Error 734: The PPP link control protocol was terminated.
I am using windows 8.1 and www.astrill.com VPN. before it was working, but now its not working. I tried to connect VPN for last 4 days.
I followed https://social.technet.microsoft.com/Forums/windows/en-US/303c7c61-074f-4588-ba92-006295ef7cc8/error-734-the-ppp-link-control-protocol-was-terminated?forum=w8itpronetworking but it doesn't help me.
I guess I couldn't login astrill vpn. because my OS doesn't ask me login username password. only asking about my computer's username password. Before it was working same my laptop and OS. I think after windows update it doesn't work.
Check the properties under your Astrill VPN profile, under security tav click "Allow unsecured password" in the "Validate my identity as follows" box, and then click "OK
or try to delete and re-create the profile
http://wiki.astrill.com/index.php/Astrill_Setup_Manual:How_to_configure_PPTP_with_Windows_built-in_client_on_Windows_8
try to update MS-CHAP (authentication protocol) support on the VPN server by download the latest version
https://www.astrill.com/download.php
You can also try to use Astrill VPN Dialer 1.1 to connect
you can also try do system restore (using restore point) back to condition when this VPN working fine
contact Astrill as VPN manufactured for better investigation
Tips:
Hongkong server 1 or 2 and Los Angles mostly working
Mostly issue will be solved by reinstall Astrill
Update your Wlan and LAN card to isolate driver issue (if any), check at your PC manufactured site
Similar Messages
-
Getting an error in the "Partner Link" when specifying an https-base wsdl
Hi friends,
this is Hari. I'm getting an error in the "Create Partner Link" dialogue when specifying an https-based wsdl url. The non-ssl wsdl url works fine, but I need it to work for ssl (https). The specific errror reads:
Error:Failed to read wsdl file at "https://serverstuff/webservice.cfc?wsdl", caused by: javax.net.ssl.SSLHandshakeException. :sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
i need to invoke secure service(https).what should i do for taht?
Regards,
harihttp://orasoa.blogspot.com/2007/09/compile-error-bpel-against-ssl.html
marc -
Error in the resource link under attestation
Hi, our client started using the attestation process.
We had no errors for creating the process, but we get the error below when clicking the resource link under attestation->dashboard.
The error does not happen for all users.
DEBUG,23 Oct 2009 19:01:51,695,[XELLERATE.DATABASE], select usr_key from usr where USR_LOGIN=? and USR_STATUS!='Deleted'
DEBUG,23 Oct 2009 19:01:51,697,[XELLERATE.DATABASE],select oiu_key, upa_key from atd where atd_key=?
DEBUG,23 Oct 2009 19:01:51,699,[XELLERATE.DATABASE],select snapshot from upa where upa_key = 1739
ERROR,23 Oct 2009 19:01:51,702,[XELLERATE.ATTESTATION],Class/Method: ManageAttestationTaskAction/prepareFormWithUDFormData encounter some problems: Popup process form data
java.lang.Exception
at com.thortech.xl.webclient.actions.ManageAttestationTaskAction.prepareFormWithUDFormData(Unknown Source)
at sun.reflect.GeneratedMethodAccessor685.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:280)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcActionBase.execute(Unknown Source)
at com.thortech.xl.webclient.actions.tcAction.execute(Unknown Source)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.thortech.xl.webclient.security.SecurityFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
OIM: Version 9.1.0.1
Thanks,Hi Dharma,
I opened an SR with Oracle and I have is the solution, I'm still doing tests, but seems to resolve.
Run the GenerateSnapshot.sh/GenerateSnapshot.bat using following parameter.
GenerateSnapshot.bat -inputFile E:\OIM9101\XLServer\xellerate\bin\a.txt -missingSnapshots -username xelsysadm -password xelsysadm -numOfThreads 2
Where E:\OIM9101\XLServer\xellerate\bin\a.txt contain the usr_key of all users for which you want to created latest snapshot.
Run the "Issue Audit Messages Task" schedule task
Make sure there is no entry exist in aud_jms table.
Run the attestation task again now and retest the issue with latest Request ID. -
Error 1085 : The element "LINK" must be terminated.
I am moving a working Flex application from a development
server to a testing server. When I run my application, I get the
Error 1085, referencing the element "LINK".
However, I do not have any elements named LINK. Why would I
be getting this?Adobe Newsbot hopes that the following resources helps you.
NewsBot is experimental and any feedback (reply to this post) on
its utility will be appreciated:
Flex 3 - About code editing in Flex Builder:
The configuration of the Flex Development perspective depends
on which editor ... error indicators are displayed next to the line
of code in the editor and
Link:
http://livedocs.adobe.com/flex/3/html/code_editor_2.html
Daniel Harfleet: Java Development in Flex Builder:
Java Development in Flex Builder. This coffee break guide
will show you how to set up Eclipse .... In the New Flex Project
Wizard it is giving me an error.
Link:
http://weblogs.macromedia.com/dharfleet/archives/2006/07/java_developmen.cfm
Flex 3 - About Flex Builder perspectives:
The Flex Development perspective includes the editors and
views you need ... The Outline view also displays syntax error
alerts that the compiler generates.
Link:
http://livedocs.adobe.com/flex/3/html/intro_workbench_4.html
Dustin's Software Development Cogitations and Speculations:
It is very convenient during Flex development to have my
fault handler methods automatically put fault and error information
into my clipboard so that I can
Link:
http://marxsoftware.blogspot.com/2007/11/placing-flex-errorfault-information-on.html
Flex 3 - Comparing the Error classes:
Adobe Flex 3 Help ... ActionScript provides a number of
predefined Error classes. ... to aid ActionScript 3.0 application
development and debugging.
Link:
http://livedocs.adobe.com/flex/3/html/11_Handling_errors_11.html
Disclaimer: This response is generated automatically by the
Adobe NewsBot based on Adobe
Community
Engine. -
Error message - The HP Deskjet 1510 Series was not found
I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.
Hey , Welcome to the HP Support Forums!
I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below. Please disconnect the USB Cable from your printer and computer before proceeding. Step 1: Remove Driver: 1. Click on your Start button 2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section. 3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall. 4. Next, click on the Start button and type Devices in the 'Ask me Anything' box 5. Click Devices and Printers 6. Under the Devices and Printers window look for your HP Deskjet. If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window. 8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step. Step 2: Clear Temp Files: 1. Click on your Start button 2. Type Run. Click Run to launch the Run dialogue box. 3. In the Run box type %temp% and click OK 4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step. Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck! -
Error in creation of billing document: update was terminated
hi experts,
i am facing one problem while creating "Billing Document" in VF01 . After i save it says 'Document 941700032 has been saved' but later after i click on tht it shows d error "update was terminated' and billing document no i not getting created .
ThanksAfter save, and during SAP's update processing, a fatal error occured, causing a rollback of the transaction. Since the user is no longer in that same transaction at this point, SAP issues the Express Document to attempt to inform that there was a failure. Check ST22 for abend...in the meantime, check for exit coding that may be causing an error...In my previous life, working with SD/LE at lot, I was able to get these regularly by fouling up my exit coding....lol.
-
How to suppress the popup 'Express document "update was terminated" ?
Hi,
I am calling few BAPIs in UPDATE TASK Function Module.
Whenever any of the BAPI returns any Error message I get a popup for 'Express document "update was terminated" from the author'.
I know that my SAP Inbox has the Update Terminated Message triggered by the system.
Is there any way to suppress this popup, even if BAPI returns any error message?
I am storing the error messages sent by BAPI in an internal table and those error messages are enough for the user.
But the popup is misguiding to the user thats the reason we dont need the popup for 'Express document "update was terminated" from the author'.Hi,
Its not possible to suppress the express termination message popup. I hope document could not have been saved to database.
Just try to find out the route cause of the error.
Error messages are not allowed in FMs called in UPDATE TASK.
One work around i can suggest is, try to run the BAPI in test mode before calling the update task FM. If the test mode call is error free then only call the UPDATE TASK fm.
Hope this solves your issue.
Thanks,
Vinod. -
Error in Bdoc '....Editing was terminated'
Hi All,
I am replicating the BP from CRM to ECC using BDoc type 'Bupa_main' when the BP
is saved under some role.
When I save the BP , the Bdoc shows in error 'Partially send, receivers have errors'.
After reprocessing the Bdoc in transaction SMW01, 1 entry is created in KNA1 and CRMKUNNR,
but no BP is created. The error list in transaction SMW01 is shown as
Messages for business partner 0100000252: XR 100
....Editing was terminated FB 13
I checked in ST22, there are no runtime errors.
I tried CRMM_BUPA_MAP, there I get the message as
'005 4AF79F489B97018: Object is in status Running'
And there are no queues in SMQ1 or SMQ2.
Any idea why it is happening or how to solve it?Hi Aditya,
The problem is mainly because of some user exits in your system.
So, if its possible, deactivate all the user exists from table : TBE24 and TPS34 in your system and try again.
And also check in the ECC system - CRMRFCPAR table field SEND_XML is set to "X". If both CRM and ECC are unicode system, then the SEND_XML field in the CRMRFCPAR table in the R/3 system should be set to "X"..
Also refer the following notes :
928974
788871
621470
1049761
Hope the above information would help you to solve the issue.
Best Regards,
Vignesh Ravikumar -
In iOS 4.x there was a button that changed from 1X to 2X to 1/2X and changed the play speed of the podcast. I can not find it in the new Music app in iOS5, but it seems to be set to 1/2X at the moment. How can I change this?
have the same problem, mine is now playing all at half speed, but only with podcasts! I normally play podcasts at 2x speed but the speed button has disappeared in iOS5, so - this is abviously a bug or the soft reads the old setting from somewhere - and there is no way resetting it - so I hope apple will fix this soon, I really play podcasts every day. and the iPhone is not loud enough and it's batteries aren't cool by design. so..
just to support your problem, maybe there's a free player somewhere until apple fixes that bug? (yes, it is a bug - read this problem in several other forums) -
If anyone could help?
Hello dvf276
Follow the steps in the article below to resolve issues with your iPhone not powering on.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
-Norm G. -
Hello everyone,
I'm using an httpservice with a php script and resultformat "e4x".
When I call my script directly in my browser, I receive a well formatted XML file (I think so as I can even see the closing tag </elements>).
But, in my application, the debugger gives me the error saying that the end-tag is not there...
Can you please help me?
Here's the script:
<?php
//Set no caching
header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");
header("Content-Type: text/xml");
// Connect to MySQL database
require_once('database/ConnectDB.php');
mysql_select_db($database_ConnectDB, $ConnectDB);
function DisplayElements($zone_id){
$query = "
SELECT
element.element_id, element.name, element.description, element.zone_id, actval
FROM element
LEFT JOIN elm_motor USING (element_id)
LEFT JOIN modregister USING (element_id)
LEFT JOIN module USING (module_id)
WHERE element.type_sw_id = 602
AND module.status >= 128 AND element.zone_id = $zone_id
GROUP BY element.element_id ORDER BY name
$result = mysql_query($query) or die(mysql_error());
while($data=mysql_fetch_assoc($result)){
echo '<element id="'.$data['element_id'].'" name="'.$data['name'].'" description="'.$data['description'].'" zone_id="'.$data['zone_id'].'" actval="'.$data['actval'].'" prefval="'.$data['prefval'].'"/>';
$zone_id = $_POST["zone_id"];
echo '<elements>';
DisplayElements($zone_id);
echo '</elements>';
?>
Thank you very much,
a beginner...The problem is that your PHP script is only going to provide a single response, so the second echo never gets to your Flex app.
Store the result in a variable and echo that:
$returnVal = "<elements>";
... code to add elements
$returnVal = "</elements>";
echo $returnVal;
If this post answers your question or helps, please mark it as such. -
After uploading iOS7 on the 4s lost the ability to control the keyboard click volume, there is not the same volume control that was there prior to the download.
Has anyone else encountered this? If so and anyone has a solution I would be very greatful.
Thank you.I have the same problem. There used to be a volume control for the keyboard clicks. That's no longer an option. In Settings > Sounds, there is only the option to turn keyboard clicks on/off, but no volume level option.
Very frustrating when typing in a quite place. I used to be able to turn the volume low so I could just barely hear it but no one else could. -
Data element was activated (error in the dependencies)
Hello Friends,
We had released some TR yesterday to move to Quality and this was not moved successfully and in the TR logs I found the following message. Not sure what to do...request if some has encountered similar situation to give their feedback.
We had similar problem 2 days ago with another TR failing for the same reasons for another Data element...both are mentioned below...
We have adjusted the table in SE14 also but still the same. In development box we do not have any issues everything is active.
We have also regenerated the table maintenance also.
Following objects not activated/deleted or activated/deleted w. warning:
Table YAR_CN_BS_ACT could not be activated
(E- Nametab for table YAR_CN_BS_ACT cannot be generated )
Data Element ZLINE was activated (error in the dependencies)
Data Element ZZSERIAL was activated (error in the dependencies)
Following objects not activated/deleted or activated/deleted w. warning:
Table YAR_CN_GAAP_AREA could not be activated
(E- Nametab for table YAR_CN_GAAP_AREA cannot be generated )
Data Element ZZDES was activated (error in the dependencies)Ramesh,
When you transport a custom object, you need to make available other dependent custom objects for that object in the target system, means that when you transport a custom table you need to take all custom domains, data elements also in the TR if they are not already existing in the target system.....
Pls check that in your respective TRs, do you have data elements ZLINE, ZZSERIAL also....same for ZZDES...., Also include their domains if they are custom. Now, to remove this error, create a new TR and include all these custom data elements in it and transport to Quality. After that re-import your erroneous transports in Quality with help of basis.
BR,
Diwakar -
The CMS on machine ' servername ' was stopped due to a critical error. (FWM 20031)
Dear Team,
We have installed BOBJ server 4.1 and CMC was working fine.
Now while installing the BOBJ explorer SBOP_EXPLORER_4.1_SP2_MULTIOS__DL it showed at the end of the installation as ended with error.
After this when we tried to login to CMC we are getting the error as The CMS on machine '<servername>' was stopped due to a critical error. (FWM 20031).
I have attached the "error_boe_cmsd6400" log file with this.
We are unable to find the cause of the error.
The output of the command
./ccm.sh -display -cms <servername> is as follows,
Creating session manager...
Logging onto CMS...
err: Error: Could not log on to CMS (STU00152)
err: Error description: The system <servername> can be contacted, but there is no Central Management Server running at port 6400.
Kindly help on resolving this issue.Hey Mathan,
You mention you installed BI 4.1 and Explorer 4.1 SP02
- Did you try to remove Explorer 4.1 SP02 and go with the same patch level as BI 4.1 instead?
- Or better, did you try to update BI 4.1 to higher version (SP02) and then do Explorer at same level?
Does /var/log/admin (for AIX) shows anything of interest (CMS instability)?
After you aligned the versions and if the problem is still occuring, you will probably need to log an incident with support, this kind of problems can be pretty straight forward to resolve but also require a fair amount of data gathering (survey script, OS + env, CMS trace, stacks from cores if CMS crash)
Also: where did you get the information attached extracted from?
Seems some libraries might not be compatible. Try to source env.sh:
cd <install_dir>/sap_bobj
. ./setup/env.sh
ldd ./enterprise_xi40/aix_rs6000_64/boe_cmsd
ldd ./enterprise_xi40/aix_rs6000_64/libcmscommon.so
ldd ./enterprise_xi40/aix_rs6000_64/libobjectsubsystem.so
EDIT: Also try to repair the install when the versions are aligned: 1803645
Hope this helps -
Error Generating the Task Form
While publishing a new SharePoint Designer 2010 List Workflow I get an Error:
SharePoint Designer encountered an error generating the task form. Server was unable to process request.--->Activation could not be completed because the InfoPath Forms Services support feature is not present.
I was able to publish SPD Workflows until a couple of days ago. Existing ones can be republished but not new ones.Try running the following cmdlets.
Disable-SPFeature "IPFSSiteFeatures" - URL "Path"
Enable-SPFeature "IPFSSiteFeatures" -URL "Path"
These cmds will restart the Infopath Forms Services support features, which is responsible for supporting publishing Infopath Forms.
Hope this works for you.
Maybe you are looking for
-
hi all when i am trying to clear the vendor open items using tcode f.13 for a production run, the system gives 2 error messages for each vendor like scheme screen mtype mid mno message SAPMF05A 0700 S 00 344 no batch input data
-
Can remove agentless managed sql instances from machines that no longer exist
We have a couple of clustered sql servers that are no longer powered on. They had several sql instances on them. We are not able to remove the sql servers from SCOM 2012 SP1 because they have agent less managed devices (the sql instances) We can remo
-
99 or 100% when it says Premiere Pro has stopped working and needs to close. What's going on?
I am using the premiere pro trial at the moment and have been trying to render a video for a solid week now. My computer is far more powerful then the recommended specs and yet it still takes 2 hours to attempt to export a 3 minute video (that isn't
-
Lion does not have "Save as." How do I change the name of a Keynote presentation?
How can I change the name of a Keynote presentation in Lion since it does not have "save as'?
-
No Audio on iPod Video playback
hello, I've tried to resolve the problem myself by reading the boards and various "how-to's" but never really got a straight answer. My concern was (like many others) a problem with video on my iPod. I had no problems tossing a video into my library