ERROR 5133 - Resource Limit at slapd start

Following a disordely shutdown (reset) of the server, we get the following message in the error log of directory server.
Message:
"[15/Nov/2004:08:49:22 -0500] - ERROR<5133> - Resource Limit - conn=-1 op=-1 msgI
d=-1 - Memory allocation error cannot calloc 0 bytes; trying to allocate 0 or a negative number of bytes is not portable and gives different results on different platforms. Please check the code and change it to avoid the attempt to allocate 0 bytes."
- fsck (ok)
- the config server on the same server is ok
- Solaris 2.9 SunOne 5.2 directory
- no custom plugin
- we have reload the database (ok) from an ldif
Has anybody encounter this error? Any sugestions on how to restore the service.

Thank you, your were absolutely right !
Looking at the logs folder we saw that the access.rotationinfo was corrupted. By removing that file (not all) the service started OK
As my first visit to this forum this realy makes my day.

Similar Messages

Database error text.. "Resource limit exceeded. MSGID= Job=753531/IBPADM/WP05"

Hello All,
We are getting below runtime errors
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "Resource limit exceeded. MSGID= Job=753531/IBPADM/WP05""
   Internal call code.........: "[RSQL/OPEN/PRPS ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLCATL2" or "LCATL2U17"
    "CATS_SELECT_PRPS"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
    In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
    SAP-Release 700
    Application server... "SAPIBP0"
    Network address...... "3.14.226.140"
    Operating system..... "OS400"
    Release.............. "7.1"
       Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 5
    Shortdump setting.... "full"
    Database server... "SAPIBP0"
    Database type..... "DB400"
    Database name..... "IBP"
    Database user ID.. "R3IBPDATA"
    Terminal................. "KRSNBRB032"
    Char.set.... "C"
    SAP kernel....... 721
    created (date)... "May 15 2013 01:29:20"
    create on........ "AIX 1 6 00CFADC14C00 (IBM i with OS400)"
    Database version. "DB4_71"
Patch level. 118
Patch text.. " "
Database............. "V7R1"
SAP database version. 721
Operating system..... "OS400 1 7"
Memory consumption
Roll.... 0
EM...... 12569376
Heap.... 0
Page.... 2351104
MM Used. 5210400
MM Free. 3166288
Information on where terminated
    Termination occurred in the ABAP program "SAPLCATL2" - in "CATS_SELECT_PRPS".
    The main program was "CATSSHOW ".
    In the source code you have the termination point in line 67
    of the (Include) program "LCATL2U17".
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "CATS_SELECT_PRPS" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLCATL2 "; its source code begins in line
    1 of the (Include program "LCATL2U17 ".
The exception must either be prevented, caught within proedure
"CATS_SELECT_PRPS" "(FUNCTION)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
SM21: Log
Database error -904 at PRE access to table PRPS
> Resource limit exceeded. MSGID= Job=871896/VGPADM/WP05
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Please help
Regards,
Usha

Hi Usha
Could you check this SAP Notes
1930962 - IBM i: Size restriction of database tables
1966949 - IBM i: Runtime error DBIF_DSQL2_SQL_ERROR in RSDB4UPD
BR
SS

Error 1074388947 at CAN Open Object, Exceed resource limit

Dear All,
Basically, I'm listening to 5 frames from NI-CAN, and I can't listen to the sixth...
To be more precise, I'm listening to STAT1, STAT2, EXT1, EXT2 and I'm sending commands to CMD.
When I try to add a "hearing" on the BITE frame, I obtain the error:
"1074388947 occured at NI-CAN Open Object (ncOpen.vi)
NI-CAN: Exceeded resource limit for queues in shared memory between firmware/driver. The ncReadmult function is not allowed. Solutions: Decrease queue lengths in objects; Set read queue length to at least 2; Decrease number of CAN Objects."
I can't see any significative parameter to change...
I'm doing a ncConfigCANNET + ncOpen + ncSetAttr, then for each frames: ncConfigCANObj + ncOpen + ncSetAttr + ncCreateOccur.
That's when I'm adding the sixth frame's part, I get the error at the output of the ncOpen.
Does someone knows what's happening ?
Thanks for any help you could give me, even if it's just a thought... Thanks in advance ! I'm quite desperate actually...
Laurent

Hi,
This is a KB wich could help.
http://digital.ni.com/public.nsf/allkb/CC36BA1DD421EC23862569060054F6E2?OpenDocument
.NIDays2008 {font-family:Arial, Helvetica, sans-serif; font-size:12px; color: #065fa3; font-weight: bold; text-decoration: none; text-align: right;} .NIDays2008 a, a:hover {text-decoration: none;} .NIDays2008 a img {height: 0; width: 0; border-width: 0;} .NIDays2008 a:hover img {position: absolute; height: 90px; width: 728px; margin-left: -728px; margin-top:-12px;}
>> Avez-vous entendu parler de NI Days ?

PI 7.11 - SXI_CACHE Issue - SQL 0904 - Resource Limit Exceeded

Hi PI & IBM I Gurus,
We are having the SXI_CACHE issue in our PI 7.11 SPS04 system. When we try to do the delta cache refresh through SXI_CACHE, it is returning the error SQL 0904 - Resource limit exceeded. When we try to do the full cache refresh, it is getting the issue 'Application issue during request processing'.
We have cleaned up the SQL Packages with DLTR3PKG command, which did not resolve the issue. We recently performed a system copy to build the QA instance and I observed that the adapter engine cache for the development is presented in the QA instance and removed that cache from there.
I am not seeing the adapter engine connection data cache in our PI system. The adapter engine cache is working fine.
All the caches are working fine from the PI Administration page. The cache connectivity test is failing with the same error as I mentioned for the SXI_CACHE.
Please let me know if you have encountered any issue like this on IBM I 6.1 Platform.
Your help is highly appreciated.
Thanks
Kalyan

Hi Kalyan,
SQL0904 has different reason codes ...
Which one are you seeing ?
Is the SQL pack really at its boundary of 1GB ?
... otherwise, it is perhaps a totally different issue ... then DLTR3PKG cannot help at all ...
If you should see this big SQL Package, you should use PRTSQLINF in order to see if there is more or less over and over the same SQL in, just with different host variables or so ...
If the last point should be the case, I would open a message with BC-DB-DB4 so that they can check how to help here or to talk to the application people to behave a bit different ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

PI 7.11 - SXI_CACHE Issue - SQL0904 - Resource limit exceeded

Hi IBM I Gurus,
We are having the SXI_CACHE issue in our PI 7.11 SPS04 system. When we try to do the delta cache refresh through SXI_CACHE, it is returning the error SQL 0904 - Resource limit exceeded. When we try to do the full cache refresh, it is getting the issue 'Application issue during request processing'.
We have cleaned up the SQL Packages with DLTR3PKG command, which did not resolve the issue. We recently performed a system copy to build the QA instance and I observed that the adapter engine cache for the development is presented in the QA instance and removed that cache from there.
I am not seeing the adapter engine connection data cache in our PI system. The adapter engine cache is working fine.
All the caches are working fine from the PI Administration page. The cache connectivity test is failing with the same error as I mentioned for the SXI_CACHE.
Please let me know if you have encountered any issue like this on IBM I 6.1 Platform.
Your help is highly appreciated.
Thanks
Kalyan

Hi Kalyan,
SQL0904 has different reason codes ...
Which one are you seeing ?
Is the SQL pack really at its boundary of 1GB ?
... otherwise, it is perhaps a totally different issue ... then DLTR3PKG cannot help at all ...
If you should see this big SQL Package, you should use PRTSQLINF in order to see if there is more or less over and over the same SQL in, just with different host variables or so ...
If the last point should be the case, I would open a message with BC-DB-DB4 so that they can check how to help here or to talk to the application people to behave a bit different ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

Windows server 2012 failover cluster error: Cluster resource 'Virtual Machine Configuration ... of type 'Virtual machine configuration in clustered role ... failed.

I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:
Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
Any suggestion on resolving this problem?
Thanks
Ikad

Thanks. The article referred to above gives the solution to my issue. There is a group policy that is applied to the OU where the host servers were placed. Doing gpupdate /force temporarily removes the problem. Unfortunately the NT Virtual Machine\Virtual
Machines account is a special account that cannot be added like other accounts and granted the log on as a service right. The thread
http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/d56f2eae-726e-409a-8813-670a406593e8 contains how it can be added which is by creating a group and running the command
Net localgroup VMTest “NT Virtual Machine\Virtual Machines” /add
to add it to a local group VMTest. VMTest is then assigned the right to log on as a service.
Ikad

Error message appears when trying to start server in VM Manager

Error message appears when trying to start server in VM Manager
OVMAPI_4005E No worker server found to perform operation on: OracleVMsrv-1
When trying to restart server:
OVMRU_004007E Cannot perform the operation. Server: OracleVMsrv-1, is not running.

Hey SDGardella,
Thanks for the question. I understand that you are receiving error 499 when attempting to download purchases from the iTunes Store. The following resource outlines this error message:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 499"
This alert occurs due to security software. Follow iTunes for Windows: Troubleshooting security software issues.
Thanks,
Matt M.

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. pleas

When I load Illustrator creative suit (5.5) on my new computer, it loads Then I put in the serial number, which is correct, but when i go to click on the program to use it it says ERROR: localized resource file from this program could not be loaded. please re install of repair the application and try again. I have done this and it's still not working

anomaly jade,
You only need to use the serial number during installation.
Have you, at least seemingly, been able to install, and then you are unable to start up?
If that is the case, you could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Error in resource driver... XAException

Hi,
I have a nagging question hope someone here can help. I have a BPEL process running on a mid-tier server and I kept getting the XAException when I start the process. The process did run despites the message and I did not get the message when I run the same process in my local host. So this got to be a configuration issue on my mid-tier server. Here is the top-level message from the exception:
06/03/16 09:13:25 Error in resource driver
javax.transaction.xa.XAException: During rollback the commit on the physical connection failed. Exception: java.sql.SQLException: Closed Connection
06/03/16 09:13:25 Error in bean ejb/collaxa/system/CubeDeliveryBean
javax.transaction.SystemException: javax.transaction.xa.XAException: During rollback the commit on the physical connection failed.
Exception: java.sql.SQLException: Closed Connection
I have configured the oc4j-ra.xml for DbAdater and FtpAdapter. Is there more?

I have increased the default values but no visible effect. I am still getting the same errors. The strange thing is that all my processes run to completion. They have Database_Adapter (both inbond and outbond) and FTP_Adapter (outbond).
oc4j-ra.xml...
- <connector-factory location="eis/DB/XXXXX" connector-name="Database Adapter">
<config-property name="driverClassName" value="oracle.jdbc.driver.OracleDriver" />
<config-property name="connectionString" value="jdbc:oracle:thin:@mp2p1:1521:XXXX" />
<config-property name="userName" value="XXXXXXXXXX" />
<config-property name="password" value="XXXXXXXXX" />
<config-property name="minConnections" value="5" />
<config-property name="maxConnections" value="250" />
<config-property name="minReadConnections" value="1" />
<config-property name="maxReadConnections" value="100" />
<config-property name="usesExternalConnectionPooling" value="false" />
<config-property name="dataSourceName" value="" />
<config-property name="usesExternalTransactionController" value="false" />
<config-property name="platformClassName" value="oracle.toplink.internal.databaseaccess.Oracle9Platform" />
<config-property name="usesNativeSequencing" value="true" />
<config-property name="sequencePreallocationSize" value="50" />
<config-property name="tableQualifier" value="" />
<config-property name="defaultNChar" value="false" />
<config-property name="usesBatchWriting" value="true" />
</connector-factory>
data-sources.xml...
<data-source class="com.evermind.sql.DriverManagerDataSource"
     name="BPELServerDataSource"
     location="jdbc/BPELServerDataSourceWorkflow"
     xa-location="BPELServerDataSource"
     ejb-location="jdbc/BPELServerDataSource"
     connection-driver="oracle.jdbc.OracleDriver"
     max-connections="250"
     min-connections="10"
     connection-retry-interval="30"
     max-connect-attempts="30"
     url="jdbc:oracle:thin:[username/password]@XXX.XXX.XXX.XXX:orcl"/>

Rs-ora:resource group failed to start on chosen node; it may end up failing

I have configured two node failover cluster environment using netra a/d 1000 storage. When I try to deploy oracle server application it throws the following error
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
I created metaset and gave one raw did disk to that metaset.
I created logical hostname resource, ha-storage plus resource. Later I brought the resource group to online using following command
#clrg online emM rg-ora
Later I created oracle cluster resource using following command.
#clrs create -g rg-ora -t SUNW.oracle_server -p ORACLE_HOME=/global/oracle/product/10.2.0/db_1 -p ORACLE_SID=infra -p Alert_log_file=/global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log -p Connect_string=sysdba/dbadmin1@infra -p Resource_dependencies=rs-ora-has rs-ora
node1 - Validation failed. ORACLE_HOME /global/oracle/product/10.2.0/db_1 does not exist
node1 - ALERT_LOG_FILE /global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log doesn't exist
node1 - PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/initinfra.ora nor server PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/spfileinfra.ora exists
node1 - This resource depends on a HAStoragePlus resouce that is not online on this node. Ignoring validation errors.
rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
The status of oracle resource shows as follows.
Resource Name Node Name State Status Message
rs-ora node1 Start failed Faulted
I used solaris 10 update 6 patch level is Generic_137137-09, Oracle version 10.2.0, Sun clusters 3.2 update1. Following are the vfstab and /var/adm/messages of both nodes.
Node1#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node2#grep ora /etc/vfstab
/dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
Node1#more /var/adm/messages
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <ha-
host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<rg-ora.ha-host-1.10>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_prenet_start> for resour
ce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <1800> seconds
Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_prenet_start>:tag=<rg-ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<2>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been suspended.
Oct 17 05:19:20 node1 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for oradg
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<rg-
ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
has been resumed.
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successful
ly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <1800 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <ha-host-1>
, resource group <rg-ora>, node <node1>, timeout <500> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_start>:tag=<rg-ora.ha-host-1.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEA
K, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resourc
e <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <500 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <ha
-host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_start> for resource <rs-
ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<rg-ora.ha-host-1.7>: Calling security_clnt_connect(..., host=<node1>, sec_typ
e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_start>:tag=<rg-ora.rs-ora-has.0>: Calling security_clnt_connect(..., host=<node1>,
sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for
resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_start> completed successfully for
resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_start> for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
lib/rgm/rt/hastorageplus/hastorageplus_monitor_start>:tag=<rg-ora.rs-ora-has.7>: Calling security_clnt_connect(..., host=<tes
tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_start> completed successfu
lly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_validate> for resour
ce <rs-ora>, resource group <rg-ora>, node <node1>, timeout <120> seconds

Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor/
oracle_server/bin/oracle_server_validate>:tag=<rg-ora.rs-ora.2>: Calling security_clnt_connect(..., host=<node1>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_validate> completed successful
ly for resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <120 seconds>
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_init> for resource <
rs-ora>, resource group <rg-ora>, node <node1>, timeout <30> seconds
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_init>:tag=<rg-ora.rs-ora.4>: Calling security_clnt_connect(..., host=<node1>, sec_type {0
:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_init> completed successfully f
or resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <30 seconds>
Oct 17 05:19:38 node1 Cluster.CCR: [ID 973933 daemon.notice] resource rs-ora added.
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_start> for resource
<rs-ora>, resource group <rg-ora>, node <node1>, timeout <600> seconds
Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
/oracle_server/bin/oracle_server_start>:tag=<rg-ora.rs-ora.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {
0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 17 05:19:48 node1 SC[SUNWscor.oracle_server.start]:rg-ora:rs-ora: [ID 876834 daemon.error] Could not start server
Oct 17 05:19:48 node1 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/oracle_server_start> failed on resource <rs-o
ra> in resource group <rg-ora> [exit code <1>, time used: 1% of timeout <600 seconds>]
Node2# more /var/adm/messages
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group rg-ora state on node node2 change to RG_PENDIN
G_OFFLINE
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_MON_STOPP
ING
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_MON_STOPPI
NG
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ha-host
-1>, resource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <
rs-ora-has>, resource group <rg-ora>, node <node2>, timeout <90> seconds
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_monitor_stop>:tag=<rg-ora.ha-host-1.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK
, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<rg-ora.rs-ora-has.8>: Calling security_clnt_connect(..., host=<node2>, s
ec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully f
or resource <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <90 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_ONLINE_UN
MON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource rs-ora-has status on node node2 change to R_FM_UNKNO
WN
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource rs-ora-has status msg on node node2 change to <Stopp
ing>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <rs-ora-h
as>, resource group <rg-ora>, node <node2>, timeout <1800> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hastorageplus/hastorageplus_stop>:tag=<rg-ora.rs-ora-has.1>: Calling security_clnt_connect(..., host=<node2>, sec_type
{0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for reso
urce <ha-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_ONLINE_UNM
ON
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resou
rce <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <1800 seconds>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPED
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_STOPPING
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ha-host-1>, res
ource group <rg-ora>, node <node2>, timeout <300> seconds
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_UNKNOW
N
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Stoppi
ng>
Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
rgm/rt/hafoip/hafoip_stop>:tag=<rg-ora.ha-host-1.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRO
NG, 2:DES} =<1>, ...)
Oct 14 20:20:06 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.032.244:0, remote = 000.000.000.000:0, s
tart = -2, end = 6
Oct 14 20:20:06 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_OFFLIN
E
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Logica
lHostname offline.>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ha
-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_OFFLINE
Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_POSTNET_S
TOPPING

Javax.resource.ResourceException: Failed to start the connection

I have created the JMS bridge in Weblogic10.0 to connect with MQ server, I am getting error when startingup the weblogic server. Below the error
####<28-Mar-2009 10:56:25 o'clock GMT> <Info> <MessagingBridge> <clx25ao02> <aauat100-02> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1238237785804> <BEA-200042> <Bridge MQ_TO_JMS_1 failed to connect to the source destination and will try again in 20 seconds. This could be a temporary condition unless the messages repeat several times. (javax.resource.ResourceException: Failed to start the connection)>
I deployed the JMS adaptor also in weblogic10.0.
Could you please tell me the reason for the error?

A problem occurred with a Messaging Bridge between two JMS topics running in two Managed
Servers in the same domain, running on the same machine. As the Messaging Bridge was being
started during WebLogic Server startup, it threw the following warning message. Messages
could not be forwarded.
Analysis revealed that the bridge failed to create the message listener because it was
configured for durable topics and there was no JMS store available. The Bridge encountered an
internal error when trying to log the resource exception so the customer was not able to tell
why the bridge was failing.
The problem was resolved by a code change to allow the bridge to throw the correct resource
exception. Now, the correct exception is logged by the bridge.

OSB error Pending resource availability

In Oracle Secure backup getting error Pending resource availability while starting the backup.
but restoration is working fine with the same tape..
Please help me ASAP.
Thanks & Regards,
Maruthi.G,
*** phone number removed by moderator - this is not an official support channel and personal contact details should not be included ***

Hi.
When I try to start a backup schedule, the catxcr command show the message : "No volume could be found in lib1 (for drive tape1) to use for job admin/7.1."
I don´t know the reason, because I insert a volume.
Please help.
root@bgtd T4# lsvol -L SL150 -l
bash: lsvol: command not found
root@bgtd T4# obtool lsvol -L SL150 -l
Oracle Secure Backup 10.4.0.3.0
Warning: auto-login failed - login token has expired
login: admin
Password:
Inventory of library SL150:
    in    1:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    2:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    3:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    4:             volume OSB-CATALOG-MF-000001, barcode JK1145L5, oid 100, 1480140800 kb remaining, expires 2015/03/12.15:20, mediainfo hw encryptable
    in    5:             vacant
in
dte:
vacant
ob> lsdev --long SL150
SL150:
Device type:
library
Model:
[none]
Serial number:
[none]
In service:
yes
Debug mode:
no
Barcode reader:
default (hardware-selected)
Barcodes required:
no
Auto clean:
no
Clean interval:
(not set)
Clean using emptiest:   no
Ejection type:
auto
Min writable volumes:   0
UUID:
3d467542-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/changer/c4t500104F000D7B072d1
tape1:
Device type:
tape
Model:
[none]
Serial number:
[none]
In service:
yes
Library:
SL150
DTE:
1
Automount:
yes
Error rate:
8
Query frequency:
[undetermined]
Debug mode:
no
Blocking factor:
(default)
Max blocking factor:
(default)
Current tape:
[unknown]
Use list:
all
Drive usage:
23 seconds
Cleaning required:
no
UUID:
71373288-9944-1032-9254-c8c374159d95
Attachment 1:
Host:
bgtd
Raw device:
/dev/scsi/sequential/c4t500104F000D7B072d0
ob>

SFC problem - "Windows Resource Protection could not start the repair service"

We are trying to attempt to fix a Windows 2008 start up problem. We boot the machine from a Windows 2008 CD and go to the repair tool - command prompt.
When we do the command sfc /scannow, we are getting
"Windows Resource Protection could not start the repair service"
We did some researches there someone suggested the trustedinstaller is not running so we tried to do a net start trustedinstaller.
But We are getting
"The windows modulers instaler service is starting
The windows modulers instaler service is starting could not be started
A system error has occured
System error 1067 has occured
The process terminated unexpectedly. "
Anyone can give us an idea to see why we can not run the sfc the first place. Thanks

SYMPTOMS:
All attempts to run command:
sfc /SCANNOW
keep returning the following message:
"Windows Resource Protection could not start the repair service"
SOLUTION:
If you are using any kind of boot image/disk to boot up, you will have to use the "offline" switches (OFFBOOTDIR & OFFWINDIR) along with the SFC /SCANNOW command in order to start repairing your instalation properly.
please remember to tripple-check for corret partition letters, because this is a crucial parameter for SFC to start working properly.
also make sure to confirm whether so called "recovery" partion exists in your specific scenario or not. If so, in most cases this will render the "recovery" partition being the one to be set as a boot partition (OFFBOOTDIR) within sfc command, while Windows
system folder (OFFWINDIR) will actually reside on a different partition.
My scenario is described exactly above and therefore in my case boot partition letter was C: and system partition was D: ...As of that - the proper command line to run SFC successfuly was:
sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\Windows
Successful scan for integrity of all protected system files and replacement of incorrect versions with correct Microsoft versions then looks like this:
X:\sources>sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=d:\WindowsBeginning system scan. This process will take some time.Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.logwindir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log
Once SFC scan completed, I have run the Startup Repair from the repair dialogue menu prior rebooting the system. Remember to click "Cancel" on the prompt for using the System restore in this step. I am assuming you have tried this already time ago and confrmed
it did not resolve the problem, but most importantly - you really would not want to overwrite the files, which you have just repaired with any possibly corrupted ones ;)
After this I've unplugged bootable USB key with the My Windows Vista Enterprise 64bit setup disk image and restarted computer. System booted up properly on first attempt. No issues have been identified as a result of my post boot checks. This completely
resolved the issue in my case. Should you have questions, please let me know.
Pavel

Nieoczekiwany b∏àd: Error opening resource fork of Dict -35

Anybody have any idea what the following error message during load of CS3 apps (I get it in ID, PS, and AI) might mean?
Nieoczekiwany b∏àd: Error opening resource fork of Dict -35
I was recently forced to upgrade to Leopard, and ever since then I have gotten this error, but only on this machine (first gen MacBook Pro 1.83 GHz 15"), but not on an iMac I installed it on to try to to identify the problem's source.
I did a clean system install and then Migration Assistant to bring in my apps and user accounts. But I since completely uninstalled CS3 from my machine (and even did a manual search to get rid of Adobe debris on the hard drive), but it is still there upon a reinstall. If I could figure out what this weird mix of Polish and English means and what error code -35 is, I might be able to fix the problem. There is some other general weirdness as well, like text export from InDesign failing or producing weird results like looping through three paragraphs multiple times and leaving everything else in a story out (or exporting NOTHING), and I wonder if these are related.
(For what it's worth, I tried running CS3 in a new user account and got the identical error!)
Best,
Arle

Thanks for the suggestion, but I'm hoping to get more specific on the error to resolve it without the many hours of work needed to rebuilt a user account from data only and reinstall every application. Chances are that a single file somewhere is corrupt or need to have something done (like a change in permissions).
Frankly, I'd rather live with a modal error box popping up when CS3 applications start because rebuilding from the ground up is an even bigger pain...
I realize that you're telling me the "right thing" to do, but it is something like telling someone with indigestion to get their stomach pumped in terms of the inconvenience it will cause relative to the actual problem.
-Arle

FAST Search - Unable to Complete Query on BackEnd resource limit remporarily exceeded code:1013

Hi ,
We are using FAST search in our SharePoint 2010 environment. I am encountering an issue while navigating to 21st  page or Query string value 200 and above (
URL -> /Pages/results.aspx?k=1&s=All&start1=201
) in search core result web part. The error message is UI is "
The search request was unable to execute on FAST Search Server".
I have found the below log in the ULS .
SearchServiceApplication::Execute--Exception: Microsoft.Office.Server.Search.Query.FASTSearchQueryException: Unable to complete query on backend Resource limit temporarily
exceeded Code: 1013
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.GetQueryResult(IQuery query)
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.ExecuteSearch(SearchRequest request, String queryString)
at Microsoft.Office.Server.Search.Query.Gateway.AbstractSearchGateway.Search(SearchRequest request)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.ExecuteSearch(SearchRequest request, ResultTableCollection rtc)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.Execute(QueryProperties properties)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Execute(QueryProperties properties)
Please share your thoughts or advise if some has come across this issue. Thanks!

Hi ,
We are using FAST search in our SharePoint 2010 environment. I am encountering an issue while navigating to 21st  page or Query string value 200 and above (
URL -> /Pages/results.aspx?k=1&s=All&start1=201
) in search core result web part. The error message is UI is "
The search request was unable to execute on FAST Search Server".
I have found the below log in the ULS .
SearchServiceApplication::Execute--Exception: Microsoft.Office.Server.Search.Query.FASTSearchQueryException: Unable to complete query on backend Resource limit temporarily
exceeded Code: 1013
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.GetQueryResult(IQuery query)
at Microsoft.Office.Server.Search.Query.Gateway.FastSearchGateway.ExecuteSearch(SearchRequest request, String queryString)
at Microsoft.Office.Server.Search.Query.Gateway.AbstractSearchGateway.Search(SearchRequest request)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.ExecuteSearch(SearchRequest request, ResultTableCollection rtc)
at Microsoft.Office.Server.Search.Query.FASTQueryInternal.Execute(QueryProperties properties)
at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.Execute(QueryProperties properties)
Please share your thoughts or advise if some has come across this issue. Thanks!

ERROR 5133 - Resource Limit at slapd start

Similar Messages

Maybe you are looking for