Error 72 on Win7 64bit

Hi, i try my best with english.
I set up a new sytem - win 7 on ssd. At this time i have only installed important drivers, like nvidia, mainboard, firefox and chrome. I get this Errormessage every time.
I tried hte following
- to run this .exe with Admin rights
- shut all browsers befor launching the installer (Adobe said, this is the reason for that error)
- used the safe mode of windows
- renamed this strange OOBE-Folder
Nothing worked and i really need it to get some money.
Can anyone help
Adobe, 50 Euro per Month --> Do something.

Hi,
Please refer to thread below where this issue has been addressed:
I am receiving an error code 72?
Regards,
Sheena

Similar Messages

When installing iTunes 10.5 64bit on my win7 64bit computer I get a weird error message.

This all started when one day I plugged in my iPhone 4 to my iTunes 10.4 on my PC (win7 64bit) and I got nothing. I got the connection noise and my phone started charging but it would not show up in iTunes. In My Computer, it sees that I have an iPhone plugged in but shows it as a Camera, not a phone, and I am not able to see anything inside said "camera". At this point I decided to clear everything "Apple" off of my computer and manually install iTunes 10.5. Mid download i came across this error message that I have no clue what it is telling me. After clicking "OK" it then tells me "rolling back session" and then tells me that "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services." Since getting this messag I suspected that it was an AMD (apple mobile device) issue. AMD seems to be IMPOSSIBLE to uninstall/delete from my computer... At this point I'm giving up and looking for advice/help on this issue.
Im lead to believe that it is an AMD issue because iTunes 10.4 reads my iPod Shuffle perfectly but wont read my iPhone 4 or a friends iPhone 3g.
Thanks in advance for taking the time to read this!! Any help would be greatly appreciated because I dont want to reformat

Hey donovanjj,
Thanks for the question. Let’s try to recreate your SC Info folder:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
If the above does not resolve your issue, you may want to look over the following resources:
iTunes 11 for Windows: If you have trouble burning a disc
http://support.apple.com/kb/PH12349
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thanks,
Matt M.

CS4, Win7 64bit Media Encoder Errors

On a fresh install of Win7 64bit, ASUS P6T Deluxe V2 motherboard 12GB RAM, NVIDIA GTX 260 graphic card and all updates (software/hardware), I'm having a bear of a time exporting even a bars/tone test project from CS4. Here is the sequence of events:
1)Create/edit project, export media, I get warning message that an update of Media Encoder is available (but I've already double checked that I'm running CS4 4.2.1 with multiple computer restarts). AME version I have is 4.2.0.006
2) choose export format, location, etc. (I've tried various export formats with no difference in resulting error messages)
3) dynamic link exports the file to AME...BUT....AME doesn't open
4)When I've manually opened AME beforehand, CS4 will export to the queue
5)On attempt to encode I get the message:
- Source File: C:\Users\Oren\AppData\Local\Temp\Zi8 Test_7.prproj
- Output File: E:\Choco Rehab2.f4v
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:18:29
2/6/2010 9:42:25 AM : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
6) I've looked in the folder and indeed, the source file doesn't exist...but it keeps creating this same message, regardless of what project I try to work on.
I've done a re-install (with cleaner script) TWICE already and it is really a time-killer (especially when I defrag the drive in between installs). I beseech Harm and all the other gurus to offer some sage wisdom. Thank you.

I'm the only user on the computer, and I do have full rights to the C: volume. By default, I should be the administrator, is that correct? Thanks again for your offer to help and your invaluable assistance to all Adobe users. With your help (and the upcoming Mercury engine), I hope to have a Matrox-free system eventually. I still have to use my XP-32 matrox and CS3 system until I can work out the kinks that keep me from exporting completed projects on my newly build Win7 CS4 system.
Let me know if anything stands out to you that I'm missing. I'm a bit frazzled currently.
-Oren

Application on Win7 64bit throws error -50103, but not on Win XP 32bit host

LabVIEW application newly installed on Win7 64bit host throws error -50103.
Same aplication deployed from same installation disk on Win XP 32bit host have been working for 2 years withourt problem.
I did have a problem with importing the MAX configuration from the Win XP 32bit machine to the Win 7 64bit machine.
My solution was to install all the drivers from my most recent Devaloper Suite 2012 DVD.
After that the executable did run fine, except when the variuos DAq tasks are executed for the second time in a loop it thows error -50103.
If i click ok on the erro popup, everything else works fine until in the next pass of the loop I get the same error.
Why would I get error on one host but not on the other one?
How do I fix this?
Scientia est potentia!

A common error that you can find numerous posts about with a search
http://forums.ni.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3A170&q=5...

Error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT

error -43 when try playback on win7 64bits over the network QT that recide MacPro osx 10.5 however i can play with VLC player, This happend when the QT is inside a Folder with name longer 8 chars other files has no problem with long names just the QT nfs sharing

Never mind, I already found the solution myself.
What I did wrong was:
- not copying the master image to the nbi folder
- selecting the netinstall-restore.dmg image as source to copy to my HD.
The thing is, when you create a netinstall image for 10.5, the image itself is already included in the netinstall image so you don't have to do anything else.
With the 10.4 image however, you also have to copy the master image to the NetBootSP0 directory.
In the *.nbi folder contains an netinstall-restore.dmg file. But that is only to boot you to netrestore, it's not the image itself.
Other alternative is to copy the images to another folder that you share with AFP and adjust the configuration of netrestore like described in this manual:
http://www.shellharbourd.det.nsw.edu.au/pdf/misc/osxrestoringnet.pdf
This manual was also how I figured out that I forgot to copy the image to the NetBootSP0 folder.

Hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225

hello, i've win7 64bit and can use my adobe acrobat 7.0.0.2004121400. but it is not possible to print a pdf - error 20225 at the installation of acrobat. any ideas how to solve this problem? I've tryed some instructions from internet concerning this 20225 error, but without success. thanks a lot and best regards

BS heißt "Bull___****". *lol* "Betriebssystem" heißt imemr noch "operating system". GoLive wirste wohl gar nicht zum laufen kriegen. ohnehin würde man es nicht mehr verwenden, weil es noch nicht mal CSS2 voll unterstützt geschweige denn HTML 5 und andere moderne Webstandards. Wenn überhaupt, dann findeste vielleicht noch 'ne OEM CD von Strato oder 1und1 bei eBay. Die haben das damals mit jedem neuen Hostingvertrag rausgehauen. Aber wie gesagt, es ist den Aufwand nicht wert. Illustrator sollte sich durchaus installieren lassen. Eventuell einfach nochmal die Installer im Win XP Kompatibilitätsmodus laufen lassen...
Mylenium

Runtime Error while installing NI FBus Software on Laptop with Win7/64bit

Hi,
I am not able to install NI-FBus software im my laptop(Win7-64 bit) as its giving me the below mentioned error:
Please let me know about this issue and how to resolve it.
Thanks & Regards,
Sushruth.
Solved!
Go to Solution.

Hi Martijn,
I am trying to install NI-Fbus software which contains NI-Fbus Communications Manager(4.0.1), Configurator(4.0.1) and Monitor(4.0). I was able to install it successfully on Windows XP(desktop). But when I tried installing it in Laptop(Win7-64bit) it gave a runtime error. The attached snapshot gives the error details. I tried to run it with Windows XP mode. But it failed again. I have not yet tried with the installer link you have given. For me if I get a trial version of it is also fine since I was trying to install registered version given by my company. Please let me know if you fina a solution to this problem.
Thanks & Regards,
Sushruth,
Student Intern,
KEMA, Nederlands.
Attachments:
Error_Snapshot.docx ‏33 KB

Itunes 10.5.1 Completly not working in Win7 (64bit)

This has been a total disaster update for me. I am running Win7 (64bit) with all my windows updates current. I went ahead and updated Itunes to 10.5.1.
That was a severe mistake. Itunes crashes every time I start the program. I notice that genius is running right at the start up and I manage to shut it off but it still crashes.
So far I have done the following:
Started Itunes in safe mode----Crashes
Done a complete clean install and reinstall---Crashes
Downgraded to 10.5 clean install---Crashes
Upgraded back up to 10.5.1 started back in safe mode--Crashes.
I have stopped my anti-virus during all installs and starts and it still crashes.
My system is clean of viruses.
No error messages are provided for all the crashes other than "This program has stopped working"
My frustration is awful. I really hope they get this fixed or someone can offer a solution. I am so sorry I ran that upgrade.

After a day 1/2 of frustration and tears I got Itunes 10.5.1 working properly on my Win 7 64bit Home Edition.
I concluded that the profile, lets call it blue99 was in some way corrupted. The reason is that I followed the troubleshooting steps outlined here:
http://support.apple.com/kb/ts1717
Under the heading of Create a New User Account
I went ahead and created a new profile, lets call it B99. Under this new profile, I started up Itunes and sure enough it fired right up, Itunes store came up etc with no crashes. The strange part is that when it started up, the Itunes user agreement came up. In the other profile where Itunes would crash, after I would re-install, I NEVER GOT THE USER AGREEMENT. It would just go through an install, and when it would restart, it would immediately start to crash.
So now I concluded in agreement with the suport article that it was a "user-specific problem"
With this info, I took a gamble. I did not follow the "User specific Troubleshooting" offered in the article.
Instead I followed the directions found here:
http://windows.microsoft.com/en-US/windows-vista/fix-a-corrupted-user-profile
I followed these very carefully. I copied all of my files found under C:\users\Old_Username folder, in this case that would have been the profile blue99. From there I copied the folders in there to the C:\users\New_Username folder in this case B99. The most important rule of thumb is MAKE SURE YOU HAVE FULL ADMINSTRATIVE PERMISSIONS BEFORE YOU START.
I then right clicked on the B99 folder and went to Properties and under the Security tab I gave the profile B99 full permissions. After this I went back to Control Panel and under User accounts I went and turned the B99 profile into full administrator and took the corrupted profile blue99 and switched it too Standard adminstration.
I restarted my computer and logged in under B99, started up Itunes and Yay!! Itunes is up and running. No crashes so far!! When I was running Itunes on the old profile I went ahead and turned off Genius and Home sharing. In this new profile I turned on Genius and it worked with no crashes. But I don't want to push my luck so I turned it off. Itunes has been running with no crashes. This is what worked for me, yeah its convuluted but I was desperate!! I don't even consider this a patch, so much as I cheated to get Itunes running.
If someone has a simpler way to get Itunes 10.5.01 to run, please let me know!!
Please note when I started this I had already reinstalled Itunes on the corrupted profile. I did not install Itunes again on the new profile. I just started it up.

.xlsm File use from Excel 2013 64bit/Win7 64bit to Excel 2013 32bit/Win8.1 64bit - Component Removed (not API related)

Work Environment: Excel 2013 64bit/Win7 64bit
Home Environment: Excel 2013 32bit/Win8.1 64bit (1 desktop and 1 laptop)
I am developing an an .xlsm file at work (with Lists and a single form with controls linked to a worksheet ControlSource). It works and saves all day long just fine in my work environment. I save the file to either a USB drive (or DropBox - makes no difference)
and then open the file on my home computer. I can open the file the first time with no problem and with no error messages. But then when I try to save the file Excel 2013 32bit most often tells me that it has removed a component. But it doesn't tell which
component it has removed. After that, if I close the file and try to reopen it, it won't reopen. I get a series of error message: [1] file path errors (error 75) [2] Excel has stopped working errors. [3] Excel hasn't enough memory to complete the operation,
[4] Excel will close. So I click the close button on the last error message and Excel disappears. I say disappears, because its not really gone. Mind you, its not listed in the Task Manager at this point. But, if I then click the Windows Taskbar icon to start
Excel, Excel will sometimes automatically open up with the file that I was trying to open before, already up and running, i.e. I do not select the file to open it - it just appears. Other time Excel just repeats the series of error messages noted above.
The strange part is, once this file has been corrupted, I can still take it back to my work environment, fire it up on my work computer, and it works just fine. No error messages, no saving problems.
I have totally uninstalled and reinstalled Office 2013 (HUP Click to Run) on both my home computers and it makes no difference.
I can say though, this is driving me nuts. Anyone have any suggestions or ideas?
phillfri

I think I solved the issue.
Step 1: Moved all my code from the Worksheet_Open event to the Auto_Open Macro.
Result: File would open from inside Excel but when opening by clicking on the file in Windows explorer I would get the error msg "There was a problem sending a command to the program."
Step 2: Apply FixIt 20074. Note that to get this FixIt to work in Windows 8.1 you MUST save the FixIt file to your desktop and run it from there. If you follow the instructions on the FixIt page - download and run - you will get the error msg "This Fixit
does not apply because the computer does not have the expected software (Excel.exe)."
Excel 2013 definitely seems to have some bugs when starting a macro enabled file. I have seen other comments on the internet about the Excel workbook_open event actually failing to run all the VBA commands that are put into it.
Environments:
[1] Home: Microsoft HUP Click-n-Run Office Professional 2013; Windows 8.1, 64 bit; Excel 2013, 32 bit.
[2] Work: Enterprise Microsoft Office Professional 2013; Windows 7, 64 bit; Excel 2013, 64 bit.
phillfri

Trouble with firefox.exe of Win7-64bit since last firefox update

firefox has been working fine on my laptop running win7-64bit until the last firefox update and now when i close firefox and attempt to reopen it at a later time, i get the error message that ff is still running and i have to shut it down. i go to task mgr and have to close firefox *32.exe. why am i just now having trouble with this, i wonder? thank you in advance for any and all help with this matter. it's very annoying.

See:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use

HP722c install to win7 64bit

Can't get HP722C to install on new Win7 Pro 64bit OS. I saw a long post on HP about a "bridge" but it assumed that the driver was installed and just wouldn't work. I can't even get a driver to install. The CD won't work, driver is not on Win7, and HP won't download it from their site. They tell me it's on Win7, but I have done that dance twice and it ain't there! Anybody smarter than me know how to make this 722C work on Win7 64bit? Now tell me simply and slowly, I'm over 65!
This question was solved.
View Solution.

[Please DO NOT post multiple posts on the same subject. As I composed this message I note you posted three more requests for the same information....]
There are actually three separate issues that will need to be addressed:
Most Windows 7 computers do not have parallel ports and the Deskjet 722 only supports a parallel port. There are USB-parallel converters that can be used, but many of these do not support Windows 7. Make sure the converter (if you need one) supports Windows 7. The posts tagged here have models that users have reported success with in Windows 7. The port you select will depend on the model you have, the port will typically be USB001: or USB002:.
The driver is delivered through Windows Update. Lately this has been having an issue with the update failing. To check this do the following: click Start, Devices and Printers, Add a Printer, Local Port, LPt1: (for now), Next, click on Windows Update and wait for the list to repopulate. If you get an error "Windows was unable to get a list..." then see the post here for a workaround. Once Windows Update has completed and the list is repopulated select HP Deskjet 720, Next, Next, Finish. (Do not print a test page at this point.) You can now connect the printer cable, then right click on the Deskjet 720, Printer Properties, Ports and select the proper port. [I have no way to know what the port will be for your system. Look for a USBnnn: port or check with the documentation for your converter cable.] Once this has completed and the printer shows up in the Devices and Printers folder you can continue to the next step.
Next apply the patch available here that resolves this issue of the spooler crashing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

T410 win7 - 64bit installation issue

Hi !
I am trying to install win7 - 64 bit version on a virgin HDD.
The computer boot on the DVD as expected, then when I click "install now" button, an error show up.
'no device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK'
I don't even get to the point where I can choose a custom installation.
Is it a known issue ? What kind of drivers are missing ?
The computer (T410) can run on Win7 - 64bit with my company HD.
My goal is to make my own HD so I can swap between company and personal use.
Thx for any answer.
Solved!
Go to Solution.

It is an advanced format (4k sectors) drive. If you are installing from Lenovo recovery disks, it just won't work. Lenovo says that they do not support AF drives in machines that were not delivered with them (pre-T420). If you are installing from a regular microsoft disk, you can put the required intel storage drivers on a USB thumb drive and add them at the appropriate time. You can also install if you can find a windows 7 disk that includes SP1. I am out of town working on dial-up and have a hard time looking things up, but this should point you in the right direction.

Streamlining Win7-64bit pro any tips please

Sorry if this subject has been posted before but I cannot seem to fined the subject. I am moving from XP to Win7 to would like to tweak windows for best performence when useing CS5 I also running some older 32bit software which i would like to use . I know XP but Win7 is new to me.
thanks

Lots of Win7 reading
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Virtual XP http://www.microsoft.com/windows/virtual-pc/
More on Virtual XP http://blogs.zdnet.com/microsoft/?p=5607&tag=col1;post-5607
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346?tstart=0
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916?tstart=0
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640?tstart=0
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255?tstart=0
CS5 Install Error http://forums.adobe.com/thread/629281?tstart=0
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842?tstart=0
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435?tstart=0
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html

Since automatic update to safari 5.1 it doesnt open any websites anymore. i'm using win7 64bit as operating system. how could i get safari 5.1 to work correctly or downgrade it to earlier version?

i guess i said all in the topic:
had an automatic update to safari 5.1, since than it doesn't work anymore, can't open any website.
i'm using win7 64bit as OS.
does someone know how to get safari 5.1 to work at win7/64bit
or how can i downgrade to safari 5.0 again (if i try to download it somewhere, it always switches automatically to safari 5.1)
many thanks for ur help,
rainer neumüller

isn't there any apple admin who knows about this problem and knows how to solve it? i found several post in other fori who had the same problem, none was answered sufficiantly.
plz give me a chance to use safari again!

When printing photos at my hp 1514n the colors are odd + not suitable. using win7 64bit +lat. driver

Hi, I' using a hp 1514n for printing photos. It's attached to my Win7 64bit computer. But the colors are not suitable. Printing is in high quality but the coloras are wrong (i.e. instead of a bule sky I get it turquois).
all patches installaed and also the lastest drivers. What else can I do?
The files are ok, because I get the right colors when printign the files at another hp color laser jet with win7 (32 bit)
Where can I get a suitable icc file?

I'd use the GutenPrint drivers. They're usually better than the drivers that HP ships, anyway, and the latest version of GutenPrint will work with Leopard while the HP drivers for a printer that old will not. The drivers at <http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs> also explicitly support the DJ960C. Those drivers are usually written by HP employees, are often superior to the drivers HP uses, and, like the GutenPrint drivers, are free.

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

My iTunes will no longer play videos/music videos (bought from the iTunes store) since the last update? (Win7 64bit)

Guys I have the same problem.
Since I installed iTunes 10.5 I can't play any of my music videos downloaded from the iTunes store.
I can play music ok but no videos. I just click on the videos and nothing happens!!
Help..... is there a remedy???

Error 72 on Win7 64bit

Similar Messages

Maybe you are looking for