Error 517 message

I have read some of the other posts regarding the error 517 message but a lot of the replies make no sense to me. I need a "how to for dummies" I don't have as computer to update anything. Does that mean I'm SOL... Please any advice

Yes you will need a computer to fix this or take it to the store and they can reload the software for you.
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Similar Messages

JVT ERROR 517 message on Curve 8310

SO my mom dropped her phone at work today. She noticed the battery pop out along with the back, and scurried to put it back together and go back to work...
Well when she comes home, she gives the phone to me and it has a blank white screen with the message that says "JVM ERROR 517"
I tried taking the battery out and putting it back in, didn't work. I tried clicking the one option that says "reset" but that didn't work either.
HELP? Please? She has important calls to make and we need this fixed ASAP if possible. I noticed the media card is missing, is relevant? Does she need to find it/ get one?

Take a look at this thread with the provide solution by ViciousFerret
http://supportforums.blackberry.com/t5/BlackBerry-Curve/8310-JVM-Error-517/td-p/1589125
Warning: The following procedures delete either all data, or all data and applications on the BlackBerry smartphone.

JVM Error 517 cause?

Hey, quick question.
Yesterday after turning my phone on i got that JVM Error 517 message, after looking on here i found a solution to fix it (you brainy people!), turned out it had no software so its all fixed now, my question is what causes it? I was using my phone normally the same day, i never downloaded anything or clicked on anything dangerous so how did my software just go?
It dont really matter, im just curious.

http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
That did it for me. Basically you need to download the Software and put it back on your phone, its fairly simple if you follow those instructions.
Let me know how it goes.

Error Message JVM Error 517

Help!!!
JVM Error 517 just showed up on my 2 yr old Torch and I can't get out of this field. It's locked.
What doesthismean?? I'min NJ in the middle of this hurricane and need phone as my communications vehicles.

It means that your BlackBerry is totally useless until your reload the OS. Plug your phone in to your PC and open BlackBerry Desktop Software. Once the software sees that you don't have an operational OS loaded to your phone, it will suggest loading one. Just follow the prompts and you should be fine.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

JVM error 517?

Had this come up, went online and found out how to sort it via software update but it said it was backing up my stuff and now I can't find it, is it gone for good? And no I don't have blackberry desktop even though I'm sure it said I had to download it, and if it said that then I'm sure I would have!

So do you need help resolving this Error 517?
Article ID: KB19442 Hardware related JVM error codes
1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Article ID: http://www.blackberry.com/btsc/KB10144
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 9220 jvm error 517

hi dears,
pls help me to solve this error my bb set hang with showing a messege - jvm error 517, how can i solve this?

1) Make sure you have Blackberry Desktop Manager installed.
http://na.blackberry.com/eng/services/desktop/
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Article ID: http://www.blackberry.com/btsc/KB10144
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Itunes wont open/ immediate "send error report message"

So I had a problem with me trying to install itunes 7.3 because of a missing itunes.msi. I followed the instructions i found from this forum as follows
"1. Go to http://www.ccleaner.com/ and download and install CCleaner. Run this program and click Run Cleaner. This program will remove most of your temporary files.
2. Go to http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe and download and install Windows Install Clean Up utility. Click on iTunes and click Remove. Do the same for Quicktime.
3. Now you need to manually delete all of your iTunes and Quicktime files. This can take a very long time. Just go to C: and start searching through.
4. Go to the Run box and type in "regedit". Go through all of the folders in there and delete all iTunes and Quicktime files.
5. Go to Add/Remove Programs and Remove iTunes and Quicktime.
6. Download iTunes again and install it."
I then tried to open itunes and immediately a message pops up asking if i want to send an error report to microsoft. It seems as though step 4 might have truly made things worse.
Someone please help
Windows XP

After you get the send error report message go to:
Start -> Control Panel (In classic view which can be enabled by clicking view classic.) -> Administrative Tools -> Event Viewer.
Select the Application log and look for the most recent errors (Marked by a red X).
Double click on the error and it will show you a full description. For an error similar to the one you are recieving it should report a 'faulting module' in the error.
Please paste that here. This will help us help you.

Itunes get "Send Error Report" message

Alright so when I try and open itunes I get a send error report message. I've tried updating it and that doesnt work and I've already tried reinstalling it. I thought quicktime was the error so I went to try and remove it from my computer. As it was loading to remove quicktime I got a "fatal error" message and quicktime could not be deleted.
Help please?
Message was edited by: Joshua Malin

Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.1 reinstall.
download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Fan error 90b message on start up

Getting fan error 90B message upon startup. Says computer will shutdown in 15 seconds, or hit enter to proceed to login. I cleaned the vents with compressed air...the fan is running and air circulating, and even chatted with tech support and upgraded BIOS as suggested by them. Still getting message, but computer seems to working fine. ANY IDEAS???

Hello Petecruz,
You have reached the HP forums, unfortunately we do not support IBM computers here is the link for IBM to help you with your issues.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Itunes 7 error report message

i recently downloaded the new itunes, and it messed up everything. I ran the install program and when i tried to run the program, i get an error report message. It says that the program cannot open. I have tried unistalling, and redownloading, and nothing works. I also tried to revert to 6.01 version, but that didnt work either.Im running a dell, with os windows xp. any help would be much appreciated.

let's get a crash log to the Apple Engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing (if you are seeing one)

ITunes "Send Error Report" Message/Quicktime Problem

This is a problem that has only occured after I updated my iTunes to 7.0.2. Some songs in my library, and all of my videos that I have bought through the Music store cause the "Send Error Report" message to come up and iTunes closes down immediately.
I read another thread that a similar problem was occuring to a customer, and one of the admins requested him to un-install Quicktime and delete 2 files out of the registry. Then re-install quicktime through the "Repair" section of the iTunes installer. I followed these steps and the problem seemed to be fixed, but then they were "re-corrupted" I guess after I restarted my computer.
Do you have any idea what would be wrong? I know it is not spyware/viruses because I have several programs to check/delete them.
Thanks for your help
-jcavanagh.

Bump for the 3rd time.
Quicktime will not even open, on a sidenote. It starts to load, then I hear some sort of beep..then it closes. I have tried re-installing multiple times and the problem continues.

I just tried to update my iPhone4 to iOS7 and after downloading, I got an error "4005" message; Now my iPhone is completely wiped out and I can't even get my pc to read it (just has a picture of the USB and the iTunes icon). HELP!!

I tried updating my Iphone4 from iOS 6.1.4 to 7 via iTunes. After downloading, I got an error 4005 message during installation and now my phone is completely wiped out; is not being recognized by my PC; and all I get on the phone is a photo of a USB plug and the iTunes symbol! Can anyone, PLEASE, help?!?

The phones in recovery mode so if yu connect it to itunes it should ask to restore it back to the last back up you have done.
that should solve it for you...

I did the iTunes update and now I am getting a Windows error 126 message.

I did the iTunes update and now I am getting a Windows error 126 message. Now I can't use iTunes at all. Any ideas?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99606)

Error 517 message

Similar Messages

Maybe you are looking for