Error 7 (Windows error 999)
Help
I keep getting this error message when trying to launch Itunes: Error 7 (Windows error 999). I uninstalled all Apple products and tried to re-install Itunes but it did not work. i have also tried apples suggestion of installing all the NET.frameworks but with no success? i am using windows xp (old i know)
please help
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
http://www.apple.com/itunes/
If you have 64bit Vista or Windows 7, look for the seperate download of iTunes for that further down the page.
Once installed, use the Apple Software Update under your Start Menu to fully update all Apple components.
Your content will remain on the drive in the Music > iTunes Folder, nothing is deleted.
You should be making backups of your content regularly, either through iTunes or via copying the iTunesFolder in your Music folder to a external drive.
Windows is notorious for having "other" issues that make it unstable, we as volunteers helping others can't always resolve those issues.
Similar Messages
-
encountered error r6034, runtime error, window error 1114 for itune 11.1.4 update. Same error msgs for when I tried to uninstall and reinstall as suggested.
pls advise if you have another solution to it... thxClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99512) -
Photoshop CS6 EXTENDED Install Error [WINDOWS] *error report included*
Greetz,
I uninstalled Photoshop CS5.1 ME (Middle Eastern) version from my 64bit operating system (Windows 7 Home Premium) and went on to install CS6 EXTENDED after a fresh restart (I also deleted remaining CS5 folders in "Program Files' Adobe directory"). The setup went fine. But, when it finished, it gave an error message saying that Adobe Photoshop CS6 didn't install or didn't install correctly. From there, I copied the error report/log it gave out:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF050, DW063 ... WARNING: DF029 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 6 error(s), 1 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
ERROR: DF050: ARKServiceControl::ModifyService failed while saving previous service configuration.(Seq 6)
ERROR: DF050: ARKServiceControl::ModifyService failed for service SwitchBoard. Error 2 The system cannot find the file specified.(Seq 6)
ERROR: DW063: Command ARKServiceControlCommand failed.(Seq 6)
ERROR: DF059: ARKServiceControl::StartService failed to start service SwitchBoard. Error: 3(Seq 1)
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 1 Exit Code: 3 Service Specific Exit Code: 0(Seq 1)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Mini Bridge CS6: Install failed
ERROR: DW050: - Adobe SwitchBoard 2.0: Install failed
Photoshop started fine and worked fine (only used it a bit) after the "failed" installation but, the Update option in the Help window was grayed out (trial version, just to let you know). Is that a limitation to the trial version? Or is it straight up an error?
My question is, what did the error report mean and what could be wrong with my currently installed version of PS? BTW, I didn't use Mini Bridge yet, although all of its files are present in the Program Files directory for Adobe.
Thanks in advance.Thank you for the reply. I will try the steps listed in the document you linked me to. In case any of the procedures works, I will mark your post as "Correct".
Thank you, once again. -
R6034 error & Windows error 1114
I can not load my itunes media player. I continue to get these errors?????
Hello BIGG SEAN,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
How do i correct a download error. window error 1114
my Itunes download won't run completely. I keep getting a Runtime C+ library error. HELP...
Hey debbiefromabilene,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. Let’s troubleshoot the iTunes installation by completely removing and reinstalling iTunes and all related components (it is important to remove all components in the order listed):
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Additional Information:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Error window while changing the value in SelectOneChoice.
Hi I am facing a problem on change of values in SelectOneChoice, "ERROR For input string: "N"
Below is how i am implementing SelectOneChoice:
I am creating values for SelectOneChoice in a Java class:
*SelectItem itemY=new SelectItem();*
*itemY.setLabel("Yes");*
*itemY.setValue("Y");*
*confirmation.add(itemY);*
*SelectItem itemN=new SelectItem();*
*itemN.setLabel("No");*
*itemN.setValue("N");*
*confirmation.add(itemN);*
Using this values in JSFF like this:
*<af:selectOneChoice value="#{bindings.confURLSubmitted.inputValue}"*
*label="Conference Website URL Submitted"*
*required="#{bindings.confURLSubmitted.hints.mandatory}"*
*shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"*
*binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"*
*id="confURLSubmitted"*
*unselectedLabel="Select One"*
*autoSubmit="true"*
*valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">*
*<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"*
*binding="#{backingBeanScope.EditComplianceDetails.si1}"*
*id="si1"/>*
*</af:selectOneChoice>*
And in bean method i am trying to print the selected value in SelectOneChoice:
*public void OnConfURLSubChange(ValueChangeEvent valueChangeEvent) {*
*// Add event code here...*
*System.out.println("this.confURLSubmitted.getValue() "+this.confURLSubmitted.getValue());*
Now when i try to change the value in SelectOneChoice:
I am getting an error window "ERROR For input string: "N"
Any idea y i am getting this error.
Thanks in AdvanceRemove selectOneChoice value binding and set static value and try
*<af:selectOneChoice value="XXX"*
label="Conference Website URL Submitted"
required="#{bindings.confURLSubmitted.hints.mandatory}"
shortDesc="#{bindings.confURLSubmitted.hints.tooltip}"
binding="#{backingBeanScope.EditComplianceDetails.confURLSubmitted}"
id="confURLSubmitted"
unselectedLabel="Select One"
autoSubmit="true"
valueChangeListener="#{backingBeanScope.EditComplianceDetails.OnConfURLSubChange}">
<f:selectItems value="#{pageFlowScope.generalLists.confirmation}"
binding="#{backingBeanScope.EditComplianceDetails.si1}"
id="si1"/>
</af:selectOneChoice> -
I am getting an error 7 (windows error 999) message and can't uninstall iTunes or install new versions of iTunes on my PC? Any suggestions?
Hi jschnurr,
I recommend the steps in this article, including how to completely remove iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers!
- Ari -
Get windows error 999 after installing itunes and program won't open.
I get a windows error 999 message when I try opening Itunes after a new install, what is my problem?
had to install OS X Mavericks again. after install, everything runs smoothly again. ran recovery from restart then installed mavericks over old mavericks.
-
help
I am having the same exact problem!! The worse part is i put allot of work into reorganizing my files(tunes) the way i wanted, now this error 7 (Windows Error 999) Reinstall iTunes pops up when i click to load itunes... Please Help?
-
Hi Everyone,
I m really frustrated with this issue. I am trying to install Adobe LiveCycle ES Update 1 trial version JBOSS turnkey option.
It does not work!!
The installation goes smoothly. But when I launch the config manager, there is no way I get passed the "Error[ALC-LCM-999-032], with a Failed on 'Starting service JBoss For Adobe LiveCycle ES'. Service startup failed for: JBoss for Adobe LivecycelES."
I tried pretty much anything I could find out there as potential solution to the problem. I even tried it in a brand new machine whit pretty much nothing in it: so no possible port conflict (by the way I tried starting jboss directly from the cmd line under Adobe 8.2 dir and it starts fine. i.e: Only the service is busted!!!), tried changing the local policy right and Allow Logon as a service, tried changing the account the service is running under, to no avail.
I tried installing it in machines with Win XP, SP2, JavaSDK1.5_017
Also, tried installing it in machines with Win Server03 SP2 Standard Edition x64. Same JDK. Same thing.
I have tried several machines w/ the same result
I am obviously missing something !
I personally dont care about the windows service. If there is a way to do the config manually, I m more than happy to take that route, as long as I am told what to do. THANKS>
mb/I was able to solve this issue. I put this in another thread also as I treid for hours to get this to work and no one had good explanation on forums.
I had same problem on Windows XP (32 Bit). I was installing LiveCycle ES on my desktop to do some solution evaluations. I could start the JBOSS server successfully if I did that by myself, but Adobe Configuration Manager and Java Service were failing.
The issue was the JDK I had assigned to use.
To resolve:
1. Make sure you have compliant JDK Version. To get mine to work I had to install JDK Version jdk1.5.0_17.
2. Switch the JDK that the JBOSS Java Service is pointing to. To do this, you will need to uninstall and reinstall the service.
2.A Go to your installation folder (C:\Adobe\LiveCycle8.2\jboss) and copy the file "InstallJBossService.bat" and rename it "UnInstallJBossService.bat".
2.B Change the command line to execute an uninstall by the following: "%LC8DIR%/jboss/JBossService.exe" -uninstall.
2.C Change your OS Environment Variable for JAVA_HOME to the correct JDK, for example "C:\Program Files\Java\jdk1.5.0_17".
3. Rerun the Adobe Configuration Manager C:\Adobe\LiveCycle8.2\configurationManager\bin\ConfigurationManager.bat
It should complete successfully now IF your issue was the wrong JDK like I had.
Also make sure that the Java Service has Permission to run. Check your control panel -> adimistrative tools -> Service. It will be called "JBoss for Adobe LiveCycle". Make sure it has permission to run as local user is what I did.
There are some other posts about issues similar to this using wrong JDK or 64Bit Windows or other. -
Adobe Bridge CS3 windows error
Hi,
When I open Bridge cs3 on its own after a few seconds the window banner comes up. Adobe bridge has encountered a problem and needs to close.We are sorry for any inconvenience. The same happens if I try to open bridge from within Photoshop cs3
I can still work in the programme ok and move the windows error aside, I would like to fix the problem, Tried to debug but the programme just closes.
I use windows xp pro with all the latest updates that are available.
have any others experienced this problem and how to fix it.
Thanking you in advance.Mikep500 wrote:
This is a copy of the message that comes up.
No messageto see, but you can check your Startup Scripts in Bridge preferences. Mine are like this: -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
Itunes wont open - Error 7 (windows error 127)
When downloading the lastest version of itune my computer crashed and now itunes will not open. It says itunes was not installed correctly. Please reinstall. Error 7 (windows error 127). Reinstalling intunes has not fixed the problem. Please help!
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
as of today when i plug my 7th generation ipod that i just got for christmas 2012 my pc shuts down to a blue screen with alot of writing then to black screen with alot of writing then to an all black screen then and windows error message my computer is ingood condition no malicious malware and has been clean i need help
thank ycjlet me get back with the answer with what the messages say on the blue screen and the black screen if i can read them fast enough before it shuts down i have windows 7 professional
-
When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Hi frd I am trying to run teh sendEMailwithattachemnts tutorial. I have remade it in 10.1.3.1 version. Its giving following error in domain.log file ORABPEL-05002 Message handle error. An exception occurred while attempting to process the message "co
-
Background Change Picture Feature Not Working
I have had my macbook pro for about 6 months now and my change background feature worked fine when I first got it. I could add folders of pictures and tell it change ever 5 seconds and it worked. Over time, I messed with my dock settings and backgrou
-
Is there a key for entering text on ipad mini for the schwa symbol?
Is there a key for entering text on ipad mini for the schwa symbol?
-
My ipad screen flashes when i turn it on
My Ipad screen flashes whenever i turn it on what should i do
-
my ipad 1st generation will not locate wi-fi networks. i have reset and have done router reseting, still nothing. any suggestions?