Error 69 when restoring itunes library

I just recently had to recover my computer. But I did back-up my itunes library on a disc. Now when I try to restore my itunes library from the disc I get an error -69. Can anyone let me know how how I can fix this.

AceNeerav wrote:
I tried copy pasting the itunes library from the most current backup in the TM drive that was used to backup the old hdd.
Don't copy & paste.
Just use TM to restore it.

Similar Messages

Permissions error when restoring itunes library from old hdd's TM backup to new SSD OS X Music folder...

Hello,
I got my self a new SSD and installed Lion in it from the internet. I tried copy pasting the itunes library from the most current backup in the TM drive that was used to backup the old hdd. I keep on getting "not enough permission" error for every single file. This same happens when I restore using Time Machine by navigating to the foler using the option "Browse Other Backup Disks"
Note: There is no encryption problem here AFAIK cause i never used encryption on any of my drives.
Please help me restore iTunes library and iPhoto library form the backup. Thanks.
Neerav

AceNeerav wrote:
I tried copy pasting the itunes library from the most current backup in the TM drive that was used to backup the old hdd.
Don't copy & paste.
Just use TM to restore it.

Restoring itunes library from a backup

I copied my iTunes folder into a backup drive. My hard drive died, and now I want to "re-connect" my iTunes with its library. How can I do it? Simply pointing iTunes to the library location doesn't work.
I need to be able to sync my iphone, etc... Help!

When restoring Itunes library from a backup DVD, will it overwrite anything already in the library?
No.
(47058)

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms are appreciated.

Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open. How can I fix this?

When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

TS1424 error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!

i get error (-42110) when opening itunes, error (3014) when trying to restore ipod. my ipod is now frozen and the screen says connect to itunes. help!

Did you forget the passcode?
http://support.apple.com/kb/ht1212
http://support.apple.com/kb/ht1808

How to successfully revert to itunes 6.0.5 and restore itunes library.itl

Hi guys,
Since I have now successful restored my software (and so once again have a working ipod and itunes software - no thanks to Apple for the buggy upgrade) - I thought I would share my experience of how I successfully went about this - since it was only through reading different threads on this forum I worked out how to do it.
1) Before you do anything - I recommend you have a back-up of your music somewhere just incase. Burn yourself a data disk or two of your music files or make a copy of your itunes folder elsewhere on a hard-disc drive.
2) Uninstall Itunes version 7 (or otherwise) - follow these steps to do this:
Quit iTunes.
On the Start menu, click Control Panel.
In Control Panel, open Add or Remove Programs.
Select iTunes from the list of currently installed
programs, then click Remove.
When asked if you would like to remove iTunes,
select Yes.
3) Reinstall Itunes version 6.0.5 - you can find a download link to the setup program for version 6.0.5 on the right hand-side of this page (it's the blue hyper-link which says '36MB'):
http://www.apple.com/support/downloads/itunes605forwindows.html
Download and re-install that.
At this point don't panic if Itunes will not open.
4) OPTIONAL STEP - If Itunes version 7 or the Ipod software version 2 messed up your ipod (i.e. deleted it's tunes etc.) now might be a good time to do a RESTORE on your ipod. You will find, thankfully, that the old ipod updater works once again now itunes 7 has gone - phew!
5) Try to open iTunes - if you're lucky it will open and all will be back as it once was before. Typically however it may open and your music library is missing, or it may not even open at all giving you the friendly error message "The file itunes library.itl canot be read because it was created by a newer version". Again, don't panic! You are nearly there - honest. Just follow the following steps to restore your itunes library to it's former glory:
Quit iTunes.
Locate your iTunes folder.
For Microsoft Windows the iTunes folder is usually stored in \Documents and Settings\username\My Documents\My Music\
Open your iTunes folder.
Drag the iTunes Music Library.xml to the Desktop
Drag the following file from your iTunes folder to the Trash:
Microsoft Windows: "iTunes Library.itl" (in versions of iTunes prior to 4.9 this was called "iTunes 4 Music Library.itl")
Open iTunes.
From the File menu, choose Import.
Tip: Do not add any music into iTunes at this point.
Navigate to the iTunes Music Library.xml file on the Desktop.
Click Choose.
6) Give a small prayer to whatever deity you may, or may not, believe in.
7) Open iTunes & (hopefully) boogie-tastic!!!!
8) Dance around the room in celebration that your iTunes music is - simply - BACK THE WAY IT ALREADY WAS BEFORE - cheers APPLE cheers!
xxx
If you have any other error messages - like you can't see your ipod in itunes or whatever - I may be able to help. I believe I have put more man-hours into getting my ipod to work as it should that the cost of the little blighter 7 times over. So chances are, if you have an issue I may have a fix. :o)
Good Luck - Happy podding!

P.S. You may also have to Deauthorize and reauthorize your account in iTunes
In some cases iTunes may "forget" that your music is authorized. You can refresh the authorization by deauthorizing and then reauthorizing your computer. To deauthorize a computer:
In iTunes, choose Deauthorize Computer from the Store menu (your computer needs to be connected to the Internet).
In the resulting dialog, enter your Apple ID and password.
Click OK.
You can now reauthorize your computer by simply trying to play one of the songs you've purchased. A dialog box will appear asking you to enter your Apple ID and password. Once you have done so, click Authorize to finish the process.

I Get an Error "To Access Your iTunes Library ..." And Other Things Are Wonky Too ... Can't Reset ... Internet Radio Drops ... But Things Look To Be Set Up Okay

When I use my Apple TV and try to play music from my computer I get an error: "To access your iTunes library on Apple TV, turn on Home Sharing in iTunes on your computer using 'myname'"
On my computer n iTunes Preferences / Sharing I have the "Share my library on my local network" checked with "Share entire library" -- no password, no update play counts. I've turned it off and on again.
The Apple TV settings show we are "talking to" my WIFI -- it has my network, shows a good signal strenght, all sorts of internet addresses and IP stuff I don't understand ...
The "Internet" tab works with some of those things I'd never use -- like I see the current NHL standings.
My TV works and I get an ATV signal and those little chimes / bongs when I hit things in the menu. And when it works I get audio so the cables and TV are okay.
In the past I had trouble with the settings for my favourite Internet Radio stations (the provider changed their URL but Apple didn't update the presets for a while) but those are now resolved.
I had a crappy old G class router and week signal strenght but I have a new N class Cisco router with a strong signal.
But other things are wonky:
* I play interent radio and my station will go fine for about five minutes then stop -- the little wheel spins trying to reconnect. Sometimes it resets but more often than not it won't. I just tried again four hours later and the same thing.
* I've unplugged the ATV and plugged it back in but no noticable improvement
* I tried to do the factory reset from the ATV menu. It says it will download the latest bla bla bla and after a few minutes tells me "Apple TV can't download latest update right now, try again later" -- I've tried three times today always with the same results.
* I unhooked it from the power and HDMI and plugged it into a Micro USB cable and plugged that into my Mac -- it doesn't show up in the devices in iTunes.
* I have a bunch of photos in a folder that I use for my ATV Screen Saver. A few weeks ago I added two photos to that folder -- they don't show up in the ATV screen show but the others still do.
* When I started today I checked my iTunes and the airplay icon didn't show in the bottom right (beside the genious icon and the little thing to show or hide the sidebar). Now I noticed the Airplay icon is there. When I try to switch from playing through my computer speaakers to my Apple TV I get an error "An unknown error (-15006) occurred while connecting to the Airplay device "Apple TV"" -- the ATV shows that Airplay is on.
* I see from the ATV settings that I'm running ATV Software 4.4.3 (3323) and when I do a "Update Software" on the ATV it tells me that my software is current.
* My iTunes is 10.5.2 (11) and my OS is 10.6.8 -- both are up to date.
Yikes and double yikes!
Any ideas?

Hey Chunk,
I love the idea of the ATV more than I have loved the little black box but ... famous last words ... my ATV seems to be working better these days.
A big challenge for me was too many variables at play -- new router, new ATV OS / firmware / whatever, changing internet radio presets, a less than perfect physical set up ... and a short attention span from yours truly.
Here's what I did. Somwhere in these changes things got "fixed."
* I unhooked the ATV and did a factory restore by hard wiring the ATV to my computer with a micro USB cable (no external power needed) working through iTunes (I run iTunes 10.5.2 on an iMac with OS X 10.6.8).
* after the reset I now have ATV (is that an operating system or a firmware?) 4.4.4
* then I plugged it back into my home theatre and it didn't work :-) but in slightly different ways. The settings showed that I was connected to my home network but I couln't get connected using my Apple ID and no internet radio. (it is often counterintuitive -- like why when I want my ATV to talk to my iMac over my local network am I logging in to the iTnes Store with my Apple ID? but there you go.)
* I booked with the genius bar at the Apple Store and put my ATV in my pocket. They pulled out a TV, HDMI cable, ATV power source and even the remote -- all I provided was my little black ATV. We hooked the ATV to their TV and from the Apple Store (using thier WIFI) I logged in using my Apple ID and the thing worked fine.
* so now I knew that my ATV was up to date and it worked in the Apple Store using their network so it looked like the issue was my network.
* rebooted my router and noticed that when I had upgraded to the new super dooper Cisco n router we had plugged my iMac direct to the router via ethernet cable. I unhooked the ethernet and now just run my computer WIFI using AirPort.
And ...
It works. I use my ATV exclusivly for music -- my iTunes and internet radio and AirPlay -- and now both work fine. The ATV does pick up photos from my iPhoto for the screen saver and all that other stuff -- netflix, youtube, the hockey scores, ... all seem to be there. And my son played a video off his iPod Touch using AirPlay.
I know my approach is more scattered than a proper scientific try but ...
From my experience ... reset the ATV and get it up to date; see if it will work on someone else's network; check your network set up.
Good luck!

Error message saying "new itunes library"

downloaded the latest itunes now when i try to open itunes just get error message saying "new itunes library"

Try this approach:
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
If that doesn't work go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2

Error message when updating Itunes...can not open Itunes program

I am recieving error message when updating Itunes for my computer. The error message reads "MSVCR80.dll is missing and the other error message reads Error 7 (Windows error 126)" I can not open my Itunes. I have reloaded the Itunes onto my computer but still have the same error messages. Please help.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99364)

How do I restore iTunes library from Backup files on External Hard Drive?

How do I restore iTunes library from Backup files on External Hard Drive and keep the new iTunes library on the External Hard Drive. I have all the media and playlist and .xml .itl files, just want the iTunes to recognise the content.
I backedup my iTunes content by dragging to External Hard Drive. Formatted and reinstalled OS. My iTunes content is so large, that I wish for the Library and content to remain on the External Hard Drive. I have all the music files and playlists, I just cannot get the iTunes application to display all the content. Hoping to Not have to drag and drop all the content to be recopied into new iTunes organised files.
Troubleshooting this by researching other conversations on the web, I have come stuck for a solution. One Troubleshoot told me to hold down the Command key and then lauch iTunes and a dialogue box will appear to Choose a new library, however when I try this, no Dialogue box appear to give me the option!?

It sometimes has that funny switch symbol on it too.
tt2

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

Received this error message when starting iTunes and reinstalling does not resolve it: The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
Can I uninstall existing iTunes without losing my media library? and then install fresh to fix this problem?

Hi there kweitkamp,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299
-Griff W.

Error message -48: The itunes library file cannot be saved.

Hello,
When I open up my itunes i get an error message 48 - the itunes library file cannot be saved. All my data is there - music, podcasts etc. Just wondering if this error message means anything, if so what, and what I can do to fix it?
Thanks!

I just called Apple Support and I think they helped me, but I'm still waiting to see if the error message returns. I was experiencing the same problem. Whenever I started iTunes, I would get the -48 error message. Everything else was working fine. Apple Support instructed me to delete some files from a folder and restart my pc. I did this and it seems to have worked. The folder is on my C:/ drive. Using Windows Explorer, I went to my C:/ drive and then opened the following folders in this order: "Documents and Settings", "Administrator", "Application Data", "Apple Computer", "iTunes", "iPod Software Updates". Inside the iPod Software Updates folder, I found four files which I deleted. I then emptied my trash can and restarted my pc. After I restarted my pc and opened iTunes, the error message did not come up. So it looks like my problem has been solved. Just some minor glitch having to do with the last update. I should mention that I did just get an iPod Classic 80 gig which replaced my 30 gig iPod Photo which just died.

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

After installing iTunes 10.3.1 it won't open, error message - "the file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes"

new iTunes won't open. Error says cant read iTunes Library.itl becuase it was created by a newer version of iTunes.
I had just installed iTunes 10.3.1 as was instructed by the Genius at the store.

I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

Error 69 when restoring itunes library

Similar Messages

Maybe you are looking for