Error (-60) in Windows 7 while installing Dreamweaver
Other apps load fine.
cfcu_vleo, Could you try that again and check. It should be a temporary error.
If same issue, reboot the machine and retry.
Let me know if you still get this issue.
Similar Messages
-
Critical error found while installing Dreamweaver CS4
Hi guys!
Please help me. I can't install my dreamweaver CS4 and I got this error message
"Critical errors were found in setup for Adobe Dreamweaver CS4
Session has dependencies than cannot be satisfied.
The installer database is invalid: please re-install the
product from the original media
Please see the Setup log file for details. Click Quit to exit setup."
this is my first time to install this application. is there anyone who can help me out there?
I did everything that I can do. I already cleanup my system using cs4 clean up utility and its still the same.
Please help me solve this problem thanks....1-800-642-3623
-
Error "Specifed Key not found" while installing Oracle 11g R2 db
Hi,
I am new to installing oracle 11gr2 DB. While installing at the stage of "install product" during the process of .Copy files its throwing the following error
*Specified Key not found
Please help me solving this problem. Your help is much appreciated.
Thanks in advance.979400 wrote:
Hi ..
I am getting the "Specified Key not found" while installing Oracle 11 g r2 on windows 8 (64 bit) and below is the installation log , Please help me .
Number one - you are hijacking someone else's thread. Please read the forum FAQ. The link to that is conveniently located in the upper right corner of this very page.
Number two - no oracle product is certified to run on Window 8. If you want to run an Oracle product, you need to use an OS which Oracle has certified for said product.
ID: oracle.install.driver.oui.OUISetupDriver:13
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #-----------------------------
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:16
oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:248)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4538)
at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:4487)
at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6382)
at oracle.install.driver.oui.OUISetupDriver.verifyEnvironment(OUISetupDriver.java:299)
at oracle.install.driver.oui.OUISetupDriver.load(OUISetupDriver.java:422)
at oracle.install.ivw.db.driver.DBSetupDriver.load(DBSetupDriver.java:161)
at oracle.install.commons.base.driver.common.Installer.run(Installer.java:216)
at oracle.install.ivw.db.driver.DBInstaller.run(DBInstaller.java:129)
at oracle.install.commons.util.Application.startup(Application.java:869)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:117)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:148)
---# End Stacktrace #----------------------------- -
Hi all,
Pre-installation:
I install the oracle with user "oracle" which belongs to "dba" group.
The environment variables are
PATH=/usr/sbin:/usr/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,Ultra-80/sbin:/opt/sun/bin:/opt/SUNWexplo/bin
LD_LIBRARY_PATH=/usr/openwin/lib
OPENWINHOME=/usr/openwin
ORACLE_OWNER=oracle
Also, i created /oracle folder for the installation of oracle
Synonym:
While installing oracle, I was encountered the error in invoking target ntcontab.o of makefile /oracle/OraHome92/network/lib/ins_net_client.mk while installing Oracle 9.2.0.1.0 in Solaris 9 unix machine.
The content of /oracle/OraHome92/install/make.log is as follows
/usr/ccs/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/oracle/OraHome92
(if [ "assemble" = "compile" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
(if [ "assemble" = "assemble" ] ; then \
/oracle/OraHome92/bin/gennttab > ntcontab.s ;\
/usr/ccs/bin/as -xarch=v9 -P -o ntcontab.o ntcontab.s ;\
rm -f /oracle/OraHome92/lib/ntcontab.o ;\
mv ntcontab.o /oracle/OraHome92/lib ;\
/usr/ccs/bin/ar rv /oracle/OraHome92/lib/libn9.a /oracle/OraHome92/lib
/ntcontab.o ; fi)
Error in finding run directory. Using default /opt/SUNWspro/binerror: Unable to
find current directory
*** Error code 1
make: Fatal error: Command failed for target `ntcontab.o'
Could anyone give me a suggestion how to fix the problem.
It's urgent
Many thanks,
KelvinIf someone having above problem....
umount partitions where installing oracle and then check perrmisions to mount point and mount back.
This work for me.
Thanks -
Error in Create Database Instance while installing NW_JAVA_700SP14_SR3
hi frds
i am getting an error while installing NW_JAVA_700SP14_SR3
the error comes in the Step 13 Create Database Instance
the details are
> Subprocess starts at 20080627004121
Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n Trust_In_ME -d J2E -u CONTROL,******** load_systab -u SUPERDBA,******** -ud ********
Execute Session Command : exit
> Subprocess stops at 20080627004147
> Subprocess call failed
ERR
-24964,ERR_EXECUTE: error in program execution
3,""C:\sapdb\J2E\db\bin\x_python" "C:\sapdb\J2E\db\env\lsystab.py" -R "C:\sapdb\J2E\db" -d J2E -u SUPERDBA,********
Removing obsolete objects
Installing Loader tables
Installing messages and help
Installing SYSDBA tables
Installing comments for SYSDBA tables
Installing precompiler tables
Installing system tables for R3 backup information
Installing ODBC tables
Traceback----
File "C:\sapdb\J2E\db\env\installib.py", line 401, in connectAndInstall
installRoutine (session, options)
File "C:\sapdb\J2E\db\env\lsystab.py", line 190, in install
"DBANA"
File "C:\sapdb\J2E\db\env\installib.py", line 163, in include
install (session, options)
File "C:\sapdb\J2E\db\env\ODBC.py", line 111, in install
Command----
DATALOAD TABLE BASETYPES
"TYPE_NAME" 1
"DATA_TYPE" 2
"PRECISION" 3 DEFAULT NULL
"LITERAL_PREFIX" 4 DEFAULT NULL
"LITERAL_SUFFIX" 5 DEFAULT NULL
"CREATE_PARAMS" 6 DEFAULT NULL
"NULLABLE" 7
"CASE_SENSITIVE" 8
"SEARCHABLE" 9
"UNSIGNED_ATTRIBUTE" 10 DEFAULT NULL
"MONEY" 11
"AUTO_INCREMENT" 12 DEFAULT NULL
"LOCAL_TYPE_NAME" 13 DEFAULT NULL
"MINIMUM_SCALE" 14 DEFAULT NULL
"MAXIMUM_SCALE" 15 DEFAULT NULL
"SQL_DATA_TYPE" 16
"SQL_DATETIME_SUB" 17 DEFAULT NULL
"NUM_PREC_RADIX" 18 DEFAULT NULL
"INTERVAL_PRECISION" 19 DEFAULT NULL
"REMARKS" 20 DEFAULT NULL
INFILE 'c:\docume1\mehta's\locals1\temp\tmpnxyvvp'
COMPRESSED
SEPARATOR '|'
DELIMITER ''
Error----
loader.LoaderError: [-25501] Error opening file ''c:\docume1\mehta's\locals1\temp\tmpnxyvvp'': OS error: [123].
can anyone help me to resolve this issue
Regards
JMHello John,
some basics:
1. Is the drive formatted with NTFS?
2. Are you using an local or domain user?
3. Are there any antivirus- and/or firewall-programs installed? If so, please deactivate them while installing.
4. Is the computer connected to an network or if not did you install the loopback-adapter?
Regards,
Norman Schröder -
Error 5 while installing Dreamweaver CS6
My system is a Window 7 64-bit, and I try instal the Dreamweaver CS6, but the Dreamweaver try install the Visual Studio for systems 32-bit, and returns the error 5.
How I can change for install the Visual Studio (x64)?Hi Vitimao,
Could you please share the log files from following location this will help in debugging this issue:
Winx64: <Root Drive>\Program files (x86)\Common files\Adobe\Installers -
Error JREW.EXE stopped working while installing oracle 9i on windows vista
Hi,
When installing oracle9i Database on wndows vista premium home edition it gives jrew.exe has stopped working. Can anybody help me to solve this.
Thanks
SreeChoose a supported configuration. NO Oracle software is supported on any Windows home edition. First supported database version is 10.2.0.3 for Vista.
Werner -
Error at step 42/45 while install Solution Manager 4.0
Hi SAP guru,
I'm install Solution Manager 4.0 on Windows 2003 R2 with Oracle10g
and JSDK 1_4_2_16, while facing step 42/45 (Configure System Landscape Directory). Its shown error below.
ERROR 2008-01-17 16:02:04
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-17 16:02:04
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
Any solution for this problem?
PS. I was ran sapinst.exr SAPINST_SKIP_ERROR=true on step 39 (Install Software Units) after set SDM mode = integrated.
Thanks in advanceHi Snehal,
The log I paste above was too many days ago. Thus, I'm get a new one from Log Browser for you.
ERROR 2008-01-21 19:05:35
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
and this from sapinst_dev.log as your requested.
INFO 2008-01-21 19:05:35
CJSlibModule::writeInfo_impl()
Execution of the command "C:\j2sdk1.4.2_16\bin\java.exe -classpath E:/usr/sap/SOL/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ com.sap.ctc.util.ConfigMainExt XXXXXX ahosapso:50100 J2EE_ADMIN XXXXXX" finished with return code 0. Output:
TYPE=A<BR>STATE=401<BR>INFO_SHORT=Error connecting to http://ahosapso:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SecurityRoleConfig;MAP_SECURITYROLE_TO_USER;ROLE=DataSupplierLD,USER=SLDDSUSER,COMPONENT=sap.com/com.sap.lcr*sld,HOST=ahosapso,P4PORT=50104,J2EE_ADMIN=J2EE_ADMIN,J2EE_PASSWORD=des19(66|31|151|231|117|153|233|51|218|54|). The provided user data might be incorrect or user might be locked.<BR>CONFIGURATION=
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.configError:
Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2008-01-21 19:05:35
CJSlibModule::writeError_impl()
CJS-30059 Java EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-01-21 19:05:35
FCO-00011 The step configSLDMainLocalMapSecRolesToUsers with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_SLD|ind|ind|ind|ind|0|0|configSLDMainLocalMapSecRolesToUsers was executed with status ERROR .
TRACE
<html><head></head><body><p>An error occurred while processing service <b>SAP Solution Manager 4.0 Support Release 1 > SAP Systems > Oracle > Central System > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>C:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
Edited by: jitpanu sriudomwat on Jan 24, 2008 3:47 AM -
WUSA error 5 0x80070005 Access Denied while installing KB2992611 & KB3003743 on Win 7
I'm having a well known problem while patching Windows 7 SP1 x86 systems, but none of the common fixes have worked. I'll use KB2992611 for examples throughout, but the exact same behavior is being seen with KB3003743.
Logged in as an admin and running an elevated command prompt, I try to install the patch as follows:
wusa.exe C:\Temp\Windows6.1-KB2992611-x86.msu /quiet /norestart
The event log shows a 0x80070005, Access Denied from WindowsUpdateClient, but nothing else interesting. If I remove the
/quiet switch or just double-click the .msu, the graphical installer gets through the "Initializing" phase, but then says "The following updates were not installed:" and lists the patch.
The CBS log (C:\Windows\Logs\CBS\CBS.log) suggests permission issues with stuff under C:\windows\SoftwareDistribution...
Info DPX Started DPX phase: Apply Deltas Provided In File
Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\f3e1d3177d3c4d4597f9494ac7b982ea.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, hr 0x80070005
Info DPX MoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
Info DPX DpxMoveFileExW failed, source: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\$dpx$.tmp\847db368c3d8b44092e372d302e831d8.tmp, destination: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\inst\x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.22814_none_a8db7e7cd42b04fa\lsass.exe, hr 0x80070005
Info DPX File could not be expanded, Source=x86_microsoft-windows-lsa_31bf3856ad364e35_6.1.7601.18606_none_a85eb04bbb037ec6\lsass.exe, Target=(null), status=0x80070005
Info DPX ProvideRequestedDataByFile failed, Response file Name: \\?\C:\windows\SoftwareDistribution\Download\fa848827d1bd908340ba44c76a28e7e8\Windows6.1-KB2992611-x86.cab
Info DPX Ended DPX phase: Apply Deltas Provided In File
(timestamps removed for readability)
...but other .msu files install without issue. I browse to C:\windows\SoftwareDistribution\Download\{string} and see that the Windows6.1-KB2992611-x86.cab file has been copied there.
The Windows Update log (C:\Windows\WindowsUpdate.log) has similarly unhelpful messages referencing error 80070005.
Intelligently interpreting procmon output may be above my pay grade, but the only ACCESS DENIED event that I see from TrustedInstaller.exe is while attempting a
SetRenameInformationFile on C:\windows\SoftwareDistribution\Download\{string}
I have tried the fix that involves using the subinacl utility to make sure that Administrators and SYSTEM have proper permissions in the registry (e.g., see support.microsoft.com/kb968003). I have also tried the fix that Kim proposes at the link below,
using subinacl to make sure that NT SERVICE\TRUSTEDINSTALLER has permissions where it needs...
answers.Microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-error-0x80070005-need-a-fix-click/e4cb8700-f215-4f1a-8bd4-6457ac619c19. I get the same errors after running their scripts as directed.
I am having this issue on multiple (near-) identically configured hardware from Dell & Fujitsu, so it is not just one flakey device. The systems are locked down via local GPO and run custom applications, so there is a chance that something wonky and
specific to my environment is causing this, but I'm out of things to check and try, so any ideas would be appreciated. Additional info available upon request.
ThanksHi,
I recommend you to follow these steps to have a fix.
1.Rename the SoftwareDistribution folder.
Open an administrative Command Prompt window.
Run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
2.Run this Troubleshoot tool to have a check.
To run the tool:
Control Panel\All Control Panel Items\Troubleshooting\System and Security\Windows Update
3.When you are installing the update, please log in the machine as an administrator. Meanwhile please turn off the antivirus software temporarily to install the update.
Best regards -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
Hi,
I just try to install the setup download from apple website for iTune and iCloud.
During the installation, there was error message prompt out "There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
I am using Window 7 32 bit. I have try several time for install, but the result is getting same error message.
Anyone can help on this??????
Thanks.
JustinI have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.
-
Error 11222 on Windows 7 when installing itunes 10.6.1
I am trying to access the iTunes store on my windows 7 64 bit PC but I can't access the store. At one point I got error 11222. I have uninstalled iTunes, ran a full security scan, then re-installed iTunes. No luck. Any ideas?
Also see this previous discussion if the above did not work
https://discussions.apple.com/message/11714808#11714808 -
Error of "File not found" while installing RAC
Hello Firends,
After succsssfully installing and running cluster manager on both the nodes ( it is 2-node Cluster), when I try to install oracle software, an error message window poped up stating the following message.
"File Not Found
/mnt/cdrom/Disk2/stage/components/oracle.pk2.proc/9.2.0.1.0/Datafiles/bin.1.1.jar"
Every time I ignore mesage it gives me another error message for differnt file name. So I stoped the installation.
According to this message it seems that there is no such file on the CD ( DIsk2) . I have a downloaded version of 9.2.0.1 from this site.
Please give me some suggestion on this.
Any type of response is highly appreciated.
Thanks
BhsvinHello Firends,
After succsssfully installing and running cluster manager on both the nodes ( it is 2-node Cluster), when I try to install oracle software, an error message window poped up stating the following message.
"File Not Found
/mnt/cdrom/Disk2/stage/components/oracle.pk2.proc/9.2.0.1.0/Datafiles/bin.1.1.jar"
Every time I ignore mesage it gives me another error message for differnt file name. So I stoped the installation.
According to this message it seems that there is no such file on the CD ( DIsk2) . I have a downloaded version of 9.2.0.1 from this site.
Please give me some suggestion on this.
Any type of response is highly appreciated.
Thanks
Bhsvin -
Proxy Authentication while Installing Dreamweaver Widget Browser (Mac)
Hi,
I have created the Adobe CS6 Web and Design Premium package using AAMEE 3.0. I have chosen to exclude adobe air and help. Exception folders have Adobe AIR Installer , Adobe Dreamweaver Widget browser and Adobe Help. ExceptionInfo.txt provides the list of commands to install the exceptions. While running the commands from the text file, Adobe AIR and Adobe Help works fine but Dreamweaver widget prompts for proxy authentication inspite of -slient parameter.
I am using the below command from ExceptionInfo.txt to install Widget Browser
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
Does this a common issue or do I need to change something in the command line?
Regards,
Karthikeyan MHi Karthikeyan
I haven't had the opportunity to confirm this with CS6 recently, but depending on the callback the air application makes, I have seen examples where using the -revocationCheck never command line flag could potentially make a difference. It would be interesting to see if it does under these specific circumstances with the widgetbrowser.
See http://blogs.adobe.com/simplicity/2011/08/disabling-air-certificate-revocation-checks-duri ng-silent-install.html and http://helpx.adobe.com/creative-suite/kb/creative-suite-deployment-proxy-log.html for some background.
Kind regards
Henk -
ENVY J049 tx showing no windows partition while installing ubuntu 14.04
I am trying to dual boot my laptop with ubuntu and windows(pre installed), But while installation process i choose something else option and it is total 1024gb of space present in it , i've tried to install it and it overwrites my 8.1, tried many things but still not showing any partition in it.
Hello @envyj049,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are trying to dual boot your notebook with Ubuntu and Widnows, and I would be happy to be of assistance!
In order to get your issue more exposure, I would suggest examining this document on Frequently Asked Questions About Linux (FAQs) as well as contacting Ubuntu Technical Support for further assistance.
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
How can I turn off the open bookmarks in new tab setting?
Can this be done - Open up the program and I have 38 windows,,,, Help!
-
How do i Install Oracle on 8.1.7 on Red hart Linus 7.0
Please can somebody give me deatils on how to install Oracle 8.1.7 on red hart linux 7.0.? Please this is very urgent as my Job is on the line
-
HI EXPERTS, We want to add a button or field when creating a contact with transaction BCT0. Anybody knows a User Exit related to this? Thanks in advance Nicolas SAP-ISU CS
-
Flex and multilanguage support for webUI
I am looking into Flex as the next-gen development system for our web apps. I do not know very much about Flex at this time, but I need to find out how Flex handles multilanguage capability. Currently, we make heavy use of JS and DHTML for our UI des
-
The Keyboard on my IMac Dosn't Seem To be Working Properly Most of Them Are Doing The Wrong Functions And Some Are Completly Dead Only A Few Work Please Help!