ERROR 561! PLEASE HELP!

Ok, so my phone (blackberry torch) is displaying the error message 561, and when I try to download the software it'll say that it cannot detect my device and to enter the password or retry. My phone will reboot every minute or so (showing blackberry with the white loading bar) I've tried doing this w/o the battery, inserting the battery back in etc etc. I've removed the desktop software and re-installed. so on, and so forth but it still won't "detect" my device. I've alos tried the jl_cmder to wipe it and still NOTHING. help?!

I had that happen to me a few weeks back and eneded up having to send it in for repair..
It sounds like the same problem..I think you may have to send it back to blackberry for repair..they eneded up sending me a new handset.

Similar Messages

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

Error 1001 - please Help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists.

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

WWS-32136 UTL_HTTP error. Please help

Hello,
I am trying to get all content area content
to show up inside the folder(or area). When I want to get WebDB reports or external sites
to display within the content area, I get
a utl_http error. Here is what I did:
1. Create a Content Area
2. Create an item or type URL
3. Check the "link displays item in folder area" as the display options attribute.
When I click on the link, webdb reports take
up the entire page, while external url or
external apps (like giving a link to www.oracle.com) ends up giving me a utl_http error.
Please help !!
Sanjay

Sanjay
Did you review the looking at the troubleshooting guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
Seaching this page using the keyword 'utl_http' returned a likely solution:
Cause: This is most likely happening because of a bug in the UTL_HTTP package that shipped with early versions of the Oracle 8.1.6 database on Windows NT.
Solution: You must download and install the 8.1.6.2 patch from http://metalink.oracle.com (click patches, and then select "product: Oracle Server - Enterprise Edition", "platform: MS Windows NT"). You must be registered to use Metalink.

Export error. Please help

Hi ALL,
When i try to export the database i am getting the following error. Please help
C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully
The version of the db and export utility is same as u see from below.
C:\>sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Regards
Arun Kumar

One of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.

I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

I have downloaded adobe download assistant but when ever i click on sign in it says 'error communicating with adobe (error 100). please help.

Boskou41043636 for information on how to resolve error 100 please see Troubleshoot Adobe Download Assistant.

JSP error? Please help!

JSP error? Please help!
I am new to JSP, I got a project using jsp. So I tried something very simple, when I try to execute .jsp, I got the following error msg:
Request URI:/ifs/jsp-bin/ifs-cts/stringjavajsp.jsp
Exception:
oracle.jsp.parse.JspParseException: Line # 9, Error: Unable to find class for bean: stringjsp defined by tag with class: strbuffer
the part of .jsp as following:
<%@ page import = "strbuffer" %>
<%! String errString; boolean validation=false;%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<title>string manipulation</title>
</head>
<jsp:useBean id="stringjsp" scope="page" class="strbuffer" />
<%
String String1=request.getParameter("string1");
String String2=stringjsp.stringappend(String1);
%>
The .java code as following:
import java.lang.*;
import java.util.*;
public class strbuffer {
public String stringappend(String string1) {
String i=string1;
StringBuffer j=new StringBuffer(i);
j.setCharAt(2,'x');
j.insert(5,'k');
j.append("zzz");
i=j.toString();
System.out.println("the changed string is "+i);
return i;

Or maybe you've compiled your Bean class with the wrong package declaration. And make sure that you've compiled it with a directory structure matching your declared package.

ERROR 561! PLEASE HELP!

Similar Messages

Maybe you are looking for