Error 7 occurred at source does not exist

I have VIs written in LabVIEW 6.1 and works fine. I try to use LabVIEW 7 to build it. But I got error:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on UNIX.
NI-488: Non-existent board.
Application Builder: Error copying files.
It does not point out which file is not exsisted? Why?

Hello �
From your question, I understand that you are trying to build an executable for LabVIEW 7.0 of some VIs that were built in LabVIEW 6.1.
You need to save all the VIs and subVIs that will be contained in the executable (or DLL) in LabVIEW 7.0 first. For this, the only thing you need to do is to open them in LabVIEW 7.0 and re-save them. If you want to keep copies for both versions of LabVIEW, you could even create a different folder for the version 7.0 ones. When re-saving your VIs just go to File >> Save As and browse to the directory you just created.
Then, you will be able to build the executable for LabVIEW 7.0.
Another possible solution to the problem is what is mentioned in this 5F09C86256745006E4494?OpenDocument>Knowledgebase.
Hope this helps!
S Vences
Applications Engineer
National Instruments

Similar Messages

Build Question: error 7 occurred at source does not exist

I have VIs built in LabVIEW 6.1. It works and built well. In LabVIEW
7, It works well. But when I try to build it. I got error.
I first use the mass conpile to compile VIs and then build the exe
with default settings. I got:
Error 7 occurred at source does not exist
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted,
or the file path might be incorrectly formatted for the operating
system. For example, use \ as path separators on Windows, : on Mac OS,
and / on UNIX.
NI-488: Non-existent board.
But It does not point out which file does not exist.
Anyone can help me out?

Hello yqin,
Here are some more KnowledgeBases that may pertain to your issue.
Error 7 When Building Applications and DLLs That Use the LabVIEW Report Generation Toolkit
Why Do I Get Error 7 When Building an Executable from a Build Script?
Error 7 at Invoke Node When Building a LabVIEW Executable
If the above KnowledgeBases do not work, we will want to try the following procedure.
1. Open your Main VI.
2. Hold + a
nd click the run arrow (forces recompile).
3. Close the VI and mass compile it.
4. Keep the VI closed and build the application from scratch (do not use a script).
5. Ensure that all VIs called dynamically are included as support files before building.
Please let me know if you have any questions,
Matt
Keep up to date on the latest PXI news at twitter.com/pxi

Error 7 goopsup - source does not exist

The test sequence works fine on the development machine, but I get the error, mentioned above, when I try to assemble the test sequence VIs for run time distribution.

Shannon,
It was pretty hard to locate the vi that had caused the problem because the error message did not contain any information that could help, such as step or vi name. When I narrowed the problem to a particular test sequence I saved it into a separate sequence file by copy/paste the sequence. Then I opened the VI from the new sequence file by Edit code and saved the vi because it showed that it was changed.
I tried to assemble the VI of the new sequence and I did not get any errors: the problem disappeared. Now I can assemble the VIs of the original test sequence.
I think the problem was caused by a bad subVI path that was fixed when the VI was opened, then saved.
To summarize, I would say the following: the major problem was to understa
nd and locate the problem.
An appropriate error message with the step and vi names could help to fix it sooner.
Peter

LV 8.5.1 AppBuilder error source does not exist

Hi,
I have a rather strange problem:
Every time I try to to build a VI that was converted from LV 7.1.1 to LV 8.5.1 I get an error that the source does not exist,
although the VI is there and the Preview-build does not throw an error :-/
When trying to build a VI created with LV 8.5.1 the build succeeds of course.
Does anybody have faced similar problems?
The VI and the project should be attached...
thx a lot,
Leo
Attachments:
SourceNotExisting4.zip ‏5 KB
SourceNotExisting5.zip ‏5 KB

Hi Johannes,
I have already converted and saved the VI to LV8.5.1.
Anyway, here are the steps to reproduce the problem:
1. Open the LV7.1.1-VI using LV8.5.1
2. Save it with LV 8.5.1
3. Create a new project containing the VI and having it as startup VI in an Application
4. Trying to build the application --> leads to the "source does not exist" error
Attached is the source VI (vers. 7.1.1) causing the problem.
thanks in advance,
Leo
Attachments:
Check_Pfad.vi ‏44 KB

Compiling a vi with link to an external non NI dll = error 7 "source does not exist""

I'm trying to compile a vi using Application Builder. The vi contains a number of links to drdaq32.dll (a dll to give access to Picotech�s DrDAQ data aquisitiion unit. This is connected via the parallel port and comes with a BNC connector and a high impedance input suitable for pH probes). Communication with the dll is via code interface nodes).
System:
LabVIEW v. 6i
Windows NT4
DrDAQ and DrDAQ.dll via parallel port (lpt 1) www.picotech.com
Code interface node calls to the dll use a standard (WINAPI) calling convention and �run in UI thread�
When I try to build, I get the error
"Error 7 occured at ......drdaq32.dll - source does not exist"
The source does exist. I hav
e got the same error with the dll in the same directory as my vi and in a sub directory data.
Why does Application builder refuse to see this file ??

I don't believe that this is the case.
Application builder is really very specific about what files are available and in what state. Though it is not really documented anywhere to my knowledge, the proper steps to building an application are as follows:
Before doing this, LabVIEW should be closed, and all other VIs out of memory.
1. Open your top level VI.
2. Click the run button to recompile
3. Choose "Save All" from the file menu
4. Close your top level VI and ensure that all VIs are saved properly.
5. Quit LabVIEW
6. Open LabVIEW - DO NOT open any of your VIs. Open LabVIEW from labview.exe via the start menu or other shortcut!
7. Open a new VI.
8. Open the application builder (tip, I went into the projects folder and
pulled a shortcut of the app builder out and onto my start menu, this opens the app builder fresh after LabVIEW has been exited.
9. Proceed with your build as normal.
The problem is that LabVIEW retains VIs in memory, even after they are all closed. If there is anything incomplete about these VIs, this will affect the build process. Unsaved VIs do not show up as being valid files (or something like that) to the app builder, thus if you didn't save even one single VI and try to build the application, you will get an error 7.
Step 1 is specific to your case, as recompiling ensures that all external connections are properly made.
If you still have the problem, post here and let us know.

Compiling a vi with link to dll = error 7 "source does not exist"

I'm trying to compile a vi using Application Builder. The vi contains a link to imaq.dll (a part of the NI vision pack).
When I try to build, I get the error
"Error 7 occured at Imaq.dll - source does not exist"
But the source does exist, and it is not hidden, read-only or blocked by security policies.
Why does Application builder refuse to see this file ??
I tried copying the file to the base dir of the vi, and added it to the build from there => same problem.
System:
LabView v. 6i
Imaq v. 2.5
Windows NT4

Hi Angelo,
If the vi is working properly under LV, then you can try to register the IMAQ.DLL
Execute the following command:
REGSVR32 "the complete path of IMAQ.DLL"
You should get a message that it has been registered; then try again.
Good luck,
Alberto

ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: Oracle Text error: DRG-10700: preference does not exist: global_lexer ORA-06512: at "CTXSYS.DRUE", line 160 ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

database version 11.2.0.4
rac two node
CREATE INDEX MAXIMO.ACTCI_NDX3 ON MAXIMO.ACTCI
(DESCRIPTION)
INDEXTYPE IS CTXSYS.CONTEXT
PARAMETERS('lexer global_lexer language column LANGCODE')
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366

Like the error message says, you don't have a global_lexer. So, you need to create a global_lexer and that lexer must have at least a default sub_lexer, then you can use that global_lexer in your index parameters. Please see the demonstration below, including reproduction of the error and solution.
SCOTT@orcl12c> -- reproduction of problem:
SCOTT@orcl12c> CREATE TABLE actci
2    (description VARCHAR2(60),
3      langcode     VARCHAR2(30))
4 /
Table created.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: global_lexer
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
SCOTT@orcl12c> -- solution:
SCOTT@orcl12c> DROP INDEX actci_ndx3
2 /
Index dropped.
SCOTT@orcl12c> BEGIN
2    CTX_DDL.CREATE_PREFERENCE ('global_lexer', 'multi_lexer');
3    CTX_DDL.CREATE_PREFERENCE ('english_lexer', 'basic_lexer');
4    CTX_DDL.ADD_SUB_LEXER ('global_lexer', 'default', 'english_lexer');
5 END;
6 /
PL/SQL procedure successfully completed.
SCOTT@orcl12c> CREATE INDEX ACTCI_NDX3 ON ACTCI (DESCRIPTION)
2 INDEXTYPE IS CTXSYS.CONTEXT
3 PARAMETERS('lexer global_lexer language column LANGCODE')
4 /
Index created.

RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAI

Hi All,
I am getting the error "RFC destination R/3 Source does not exist., error key: RFC_ERROR_SYSTEM_FAILURE" when planning sequence (IP) is executed. Can some one help me please asap.
Regards
Kiran

Hi,
Please go to sm59 and check if the RFC connection exists for this source system. If its there, please double click on it and on next screen, go to Menu bar and click on Test-> Connection and then test -> authorisation.
If you get any error, thats the reason. If you dont find the RFC at all, thats the reason why you got error.
You may also check WE20 for partner profile, whether it exists or not.

Error installation - Payload path does not exist and no media record specified.

Hi all,
When I tried to install the photosohop CS5, the below errors keep prompting out. Can anyone help me solve these errors! Thanks!
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 70 error(s), 58 warning(s)
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
ERROR: DS011: Payload path does not exist and no media record specified.
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
                Family: Photoshop
                ProductName: Adobe Photoshop CS5 Core_x64
                This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 Dolby WRAPPER X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {A334FDED-DCCA-481E-B226-F902CCC419D2} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 PCI WRAPPER X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Player for Embedding x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: Shared Technology
                ProductName: Photoshop Camera Raw (64 bit)
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobeCMaps x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe Linguistics CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobePDFL x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: AdobeTypeSupport x64 CS5
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
ERROR: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has required dependency on:
                Family: CoreTech
                ProductName: Adobe WinSoft Linguistics Plugin CS5 x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {CFC9F871-7C40-40B6-BE4A-B98A5B309716} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
WARNING: DW025: The payload with AdobeCode: {E8815668-95B0-443D-AC92-2BFD7DD8F16A} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
ERROR: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has required dependency on:
                Family: InDesign
                ProductName: Adobe InDesign CS5 Icon Handler x64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this dependency from list. Product may function improperly.
WARNING: DW025: The payload with AdobeCode: {F9766AC1-1461-1033-B862-DF8FE1C033BE} has recommended dependency on:
                Family: Adobe Web Suite CS5
                ProductName: Adobe Media Encoder CS5 X64
                MinVersion: 0.0.0.0
                This dependency is not satisfied, because this payload is x64 and is not supported on this machine.
                Removing this payload from the dependency list.
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - SiteCatalyst NetAverages: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Creative Suite 5 Master Collection: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Adobe Player for Embedding: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - AdobeHelp: Install failed
ERROR: DW050: - Camera Profiles Installer: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Adobe BrowserLab CS Live: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - CSXS Story Extension: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe Illustrator CS5: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - HIL Help Search: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Adobe Illustrator CS5_AdobeIllustrator15en_GBLanguagePack: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failed

Hi,
I have followed the instructions and download the products, but there is still error.
I have downloaded the one that is circled in red. is that compatible with my com?
And these are the errors:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 45 error(s), 41 warning(s)
WARNING: DW024: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
          Family: Photoshop
          ProductName: Adobe Photoshop CS5 Core_x64
          This parent relationship is not satisfied, because this payload is not present in this session.
----------- Payload: {92D58719-BBC1-4CC3-A08B-56C9E884CC2C} Microsoft_VC80_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: Install MSI payload failed with error: 1612 - The installation source for this product is not available. Verify that the source exists and that you can access it.
MSI Error message:
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding 3.1.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
----------- Payload: {15FEDA5F-141C-4127-8D7E-B962D1742728} Adobe Photoshop CS5 12.0.0.0 -----------
WARNING: DW036: Payload cannot be installed due to dependent operation failure
WARNING: DW036: Payload cannot be installed due to dependent operation failure
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS5: Install failed
ERROR: DW050: - Microsoft_VC90_ATL_x86: Install failed
ERROR: DW050: - Adobe Media Player: Install failed
ERROR: DW050: - Microsoft_VC90_CRT_x86: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Support: Install failed
ERROR: DW050: - Adobe Bridge CS5: Install failed
ERROR: DW050: - Microsoft_VC80_ATL_x86: Install failed
ERROR: DW050: - DeviceCentral_DeviceCentral3LP-en_GB: Install failed
ERROR: DW050: - Adobe XMP Panels CS5: Install failed
ERROR: DW050: - Photoshop Camera Raw: Install failed
ERROR: DW050: - AdobeColorCommonSetCMYK: Install failed
ERROR: DW050: - Adobe Mini Bridge CS5: Install failed
ERROR: DW050: - AdobeColorJA CS5: Install failed
ERROR: DW050: - Adobe ReviewPanel CS5: Install failed
ERROR: DW050: - Microsoft_VC90_MFC_x86: Install failed
ERROR: DW050: - Suite Shared Configuration CS5: Install failed
ERROR: DW050: - Adobe Linguistics CS5: Install failed
ERROR: DW050: - PDF Settings CS5: Install failed
ERROR: DW050: - DeviceCentral: Failed due to Language Pack installation failure
ERROR: DW050: - AdobeTypeSupport CS5: Install failed
ERROR: DW050: - AdobeColorVideoProfilesCS CS5: Install failed
ERROR: DW050: - AdobeColorCommonSetRGB: Install failed
ERROR: DW050: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS5 International English Language Pack_AdobePhotoshop12-en_GB: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS5: Install failed
ERROR: DW050: - AdobeOutputModule: Install failed
ERROR: DW050: - Microsoft_VC80_CRT_x86: Install failed
ERROR: DW050: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: DW050: - AdobeColorEU CS5: Install failed
ERROR: DW050: - AdobePDFL CS5: Install failed
ERROR: DW050: - AdobeCMaps CS5: Install failed
ERROR: DW050: - AdobeColorNA CS5: Install failed
ERROR: DW050: - Required Common Fonts Installation: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
ERROR: DW050: - Microsoft_VC80_MFC_x86: Install failed
ERROR: DW050: - AdobeColorPhotoshop CS5: Install failed
ERROR: DW050: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: DW050: - Recommended Common Fonts Installation: Install failed
ERROR: DW050: - Adobe Extension Manager CS5: Install failed
ERROR: DW050: - AdobeJRE: Install failed
ERROR: DW050: - Adobe ExtendScript Toolkit CS5: Install failed
ERROR: DW050: - Adobe AIR: Install failed
Thanks.

Data source does not exist

Dear all,
am extracting the data from Vistex datasource,IRM/LIS_RM_IPCRASP IP CR Agreement Conditions
after activating in RSA5 i can able to see in RSA6
but while activating the data source after the extract structure has successfully generated,
the system showing data source does not exist
plz help me

hi,
when i click the maintain button save button will appear,
but in my case this save button not highlighting...
when i check in ST22 the system proposed error mesage is table illegal statement,
i found this error in many forums but its not related to datasource actvation,
plz anyone giv me solution as soon as possible...
regards
Edited by: gadhatharan thirunavukkarasu on Oct 15, 2011 7:57 AM

Oracle Text Index Error - DRG-10700: preference does not exist: CTXSYS.DEFA

Hi we are having a Oracle 11g db.And we have installed CTX SYS package and provided the grants to the required schema.
But while creating the oracle text index, following error is thrown:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: CTXSYS.DEFAULT_LEXER
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 365
Following grnats are given :
GRANT EXECUTE ON CTXSYS.CTX_DDL TO <schema_name>;
GRANT APPOWN TO <schema_name>;
GRANT CTXAPP TO <schema_name>;
I have verifyed the ctxsys.CTX_PREFERENCES view which is having an entry as :
SELECT PRE_OWNER, PRE_NAME
FROM CTXSYS.CTX_PREFERENCES
WHERE PRE_NAME = 'DEFAULT_LEXER';
The Result is :
PRE_OWNER     PRE_NAME
SYS     DEFAULT_LEXER
Can you please assist if there is a way to update the permission on this DEFAULT_LEXER preference to set the PRE_OWNER as CTXSYS ?
Thanks

That's odd. If I run the same query I see:
SQL> SELECT PRE_OWNER, PRE_NAME
2 FROM CTXSYS.CTX_PREFERENCES
3 WHERE PRE_NAME = 'DEFAULT_LEXER';
PRE_OWNER                      PRE_NAME
CTXSYS                         DEFAULT_LEXERAre all your defaults like thsi? What do you see if you run
select pre_owner, pre_name from ctxsys.ctx_preferences where pre_name like 'DEFAULT%';
It would be easy enough to update the underlying table DR$PREFERENCES to fix the owner, but who knows what else might be wrong.
Has this database been updated from a 9i installation by any chance?

Source Does not exists

Hi Friends!
Please, I need your help with this issue!!
I generate 'Export Datasource' in development server.
When I replicate them in Testing server, I replicate these as RSDS, and NOT as 3.x datasources (yes, was not a good idea)
Now in testing server, I can see the datasource, but when I try to 'access to 'Display' in the context menu, give me the error msg:
"The DataSource 8CRN_PPP (QBICLN00) does not exist"
The rules (RSDS from datasource to infocube), are inactive too, and when I try to display or activate this, give me the error msg:
"Source does not exists"
How can I solve this?
PLEASE, I NEED YOUR HELP!!
Edited by: SSap on Aug 14, 2009 2:12 PM

Hi,
Seems that your export datasource is having the problem. 1st check it the activate mode of your export datasource in dev n transport to testing.
whiloe transporting the dataflow yiou need to transport your export data source also. i hope you missed this object in your transport request.
Thanks
Aravinda

Build Error : The name "LocalizedStrings" does not exist in the namespace

I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
Alfahisham

This is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >

<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham

Error: The preference path does not exist

Subject:
Error: The preference path does not exist:
Oracle.Portal.Page(WWC-51000)]
I can not resolve this error.
Have you already experienced this error?
I'm sending more information below.
Regards, Dime
DETAILS:
========
ORACLE Product: iAS 9i EE, v1.0.2
Platform: RedHat Linox 6.2, kernel 2.2.18
HW Platform:
IBM Intellistation 6889, Intel P2 350MHz, 384MB
Problem:
After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
appears when we try to access the URL http://servername:port/pls/portal30:
Error: The preference path does not exist:
Oracle.Portal.Page (WWC-51000)
About the Attachments:
- init.ora.original (the original init.ora file)
- init.ora.try1 (the file modified as described in the configuration guide)
- init.ora.try2 (according suggestions in the discussion group on
the ORACLE Metal Partners Site)
- install.log (install.log generated with init.ora.try2)
Regards,
Dimitar Indovski,
GORD Systems
ATTACHMENT-1 (init.ora.original)
db_name=DEFAULT
db_files= 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
ATTACHMENT-2 (init.ora.try1)
db_name=DEFAULT
db_files = 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
max_enabled_roles = 25
open_cursors = 50
compatible = 8.1.0
java_pool_size = 20
ATTACHMENT-3 (init.ora.try2)
db_name=DEFAULT
db_file_multiblock_read_count = 16
db_block_buffers = 550
shared_pool_size = 31457280
log_checkpoint_interval = 10000
processes = 100
parallel_max_servers = 5
log_buffer = 32768
max_dump_file_size = 10240
global_names = TRUE
control_files = (ora_control1, ora_control2)
open_cursors = 300
large_pool_size = 45000000
java_pool_size = 32768000
db_block_size = 8192
ATTACHMENT-4 (install.log.gz)
-----------------------------

Dennis
A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
The Configuration Assistant determines the shared pool size from the view v$parameter,
which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
null

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Error 7 occurred at source does not exist

Similar Messages

Maybe you are looking for