Error 7 Windows Error 127 message.....
After upgrading iTunes I get the above message when I try to open iTunes. Also says to try and reinstall.
Windows 8.1
I've uninstalled and reinstalled.
When I do I get the same message.
How do I fix this?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Similar Messages
-
I constantly get an error 127 message when trying to donwload Itunes.
I have tried to dowload ITunes 5 times but constantly get and error 127 message. I followed instructions from this forum on which order to remove my files in and this seemed to work and all my music files came up.I was then told I had two upgrades to install and once this was done I got the error 127 message again. I have been using Itunes on my computer for the last 6 months with no problem. Any ideas please?
Hello there, sheilahan.
The following Knowledge Base article provides a great step-by-step walkthrough for troubleshooting issues with installing iTunes. Make sure you are downloading the install file from Apple directly, as you want to be installing the latest version of the installer, not a dated one. The proper link is provided in Step 3:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
To save time - I have scoured the forums and tried many solutions including:
- reboot
- uninstall itunes, reboot, reinstall
- uninstall all apple products, go into regedit and delete apple folder, reboot, reinstall
- uninstall all apple products in the required order, reboot and reinstall
None of these have worked for me yet. Please help! And thank you for any suggestions. -
I downloaded iTunes onto my laptop and was getting an Apple Application Support error so I downloaded that and now I'm getting a Procedure Entry Point and Error 7 (Windows Error 127) messages. I have no clue how to go about fixing whatever the problem is...can anyone help me?
iTunes.exe - Entry Point Not Found
The procedure entry point
AVCFAssetCreatWithByteStreamAndOptions could not be located in the dynamic link library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
What is Error 7 (Windows error 127) relative to ITunes download?
When I attempted to update ITunes the upgrade failed to download and install properly. I received the "Error 7 (Windows error 127) message.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I downloaded the latest version of iTunes, now it will not launch. I get a Windows Error 127 message. Any suggestions?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Do I have to download Itunes again from the App Store after updating my original I can no longer use it.
Keep getting the error message Windows error 127, restore ITunes. This has not affected my IPad at all.
Hope someone can help.
thanks JeanHello Jean,
Based of what you have provided then I would say yes download iTunes from Apple’s website and also make sure that your version of Windows is up to date as well. Take a look at the article below to walk you through that plus some other steps necessary to get you back to using iTunes.
If you can't install or update iTunes for Windows
https://support.apple.com/en-us/HT201668
Regards,
-Norm G. -
I am trying to update iTunes so that I can sync my new iPhone. I get a message Error 7 (Windows Error 127). I have uninstalled all Apple software and tried to reload with no luck. I have also cleaned my computer's registry with registry cleaning software. Even tried reloading operating system disk to fix errors. Any ideas?
Hello chathamcpa,
I found an article with steps you can take when you are getting Error 7 when opening iTunes. I recommend following the steps in this article:
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm receiving an error message 7 (Windows error 127) while installing latest iTunes
While installing the latest iTunes i'm receiving a message Error 7 (Windows error 127) please reinstall iTunes.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I received message iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 127).
Now I can't open iTunes and can't find previous version to reinstall . This is on my old computer with Windows XP.
Does anyone know how to fix the problem.If the article above doesn't sort you out then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. (Similar to Apple's article but with some resources for when things go wrong). Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Cannot reinstall iTunes. Receive error message Error 7 (Window error 127)
Cannot reinstall iTunes. Receive error message, Error 7 (Windows error 127)
Have you tried working through the user tip Troubleshooting issues with iTunes for Windows updates yet? If not try that, if you get stuck ask for help...
tt2 -
Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?
Like many others I have been reading about online I am having the same error. I tried the fix listed above and simply wasted 30 minutes of my time. I scheduled a time for Apple to call and help me through this and their solution was for me to call Microsoft for some reason?!! iTunes made me upgrade then stopped working - I really don't see how this is a Microsoft problem??
Like Darren if a solution is not found quickly I will also have to sell my phone as the only way to get videos and music on my phone is through the software that you made me upgrade, broke and won't help me fix. -
I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?
See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2 -
I have successfully installed itunes 10, then get an error message that reads, itunes was not installed correctly Error 7 (Windows error 127)
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Error 2000 - The server is not compatible with this deployment client
I'm getting an error trying to deploy a composite. It works for everyone else on the team, and our configurations are the same (as far as we can tell). We've compared JDev version info. Any idea what I can try? Thank you. [12:57:48 PM] ---- Deploymen
-
How to remove passcode from ipod touch 3g if power botton is not working?
how to remove passcode from ipod touch 3g if power botton is not working?
-
Dashboard showing Error (! Error : Response from server contained an error)
Hi All, We are facing a problem while accessing the dashboard page, when user log's in and access the dashboard page. At this point the report start rendering, after sometime during the report rendering process we use to get this error on top of the
-
Hi friends, I want to throw an error message when user enters in date field.My requirement is to restrict the user to enter only first day of the future months like 01.10.2009 or 01.12.2010...........not like 02.05.2009. how to do it? Thanks.
-
E-Recruiting Recruiter Dashbord problem
Hello, when I start the Recruiter Role in EHP4, I can see the dashbord und the queries. But when I click on a posting or try to create a new one from the dashboard, it doesn't work. When I start the service ERC_A_WORKCENTER from the backend its works