Error 6 message Elements 8 on opening on Intel iMac

I recently had problems with my iMac and it has had to be reformatted and all software added back on. The OSX I'm running is Mavericks.
My Photoshop Elements 8 was working perfectly before I had computer problems. Since re-installing PSE8, when I try to open it, I get the message error 6 contact Adobe Support. Any idea how to get round this?
According to the box I had when I bought PSE, it says it operate on the Intel macs so that shouldn't be an issue.
Thanking you in anticipation.

it says it operate on the Intel macs so that shouldn't be an issue.
...but OSX 10.9 might. No doubt there is simply some component missing that you forgot during your system reinstall, most likely some legacy system library that was left in place from an older version of OSX. Or, which may be a simpler explanation, you need to fix permissions e.g. on the Library folders...
Mylenium

Similar Messages

I have error 6 message when trying to open cs4

When i open my cs4 i have an error 6 message. I have been using this for 4 years with no problem and now it shows me this! This is so frustrating!

Try these help pages:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
or
Error "Licensing has stopped working" | Mac OS

Get error 7 message when trying to open iTunes in windows vista

All of a studded my windows vista 64 bit computer will not open iTunes. It has a error 7 message. I have tried removing it according to supports instructions with no luck. One problem that I had is that it told you to delete the iTunes folder in the common files and it would not let me do that but everything else deleted.still no luck when I reinstalled, any help would be appreciated. I also tried updating the net framework, no luck.
Thanks in advance,
Karlluch

Karlluch...
Try here > iTunes for Windows: "Error 7" message when opening iTunes

Error This message can't be opened

I am running 10.2.0.429 currently. However, since updating from 10.0, I have been unable to open any Notifications from the Hub. When I select a notification, the view switches to a new window that says:
Error
Date label area
This message can't be opened
Any help resolving this error?
NOTES
I have updated the OS gradually (2 or 3 times now?) from the originally installed OS 10.0. Getting to the current OS was not a one-step jump.
I used to be able to update my apps directly from the Notification section of the Hub. Now I get the notification and must go to BlackBerry World to update it, which is much less convenient (and annoying).
This is not a new error, I had hoped that the most recent update would fix the issue.
~William
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools." Douglas Adams

Not if the error code should be visible on the screen, I am not.
All I see is the blue bar across the top of the window that says "Error" and "Date label area", and then the message area says "This message can't be opened"
~William
"A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools." Douglas Adams

"Send Error Report" Message When Trying to Open iTunes

I've looked for two days to find a solution to this problem and tried everything I've come across. Nothing has worked so far, and every time I try to open iTunes I still get the "send error report". I know that that does nothing. I've un-installed and re-installed both Quicktime and iTunes and it doesn't work. I've tried to see if it will work on another account on the same computer but it doesn't work. What is the next step?
Thanks!

Good-O. Not seeing an error message there rules out another possible set of problems, so we're still making progress.
Okay, we'll try swapping out your existing QuickTime one more time, taking a few extra explicit precautions along the way.
First, download and save a fresh copy of the QuickTimeInstaller.exe to your hard drive. (Don't run the install on line and don't run the install just yet.) Get the installer that doesn't mention iTunes:
http://www.apple.com/quicktime/download/
Now head into your "Add or Remove Programs" control panel and uninstall QuickTime.
Next we'll remove any leftover QuickTime program files and folders.
Restart the PC.
Open Local Disk C: or whichever drive your program files are installed on.
Open the "Program Files" folder.
Right-click the "QuickTime" folder (if it still exists) and select Delete.
Go back into Local Disk C: or whichever drive your Operating System files are installed on.
Open the "Windows" folder.
Open the "system32" folder.
Right-click on the QuickTime file (if it still exists) and select "Delete".
Right-click on the QuickTimeVR file (if it still exists) and select "Delete".
Empty your Recycle Bin and restart the PC again.
After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now disable all your security software (firewall, antivirus, antispyware).
Now start the QuickTime install by doubleclicking on the QuickTimeInstaller.exe file you downloaded earlier.
Reenable all security software prior to reconnecting to the internet and/or your network.
Did that install seem to go through okay? If so, does QuickTime launch normally this time?
Message was edited by: b noir

Error (13013) message when trying to open itunes.........

I have just installed itunes - and now it says 'The itunes application could not be opened. An unknown error occured (13013)'
Any ideas?
I want to play with my new Ipod touch

I am not certain bout this particular error number but it may be related to your library.
Try deleting the file "iTunes Library Genius.itdb" in your iTunes folder
If that doesn't work, try rebuilding your library.
Drag iTunes Library.itl and iTunes Music Library.xml out of your iTunes folder.
Start iTunes, hopefully it will start with an empty library. Use this article to recreate your library:
http://support.apple.com/kb/HT1451
Let me know if either works as I would like to document this error number.
Message was edited by: polydorus

Error 2 message when opening on vista

I recieve an error 2 message when trying to open itunes on my computer. it tellls me something about a missing help file and to reinstall itunes.. i have done this 3 times so far and i have vista. I recently had to reformat my computer and never had a problem installing itunes before.. what is wrong?

(Apologies for barging in, wha.)
The 2 usually indicates that Apple Application Support hasn't installed.
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error 16 message when transferring Photoshop Elements to new Mac. What am I doing wrong?

I am attempting to transfer my licensed copy of Elements to a new iMac. I've copied all the relevant files/folders from the old Applications folder to the new, and on trying to open the program on the new machine receive an Error 16 message (uninstall/reinstall). The original applications was a download, so I don't have an install disk. I'm obviously missing some files - any suggestions? Many thanks for any help!

Do as it says - reinstall it properly.
Download Photoshop Elements products | 13, 12, 11, 10
Mylenium

After migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"

You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC.

Can't open PSE 10. Get error 400 message. Help!!!

Loaded photo shop elements 10 onto a clean hard drive but now it won't open. Get error 400 message after logging in. How can I fix this problem?

There is no longer anything to log-in to.
see this for more info and solutions:
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

Itunes wont open/ immediate "send error report message"

So I had a problem with me trying to install itunes 7.3 because of a missing itunes.msi. I followed the instructions i found from this forum as follows
"1. Go to http://www.ccleaner.com/ and download and install CCleaner. Run this program and click Run Cleaner. This program will remove most of your temporary files.
2. Go to http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe and download and install Windows Install Clean Up utility. Click on iTunes and click Remove. Do the same for Quicktime.
3. Now you need to manually delete all of your iTunes and Quicktime files. This can take a very long time. Just go to C: and start searching through.
4. Go to the Run box and type in "regedit". Go through all of the folders in there and delete all iTunes and Quicktime files.
5. Go to Add/Remove Programs and Remove iTunes and Quicktime.
6. Download iTunes again and install it."
I then tried to open itunes and immediately a message pops up asking if i want to send an error report to microsoft. It seems as though step 4 might have truly made things worse.
Someone please help
Windows XP

After you get the send error report message go to:
Start -> Control Panel (In classic view which can be enabled by clicking view classic.) -> Administrative Tools -> Event Viewer.
Select the Application log and look for the most recent errors (Marked by a red X).
Double click on the error and it will show you a full description. For an error similar to the one you are recieving it should report a 'faulting module' in the error.
Please paste that here. This will help us help you.

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
Thank you in advance
Best regards
Alexei Soloviev

Hi Steve
I have problems with the 34401A and serial communication. Do you remember
where the error was in the code ?
Thanks
Klaus
wrote in message
news:[email protected]..
> Alexei,
> This may or may not help, I was tasked to do something similar
> recently and found an error in their driver. The GPIB VISA worked
> fine, but when I tried it on serial it played up. There was an errant
> carriage return (or CR/LF I can't remember). GPIB liked one and Serial
> liked the other. It always amuses me that we never have problems with
> Quickbasic!.
> If you want me to dig deeper give me a shout.
>
> Steve Watts
>
> On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
> wrote:
>
> >When trying
to work with Agilent 34401A multimeter (serial RS-232
> >connection), HP34401A Getting Started.vi gives always the message:
> >"Error 1073807369 occurred at Old VISA Open ".
> >
> >Baud rate and parity are set correctly, RS-232 cable is also connected
> >correctly. My QuickBasic program has no problems to read and write to
> >the Multimeter. It is obviously a software problem: the same error is
> >persistent if I disconnect RS-232 cable.
> > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
> > digital.ni.com and installed it. But it did not help.
> >Thank you in advance
> >Best regards
> >Alexei Soloviev
>

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

When trying to open iphoto I get the error message "You can't open the application iPhoto because it may be damaged or incomplete." How do I fix this and get my photo's back?

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

Error 6 message Elements 8 on opening on Intel iMac

Similar Messages

Maybe you are looking for