Error 610 Database location policy is not configured.

Hello,
I'm running ZENworks 6.5 sp1(a).**I*have*an*Inventory*Service*object **called
"Inventory Service_servername".**Should*I*be*renaming*t his*to*the*older
configuration (which I don't have anymore) or try to configure it as is.
startinv no longer will start inventory.**I*had*this*working*since*the
upgrade (a long time ago) but it's no longer working.**I*had*checked*a
number of the TID's on this error but I have not been able to resolve the
problem.**Please*tell*me*where*I*should*be gin*to*look.
Thanks in advance, Oksana

It's now fixed. Looks like it was configured both in the Server Package and
the Service Location Policy, so I removed the settings from the Server
Package, and voila it works!
Oksana wrote:
> With debugging increased:
>
> 12/9/05 12:55:55.537] ZENInv - Server Config: getAttributes of DB Loc.
> Policy returned: 104
> [12/9/05 12:55:55.537] ZENInv - Server Config: DB Location Policy not
> configured properly...
> [12/9/05 12:55:55.537] ZENInv - Server Config: The
> getConfigurationFromDirectory() returned610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Inv Server not configured
> properly. Error code: 610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Error Type 15 Error 610
>
> and later on
>
> [12/9/05 12:55:55.927] ZENInv - Status Reporting: Number of modified
> [records
> are: 0 for DN=CN=Inventory Service_BOREALIS.OU=ARDELT.O=FACS
> [12/9/05 12:55:55.927] ZENInv - Server Config: Error Type 15 Error 610
> [12/9/05 12:55:55.927] ZENInv - Server Config: clearScope() return value 1
>
>
> The db location is specified, so I'm not sure what the problem is, maybe
> the
> correct rights to acces the db aren't in place. Everything else seems to
> be working.
>
> TIA, Oksana
>
> Marcus Breiden wrote:
>
>> On Fri, 02 Dec 2005 16:30:27 GMT, Oksana wrote:
>>
>>> We installed sp1 before sp1a came out and I fixed it and it has been
>>> working
>>> since. However, recently it is not working and I'm not sure why.
>>
>> in that case I would enable debug logging for inventory and take a look
>> at the log file..
>>
>> Try enable debugging....
>>
>> http://www.novell.com/documentation/...rts/zdprts.pdf

Similar Messages

610 Database Location Policy Not Configured

I'm getting this error starting the inventory service. Policies are
configured as is search policies. What else am I'm missing to get this up
and running?

Jpaluch,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". Please help!!!

I have an Apple Configurator install that wont recognize an iPad when I attach it via USB. I cant prepare it or refresh it. It was supervised. I get an error message that says "policy does not have correct profile data". At some point there was a mismatch between the profile on the iPad and the MAC server. The profile on the MAC server has been deleted and the iPad has been erased and reset to default. I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it. Please help!!

Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
Hit the return key.
If you get no error message, it worked, and you can quit the app.

Error--Instance DVEBMGS00 for system SID not configured

i am changing the instance profile in Basic Mainenance.
When i increase teh Dialog instance and click on copy, i am getting the message
Instance DVEBMGS00 for system <SID> not configured
But this system is running for the past one year.
Please let me know what i can do in this regard

Hello Balaji,
Your question is not very clear. Could not understand what you mean by "When i increase teh Dialog instance and click on copy,". Please explain all the steps you are taking.
Regards.
Ruchit.

610 error... Database location Policy not found

I realize that this item is not new to this forum and I have tried all the solutions from here and in any TID's I could find. The configuration looks correct. The only thing I can identify is that it stopped working at the same time that I updated the NW6 server with edir873 and jvm141. I have since then applied the patch to edir and jvm142sp3. Is there a resolution that anyone knows of.

Walter,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com in both the "free product support" and "paid product support"
drop down boxes.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

610 Database Not Configured Error?

Hello,
We have had Zen 7 installed for quite a while and now are looking to get
some information from the inventory. Of course, now that we are wanting to
use it we have noticed that it hasn't ever been working completely as we
are getting the "610: The Database Location policy is not configured."
error. I have checked and double-checked the Service Location Policy and
the Server Package. Both have the Zenworks Inventory database configured
to the inventory database object for the server.
What else should I be checking?
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/

Tim Musa <musat_@_ccsd93.com> wrote in
news:[email protected]:
> Hello,
>
> We have had Zen 7 installed for quite a while and now are looking to
> get some information from the inventory. Of course, now that we are
> wanting to use it we have noticed that it hasn't ever been working
> completely as we are getting the "610: The Database Location policy is
> not configured." error. I have checked and double-checked the Service
> Location Policy and the Server Package. Both have the Zenworks
> Inventory database configured to the inventory database object for the
> server.
>
> What else should I be checking?
>
Well, after poking around a bit more, I cleared the associations for the
policy and the package and re-associated them and the inventory server has
started.
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/

Error when opening OEM: Cluster Database : OraDB.SP2-0640: Not connected

I have successfully installed 2 nodes Oracle cluster.
1. The dbconsole is started in both nodes.
I checked this with HM/bin>emctl status dbconsole
2. The agent is also started successfully in both nodes.
I checked this with HM/bin>emctl status agent
The problem is that my enterprise manager is started with error; Cluster Database : v3uat.SP2-0640: Not connected
My database is up and running because I can connect using sqlplus and toad.
Did anyone know what the problem might be?
Any help would be greatly appreciated.
AsoRock

check emoms.trc

The database DLL 'crdb_oracle' could not be loaded.

I have built a .net 2.0 website that is using Crystal Report Viewer with an Oracle 10g Database. All works well on my local machine but when deployed to the web server I get the following error:
Failed to load database information. Details: The database DLL 'crdb_oracle.dll' could not be loaded. Error in File C:\DOCUME1\DMTEST\ASPNET\LOCALS1\Temp\test {BB80E9A1-92CE-402D-A52A-47ECE4330794}.rpt: Failed to load database information.
I have run the Crystal Reports for .Net Framework 2.0 setup and have located the 'crdb_oracle.dll' file in the C:\Program Files\Common Files\Business Objects\2.7\Bin directory. Am I missing a step in this process.
The Web Server is a Windows 2000 box.
Thank,
John

I am having a similar problem. However, I do not have CR installed, but want to use only CR from within VS 2008 and deploy a ASP.NET reporting app to IIS. If I create a simple report with no parameters it will run fine in both VS and IIS. However, if I add a parameter to the report such as UserId={?Parameter1} then on execution, the report will prompt for the parameter and then throw this error, "The database DLL 'crdb_oracle' could not be loaded."
I have added full privileges to the ASP.NET, IUSR, and IWAM for the Oracle folder. I also search the hard drive and find only one OSI.dll and no crdb_oracle.dll.
Can you tell me if my scenario is supported with VS 2008 only?
I am connecting to the DB like this:
            ConnectionInfo connectionInfo = new ConnectionInfo();
            connectionInfo.ServerName = "Driver={Microsoft ODBC for ORACLE};Server=localhost;Port=1521;";
            connectionInfo.DatabaseName = "dev";
            connectionInfo.UserID = "...";
            connectionInfo.Password = "...";
            TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
            foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
                tableLogOnInfo.ConnectionInfo = connectionInfo;
Thank you,
Travis

RTC-5230 - Location DEV_LOC has not been registered by the current user

All,
We have recently migrated our dev environment to new hardware and I need to change the OWB Location details to reflect this - I am now attempting to unregister the locations in the Control Center but am getting the following error:
RTC-5230: Location DEV_LOC has not been registered by the current user
Is there a view I can use to find out which user registered the Location?

Look at this thread (steps for unregsitering location)
Re: Unable to connect control center and start runtime service
Regards,
Oleg
PS. Before using unregister_location.sql script unregister this location in Warehouse Builder Browser (Locations Report section).
This prevent from displaying error "Location ... is registered in this repository" during execution this script

Guest variable 'guest info.return_code' not configured correctly.

Hi,
I'm converting a SQL Server 2012 from Base DBVM to Base DB Template. After a while working on the conversion I get this error:
"Guest variable 'guest info.return_code' not configured correctly."
If I double-click the error I get the following message: "Cannot get detail information for the specified resource bundle."
I'd really appreciate if anyone can help with the issue.
Regards
Fernando

carlasummers wrote:
...Error: variable hourlyRate might not have been inialized and variable hoursWorked might not have been inialized. ....Haven't read your code, but whenever I see an error like this, I find that usually correcting what it tells me to correct helps: initialize the variables.
i.e.,:
    double hoursWorked = 0.0;
    double hourlyRate = 0.0;
    double weeklyPay = 0.0;also: never use float when you can use double (there are exceptions but they are few).
also: You need to get the employee name within the loop. Also it would help to add the prompt: "enter \"stop\" to quit" or something of that nature. Assume that the users of your program are idiots.
Also, when posting code here, please use code tags so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
[code]
// your code goes here
// notice how the top and bottom tags are different
[/code]Best of luck.
Edited by: Encephalopathic on Apr 25, 2009 6:56 AM

MDT deployment "windows could not configure one or more system components"

Hi,
I have successfully deployed a standard Windows 7 image using a combination of WDS and MDT.
Now I want to patch the image with the latest security updates and hotfixes. Using DISM command line I mounted the image, added 125 packages and unmounted the image. Then I put this custom image into MDT and deployed using the same task sequence as the standard
image above.
The deployment nearly finished and the computer reboots. I then get a screen showing an animated progress bar and 'Setup is applying system settings'. Then a pop-up error...
"Windows could not configure one or more system components. To install Windows, restart the computer and then restart the installation".
I have tried with and without injecting drivers into the task sequence (just to rule that out).
Can anyone suggest what the problem might be? A standard image deploys fine. The same image with patches applied fails.
Thanks
Mike.

Hi,
I currently encounter the same issue. I found this link: http://iboyd.net/index.php/2013/01/04/applying-kb2506143-to-an-offline-windows-7-sp1-wim-windows-setup-fail/
At the moment I'm rebuilding my install.wim without the mentioned update, so I'm not able to tell if this resolves my issue, but good chance it will.
If you haven't figured it out yourself at this time, most likely an update will cause these troubles.
Hope this helps...
Regards,
Hugo

Error message when Database details are not configured properly

Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
Praveen

Praveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun

Managed folder policy will not apply to entire database

Exch2007 sp3
I have run several versions of this pshell command trying to set a MRM policy for a specific Exch2007 database, but the policy is not getting applied…..the mailboxes don’t show the policy
Get-Mailbox -domaincontroller DC.domain.com | Where{$_.Database -eq "mail\sg1\private information store"} | Set-Mailbox -ManagedFolderMailboxPolicy "90day"
When I run this version, it returns info about a corrupted mailbox.
If this mailbox is what is stopping the cmd from completing, is there a parameter to skip bad mailboxes?
Thanks!

Hi,
What's the error/warning of that corrupted mailbox? Since it’s a corrupted mailbox, I suggest to disable this mailbox then run command to apply managed folder mailbox policy.
In addition, just set the policy on DB isn’t enough to see the effects in user’s Outlook. To do this we need to schedule the managed folder assistant to run on a mailbox server
For EMC:
“Server Configuration”->”Mailbox”->locate related mailbox role and right-click it->choose “Properties”
In the “Messaging Records Management” tab->set the running schedule
For EMS:
Start-ManagedFolderAssistant
https://technet.microsoft.com/en-us/library/bb691428%28EXCHG.80%29.aspx?f=255&MSPPError=-2147217396
Document for reference
Managing Messaging Records Management
https://technet.microsoft.com/en-us/library/bb123507(EXCHG.80).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Show Database Get "Object was not found"error

Hi there,
I have a weird situation here.
I created Data Guard Broker setup and show configuration return good result.
It is running for quite a while, and I can see if I switch log file on Primary, the Max Seq# is matched between Primary and Standby. Also do a lot of other test query all return good result.
But today when I happen to run Show Database command it says the DB object not found,
and there is no error in DRCxxx.log file.
Did I miss something? Any suggestions are appreciated.
===============Script===================
--Standby
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2R
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2R
--Primary
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2
-- primary
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2/dg1XXXPRD2.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2/dg2XXXPRD2.dat' scope=both;
-- standby
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2R/dg1XXXPRD2R.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2R/dg2XXXPRD2R.dat' scope=both;
-- primary
alter system set dg_broker_start=true scope=both;
-- standby
alter system set dg_broker_start=true scope=both;
-- primary
dgmgrl /
create configuration 'dg_XXXPRD2' as primary database is 'XXXPRD2' connect identifier is 'XXXPRD2';
add database 'XXXPRD2R' as connect identifier is 'XXXPRD2R' maintained as physical;
enable configuration;
===============Script===================
DGMGRL> show configuration
Configuration - dg_XXXPRD2
Protection Mode: MaxAvailability
Databases:
XXXPRD2 - Primary database
XXXPRD2R - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> SHOW DATABASE XXXPRD2
Object "XXXPRD2" was not found
DGMGRL> show database XXXPRD2R
Object "XXXPRD2R" was not found
-----------------------------------------------

Hello;
What I have noticed is sometimes single quotes count and sometime they don't.
Try :
SHOW DATABASE 'XXXPRD2';
Test
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show database standby
Object "standby" was not found
DGMGRL> show database 'standby';
Object "standby" was not found
DGMGRL> show database 'STANDBY';
Database - STANDBY
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   (unknown)
Apply Lag:
Real Time Query: OFF
Instance(s):
    STANDBYSo getting the case matters too.
DGMGRL> SHOW DATABASE STANDBY;
Object "standby" was not found
DGMGRL> Best Regards
mseberg
Edited by: mseberg on Jan 18, 2013 2:21 PM

Dependency is not configured in the schema resource Error (OSB)

Hi all,
I am using OSB(10gR3). I am using workshop IDE. I have copied few Xsds into a project. One schema which has an import throws an error
"dependency is not configured in the schema resource Error .Possible reason one or more import/include not set correctly."
Kindly help me in solving this error.
I am new to OSB,kindly share any good online resources I would be of great help for me.

"Edit References" button will appear on sbconsole. Upload it on sbconsole and you will be able to see the button.
If you open the XSD in the workshop (in design view), under "Directives" you will be able to see the imports. Click on any of them and in the "properties" tab below you would be able to see "Schema Location" (in General tab of properties). Click on browse button and it will ask whether you want to download it from a HTTP URL or want to refer from a existing workbench projects.
Regards,
Anuj

Error 610 Database location policy is not configured.

Similar Messages

Maybe you are looking for