Error 602 on the white wall paper

hello there, i do have a torch 9860, the phone stared by not booting. then after the settings were defaualted, its now showing E602 on the white wallpaper. what can i do to repair it and to make sure it never happens again

Hello kagwah
Welcome to BlackBerry Support Forums
Try this Knowledge Base to recover your device from this error :
KB10144 : How to force the detection of the BlackBerry smartphone using Application Loader
No one can specifically say the cause of this error , if this error appeared after installing any application then you need to be careful and don't install any unknown app , but sometime those error may appear without any reason , those are Java errors in which a user can't do anything .So the most important thing is that we should do a regular backup of our device , as in your situation , while following this KB to recover your device you will loose all data within your device. I hope you have a previous backup from which you can restore .
Additional Information :
KB23950 : "App Error 602" appears on the BlackBerry smartphone.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Similar Messages

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

I would like to take off the new wall paper you just offered with today's update

in today's update one could place on the top(header) and bottom (footer) of the firefox site...I woul dlike to remove it...pretty, however difficult to follow the tabs.
Thank you

It sounds like you installed a theme or persona (light weight theme), for how to switch back to the default theme see [[using themes with Firefox]]

Looking for grey desktop wall paper at the start of MacBook Pro OSX Lion

Hey guys,
I really like the grey wall paper with light texture... the one when you start up MacBook Pro OS Lion and you log in. I'm wondering if anyone know where the file is hiding in computer or anywhere on web to download? I wanna set it as my desktop. It's really easy on the eyes and really clean look.
Thanks,

I'm going to back up to Firefox 7 next. I'm getting the drift that 8.0.1 and/or flash on 8.0.1 are unstable.
I'll let you know if that solves this problem.
NOPE. This had no effect.

Is there a way to bring out the white in the background?

I'm using Final Cut Pro version 5.1.4
I'm shooting a spec spot, with the same lighting set up as the popular Mac Vs PS spots...
Two actors against a white wall. The white wall we shot against has some color variations on it, due to lighting temperatures... Is there a way to key just the white area behind the actors and bring up the white in the background without over brighting the actors?
thanks!!

Find the luma key and try that. Or chroma key set to white.

Imac Lion wall paper

hi does anyone know where i can find the lion wall paper, the one the the big X next to the lion. Also since i upgraded yesterday, is there a new wall paper for mountian lion? there is nothing in my picture library, i looked.

Here you go. Take your pick:
http://wall.alphacoders.com/wallpaper.php?i=276987&lang=English

I have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS?

i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.

First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

Plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat.... i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead..... pl

i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s...
plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
the laptop doe read my phone.....
no ding.....
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on

mariidb wrote:
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s... {snip}
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on
That's the problem. That's what the **** is going on.

When inserting a .pdf of a document with a standard white paper color the test and images show up, but the white background is transparent. How do you also make the white paper color show up?

When inserting a .pdf of a document into a Keynote template with a standard white paper color the text and images show up, but the white background is transparent. How do you also make the white paper color show up?

Use the color fill option - select the inserted .pdf and assign a fill color of white to it using the Color Fill Menu on the Toolbar or the Color Picker Palette.
Good Luck.

I have a macbookpro. tryinhg to connect to new lg tv. I purchased a mine port to hdmi converter but it only shows a wall paper. it does show the mouse arrow???

I have a macbookpro. tryinhg to connect to new lg tv. I purchased a mine port to hdmi converter but it only shows a wall paper. it does show the mouse arrow???

it only shows a wall paper
Then it is working! This is how it works:
Your built-in screen and you external screen are each show at sizes proportional to their pixel count. If this is not the correct arrangement, then drag the screens so that they correspond with their placement on your bench.
Then move the mouse off the edge of one screen, and it appears on the other. Next drag a window across to the other screen.

My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it?????

My iphone 5s wont turn on. I tried to recover it through itunes and it didnt work. It said that due to an error my phone could not be restored. However when I plug it into itunes via my computer it turns on, I get the apple, the white line beneath it???? As soon as I remove it from the computer it goes completly off again???????

Hey beaches37,
Thanks for the question. I understand you are experiencing issues with your iPhone 5s. You mentioned you received an error when attempting to restore. If you remember this error, the following article may help to resolve it:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Furthermore, you may want to try restoring your iPhone in recovery-mode:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!

Ever since the up dates... Any of my photos that I use and want to set as wall paper... The software blows the picture out of portion and no way of cropping it and keeping it at the regular size!!!! How can this be fixed!!???

Hope this helps:
http://ios.wonderhowto.com/how-to/fixing-ios-7-wallpaper-woes-scale-crop-align-d esign-perfect-iphone-background-0148750/
Please reply with any further questions.

The wall paper can't change, all the time it's the same

I have a Mac with Mountain Lion OS X 10.8.4. I have a problem with the wall paper, if I change the wallpaper, when the system restarts reappears the same all the time.
I can tried to delete the file com.apple.desktop.plist but the problem persist.

Triple click and copy paste each line below one at a time into Terminal and press enter after each line, some might say "doesn't exist" don't worry.
Do not type the entries, you might make a fatal typo. rm is very dangerous. Have a backup of your files off the machine.
rmdir Library/Caches/com.apple.systempreferences
rm Library/Caches/com.apple.systempreferences
rm Library/Preferences/com.apple.desktop.plist
Then Apple menu > Restart, open System Preferences and set your preferences.
If you still having problems, try other wallpapers from Apple only and test,
Then also run through this list of fixes and tests, there is something further wrong with your machines software.
..Step by Step to fix your Mac
Make sure to backup
Most commonly used backup methods

Error "-602" occurred in the current database connection "R/3*".

Hi All,
I am working with Preview 2004s ABAP Trial version ,when load data from PSA to Info cube with help of DTP , getting following error.
Runtime Errors DBIF_DSQL2_SQL_ERROR
Except. CX_SY_NATIVE_SQL_ERROR
Date and Time 20.07.2008 16:04:52
Short text
An SQL error occurred when executing Native SQL.
What happened?
The error "-602" occurred in the current database connection "R/3*".
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
How to correct the error
Database error text........: "POS(1) System error: BD Index not accessible"
Database error code........: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/SZD_PROD" ( "/BIC/ZD_PROD",
"SID", "CHCKFL", "DATAFL", "INCFL" ) VALUES ( ? , ? , ? , ? , ? )"
Internal call code.........: "DBDS/NEW DSQL"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
please help me in this
Kind regards.
Hari

Hi All,
Problem resloved.
hari

Error 602 on the white wall paper

Similar Messages

Maybe you are looking for