Error 7 goopsup - source does not exist

The test sequence works fine on the development machine, but I get the error, mentioned above, when I try to assemble the test sequence VIs for run time distribution.

Shannon,
It was pretty hard to locate the vi that had caused the problem because the error message did not contain any information that could help, such as step or vi name. When I narrowed the problem to a particular test sequence I saved it into a separate sequence file by copy/paste the sequence. Then I opened the VI from the new sequence file by Edit code and saved the vi because it showed that it was changed.
I tried to assemble the VI of the new sequence and I did not get any errors: the problem disappeared. Now I can assemble the VIs of the original test sequence.
I think the problem was caused by a bad subVI path that was fixed when the VI was opened, then saved.
To summarize, I would say the following: the major problem was to understa
nd and locate the problem.
An appropriate error message with the step and vi names could help to fix it sooner.
Peter

Similar Messages

Compiling a vi with link to an external non NI dll = error 7 "source does not exist""

I'm trying to compile a vi using Application Builder. The vi contains a number of links to drdaq32.dll (a dll to give access to Picotech�s DrDAQ data aquisitiion unit. This is connected via the parallel port and comes with a BNC connector and a high impedance input suitable for pH probes). Communication with the dll is via code interface nodes).
System:
LabVIEW v. 6i
Windows NT4
DrDAQ and DrDAQ.dll via parallel port (lpt 1) www.picotech.com
Code interface node calls to the dll use a standard (WINAPI) calling convention and �run in UI thread�
When I try to build, I get the error
"Error 7 occured at ......drdaq32.dll - source does not exist"
The source does exist. I hav
e got the same error with the dll in the same directory as my vi and in a sub directory data.
Why does Application builder refuse to see this file ??

I don't believe that this is the case.
Application builder is really very specific about what files are available and in what state. Though it is not really documented anywhere to my knowledge, the proper steps to building an application are as follows:
Before doing this, LabVIEW should be closed, and all other VIs out of memory.
1. Open your top level VI.
2. Click the run button to recompile
3. Choose "Save All" from the file menu
4. Close your top level VI and ensure that all VIs are saved properly.
5. Quit LabVIEW
6. Open LabVIEW - DO NOT open any of your VIs. Open LabVIEW from labview.exe via the start menu or other shortcut!
7. Open a new VI.
8. Open the application builder (tip, I went into the projects folder and
pulled a shortcut of the app builder out and onto my start menu, this opens the app builder fresh after LabVIEW has been exited.
9. Proceed with your build as normal.
The problem is that LabVIEW retains VIs in memory, even after they are all closed. If there is anything incomplete about these VIs, this will affect the build process. Unsaved VIs do not show up as being valid files (or something like that) to the app builder, thus if you didn't save even one single VI and try to build the application, you will get an error 7.
Step 1 is specific to your case, as recompiling ensures that all external connections are properly made.
If you still have the problem, post here and let us know.

Compiling a vi with link to dll = error 7 "source does not exist"

I'm trying to compile a vi using Application Builder. The vi contains a link to imaq.dll (a part of the NI vision pack).
When I try to build, I get the error
"Error 7 occured at Imaq.dll - source does not exist"
But the source does exist, and it is not hidden, read-only or blocked by security policies.
Why does Application builder refuse to see this file ??
I tried copying the file to the base dir of the vi, and added it to the build from there => same problem.
System:
LabView v. 6i
Imaq v. 2.5
Windows NT4

Hi Angelo,
If the vi is working properly under LV, then you can try to register the IMAQ.DLL
Execute the following command:
REGSVR32 "the complete path of IMAQ.DLL"
You should get a message that it has been registered; then try again.
Good luck,
Alberto

While creating Update rules -"Error Info source does not exist"

While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active.
here is error:
No communication structure exists in version abc... A
Message no. RSAU251
Diagnosis
In order to be able to maintain the update rules an active communication structure must be available.
Procedure
This error message can have two causes.
No active communication structure exists.
Activate the communication structure in the Data Warehousing Workbench.
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
<<text removed>>
Thanks,
Vasu
Edited by: Matt on Apr 26, 2010 9:31 AM

Hi Vasu,
as it clearly shows below message
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
Create an info source first and assign it to your datasource and map the fileds in transfer rules and activate it.
Then try to create the update rules between your target and info source.
Hope this helps.
Regards,
Reddy

Source Does not exists

Hi Friends!
Please, I need your help with this issue!!
I generate 'Export Datasource' in development server.
When I replicate them in Testing server, I replicate these as RSDS, and NOT as 3.x datasources (yes, was not a good idea)
Now in testing server, I can see the datasource, but when I try to 'access to 'Display' in the context menu, give me the error msg:
"The DataSource 8CRN_PPP (QBICLN00) does not exist"
The rules (RSDS from datasource to infocube), are inactive too, and when I try to display or activate this, give me the error msg:
"Source does not exists"
How can I solve this?
PLEASE, I NEED YOUR HELP!!
Edited by: SSap on Aug 14, 2009 2:12 PM

Hi,
Seems that your export datasource is having the problem. 1st check it the activate mode of your export datasource in dev n transport to testing.
whiloe transporting the dataflow yiou need to transport your export data source also. i hope you missed this object in your transport request.
Thanks
Aravinda

LV 8.5.1 AppBuilder error source does not exist

Hi,
I have a rather strange problem:
Every time I try to to build a VI that was converted from LV 7.1.1 to LV 8.5.1 I get an error that the source does not exist,
although the VI is there and the Preview-build does not throw an error :-/
When trying to build a VI created with LV 8.5.1 the build succeeds of course.
Does anybody have faced similar problems?
The VI and the project should be attached...
thx a lot,
Leo
Attachments:
SourceNotExisting4.zip ‏5 KB
SourceNotExisting5.zip ‏5 KB

Hi Johannes,
I have already converted and saved the VI to LV8.5.1.
Anyway, here are the steps to reproduce the problem:
1. Open the LV7.1.1-VI using LV8.5.1
2. Save it with LV 8.5.1
3. Create a new project containing the VI and having it as startup VI in an Application
4. Trying to build the application --> leads to the "source does not exist" error
Attached is the source VI (vers. 7.1.1) causing the problem.
thanks in advance,
Leo
Attachments:
Check_Pfad.vi ‏44 KB

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Error 7 occurred at source does not exist

I have VIs written in LabVIEW 6.1 and works fine. I try to use LabVIEW 7 to build it. But I got error:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
Application Builder: Error copying files.
It does not point out which file is not exsisted? Why?

Hello �
From your question, I understand that you are trying to build an executable for LabVIEW 7.0 of some VIs that were built in LabVIEW 6.1.
You need to save all the VIs and subVIs that will be contained in the executable (or DLL) in LabVIEW 7.0 first. For this, the only thing you need to do is to open them in LabVIEW 7.0 and re-save them. If you want to keep copies for both versions of LabVIEW, you could even create a different folder for the version 7.0 ones. When re-saving your VIs just go to File >> Save As and browse to the directory you just created.
Then, you will be able to build the executable for LabVIEW 7.0.
Another possible solution to the problem is what is mentioned in this 5F09C86256745006E4494?OpenDocument>Knowledgebase.
Hope this helps!
S Vences
Applications Engineer
National Instruments

RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Hi All,
I am getting the error "RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAILURE" when planning sequence (IP) is executed. Can some one help me please asap.
Regards
Kiran

Hi,
Please go to sm59 and check if the RFC connection exists for this source system. If its there, please double click on it and on next screen, go to Menu bar and click on Test-> Connection and then test -> authorisation.
If you get any error, thats the reason. If you dont find the RFC at all, thats the reason why you got error.
You may also check WE20 for partner profile, whether it exists or not.

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

ERROR: ORA-01041: internal error. hostdef extension does not exist

Hi, I got the following error message when I tried to insert a row in table TBL_ORDER.
ERROR:
ORA-01041: internal error. hostdef extension does not exist
INSERT into TBL_ORDER
ERROR at line 1:
ORA-03113: end-of-file on communication channel
We have Oracle version 8.1.5.o.2 and Linux version 6.1.
Following are the tables, triggers, loadjava definition and source programs:
TBL_ORDER
1 ORDER_MEMBER_FIRM_ID VARCHAR2(4)
2 ORDER_CLIENT_ID VARCHAR2(4)
3 ORDER_BRANCH VARCHAR2(3)
4 ORDER_SEQUENCE VARCHAR2(4)
5 ORDER_EXCHANGE_ID VARCHAR2(3)
6 ORDER_EXCHANGE_SEQUENCE VARCHAR2(7)
7 ORDER_CREATE_DATE DATE
8 ORDER_TYPE VARCHAR2(2)
9 ORDER_STATUS VARCHAR2(1)
10 ORDER_SYMBOL VARCHAR2(5)
11 ORDER_SUFFIX VARCHAR2(14)
12 ORDER_SIDE VARCHAR2(5)
13 ORDER_PRICE VARCHAR2(20)
14 ORDER_STOP_PRICE VARCHAR2(20)
15 ORDER_PRICE_QUAL VARCHAR2(10)
16 ORDER_QUANTITY VARCHAR2(6)
17 ORDER_TIF VARCHAR2(4)
18 ORDER_AON VARCHAR2(4)
19 ORDER_DNR VARCHAR2(4)
20 ORDER_CASH_NEXT_DAY VARCHAR2(4)
21 ORDER_SELLER VARCHAR2(4)
22 ORDER_ACCOUNT_TYPE VARCHAR2(4)
23 ORDER_OS_TS VARCHAR2(4)
24 ORDER_BOOTH_ID VARCHAR2(4)
TBL_CMSOUT
1 CMSOUT_MEMBER_FIRM_ID VARCHAR2(4)
2 CMSOUT_CLIENT_ID VARCHAR2(4)
3 CMSOUT_DATA VARCHAR2(120)
trg_order.sql
create or replace procedure OrderToCmsoutProc(cms_member_firm_id VARCHAR2,
cms_client_id VARCHAR2,
cms_branch VARCHAR2,
cms_sequence VARCHAR2,
cms_side VARCHAR2,
cms_quantity VARCHAR2,
cms_symbol VARCHAR2,
cms_price VARCHAR2,
cms_tif VARCHAR2,
cms_type VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'OrderToCmsout.test(java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_order
after insert on TBL_ORDER
for each row
CALL OrderToCmsoutProc (:new.order_member_firm_id,
:new.order_client_id,
:new.order_branch,
:new.order_sequence,
:new.order_side,
:new.order_quantity,
:new.order_symbol,
:new.order_price,
:new.order_tif,
:new.order_type)
commit;
show errors;
exit;
trg_cmsout.sql
create or replace procedure PackCmsoutSidProc(pck_member_firm_id VARCHAR2,
pck_client_id VARCHAR2,
pck_data VARCHAR2)
AUTHID CURRENT_USER
as language java
name 'PackCmsoutSid.test(java.lang.String,
java.lang.String,
java.lang.String)';
show errors;
create or replace trigger trg_cmsout
after insert on TBL_CMSOUT
for each row
CALL PackCmsoutSidProc (:new.cmsout_member_firm_id,
:new.cmsout_client_id,
:new.cmsout_data)
commit;
show errors;
exit;
loadORDERjava
loadjava -r -f -o -user userid/pswd OrderToCmsout.java
loadCMSOUTjava
loadjava -r -f -o -user userid/pswd PackCmsoutSid.java
OrderToCmsout.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class OrderToCmsout {
public static void main(String args[]) {
try {
test (args[0],args[1],args[2],args[3],args[4],
args[5],args[6],args[7],args[8],args[9]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test ( String parm_member_firm_id,
String parm_client_id,
String parm_branch,
String parm_sequence,
String parm_side,
String parm_quantity,
String parm_symbol,
String parm_price,
String parm_tif,
String parm_type)
throws SQLException
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt2;
try {
stmt2= conn.prepareStatement
("INSERT INTO TBL_CMSOUT VALUES (?, ?, ?)");
String datastring = parm_member_firm_id + "\\~" +
parm_branch + " " +
parm_sequence + "\\~" + "\\~" +
parm_side + "\\~" +
parm_quantity + " " +
parm_symbol + " " +
parm_price + "\\~" +
parm_tif + " " +
parm_type + "\\~";
stmt2.setString(1, parm_member_firm_id);
stmt2.setString(2, parm_client_id);
stmt2.setString(3, datastring);
stmt2.executeUpdate();
stmt2.close();
return;
} //try
catch (Exception e) {
System.err.println(e);
} //catch
PackCmsoutSid.java
import java.sql.*;
import java.lang.*;
import java.io.*;
import oracle.jdbc.driver.*;
public class PackCmsoutSid {
public static void main(String args[]) {
try { test(args[0],args[1],args[2]);
catch (Exception e) {
System.err.println(e);
} //catch
} // end main
public static void test( String parm_member_firm_id,
String parm_client_id,
String parm_data)
throws SQLException
try {
Connection conn = new OracleDriver().defaultConnection();
PreparedStatement stmt1 = conn.prepareStatement
("SELECT sid_session_id " +
"FROM tbl_sid " +
"WHERE sid_member_firm_id = ? and " +
"sid_client_id = ?");
stmt1.setString(1, parm_member_firm_id);
stmt1.setString(2, parm_client_id);
ResultSet rs1 = stmt1.executeQuery();
while (rs1.next ()) {
String session_id_found = rs1.getString
("sid_session_id");
CallableStatement pack_pipe = conn.prepareCall
("{call DBMS_PIPE.PACK_MESSAGE(?)}");
pack_pipe.setString(1, parm_data);
pack_pipe.execute();
CallableStatement send_pipe = conn.prepareCall
("{? = call DBMS_PIPE.SEND_MESSAGE(?)}");
send_pipe.registerOutParameter
(1, java.sql.Types.INTEGER);
send_pipe.setString (2, session_id_found);
send_pipe.execute();
} //while
stmt1.close();
conn.close();
} //try
catch (Exception e) {
System.err.println(e);
} //catch
} //test
} //PackCmsoutSid
Thanks in advance for your help
Vinicio

you should post this question on the Application Server forum.
--Olaf

Data source does not exist

Dear all,
am extracting the data from Vistex datasource,IRM/LIS_RM_IPCRASP IP CR Agreement Conditions
after activating in RSA5 i can able to see in RSA6
but while activating the data source after the extract structure has successfully generated,
the system showing data source does not exist
plz help me

hi,
when i click the maintain button save button will appear,
but in my case this save button not highlighting...
when i check in ST22 the system proposed error mesage is table illegal statement,
i found this error in many forums but its not related to datasource actvation,
plz anyone giv me solution as soon as possible...
regards
Edited by: gadhatharan thirunavukkarasu on Oct 15, 2011 7:57 AM

Error : DB Mapping does not exist for the Host in iSetup

Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.

900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

HTTP Error 404 :File does not exist

Hi all,
On Test instance we are not able to open the help file,it give an error
HTTP Error 404 :File does not exist
can anybody have solution for this
it's very urgent
Thanks
shekhar

I have changed the note server definition in the external app to add the mail directory in front of the mail file name 'mail/mufile.nfs' and I get the following error:
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: LotusServiceSession: getConfigProperties(): An error occured
while reading/ retrieving the properties from the the configuration file.
05/04/21 15:15:07 lotusnotes: [instance=(null), id=97176201941,7] ERROR: Unhandled exception in SOAP call
oracle.portal.provider.v2.ProviderException: LotusServiceSession: getConfigProperties(): An error occured while reading/ retrieving the
properties from the the configuration file.

Error 7 goopsup - source does not exist

Similar Messages

Maybe you are looking for