Error 65016 when trying to open Dreamweaver

When I try to open Dreamweaver, I get an error message that just says "65016" and the program crashes. I tried to reinstall using my original installation DVD's, but apparently the install application is no longer compatible with my current version of Mac OSX (10.9.4). The rest of my CS3 suite works fine, it's just Dreamweaver. The program version is CS3 v. 9.0 Build 3481.
I hope that there is an easy solution to this, aside from having to repurchase Dreamweaver...

Hi Giannil,
Found a discussion on the Apple forum that has solutions you could try.
Dreamweaver CS3 won't launch on new Mac | Apple Support Communities
Thanks,
Preran

Similar Messages

Error message when trying to open windows7 via vmwarefusion.

error message when trying to open windows7 via vmwarefusion.;
Unable to open file "/Users/geraldw/Documents/Virtual Machines.localized/Windows 7.vmwarevm/Windows 7-000016.vmdk": The system cannot find the file specified.
I've completely uninstalled vmaware fusion. and would like to install a new copy of windows7 plus my vmware fusion3.0 that I have on a disk. I wonder if windows7 is still buried in my mac hard drive somewhere? I can see some windows files on my mac but they appear a gray and can not be accessed. Could there be a problem installing a new copy of windows through boot camp? It seems to do so wouldn't be a clean install as I suspect that windows 7 is still on the drive somewhere. I've tried to follow the path the file I listed above, but nothing comes up. I'm almost certain it was accidentally deleted completely from the hard drive as it was quarantined while using Clam X anti-virus. I'm a relatively new mac user and long time PC user, but a computer genius I am not. I don't want to have to reformat the whole mac machine and lose my current files, etc.
I've uninstalled vmare completely and reinstalled, it, but the problem persists.
Any help?

You will probably get a better response asking this question in VMWare's forums for Fusion.
Best of luck.

Error message when trying to open.....

I am getting this error message when trying to open iDVD project files from external drive on new mac book pro
Project Locked By other user
The project NYFA MARK Submission is locked by the user johncriscitello (user ID 501): 2009-12-29 01:06:50 +0000.
The project can't be opened at this time.
any ideas??

Hi Jcrisci
Welcome to apple discussions. I see this is your first post.
Any chance there are multiple users on your mac w/ separate accounts each? And are you working from the Admin account on this mac?
Message was edited by: SDMacuser

Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
Have repaired , reinstalled , created and used a restore point etc etc
How do I fix this !!! Please

...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

I am gettin an error message when trying to open a contact: "There was a temporary problem accessing your address book. Please try again in 10 minutes."

I am using an Yahoo Email and I can open a list of contacts but getting an error message when trying to open any of them. My OS is Windows Vista Service Pack 2 installed on a desktop.

Does this issue occur on another browser? If this issue does occur on another browser then I would like to say that it is a Yahoo issue and not a Firefox issue.

Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

I am receiving an error message when trying to open any application in the Office for mac suite
Any suggestions??

Hello
you can try - remove and re-install microsoft office
you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
you can try use font book too detect font conflict / problem
you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
HTH
Pierre

Acrobat 9.0 error message when trying to open

Just got this error message when trying to open Acrobat Pro 9.0:
Has been installed for 6 month, use 4-5 times per week, never had an issue until this. Usually I would do an 'Uninstall' 'Reinstall' before coming to the forum, but it will not allow me to do a 'deactivitation'.Any help at all, thanks.
System Info:

Good day,
You can initiate a Repair installation from Control Panel > Programs by clicking on the Acrobat 9 installation, choosing 'Change' then following the prompts for a repair install.
I missed the part where you mentioned the error was occurring on launch. Sorry about that.
Kind regards,
David

I recently upgraded to Mac OS X. I hadn't try to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

I recently upgraded to Mac OS X. I haven't tried to access anything in iWorks 09 since the upgrade, until now. I get an error message when trying to open any of the iWorks 09 applications. What's the fix for this?

Follow Sonicray's advice and when you post try to give as much info about your Mac, your OS, etc... Fill out your Profile info.

Error - 50 when trying to open iTunes. Have tried uninstalling all 6 components and reinstalling but no joy :(

Error - 50 when trying to open iTunes. Have tried uninstalling all 6 components and reinstalling but no joy Happened after an upgrade. Can anyone help?

By way of experiment, let's try launching iTunes as an administrator.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit version of Windows, open the "Program files" folder.
If you have a 64-bit version of Windows, open the "Program files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Does it launch without the -50 now?

HT1925 I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng. Where do I get this missing DLL. Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.

I get error 23132 when trying to open a M4v file

I use to be able to play m4v files on both iTunes and Quick Time 7. Suddenly, after upgrading iTunes, I get error 23132 when trying to open a M4v file. How do I fix it to view the files on QuickTime?

There is software you installed to work with your company's cloud service, update it or talk to the developer.
If it's Apple's software, then run through this list of fixes.
..Step by Step to fix your Mac

I'm receiving and error (-50) when trying to open itunes 10.5 beta on OSX 10.7 beta. Any suggestions would be greatly appreciates!

I'm recieving and error (-50) when trying to open itunes 10.5 beta. Any suggestions would be greatly appriciated!!!

As a registered developer which should be the only way you have access to the iTunes and iOS BETA, you have access to direct communication with the appropriate Apple personnel and/or access to the Apple forums for registered developers.

I get this error message when trying to open a catalog.

I get this error message when trying to open a catalog. "error message: unexpected error opening catalog"

Hi Ian.
Thank you for answering. But I find no such file in Preferences. I think Lightroom freezes before making the preference file. Other solutions?
Best wishes,
Magne
6. okt. 2012 kl. 11:43 skrev Ian Lyons <[email protected]>:
Re: Help! Lightroom freezes after installing.
created by Ian Lyons in Photoshop Lightroom - View the full discussion
Have you tried trashing the Lr preference file? More details of location at http://forums.adobe.com/thread/358041?tstart=0
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4753899#4753899
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4753899#4753899
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4753899#4753899. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Keep getting error 7 (windows error 1114) when trying to open i Tunes. If i follow given advice to uninstall i tunes / reinstall - will I lose all my library/purchases etc. As u can see i am preety computer illiterate - but i got this far. Advice please!

keep getting error7 ( windows error 1114) when trying to open i tunes. If i uninstall/reinstall will i lose my library/purchases etc. Sorry not very computer literate so easy instructions appreciated.

See Troubleshooting issues with iTunes for Windows updates. Your library should be safe, but you ought to back it up anyway.
tt2

Error 65016 when trying to open Dreamweaver

Similar Messages

Maybe you are looking for