bandwidth Detection]
[Avg=869679.70, NSDev=7.49%]
1258.702183 @:0 type=1 (00000000/2)
[Bandwidth Detection]
[Avg=3474488.00, NSDev=24.40%]
1260.016557 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK2738fc6523248950
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
1260.516832 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK2738fc6523248950
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
1261.517422 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK2738fc6523248950
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
1263.518019 @SIP/Transport.c:2362 type=1 (00000000/0)
[MESSAGE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK2738fc6523248950
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Type: text/plain
Content-Length: 4
PING]
1265.976714 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK2738fc6523248950
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 2 MESSAGE
User-Agent: Viceroy 1.3
Content-Length: 0
1273.043638 @SIP/Transport.c:2362 type=1 (00000000/0)
[BYE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK763d7796031914e2
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 3 BYE
User-Agent: Viceroy 1.3
Content-Length: 0
1273.161015 @SIP/Transport.c:347 type=2 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK763d7796031914e2
To: "u0" <sip:user@rip:16402>;tag=1200030272
From: "0" <sip:user@lip:16402>;tag=819743753
Call-ID: c3dd156c-31bd-11dd-be3b-b7e742a34012@lip
CSeq: 3 BYE
User-Agent: Viceroy 1.3
Content-Length: 0
1762.610744 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 10 returns 1
1773.317540 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
1773.322527 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
1779.344480 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK34b49e2648d2d564
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=998627238
Call-ID: fb1f05fc-31be-11dd-be3b-9c4d663e4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1779.845119 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK34b49e2648d2d564
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=998627238
Call-ID: fb1f05fc-31be-11dd-be3b-9c4d663e4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1780.845748 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK34b49e2648d2d564
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=998627238
Call-ID: fb1f05fc-31be-11dd-be3b-9c4d663e4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1781.345070 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK596ba9626578f6ec
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2084002515
Call-ID: fc5048fa-31be-11dd-be3b-dbd281564012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1781.845847 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK596ba9626578f6ec
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2084002515
Call-ID: fc5048fa-31be-11dd-be3b-dbd281564012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1782.846655 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK596ba9626578f6ec
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=2084002515
Call-ID: fc5048fa-31be-11dd-be3b-dbd281564012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1783.346080 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK3a9b8a5a714039b3
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1521111363
Call-ID: fd819da0-31be-11dd-be3b-b08645704012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1783.846512 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK3a9b8a5a714039b3
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1521111363
Call-ID: fd819da0-31be-11dd-be3b-b08645704012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1784.847195 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK3a9b8a5a714039b3
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1521111363
Call-ID: fd819da0-31be-11dd-be3b-b08645704012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1785.347681 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK62f83f15717dabaf
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=712431637
Call-ID: feb3027c-31be-11dd-be3b-cdd2c9134012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1785.848691 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK62f83f15717dabaf
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=712431637
Call-ID: feb3027c-31be-11dd-be3b-cdd2c9134012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
1786.849557 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP sip:16402;branch=z9hG4bK62f83f15717dabaf
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=712431637
Call-ID: feb3027c-31be-11dd-be3b-cdd2c9134012@lip
CSeq: 1 INVITE
Contact: <sip:user@sip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 745
v=0
o=krupashah 0 0 IN IP4 sip
s=0
c=IN IP4 sip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:631112291
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:3345491811
3372.289429 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 12 returns 1
3377.356972 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
3377.358239 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
3383.384364 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK7e94a6fc320b57c6
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1695874314
Call-ID: b734ad34-31c2-11dd-be3b-8d98638c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:114338483
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1055223185
3383.884975 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK7e94a6fc320b57c6
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1695874314
Call-ID: b734ad34-31c2-11dd-be3b-8d98638c4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 739
v=0
o=krupashah 0 0 IN IP4 lip
s=0
c=IN IP4 lip
b=AS:2147483647
t=0 0
a=hwi:17412:2:2200
a=iChatEncryption:NO
a=bandwidthDetection:YES
m=audio 16402 RTP/AVP 110 121 12 3 0
a=rtcp:16402
a=rtpmap:121 speex/16000
a=rtpmap:122 speex/8000
a=rtpmap:113 X-AAC_LD/44100
a=rtpmap:110 X-AAC_LD/22050
a=rtpmap:3 GSM/8000
a=rtpmap:0 PCMU/8000
a=rtpID:114338483
m=video 16402 RTP/AVP 123 126 34
a=rtcp:16402
a=rtpmap:123 H264/90000
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 1 rules 30:352:288
a=framerate:30
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:640:480:640:480:20
a=fmtp:123 imagesize 0 rules 20:640:480:640:480:20
a=rtpID:1055223185
7799.404922 @Video Conference/VCInitiateConference.m:1582 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
7806.495589 @Video Conference/VCInitiateConference.m:1597 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
7806.496586 @Video Conference/VCInitiateConference.m:1701 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
7812.521746 @SIP/Transport.c:2362 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK2c7142083ac79fbb
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=1378214089
Call-ID: 072f0460-31cd-11dd-be3b-b93f6ff44012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 740Hi,
This page should show you the default info for accessing the Belkin
http://portforward.com/english/routers/port_forwarding/Belkin/F5D8231-4/iChat.ht m
It should not need the Port Forwarding (I Believe UPnP is in System Settings at the bottom of the menu on the left)
Also check the settings in the various menus for Blocking responses to Internet Pings.
If it has it you want to disable this.
Error 7 is also caused by DOS or SPI filters.
If this device has these it should be turned off.
I tested with someone only yesterday that had one of these and it worked out of the box (well he only turned UPnP on)
8:50 PM Thursday; June 5, 2008 -
A Little Nightmare: VerifyError: Error #1014 with Modules and Spark
Wow. This one is painful. Any help sorely appreciated. It's basically put dev on complete hold.
Using FlashBuilder 4.5.1 with an AIR app having migrated from FlexBuilder 3.0. I just went back to the FB3.0 and i'm currently getting the same errors (which i never used to get when i dealt with modules).
Trying to load modules via the ModuleManager. Had no problem when i used to use FlexBuilder 3.0 (about a year ago) for working in Flash. But now i get the following errors:
VerifyError: Error #1014: Class mx.modules::ModuleBase could not be found. (WHEN TRYING to load a ModuleBase subclass).
VerifyError: Error #1014: Class mx.modules::SkinnableContainer could not be found. (WHEN TRYING to load a spark Module subclass).
I get progress ModuleEvents, but never get to the READY/SETUP state (or those events), because i keep getting these errors.
I have scoured the internet. There is some advice, seems to revolve around SDK/compiler incompatibility, or perhaps setting the AIR xmlns setting in the app's xml file. But all that seems ok....
Some Data:
AIR version xmlns (in air app xml file): 2.6
LIBRARY PATH:
Component Set: MX + Spark
Framework Linkage: Use SDK Default (Merged Into Code)
Build Path libraries: Flex 4.5.1 - E:\Program Files\Adobe\Adobe Flash Builder 4.5\sdks\4.5.1
SDK 4.5.1
COMPILER:
Flex SDK Version: Use Default SDK (currently "4.5.1")
I can only guess that the FlashPlayer that is being accessed (or the AIR Player) is somehow an earlier version that doesn't support modules? How Do i find out what exact FlashPlayer/AIRPlayer is being used?
This is a rather nasty situation. I can't use all the old code i have in modules unless i can access the modules!
Any help VERY appreciated.
Thanks.Oh, one more note, i believe i have the FlashPlayer version 11 installed. Could that be part of the problem?
-
Error message with Vista and 7.2: Windows-No Disk Exception Processing Mess
I just got a new Dell computer with Windows Vista and I am trying to put iTunes on it. I can install it fine from the original CD, and then I am prompted to update it to 7.2. After updating, this is the message that I get: Windows-No Disk, Exception Processing Message 0xc0000013 Parameters 0x7620023C 0c847CDB4C 0x7620023C (Cancel Try Again Continue). If I click on any button countless times, iTunes does open up but then I get the blue screen dump message. I have installed and uninstalled it many different times and have tried any of the additional updates/patches with no effect. I did not see this message anywhere else in the forum, anyone able to help?
Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt -
Dynamic Routing with VPN and multiple Peers
I have several sites that connect to my primary host site (ASA5525-X) via LAN to LAN tunnels and currently all internal host routing is static. I need to implement a backup host site (ASA5520) for the remote sites to connect to. I know that I can add additional peers on each remote site for the host sites. However, I need to be able to do dynamic routing, so that if does not matter which site they are connected to the internal networks will learn where to route the traffic. I am running OSPF on my internal networks at both Primary and Backup host sites and they have an internal connection between the two sites.
Is there a way to accomplish this on the ASAs?
Thanks,
DougTo make perhaps my question a little more clear, this is an example of how I would the result to look like
http://www.latitudes.co.uk/dept_search_pages/search_provence.php
where the labels with the checkboxes are retrieved from the 'category' table and when one or more boxes are ticked, the corresponding values are used to make the selection in the WHERE statement in the MySQL query.
Hope someone can help me out.
Erik -
JVM Java heap space Error || even with -Xms- and -Xmx commands
hi all, i got a problem by allocating a very great boolean array.
first of all, here is my testcode:
public static void main(String[] args) {
boolean[] testfield = new boolean[70000000];
while(true){
//NOP
}as you see, i try to allocate an array with 70.000.000 boolean values - as 1 boolean may be represented as at least one physical bit we calculate the total amount of needed RAM-Space:
70.000.000 bit / 8 = 8750000 byte
8.750.000 byte = 8.75 MByte
My System ist WinVista Ultimate 64-bit running on a Quadcore T2200 with 2GB-DDR3 RAM
Looking in my Vista Ressourcemanager shows, that eclipse.exe reserves about 1.023 Mbyte....
As IDE I use eclipse
my eclipse.ini looks as follows:
-showsplash
org.eclipse.platform
--launcher.XXMaxPermSize
256M
-vmargs
-Dosgi.requiredJavaVersion=1.5
-Xms512m
-Xmx1024m
-XX:PermSize=512mby using following VMCommand "-XX:+PrintGCDetails" and running the above code the output displays:
[GC [DefNew: 180K->63K(960K), 0.0008311 secs][Tenured: 43K->107K(4096K), 0.0060371 secs] 180K->107K(5056K), 0.0069249 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
[Full GC [Tenured: 107K->105K(60544K), 0.0044835 secs] 107K->105K(61504K), [Perm : 17K->16K(12288K)], 0.0045553 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
Exception in thread "main" java.lang.OutOfMemoryError: Java heap space
at termain.main(termain.java:15)
Heap
def new generation total 4544K, used 163K [0x246a0000, 0x24b80000, 0x24b80000)
eden space 4096K, 4% used [0x246a0000, 0x246c8fe0, 0x24aa0000)
from space 448K, 0% used [0x24aa0000, 0x24aa0000, 0x24b10000)
to space 448K, 0% used [0x24b10000, 0x24b10000, 0x24b80000)
tenured generation total 60544K, used 105K [0x24b80000, 0x286a0000, 0x286a0000)
the space 60544K, 0% used [0x24b80000, 0x24b9a420, 0x24b9a600, 0x286a0000)
compacting perm gen total 12288K, used 16K [0x286a0000, 0x292a0000, 0x2c6a0000)
the space 12288K, 0% used [0x286a0000, 0x286a41c0, 0x286a4200, 0x292a0000)
ro space 8192K, 62% used [0x2c6a0000, 0x2cba2ba0, 0x2cba2c00, 0x2cea0000)
rw space 12288K, 52% used [0x2cea0000, 0x2d4e88e0, 0x2d4e8a00, 0x2daa0000)so can anyone tell me please, how i manage to allocate bigger arrays? or where at least is the problem?
Originally i was thinking like that way: Integer.MAXVALUE = (2^32)-1
=> biggest index an array can have
=> biggest allocation possible with ints weights (((2^32)-^1)/8)/1000*1000 = (round) 537 MByte < 2GByte => everything fine .... but it seems like not :-(
When i try to allocate 60.0000.000 it works fine....but that is far not enough :-&
thank you very much for your helping answers!The Sun Java virtual machine stores booleans as bytes, not bits, so for an array of 70 million booleans you need 70 million bytes, plus 8 bytes for the object header, and 4 bytes for the array length.
I suspect that your eclipse.ini controls the JVM running the Eclipse IDE, not the JVM running your application. Note that in the -XX:+PrintGCDetails output at the end, it shows you running out of memory with 4MB of young generation and 60MB of old generation. That's the default configuration, as if you hadn't specified -Xms and -Xmx.
The array of 60 million booleans only requires 60 million bytes (plus overhead), which fits in the default old generation.
I think you need to put the -Xms and -Xmx in the same place you put the -XX:+PrintGCDetails, since that does seem to display information about the JVM running your application, not the JVM running Eclipse.
Maybe you are looking for
-
Sun Web Server Reverse Proxy and Weblogic HTTP to HTTPS redirection
Hi, I am currently testing reverse-proxy from SJSW 7.0 update 5 to Weblogic server but I have encountered an issue. I have configured a context root to be forwarded to weblogic: Web Server: www.server.com URI: /path Reverse Proxy URL: wlserver:9000 W
-
No accounting document for 541 mat document
HI, I am doing subcontracting for that, i am using 541 mvt type but for that document no accounting document is generated, my problem is that whether accounting document should be generate or not ,if it is to be generate then in my case it is no
-
IPhone 3G does not show up in iTunes
When I plug in via USB port on rear of machine (powered USB), and I've tried both ports. I am using the supplied USB cable. I plug it in within' the first couple of days of purchase and it showed up, and I've installed the 2.0.2 (5C1) iPhone software
-
Flex Line Chart Vertical marker
Hi, I have a flex line chart and what I want to do is have an a vertical marker that extends to the outside the chart area at the last point. Does anyone have any ideas? Very smilar to this... http://tomgutz.wordpress.com/2007/12/17/flex-custom-chart
-
Cannot Trash Dupe Video track in CS 5.x
As part of my experiments in searching for the removed Clone Feather mouse/key combo (issue posted separately) I pressed Command-Option and naturally duplicated the sole video track in my PS timeline. First I tried Command Z to Undo. No repsonse. Tri