Error -64997 during generation intermediate file .
I have face this error Error -64997 during generation intermediate file. I am using Spartan 3E starter kit. Plz tell me what I am do?
Solved!
Go to Solution.
Attachments:
Untitled.jpg 151 KB
Untitledd.jpg 79 KB
You can find the downloads for LabVIEW 2011 SP1 and LabVIEW FPGA Module 2011 SP1 at www.ni.com/donwloads
Then sort by Software » LabVIEW (for the development environement) and Software » LabVIEW Add Ons (for the FPGA module). Or you can search for any product you desire. If your serial number is not valid for these products then you will only have access to the software for a short trial period. I would recommend checking with the adminstrator of your software license to see which versions you have access to.
Knowledge Base Article titled "Where Can I Find the LabVIEW FPGA for Xilinx SPARTAN-3E XUP Driver?" has links at the bottom of the page which will take you to all the downloads we have available for the FPGA driver for Spartan 3E.
-Nick-
Nick C | Staff LabVIEW Platform Product Support Engineer | National Instruments
Similar Messages
-
Initial error occurred during generation of the transformation
HI experts
here i am loading master dat using 7 that ds is in 3.x when i do rt click on the ds it
is asking for the transfer rules to be installed and after that rt click create transformations then "Initial error occurred during generation of the transformation rstran 667" his error is coming
can anybody help me in this
regards
anandHi Anand
May be you have not maintained the infosource.
Create one infosource by using data source in transformation.
Better you migrate to 7.0 data source and try to use.
Update me, still if you had any problems
Regards
Saravanan.ar -
I cannt download lion an error happend during installation..file corrupt
i cannt download lion an error happend during installation..file corrupt
Make sure there's enough free space on the startup disk to install updates.
Right or control click the MacintoshHD icon on your desktop then click Get Info.
Look for Capacity and Available in the Get Info panel.
Make sure there's at least 15% available disk space.
And make sure you are logged into the admin account when running Software Update.
If there's enough free storage space and you are logged in as the admin, could be corrupted preferences.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: /Library/Preferences
Click Go then move the com.apple.SoftwareUpdate.plist file from the Preferences folder to the Trash. Empty the Trash.
Then click your Apple menu > Software Update -
Error encountered during generation of default Crystal Report Layout
Hi Experts,
I am currently encountering an error on a particular workstation during generation of a default crystal report layout. Is there any SAP note for this or did someone encountered this error already?
Details:
SAP B1 8.81 PL:06 (I think its not a patch issue since the error is occurring on a particular workstation)
Windows OS: Windows 7
Actions Taken:
Run CRRedist2005_x86
Run CRNET11WIN_EN_200403
Run crnet11win_en_sp1
Run crnet11win_en_sp2
Regards,
ZeusHi,
Check SAP note regardless of version and PL.
1529682 - Crystal report not displayed in Windows 7 OS
1668274 - Print Draft with Crystal Layout
Thanks & Regards,
Nagarajan -
Error occuring during importing .par file
Hi all,
I m trying to customise the logon screen for my project. For this I have downloaded the "com.sap.portal.runtime.logon.par.bak" from System administration>Support->Portal Runtime->Browse Deployement. I have locally saved this file on C:\temporary. I have renamed the file as .par and removed the .bak extension. Now I have tried to import the file onto NWDS in EP perspective by following File>Import-->Par file. But its giving me this error:
error in opening zip file
Reason: Sorry, an error occured creating the new project.
The plugin "com.sap.portal.plugins.config-archiver caused an exception during the
"Unpack" Operation See log for more details.
However, in my package explorer in NWDS I can see a project created and with the structure. But in Portal-INF I cant see seven jsp files and four text files which comprises of basic functionality of the Logon Page.
Can anyone suggest me a solution to this?
Regards,
Priyanka.Hi,
After renaming com.sap.portal.runtime.logon.par.bak to com.sap.portal.runtime.logon.par. Try opening the file with winrar/winzip to see if you have a right par file structure. On some portal versions, when you open com.sap.portal.runtime.logon.par file, you have again a com.sap.portal.runtime.logon.par file inside it.
So if you find com.sap.portal.runtime.logon.par file inside com.sap.portal.runtime.logon.par. Then just extract it again and try importing it into NWDS.
Greetings,
Praveen Gudapati
[Points are always welcome for helpful answers] -
Capturing the details of data in which error occured during uploading
Hi, anyone tell me how to Capturing the details of data in which error occured during uploading the file using BDC in backgroung mode. Please do the needful
Thanks & Regards.
Aniruddhahi,
This declaration is used to capture the error msg. V is the std table that captures that.i have given a sample code with this..pls chk it out..
data: err type standard table of bdcmsgcoll with header line.
SAmple code:
report z_aru_bdc_new4
no standard page heading line-size 255.
include bdcrecx1.
Generated data section with specific formatting - DO NOT CHANGE ***
parameters: p_file like rlgrap-filename obligatory.
data: err type standard table of bdcmsgcoll with header line.
data: mess(200) type c.
data: begin of it_err occurs 0,
msg(200) type c,
end of it_err.
data: begin of record occurs 0,
data element:
viewname_001(030),
data element: VIM_LTD_NO
ltd_dta_no_002(001),
data element: ZEMPID3
zempid3_003(004),
data element: ZENAME3
zename3_008(040),
data element: ZEDEPID
zedepid_009(004),
data element:
zsalkey_010(005),
data element:
salary_011(013),
data element: ZENAME3
ZENAME3_008(040),
data element: ZEDEPID
ZEDEPID_009(004),
data element:
ZSALKEY_010(005),
data element:
SALARY_011(013),
end of record.
End generated data section ***
start-of-selection.
at selection-screen on value-request for p_file.
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
DEF_PATH = ' '
mask = '.,..'
mode = 'O' " O -- open, S -- Save.
title = 'OPEN'
importing
filename = p_file
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
start-of-selection.
call function 'UPLOAD'
exporting
CODEPAGE = ' '
filename = p_file
filetype = 'DAT'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
tables
data_tab = record
exceptions
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
others = 7
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*perform open_dataset using dataset.
*perform open_group.
delete record index 1.
loop at record.
*read dataset dataset into record.
*if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_field using 'BDC_OKCODE'
'=UPD'.
perform bdc_field using 'VIEWNAME'
record-viewname_001.
perform bdc_field using 'VIMDYNFLDS-LTD_DTA_NO'
record-ltd_dta_no_002.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=NEWL'.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-SALARY'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'ZEMPTAB1-ZEMPID3'
record-zempid3_003.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0002'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZENAME3'.
perform bdc_field using 'BDC_OKCODE'
'=UEBE'.
perform bdc_field using 'ZEMPTAB1-ZENAME3'
record-zename3_008.
perform bdc_field using 'ZEMPTAB1-ZEDEPID'
record-zedepid_009.
perform bdc_field using 'ZEMPTAB1-ZSALKEY'
record-zsalkey_010.
perform bdc_field using 'ZEMPTAB1-SALARY'
record-salary_011.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_dynpro using 'SAPLZSHAP' '0001'.
perform bdc_field using 'BDC_CURSOR'
'ZEMPTAB1-ZEMPID3(01)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_dynpro using 'SAPMSVMA' '0100'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VIEWNAME'.
perform bdc_transaction using 'SM30'.
*enddo.
*perform close_group.
*perform close_dataset using dataset.
endloop.
loop at it_err.
write : / it_err-msg.
endloop.
form error.
call function 'FORMAT_MESSAGE'
exporting
id = sy-msgid
lang = '-D'
no = sy-msgno
v1 = sy-msgv1
v2 = sy-msgv2
v3 = sy-msgv3
v4 = sy-msgv4
importing
msg = mess
exceptions
not_found = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
it_err-msg = mess.
append it_err.
clear it_err.
endform.
If it is session method u can find the session in SM35 from where u can get the error log.
Hope this helps u,
Regards,
Arunsri -
When I create an EJB Transport Business Service, after selecting the jar that has the EJB 2.1 artefacts (Remote, Home, etc) the oepe plugin fails and can't continue.
As I understand it seems that there is a problem with the classpath of ant build.xml that oepe creates inside folder /tmp/alsbejbtransport/ to compile the bs and generate the wsdl. I checked if tools.jar is in the classpath (in eclipse) and is included, so I can't figure out wich is the problem.
I found this in Oracle, but not helps solve the problem:
BEA-398120
Error: The WSDL for the typed transport endpoint could not be accessed.
Description
There was a problem retrieving the WSDL from the typed transport service endpoint at the time of service registration
Action
Contact technical support
This is the the full stacktrace that shows eclipse.
Generate : Error during generation of the WSDL:
BUILD FAILED
java.lang.NoClassDefFoundError: com/sun/javadoc/Type
at com.bea.util.jam.provider.JamServiceFactoryImpl.createSourceBuilder(JamServiceFactoryImpl.java:205)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createBuilder(JamServiceFactoryImpl.java:158)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createClassLoader(JamServiceFactoryImpl.java:137)
at com.bea.util.jam.provider.JamServiceFactoryImpl.createService(JamServiceFactoryImpl.java:78)
at weblogic.wsee.util.JamUtil.parseSource(JamUtil.java:152)
at weblogic.wsee.tools.anttasks.JwsLoader.loadJClasses(JwsLoader.java:186)
at weblogic.wsee.tools.anttasks.JwsLoader.load(JwsLoader.java:75)
at weblogic.wsee.tools.anttasks.JwsModule.loadWebServices(JwsModule.java:569)
at weblogic.wsee.tools.anttasks.JwsModule.generate(JwsModule.java:369)
at weblogic.wsee.tools.anttasks.JwsModule.build(JwsModule.java:256)
at weblogic.wsee.tools.anttasks.JwscTask.execute(JwscTask.java:184)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Caused by: java.lang.ClassNotFoundException: com.sun.javadoc.Type
at org.apache.tools.ant.AntClassLoader.findClassInComponents(AntClassLoader.java:1400)
at org.apache.tools.ant.AntClassLoader.findClass(AntClassLoader.java:1341)
at org.apache.tools.ant.AntClassLoader.loadClass(AntClassLoader.java:1088)
at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
... 27 more
Total time: 0 seconds
Eclipse Installation details:
*** System properties:
eclipse.application=org.eclipse.ui.ide.workbench
eclipse.buildId=M20110909-1335
eclipse.commands=-os
linux
-ws
gtk
-arch
x86_64
-showsplash
-launcher
{home}/Development/oepe-indigo/eclipse
-name
Eclipse
--launcher.library
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so
-startup
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
--launcher.overrideVmargs
-exitdata
1e418010
-vm
/usr/bin/java
eclipse.home.location=file:{home}/Development/oepe-indigo/
eclipse.launcher={home}/Development/oepe-indigo/eclipse
eclipse.launcher.name=Eclipse
[email protected]/../p2/
eclipse.p2.profile=PlatformProfile
eclipse.product=org.eclipse.platform.ide
eclipse.startTime=1374623921455
eclipse.vm=/usr/bin/java
eclipse.vmargs=-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3
-Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
-Dosb.home={home}/Oracle/Middleware/Oracle_OSB1
-Dosgi.bundlefile.limit=750
-Dosgi.nl=en_US
-Dmiddleware.home={home}/Oracle/Middleware
-jar
{home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
equinox.use.ds=true
file.encoding=UTF-8
file.encoding.pkg=sun.io
file.separator=/
guice.disable.misplaced.annotation.check=true
harvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester
http.nonProxyHosts=localhost
java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment
java.awt.printerjob=sun.print.PSPrinterJob
java.class.path={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
java.class.version=50.0
java.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/endorsed
java.ext.dirs=/usr/lib/jvm/jdk1.6.0_45/jre/lib/ext:/usr/java/packages/lib/ext
java.home=/usr/lib/jvm/jdk1.6.0_45/jre
java.io.tmpdir=/tmp
java.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64/server:/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64:/usr/lib/jvm/jdk1.6.0_45/jre/../lib/amd64:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib
java.protocol.handler.pkgs=null|com.bea.wli.sb.resources.url|com.bea.wli.sb.resources.jca.upgrade.url|weblogic.utils|weblogic.utils|weblogic.utils|weblogic.net|weblogic.net
java.runtime.name=Java(TM) SE Runtime Environment
java.runtime.version=1.6.0_45-b06
java.specification.name=Java Platform API Specification
java.specification.vendor=Sun Microsystems Inc.
java.specification.version=1.6
java.vendor=Sun Microsystems Inc.
java.vendor.url=http://java.sun.com/
java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi
java.version=1.6.0_45
java.vm.info=mixed mode
java.vm.name=Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name=Java Virtual Machine Specification
java.vm.specification.vendor=Sun Microsystems Inc.
java.vm.specification.version=1.0
java.vm.vendor=Sun Microsystems Inc.
java.vm.version=20.45-b01
javax.rmi.CORBA.PortableRemoteObjectClass=weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass=weblogic.iiop.UtilDelegateImpl
jna.platform.library.path=/usr/lib/x86_64-linux-gnu:/lib/x86_64-linux-gnu:/lib64:/usr/lib:/lib
line.separator=
middleware.home={home}/Oracle/Middleware
oracle.eclipse.tools.weblogic.ui.isWebLogicServer=true
org.apache.commons.logging.Log=org.apache.commons.logging.impl.NoOpLog
org.eclipse.equinox.launcher.splash.location={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
org.eclipse.equinox.simpleconfigurator.configUrl=file:org.eclipse.equinox.simpleconfigurator/bundles.info
org.eclipse.m2e.log.dir={home}/workspace/pragma/.metadata/.plugins/org.eclipse.m2e.logback.configuration
org.eclipse.update.reconcile=false
org.omg.CORBA.ORBClass=weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass=weblogic.corba.orb.ORB
org.osgi.framework.executionenvironment=OSGi/Minimum-1.0,OSGi/Minimum-1.1,OSGi/Minimum-1.2,JRE-1.1,J2SE-1.2,J2SE-1.3,J2SE-1.4,J2SE-1.5,JavaSE-1.6
org.osgi.framework.language=en
org.osgi.framework.os.name=Linux
org.osgi.framework.os.version=3.8.0
org.osgi.framework.processor=x86-64
org.osgi.framework.system.capabilities=osgi.ee; osgi.ee="OSGi/Minimum"; version:List<Version>="1.0, 1.1, 1.2",osgi.ee; osgi.ee="JavaSE"; version:List<Version>="1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6"
org.osgi.framework.system.packages=javax.accessibility,javax.activation,javax.activity,javax.annotation,javax.annotation.processing,javax.crypto,javax.crypto.interfaces,javax.crypto.spec,javax.imageio,javax.imageio.event,javax.imageio.metadata,javax.imageio.plugins.bmp,javax.imageio.plugins.jpeg,javax.imageio.spi,javax.imageio.stream,javax.jws,javax.jws.soap,javax.lang.model,javax.lang.model.element,javax.lang.model.type,javax.lang.model.util,javax.management,javax.management.loading,javax.management.modelmbean,javax.management.monitor,javax.management.openmbean,javax.management.relation,javax.management.remote,javax.management.remote.rmi,javax.management.timer,javax.naming,javax.naming.directory,javax.naming.event,javax.naming.ldap,javax.naming.spi,javax.net,javax.net.ssl,javax.print,javax.print.attribute,javax.print.attribute.standard,javax.print.event,javax.rmi,javax.rmi.CORBA,javax.rmi.ssl,javax.script,javax.security.auth,javax.security.auth.callback,javax.security.auth.kerberos,javax.security.auth.login,javax.security.auth.spi,javax.security.auth.x500,javax.security.cert,javax.security.sasl,javax.sound.midi,javax.sound.midi.spi,javax.sound.sampled,javax.sound.sampled.spi,javax.sql,javax.sql.rowset,javax.sql.rowset.serial,javax.sql.rowset.spi,javax.swing,javax.swing.border,javax.swing.colorchooser,javax.swing.event,javax.swing.filechooser,javax.swing.plaf,javax.swing.plaf.basic,javax.swing.plaf.metal,javax.swing.plaf.multi,javax.swing.plaf.synth,javax.swing.table,javax.swing.text,javax.swing.text.html,javax.swing.text.html.parser,javax.swing.text.rtf,javax.swing.tree,javax.swing.undo,javax.tools,javax.transaction,javax.transaction.xa,javax.xml,javax.xml.bind,javax.xml.bind.annotation,javax.xml.bind.annotation.adapters,javax.xml.bind.attachment,javax.xml.bind.helpers,javax.xml.bind.util,javax.xml.crypto,javax.xml.crypto.dom,javax.xml.crypto.dsig,javax.xml.crypto.dsig.dom,javax.xml.crypto.dsig.keyinfo,javax.xml.crypto.dsig.spec,javax.xml.datatype,javax.xml.namespace,javax.xml.parsers,javax.xml.soap,javax.xml.stream,javax.xml.stream.events,javax.xml.stream.util,javax.xml.transform,javax.xml.transform.dom,javax.xml.transform.sax,javax.xml.transform.stax,javax.xml.transform.stream,javax.xml.validation,javax.xml.ws,javax.xml.ws.handler,javax.xml.ws.handler.soap,javax.xml.ws.http,javax.xml.ws.soap,javax.xml.ws.spi,javax.xml.ws.wsaddressing,javax.xml.xpath,org.ietf.jgss,org.omg.CORBA,org.omg.CORBA_2_3,org.omg.CORBA_2_3.portable,org.omg.CORBA.DynAnyPackage,org.omg.CORBA.ORBPackage,org.omg.CORBA.portable,org.omg.CORBA.TypeCodePackage,org.omg.CosNaming,org.omg.CosNaming.NamingContextExtPackage,org.omg.CosNaming.NamingContextPackage,org.omg.Dynamic,org.omg.DynamicAny,org.omg.DynamicAny.DynAnyFactoryPackage,org.omg.DynamicAny.DynAnyPackage,org.omg.IOP,org.omg.IOP.CodecFactoryPackage,org.omg.IOP.CodecPackage,org.omg.Messaging,org.omg.PortableInterceptor,org.omg.PortableInterceptor.ORBInitInfoPackage,org.omg.PortableServer,org.omg.PortableServer.CurrentPackage,org.omg.PortableServer.POAManagerPackage,org.omg.PortableServer.POAPackage,org.omg.PortableServer.portable,org.omg.PortableServer.ServantLocatorPackage,org.omg.SendingContext,org.omg.stub.java.rmi,org.w3c.dom,org.w3c.dom.bootstrap,org.w3c.dom.css,org.w3c.dom.events,org.w3c.dom.html,org.w3c.dom.ls,org.w3c.dom.ranges,org.w3c.dom.stylesheets,org.w3c.dom.traversal,org.w3c.dom.views,org.w3c.dom.xpath,org.xml.sax,org.xml.sax.ext,org.xml.sax.helpers
org.osgi.framework.uuid=901615cd-f3f3-0012-11b6-a3bca4d97ac1
org.osgi.framework.vendor=Eclipse
org.osgi.framework.version=1.6.0
org.osgi.supports.framework.extension=true
org.osgi.supports.framework.fragment=true
org.osgi.supports.framework.requirebundle=true
os.arch=amd64
os.name=Linux
os.version=3.8.0-26-generic
osb.home={home}/Oracle/Middleware/Oracle_OSB1
osgi.arch=x86_64
osgi.bundlefile.limit=750
osgi.bundles=reference:file:javax.transaction_1.1.1.v201105210645.jar,reference:file:org.eclipse.equinox.simpleconfigurator_1.0.200.v20110502-1955.jar@1:start
osgi.bundles.defaultStartLevel=4
osgi.bundlestore={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/bundles
osgi.configuration.area=file:{home}/Development/oepe-indigo/configuration/
osgi.framework=file:{home}/Development/oepe-indigo/plugins/org.eclipse.osgi_3.7.1.R37x_v20110808-1106.jar
osgi.framework.extensions=reference:file:javax.transaction_1.1.1.v201105210645.jar
osgi.framework.shape=jar
osgi.framework.version=3.7.1.R37x_v20110808-1106
osgi.frameworkClassPath=., file:{home}/Development/oepe-indigo/plugins/javax.transaction_1.1.1.v201105210645.jar
osgi.install.area=file:{home}/Development/oepe-indigo/
osgi.instance.area=file:{home}/workspace/pragma/
osgi.instance.area.default=file:{home}/workspace/
osgi.logfile={home}/workspace/pragma/.metadata/.log
osgi.manifest.cache={home}/Development/oepe-indigo/configuration/org.eclipse.osgi/manifests
osgi.nl=en_US
osgi.nl.user=en_US
osgi.os=linux
osgi.splashLocation={home}/Development/oepe-indigo/plugins/org.eclipse.platform_3.7.1.v201109091335/splash.bmp
osgi.splashPath=platform:/base/plugins/org.eclipse.platform
osgi.syspath={home}/Development/oepe-indigo/plugins
osgi.tracefile={home}/workspace/pragma/.metadata/trace.log
osgi.ws=gtk
path.separator=:
securerandom.source=file:/dev/./urandom
socksNonProxyHost=localhost
sun.arch.data.model=64
sun.boot.class.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/resources.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/rt.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/sunrsasign.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jsse.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/jce.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/charsets.jar:/usr/lib/jvm/jdk1.6.0_45/jre/lib/modules/jdk.boot.jar:/usr/lib/jvm/jdk1.6.0_45/jre/classes
sun.boot.library.path=/usr/lib/jvm/jdk1.6.0_45/jre/lib/amd64
sun.cpu.endian=little
sun.cpu.isalist=
sun.desktop=gnome
sun.io.unicode.encoding=UnicodeLittle
sun.java.command={home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar -os linux -ws gtk -arch x86_64 -showsplash -launcher {home}/Development/oepe-indigo/eclipse -name Eclipse --launcher.library {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.100.v20110505/eclipse_1407.so -startup {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.overrideVmargs -exitdata 1e418010 -vm /usr/bin/java -vmargs -Xms256m -Xmx768m -XX:MaxPermSize=512m -Dsun.lang.ClassLoader.allowArraySyntax=true -Dweblogic.home={home}/Oracle/Middleware/wlserver_10.3 -Dharvester.home={home}/Oracle/Middleware/Oracle_OSB1/harvester -Dosb.home={home}/Oracle/Middleware/Oracle_OSB1 -Dosgi.bundlefile.limit=750 -Dosgi.nl=en_US -Dmiddleware.home={home}/Oracle/Middleware -jar {home}/Development/oepe-indigo//plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar
sun.java.launcher=SUN_STANDARD
sun.jnu.encoding=UTF-8
sun.lang.ClassLoader.allowArraySyntax=true
sun.management.compiler=HotSpot 64-Bit Tiered Compilers
sun.os.patch.level=unknown
svnkit.http.methods=Basic
svnkit.library.gnome-keyring.enabled=false
user.country=AR
user.dir={home}/Development/oepe-indigo
user.home={home}
user.language=es
user.name={username}
user.timezone=America/Argentina/Buenos_Aires
weblogic.home={home}/Oracle/Middleware/wlserver_10.3
Thanks!!run this one in command prompt and then convert the applet using converter tool
JC_HOME = C:\java_card_kit-2_2_2\bin\
set CLASSES=%JCHOME%\lib\apduio.jar;%JC_HOME%\lib\apdutool.jar;%JC_HOME%\lib\jcwde.jar;%JC_HOME%\lib\converter.jar;%JC_HOME%\lib\scriptgen.jar;%JC_HOME%\lib\offcardverifier.jar;%JC_HOME%\lib\api.jar;%JC_HOME%\lib\installer.jar;%JC_HOME%\lib\capdump.jar;
D:\NareshPalle\jcardRE\Smart\src>java -classpath %_CLASSES% com.sun.javacard.con
verter.Converter -out EXP JCA CAP -exportpath .\exp -applet 0x0a:0x00:0x00:0x00:0x0e:0x01:0x02:
0x03:0x04:0x05:0x06 PackageName appletName 0x01:0x02:0x03:0x04:0x05:0x0
6:0x07:0x08 1.0
or
go to following directory and run the converter tool in command prompt
step 1: cd C:\java_card_kit-2_2_2\bin\
then run this command under the above directory
step 2:converter -classdir E:\Pathof Your applet class file -out EXP JCA CAP -exportpath E:\path of exp files folder -applet AID PackageName AppletName PackAID major.minor no
For more doubts mail me....
*[removed by moderator]*
Thanks and Regards
NareshPalle
Edited by: EJP on 31/03/2012 20:09: removed your email address. Unless you like spam and unless you think these forums are provided for your personal benefit only, posting an email address here serves no useful purpose whatsoever. -
An error occurred during swf generation
Hi I have a spread sheet has quite a lot of formulas in it,
eg..
=COUNTIF()
=COUNT($H$2:$H$65536)-COUNTIF($H:$H,"<51")-COUNTIF($H$2:$H$65536,">60")
=DCOUNTA($A$1:$L$15099,10,M38:N39)
=IF(V18=0,0,IF(V18=1,IF(W18=0,0,IF(W18=1,IF(X18=0,0,IF(X18=1,1))))))
=IF(SUM(V18:W18,$BD18)=3,1,0)
=SUMIF($L$2:$L$65536,BN6,$U$2:$U$65536)
=SUMIF($BC:$BC,$BS2,BE:BE)
all of which seem to be supported in xcelcius engage 2008 (sp3)
but when i try to preview the dash board I get the "an error occurred during swf generation and so on" error
I have checked all of my addins on excel and disabled them all,
I have checked to see if there is any blue tooth settings in the registry, (all seems ok (none))
Does xcelcius have limitations on file size? My file is 23,852KB
My calculations are based on a maximum of 15000 rows
I'm desperate for some kind of solution as this has now been driving me nuts for 5 days
SteveDCountA does work! :
I had a similar issue with Xcelsius and DCOUNTA does work! NOTE: DCOUNTA does work, however, it doesnu2019t perform the same way that it does in Excel (which is very confusing). In my case, in excel when I left a criteria cell blank, it would basically omit that criteria. As if to say in SQL (Considering fields County, Industry and Class)
Select * From Table Where County = Wicomico, MD AND Industry = Retail
However, once compiled as an SWF it was as if it were saying:
Select * From Table Where County = Wicomico, MD AND Industry = Retail AND Class = u201Cu201D
Sou2026to make it work you must use the WILDCARD Operator * in the criteria cell to indicate ALL.
Select * From Table Where County = Wicomico, MD AND Industry = Retail AND Class = *
And it worksu2026
See a modified example dashboard of the difference between * and u201Cu201D at: http://staff.salisbury.edu/~jrgarrity/dcounta.swf
Download the Excel Model at: http://staff.salisbury.edu/~jrgarrity/dcounta.xls
See more DCOUNTA functionlity at:
http://office.microsoft.com/en-us/excel-help/dcounta-HP005209050.aspx -
Crash at compilation/Intermediate files generation LV FPGA module
Hi.
I'm in desperate need of assistance.
I have been using LabVIEW 8.6 with FPGA module running at Win XP for som time now and I have never encountered any crash while compiling before.
I get one of those Error messages where I just can send an error report to Microsoft.
I use the FPGA target RIO0, PCI-7833R and have designed a FPGA interface-VI including a number of functions. When I right-click at the VI and choose Compile, generation of Intermediate files begins. Now I never get further than the before LV crashes. Each and every time.
I have no problems opening the project file or my FPGA VI, updating them or saving them.
Grateful for help. Thanks!
/HenrikHi!
Thanks again for good ideas. Unfortunately it didn't help repairing. I tried with both FPGA Module and the FPGA compile server (even though the compilation process never reaches that far) without success. I even tried to repair the whole LabView 8.6 but with the same result.
Even before repairing I have been able to make another small VI work its way through the whole compilation without crashing. But when I replace the small VI with the previously "failing" VI, it crashes again. I have also tried to cut away most of the functions of the VI but it still crashes.
Is it possible that I have some kind of bad reference, some missmatch when instanciating and mapping any of the VHDL nodes or something like that that causes the crash? Still one would think that this should generate an error in LabView rather than generating a "windows crash", but maybe something can cause the file generator to fail completely. It has been working before and I did a very small change when the crashes started, but something is obviously wrong, so...
Since its crashing even before connecting to the compile server, do you think I can rule out any damage/failing on any of the HW (e.g. the National specific HW and my external board and the on-board FPGA? Since I'm running out of ideas myself I guess I could look into that as well, but I can't see that that's the problem.
BR
/Henrik -
Error during generation of the function module..need help urgently
Hello everyone,
m trying to generate data source in BWDevelopment.
After mapping all the BW fields to Source Object elements I click on Generate DataSource(for UD Connect) so following error comes
'An error occurred in step 1 during generation of the function module'
RFC connection is fine, error free and extractor is also fine.
Where could be the problem?
Thanks & Regards,
PriyankaHello everybody,
my problem is solved.For the UDConnect, whatever DATA SOURCES you create gets registered in a FUNCTION MODULE which has a capacity of only 99 enties, so to increase it implement the SAP NOTE 876340 - UDC Error available on SERVICE MARKET PLACE.
This problem occurs with BW version 3.5 level 17 or below.
Regards,
Priyanka
Edited by: Priyanka Joshi on Jun 10, 2008 11:03 AM -
During iTunes installation, when it comes to installation phase "Registering iTunes automation server"... I am getting following error message:
"Microsoft visual C++ runtime Library"...
"Runtime Error! Program: C:\program files (x86)\iTunes\iTunes.exe"
"R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
My system is Windows 7 Enterprise - Service Pack1Check the user tip below.
https://discussions.apple.com/docs/DOC-6562 -
Hello All,
Posting this problem here and hoping for a solution from the experts in this forum.
When i have restarted the Analysis Services , i see that it has been stopped but never started back. It fails with an error
"The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
When Checked the Event Viewer i see the following error -
The service cannot be started: The following system error occurred: The filename, directory name, or volume label syntax is incorrect. File system error: Error occurred during the creation of directory: '\\?\E:\OLAP\MSSOLAPFactory\OlapData;M:\Test
Backup'.
I remember changing the BackupDir value of Analysis Services few days back, and i think it could have impacted. Can you please help me how can i change back the BackupDir value and have the server back?
Let me know if you need any more details
SGIs this still an issue? If so, I would find msmdsrv.ini and make sure you don't have two folders listed in the BackupDir (or DataDir or TempDir). You'll have to runas Administrator to edit the msmdsrv.ini file and save changes. Once you fix that, it should
succeed.
http://artisconsulting.com/Blogs/GregGalloway -
Lsmw Error during the specify files
While doing Material master upload thru lsmw...using Batch input method
During the specify files step i am getting this error
File Name 'Converted Data': Max. 45 Characters. Remaining data saved.
Message no. /SAPDMC/LSMW_OBJ_060028
Pls Guide me.......Hi,
How you save your source file? Need to be saved in as TAB delimited file
OK. Check link:
http://www.sap123.com/a/98/#loading-material-masters-with-lsmw-direct-input-method
http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench
Regards,
Biju K -
ERROR:Could not read archive file - during Processing Base System Part 2
Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b -
Error occurred during automatic upgrade of MDL file
The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory
Maybe you are looking for
-
Check the Stock of a particular material is available in SAP R/3 from Java
Hi all, We have both SAPR/3 and Java Based Systems and going to integrate with XI. For Java user is it possible to check the Stock of a particular material is available in SAP R/3 system or not. For this requirement can we create any scenario and get
-
Hello I edit using an 27 inch IMac as my main FCP screen and an older monitor to display the Browser. When I hit Command/F12 to payback a sequence full screen, the image goes to the secondary, inferior monitor. Can't drag the display to the higher
-
Error 3347 when playing DRM content on Android with AIR 3.9
Hi, Recently we decide to upgrade our app to use AIR 3.9 SDK and apprently we can no longer watch any DRM content (both HDS and EST) on some Android devices (like Google Galaxy Nexus) anymore. Before we never have any problem watching our content on
-
Lightroom Responsiveness When Working on Images
I have loaded around 200 images into Lightroom and have instructed Lightroom to render standard (1600 DPI) and 1:1 previews. My computer is a Windows XP Athlon dual-core machine with 2 GB of Ram. The operating system is on a 10K Raptor drive with the
-
Data access from Access Database
I want collect some data from access, I have created a frame with swing componet, now when I am searching data with some variable from Access database , it is not comming, but in simple case all data are comming in differnt places in my frame. The st