Error 7 occurred at Volume info....
I get the following error
"Error 7 occurred at Volume info in Win Install Copy Redistribution Files.vi->Win Install Create.vi->Dist Call Create Installer.vi->Build Application.vi"
building TestStand LABVIEW RunTime Server application with "create installer" option checked.
Has anyone an idea about this problem ? Thanks
There is a Knowledge Base on our website that addresses this problem:
Knowledge Base 1UA7EEAT Error When "Create Installer" Is Enabled
If this does not help your problem, please respond with what versions of LabVIEW, LabVIEW Application Builder, and TestStand you are using. Also, are you using the default build scripts for the TestStand LabVIEW RunTime Server? Have you been able to successfully use the Application Builder to create an installer before?
Shannon R.
Applications Engineer
National Instruments
Similar Messages
-
An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...
urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work. -
Hi all,
I am on a field campaign with my Labview-controlled instrument. I wanted to make a small change to the code and build it again for uploading to a cFP-2020 Fieldpoint but the application builder stopped with the following error message:
Error 7 occurred at ABAPI Dist Report Read Link Info Error.vi -> ABAPI Dist Cmp Settings to Disk Hier.vi -> ABAPI Get Settings From File2.vi -> ABAPI Get Settings From File.vi -> RTBEP_Invoke_Build_Engine.vi -> RTBUIP_Build_Invoke.vi -> RTBUIP_Build_Invoke.vi.ProxyCaller
This is another computer than the one I used in the lab previously so might have forgotten to install something. I just copied the whole application folder with project file and subfolders
to the Laptop I am using now. Labview version should be the same though (8.20).
Any suggestions?
OlafHello Olaf,
This error is usually found when a subVI or a support file (DLL, custom control, etc)
isn't able to be found by the application builder. Possible reasons
for this could include subVIs no longer located in their original
paths and in need to be relinked, a DLL that isn't included in the build,
and many other possibilities.
You wrote that you copied the project from another PC, so it is very possible that some file went missing. Are all VIs in your project executable?
You could try to mass compile all the VIs in your project and see if that helps.
Regards,
Johannes
AE, NI Germany -
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.) -
What does 0xc00000e9 come up on my laptop? info error had occured i/o
what does 0xc00000e9 come up on my laptop? info error had occured i/o? I cant get into the start up page. Why didnt my pc come with restore discs?
what does 0xc00000e9 come up on my laptop? info error had occured i/o
-
Get Volume Info.vi returns error 7 when trying to get disk information on cRIO-9025
Hi,
I'm using a cRIO-9025 controller and wish to get the disk volume information of drive C: using the Get Volume Info function in the file I/O palette. When I run the function with the path as "C:\", the function returns an error 7 indicating that the path is incorrect.
I have used this function prior to this with cRIO but unfortunately I do not have any older devices with me to verify this now. I'm using LabVIEW 2009 SP1.
Many thanks!
Cheers!
Sankah2k
Solved!
Go to Solution.I'm not sure whether c:\ is a valid path on CRIO,
the following code should get your paths:
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
getvolumes.png 19 KB -
HT3415 When im installing the bundle package, it says an unknown error has occurred. What do i do?
When im installing the iLife bundle package, it says an unknown error has occurred. What do i do?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
An error has occured attempting to mount a disk image "5" error #5
for quite some time now, i have not been able to load programs. it seems to have started after i did a firmware update that was meant for a OS 10.5 system and mine is OS 10.4.11. ever since then, every time i would click on "Software Update", nothing would happen, if i were to upgrade to itunes to 8.0 whatever, nothing happens. if i were to try to mount with stuffit expander i would get the following error: an error has occured attempting to mount a disk image "5", error #5. it is getting very frustrating.
any help will be appreciated.Hi Watsmaster, and a warm welcome to the forums!
If you haven't done any Disk or OS maintenance, then I'm thinking corrupt HDD or possibly some Hardware problem.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes. -
Error 7 occurred at open vi reference in New Report.VI
Hello!
I use the report generation toolkit on LabView 7.0 to create a report in Excel. The program works fine until I make an executable version. I the get the error:
Error 7 occurred at open vi reference in New Report.VI
I use the New Report.VI, Bring Excel to front.VI and Save Report To File.vi
Can you pleace help me!!!Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com -
Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.
I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026ZOK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money. -
SQL error 3113 occurred when executing EXEC SQL.
Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors DBIF_DSQL2_SQL_ERROR
Occurred on 08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:, , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500 mara.ntgew,
009510 mara.gewei,
009520 mara.volum,
009530 mara.voleh,
009540 mara.mstae,
009550 mara.mstde,
009560 mara.prdha,
009570 marc.matnr,
009580 marc.werks,
009590 marc.mmsta,
009600 marc.mmstd
009610 into :w_ops-groes,
009620 :w_ops-brgew,
009630 :w_ops-ntgew,
009640 :w_ops-gewei,
009650 :w_ops-volum,
009660 :w_ops-voleh,
009670 :w_ops-mstae,
009680 :w_ops-mstde,
009690 :w_ops-prdha,
009700 :w_ops-matnr,
009710 :w_ops-werks,
009720 :w_ops-mmsta,
009730 :w_ops-mmstd
009740 from sapr3.mara, sapr3.marc
009750 where sapr3.mara.mandt = sapr3.marc.mandt
009760 and sapr3.mara.matnr = sapr3.marc.matnr
009770 and sapr3.mara.mandt = :p_mandt
009780 and sapr3.mara.matnr = :w_ebs-matnr
009790 and sapr3.marc.werks = :p_owerks
> ENDEXEC.
009810 endform. " extract_general_data
009820 *&
009830 *& Form append_i_ops
009840 *&
009850 * Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880 append w_ops to i_ops.
009890 endform. " append_i_ops
009900 *&
009910 *& Form extract_material_description
009920 *&
009930 * Extracts a Material Description from the remote database an
009940 * modifies the current record in I_OPS.
009950 *
009960 * >P_SPRAS Language Key
009970 *
009980 form extract_material_description using p_spras.
009990 EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 18 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
2
0
W_OPS-GROES
22222222222222222222222222222222
00000000000000000000000000000000
W_OPS-BRGEW #######
0000000
000000C
W_OPS-NTGEW #######
0000000
000000C
regards,
krishnaiah.Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod -
A serious error has occurred or how the 7.1 update ruined my life.
Ever since the 7.1 update to Premiere, I've had nothing but problems. The desktop app fails to update for every update, and appears to think it's out of date when it's not and then the icon in the menu bar will be grayed out until I reboot 3-4 times. The "workaround for that seems to be to force quit and uninstall the "previous" version and then download the "new" version from the creative cloud web portal. This wouldn't be that large of an issue, but it happens almost every other day.
Then once I can actually open Premiere, the real fun with errors begins. I have received the "A Serious Error has occurred" screen on 30-40 (not exagerating) delightful occasions in the past couple of weeks, with no real details of what is actually wrong. It usually occurs while trying to fix an issue where my multi-clips aren't showing the audio waveforms in the sequence, but it has happened plenty of other mysterious ways. This is even more complicated, because it's happening on multiple systems and one of them isn't even using the 7.1 update and another is offsite and using different hardware. The same annoying error occurs across them all.
Another super cool "feature" is that Mercury Playback Engine capabilities come and go as they please. Sometimes they work for Premiere or Media Encoder or After Effects, but sometimes they just pick one for that given day and don't let the other apps playback. All of the systems GPU were working just fine in 7.0.1, but now wtf Adobe?
My system specs are varied, but the general idea is this:
Mac Pro systems (4,1-5,1) 2.3GHz - 2.93GHz
16-24GB RAM
Nvidia QuadroFX 4800, Nvidia QuadroFX 4000, Nvidia GeForce 9800
OS X 10.7.4 and 10.7.5
A few of the systems have AJA Kona 3 and Kona 3G
Most of the media is being accessed across 10gigE to a ProMax Platform, and the project files are local on SSD's.
I have the bug report from Apple, so if that helps let me know so I can get that info to someone who cares.Hi Kevin,
I'm still planning on attempting the 10.8.5 install on one of the affected systems. In the process, I have uncovered a new issue related to the CUDA acceleration not being there at all on a system that used to have it. That particular Mac Pro system only has a GeForce GT120, but the point is that in CS6 and CC, the CUDA was working until this latest update. The other systems have QuadroFX 4000 and 4800 cards, so those seem to be getting CUDA playback, however it is intermittent.
As for the OS X 10.7.4 not allowing me to install 7.1... That is correct. The Creative Cloud Desktop app was failing updating itself (as it still does on every "update") quite a bit, I don't remember any specific messages, but I did see somewhere along the process that I wasn't able to install the Premiere 7.1 update with my 10.7.4. One of the systems here is have a ton of issues with AE, but that's a whole new thread I think. I will attach some of those errors for kicks, but all of these problems occured with the introduction of the virus that is Creative Cloud into our working environment.
I am working with a wide variety of media: R3D, 5D, F55 4K XAVC, Canon C-300, XDCAM EX, FS-100, ProRes. The projects that I've been having the most issues with lately has the Canon C-300 .MXF media mixed with 5D h.264 as a 2 camera multi-cam set up. The other project that was giving me a lot of trouble right when I installed the Premiere 7.1 update was R3D and F55 4K XAVC. Both issues were the "A Serious Error has occurred. Premiere will try and save your project" vague warning. I usually only lost work since the last Autosave 20 minute interval, but sometimes that is a lot of work and when it happens 10 times in one day, that is unacceptable.
Here are some answers to some more of those questions:
What other software are you running?
These are all possible conflicting software (IMO) that are installed:
Final Cut Studio 3
Avid Symphony 6.0.3
Cinema 4D R14
RED CineX
Davinci Resolve
Nuke7
Adobe CS5.5 and CS6 are still installed
Do you have any third-party effects or codecs installed?
Yes. Trapcode Suite, Primatte, lots of scripts in After Effects. Lots of codecs installed from Sony, Avid, RED, Canon, etc.
I think I've answered most of the other questions in this thread, but hopefully that helps. I will update when I'm able to get 10.8.5 installed. I suppose a clean install of 10.7.5 perhaps might have the same chances of fixing this as well.
Here is the Premiere Error:
Here are a series of AE errors, that might need their own thread: -
Yesterday,I downloaded an update for Lightroom 5. Now when I try to import, I receive the following message: "An internal error has occurred: not enough memory". The message comes up right after I click import, before I choose a file to upload.Here is the information I can think of that might be needed to answer this question:
- I always download my photos onto an external hard drive.It is about 10 % full.
- It says I have Lightroom 5.6 64 bit
- I am working from a newer laptop (Windows). The internal drive on the laptop has 289 gb and I am using 61 gb total memory.
- I have edited 2794 photos in Lightroom and it is all in one catalog.
- I did not have this problem until I made the update. I did have my first "bug" earlier this week when one of my photos had a line show up through the middle of it when I exported it. I was able to export it a second time without the line.
If there is more info. needed, let me know. I do photography as a hobby and know enough about Lightroom to edit out blemishes and adjust color balance, but not too much more, so forgive my ignorance if this is an obvious fix.
Sincerely,
AdrianneNot Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?
-
This is a long description of a series of problems with my new Palm Pre. You may wish to search the text to find your specific issue(s). There is no solution in my post. Look for possible answers in the responses to come.
I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone worked great. Last night I plugged in the phone and updated the OS. After completion, I selected "Done" and went to bed.
- First Series of Issues: "Phone Offline", will not charge battery -
In upper lefthand corner of the phone there is the message "phone offline". Although the phone has been charging all night it reads "26% battery". I called the general Sprint tech support number and we tried the following things:
1) Restart phone (press and hold power button, then select "turn off". after power down, press and hold power button to power on.)
2) Reset the phone (several different ways - call tech support so that you do this correctly)
The individual at Sprint then sent me to another tech support person, presumably 2nd tier.
- Second Series of Issues: Error message "an error has occured that cannot be resolved" -
Sprint tech support person #2 also had me restart and reset the phone in a number of ways. In her words "we've tried every palm pre trick I know" and each time the phone was unresponsive. Often we received the error message "phone is offline". We did a full erase and after that the phone would no longer restart. At this point the error message came up saying "an error has occured that cannot be resolved" which referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky background with a semitransparent box over it with white text.
Sprint tech support person #2 then connected me with Palm support and the dance continued. Again we tried a whole bunch of resetting and restarting and erasing options. Palm support instructed me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. While that was happening he had me hold the "volume up" button and plug the phone into the charger. This caused a USB symbol to appear on the phone. When the file was complete I received an error message that the file couldn't run. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He then transferred me to another Palm support person who works with Mac users.
Palms tech support person #2 then informed me that I should have selected the "mac" download option on www.palm.com/rom. I verbally walked her through the whole series of webpages, telling her that it says that you need Windows (version whatever) or Mac (version whatever) but that at no time was there an option to download a different WebOS Doctor for different operating systems. After some more discussion she told me she would have to have someone call me back tomorrow.
- Third Series of Issues: phone stuck on USB symbol -
So at the moment the phone is completely useless. Not fantastic. I booted up the mac in Windows 7 and downloaded WebOS Doc and received the same error. I also ran Windows Vista virtually and received the same error. Later this afternoon I'm heading into work to try the same thing on Windows XP.
In the meantime, I got onto this forum and located a thread that provided a direct link to the necessary file:
palm.cdnetworks.net/staging/rom/webosdoctorp100ewwsprint.jar
After downloading that file, which I realized could totally be a virus, I was able to get WebOS Doc working on my computer. It required that I recharge the phone completely before beginning and now it's on the screen that says "Don't disconnect your phone" and the file is at 3% complete. Only... it's been at 3% complete for almost 30 minutes.
I am hoping that Palm will follow up with me tomorrow, but I'm leaving at 7am on a business trip and would love to have the thing working. Any suggestions are welcome, even if you can just tell me how to get the think disconnected safely before my flight tomorrow. I don't fancy getting through security with my phone wired to my laptop.
Thanks.
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.Hello and welcome to the forums;
Our phone support is open every day Monday through Sunday, although there are different hours of operation for the weekend. If after a webOS Doctor reset you are still experiencing the same problems, I would likely recommend replacement, either in a local store for your carrier or through our technical support department.
There may be additional technical support offered or suggested over the phone, this would need to be done first before a replacement could be issued.
Hope this helps,
TreoAide -
I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
print report.vi
EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett HerningOk, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File
Maybe you are looking for
-
ITunes keeps changing to the default folder location
I have no idea what's going on here, but, it's getting very frustrating. Here's the situation: I am running the latest version of iTunes (11.whatever) on Windows 7, and my default iTunes Library location is in My Music on my C:. Unfortunately, my C:
-
WAD - Export to Excel: Information from Web Item "FILTER_PANE_ITEM"
Hi all In a report header I would like to display all the restrictions (filters) that have been placed on a query. I do this by adding a FILTER_PANE_ITEM in the web application. I works fine in the IE: In the top of the report all restrictions are di
-
I just bought a new computer and I can't figure out how to transfer everything from my devices (ipad, iphone, ipod) on to my home computer into itunes?
-
Hi Guys, I know it is general question. I am new to BW. I would like to ask if anyone could give me a hint how to extract from FI assets master data to BW on daily basis. Which method I should use (if any guide is available). I would like to export a
-
I just purchased CC. The adobe app manager will not install. any suggestions?
It says, other INSTANCES of adobe app manager are currently running... ?