Error 77009 labview 2014 with solidworks 2015

hello please am a student i want to ask you some quastion that i have probs with it
i want to creat an application with labview 2014 and solidworks 2015 with softmotion simulation so i got a probs that i cant deploy my project with error 77009 (0x00012CD1)
message error :
NI SoftMotion Error Codes
A function in NI SoftMotion was called without creating or starting the controller service. Verify that the NI Scan Engine switched to Active mode and that there are no faults on the axes.
please your help was a great things
thank you

Hi,
Here are a few helpful resources further explaining Scan Engine and developing with cRIO.
http://www.ni.com/pdf/products/us/fullcriodevguide.pdf
http://www.ni.com/white-paper/7693/en/
I hope this helps. Have a great day!
- Kale

Similar Messages

Updated ID CC 2014 with Feb 2015 release, ungrouping objects causes them to vanish

I'm using Windows 7, CC 2014 and just updated the program today with the Feb 2015 release.
I have grouped a few objects, moved them to another page in a document and now when I ungroup them, they vanish. Thank you for your assistance.

@Westina – wow. Did some testing and can see this as well.
It seems to be a new bug in the new feature "Ungroup Remembers Layers" of the Groups Panel.
I have to investigate this a little more, but I think this could happen, if you:
Create a new document with facing pages pages.
Make it two pages long.
Begin numbering with 1.
Draw out two rectangles on page number 1, object A and object B.
Add a new layer. Now we have layer 1 and layer 2.
1. Position object B on layer 2
2. Position object A on layer 1
3. Group both objects to group G
4. Make layer 1 invisible
5. Moving by holding the alt key + dragging G to page two => duplicating G to G2
6. Ungroup G2
All objects from ungrouping G2 have "vanished".
Well, this must be a bug.
I checked by script, if the vanished page objects are still there, but somehow invisible after turning on visibility on all layers:
If one does the 6 steps above on an new document, one should have 5 objects in the document after step 6:
1. Object G on page 1 (a group without its element does count here as object)
2. Object A inside the group on page one
3. Object B inside the group on page one
4. Ungouped duplicate of Object A on page two
5. Ungouped duplicate of Object B on page two
A quick check by script is telleing me:
Not all is lost, the vanished object are somehow there, but where?
First thing: I set all my layers to visible.
Second thing: I changed my view to zoom out 18 % and realised that:
The ungrouped objects are misplaced:
Positioned on the pasteboard of spread 1 (page 1).
I recorded a little movie of my German InDesign CC 2014.2 on OSX 10.7.5 one can download from my Dropbox account to show you this:
Dropbox - v2-Misplaced-Objects-After-Ungroup.mov
Uwe

LabView 2014 - DSC module with Ethernet Modbus: Error 56

Sorry,
I try to connect modbus by Labview 2014 DSC module like this figure, and it occurred error code 56 at "Read Input Registers",
I have look for many soluctions, but still fail, can someone help me? thank you very much!

Did you confirm the address and port of your slave device is correct? Also, is your device a modbus master device or slave device?
I suggest you to read the help first, and then run the corresponding example
You can run the two example to test if the modbus function is OK. Then you can come back to test your third party device.

Compile 9076 with LabVIEW 2014 Worked good with 2012 SP1

An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error 7 occurred at Open VI Reference in nirviOpenVIRefByNameOrPath.vi->niFpgaRemapObjsAndListIfUnderXNode.vi->niFpgaRemapObjsHandleXNodeSubErrors.vi->nirviMassageErrorList.vi->niFpgaErrorDialog_ParseErrors.vi->niFpgaErrorDialog_ReadErrorData.vi->niFpgaGenerateCode_ErrorDialog.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
VI Path: C:\Program Files\National Instruments\LabVIEW 2014\rvi\CodeGenErrorUtilities\Diagram Constant
All text parsed:
<CodegenErrorList>
          <CodeGenErr>
            <ErrorCode>-64001</ErrorCode>
            <DynamicText>
              <TreeLineInfo>
                <TreeInfo>
                  <TreeID>1</TreeID>
                </TreeInfo>
              </TreeLineInfo>
            </DynamicText>
          </CodeGenErr>
          <CodeGenErr>
            <ErrorCode>-64001</ErrorCode>
            <DynamicText>
              <TreeLineInfo>
                <TreeInfo>
                  <TreeID>1</TreeID>
                </TreeInfo>
              </TreeLineInfo>
            </DynamicText>
          </CodeGenErr>
          <CodeGenErr>

Hi Nieman,
You have the right compilers for your FPGA targets, based on KB 609GUVBT.
Error -64001 indicates that there is an issue with one of the nodes in your VI. Since you are able to compile a blank FPGA VI, then you should try to identify the node that is causing this problem. When trying to pinpoint this node, I’d recommend executing your FPGA VI with simulated I/O on the development machine, as described in KB 3W6EFRLX,
Also, are you able to reproduce this issue when running one of the LabVIEW Example Finder FPGA VIs that targets your NI 9076? You can find these examples in the Example Finder's Hardware Input and Output>>CompactRIO section.
Regards,
Tunde S.
Applications Engineer
National Instruments

Unknown error when adding a DAQ assistant to a blank VI in LabView 2014

Hello,
I currently have an issue when I try to add a DAQ assistant to a blank VI in LabView 2014 Service Pack 1, version 14.0.1.
It was working previously and has now stopped working. I have reinstalled LabView 2014 but the problem still exists.
I have also reinstalled NI-DAQmx 14.5 but this did not cure the problem either.
I have made sure that the C:\Program files\National Instruments\MAX folder has Read & execute, List folder contents, Read function allowed for the user account in use on Windows 8.1
Thanks in advance for the help.
Scott.

As soon an the DAQ assistant is dropped onto the VI block diagram an error window pops up stating that "An unknow error has occurred" with an ok button. This does not force LV to close, the DAQ assistant icon stays on the block diagram, the block is non functional i/o signals available to wire to, I can not access any properties for the DAQ assistant. Other than that LV appears to be functioning.

When replacing Labview 2013 with Labview 2014, do I firstly need to uninstall Labview 2013?

I have just recieved my latest version Labview 2014 CD.
When installing this new version, do I firstly need to uninstall previous Labview versions?
Solved!
Go to Solution.

Bob_Schor wrote:
The reverse, however, is not true. Once you install one version of LabVIEW, you cannot install an older version without uninstalling everything and "starting over". Be warned ...
Not exactly true. You can install just an older version of LabVIEW. I have had LabVIEW 2012, 2013, and 2014 installed on a computer and then installed 8.2.1. It is all of the support drivers and what not that do not install side-by-side. So the real lesson here is that if you install an older version of LabVIEW, pray that your current drivers support that version of LabVIEW. You will need to reinstall the drivers to install the support for the older version of LabVIEW though. Installing just the support takes hardly any time.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Making labview 2014 and Access 2013 db working correctly

Hi all,
i'm trying to gain access to a database created by Access 2013 from Labview 2014. Since we dont want to buy the NI toolkit i thought to use the old LabSQL library. Has anyone tried to do the same thing or give me some hints about it?
Actually i have tryed to run the example shipped with LabSQL but i received an error:
Exception occured in Microsoft OLE DB Provider for ODBC Drivers: [Microsoft][Driver Manager ODBC] Nome origine dati non trovato e driver predefinito non specificato. in ADO Connection Open.vi->Example - Fetch a Table.vi
Reading the README file of the LabSQL i found this:
2. As with any database application on Windows, you'll need to create a DSN (Data Source Name) in the ODBC control panel. This DSN is used in your LabVIEW application to connect to the appropriate database. If you want to set up the example database, do the following:
   a.Go to your Windows Control Panels, and open "ODBC Data Sources"
   b.Click on the "System DSN" tab
   c.Click on the "Add..." button.
   d. From the list of drivers, choose "Microsoft Access Driver"
   e.At the dialog box, type in "myDB" for the Data Source Name. Then click on "Select..." button, and find the file "Sample Database.mdb" included with the LabSQL examples. Leave everything else as it is, and hit OK.
   f. Close the ODBC control panel
   g. Test the connection by running one of the examples provided.
My problem is that i can't find the driver named "Microsoft Access Driver" so i can't continue through the points of the instructions. I only found "SQL Server" and "SQL Server Native Client 11.0" but if i select one of this the dialog box that appear later is different from the one described in the README instructions...

You can certainly access the database without the toolkit. There are drivers that I posted on the forum and I have a small complete application on my blog -- you can even download the code from my SVN repository.
In terms of you specific problem, you don't need a DSN. What you need is something called a "connection string". Also, don't waste your time with ODBC. The built-in ADO drivers are easier to use. Again, check my posts for details -- I did a 3-part series on database connectivity.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

LAbVIEW 2012 and Solidworks Examples update

Hi,
I noticed that the examples shipped with NI Softmotion module is not updated (SoftMotion>Mechatronics). Although the directory has been changed, the example still points to LabVIEW 2009 folder. I also would like to ask whether these examples was tested with LabVIEW 2012 as it doesn't run with my machine which has LabVIEW 2012 and Solidworks 2010 SP4.
Your help is much appreciated.
P.S: I apologize for double posting since no single reply was mentioned on Motion forum.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

The problem seems to be with Scan Engine.
Here is a screenshot of the error mesage when deployment:
Configuration:
OS: Windows 8 Final
LabVIEW Version: 2012 with all updates installed
NI SoftMotion Version: 2012
Solidworks Version: 2010 SP4
I doubt the problem lies in OS as all examples are running flawlessly except that with Mechatronics Examples. Hope to get any response from NI SoftMotion Team. Thanks for your assistance in advance.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

CanOPEN cRIO-9067 & LabVIEW 2014 support

Hello,
We have cRIO-9067 and NI 9881 CANOpen communication module.
According to the NI 9881 product description page the module should work with cRIO-9067. However, the latest NI-Industrial Communications for CANopen 1.0.3 doesn't support LabVIEW 2014 and NI RIO 14.0. This means we can't use cRIO-9067, can we? If so, when the next release of the driver will be availiable? Will it work with cRIO-9030?
Thank you in advance,
Nikita.
Nikita Prorekhin
Certified LabVIEW Developer
DigiMetrix GmbH
web www.digimetrix.com
Solved!
Go to Solution.

Hi Nikita,
This is an error on the webpage. Currently, it should actually read:
The NI 9881 module requires the NI cRIO-911x/9068/908x chassis and the LabVIEW FPGA Module.
Support for the 906x and 903x targets will come with the NI-Industrial Communications for CANopen 14.5. Typically, the release is around the time of the LabVIEW 2014 SP1 release. I apologize for the inconvenience, and have reported this to the person in charge of the page to correct this error.
Thank you!
Matt S.
Industrial Communications Product Support Engineer
National Instruments

Error 77080 - labview softmotion

hi all,
I am working with labview softmotion and solidworks.
I am posting this question since a new problem happened to me. Everything was working well, and suddenly it became impossible to start the solidworks simulation through the labview project explorer. When I click "start simulation", as i was doing before, the error 77080 pops up, saying "an error occurred while starting the solidworks simulation" and "an error occurred while reading deployed data".
It would be really nice if someone can provide me some help about this problem.
Thank you in advance.

Hi,
It took me a while to figure out how to tackle this problem, therefore, I'd like to share the solution with the community:
Save any design with your Solidworks version: The files shipped with SoftMotion are created with an old version of Solidworks (prior to Solidworks 2013 for sure). So first step is to save any model using your current version.
Make sure you close your LabVIEW project and Solidworks after enabling Motion addins in Solidworks: This is the major and common problem for that error. Reopeneing both thereafter would solve the problem.
Open your Solidworks model from LabVIEW project, then make sure you "Synchronized it".
Deploy your solidworks model and axis.
Then starting simulation would run normally
Hope it helps.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

Error 2519 LabVIEW could not load the TDMS file component

Hi there,
I have LabVIEW 2014 for Linux, and have successfully installed it on OpenSUSE 13.1 with no issues.
The problem I am seeing is with TDMS, I have placed down and "Open TDMS" followed by "close TDMS" provided it my file path to my TMDS File and I see the following error:
I have searched NI.com and google, and what I keep finding is the problem with cRIO. I am running a desktop version of Linux as mentioned above.
Any help or advise would be greatly appreciated.
Many thanks
Kevin
Solved!
Go to Solution.

Hey
Thanks for getting in touch with me. I can confirm I have the TDMS components installed and in the correct location.
I will try to reinstall my LabVIEW and see if that helps.
I have two systems that both are running the same version of Linux and I have the same issue on both systems. One is a physical system the other is a virtual machine replicating the physical system.
Many Thanks

Is there a possibility to start the VeriStand 2014 Gateway programatically using LabVIEW 2014?

Hello,
This is a reload of the Is-there-a-possibility-to-start-the-VeriStand-2011-SP1-Gateway because what worked in 2011 SP1 does no more in 2014.
I ported the code from the previous topic, do do the same thing (calling "__cdecl Int32 StartVeriStandGateway(out Int32 handle)" in "C:\Program Files (x86)\National Instruments\VeriStand 2014\Data\NationalInstruments.VeriStand.Gateway.dll".
Doing this from a .NET programme (console or windows process) or directly from a DLL node in LabVIEW 2014 seems to have no effect, knowing the .NET code worked in 2011 even when called from a Windows service.
Is there a new way to do it?
By the way, the "NationalInstruments.VeriStand.WindowsRegistry.GetInstallationDirectory()" method has disapeared from the assemblies.
Best regards,

Hi Jarrod,
You're rigth, after PC reboot the Gateway starts when calling the DLL node (OpenWorkspace & GetSystemStatus are called with no errors), but when I try to ConnectToSystem the program stays blocked into the sub-vi, although the code works well if the Gateway was previously started normally by running VeriStand from Windows.
I tryed to change the call policy in the DLL node (UIThread & any thread) but it seems doing nothing.
Please find here joined the test files and debug capture of the stall.
Best regards,

Sorting Machine.SLDASM file from the labview \examples\Motion\SolidWorks\SolidWorks Files

Hi.
I'm new with labview. I need to use labview for my project for virtual pototyping.
Foe beginning, I'm trying the tutorials from http://www.ni.com/white-paper/9566/en/
I'm trying to open the below link both in LabVIEW and SolidWorks to understand the assembly operation.
<labview>\examples\Motion\SolidWorks\SolidWorks Files directory
I've looking for the 'Sorting Machine.SLDASM' file.
I've search everywhere but I can't find the directory for the file.
Really appreciate if anybody can tell me where I can find the link.
Thanks in advance.

The problem seems to be with Scan Engine.
Here is a screenshot of the error mesage when deployment:
Configuration:
OS: Windows 8 Final
LabVIEW Version: 2012 with all updates installed
NI SoftMotion Version: 2012
Solidworks Version: 2010 SP4
I doubt the problem lies in OS as all examples are running flawlessly except that with Mechatronics Examples. Hope to get any response from NI SoftMotion Team. Thanks for your assistance in advance.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

Error generating report job with the task name 'FSRM_Report_Task

Since this morning we have been having a problem with FSRM on Windows Server 2008 R2, it is no longer running storage reports (both scheduled and on-demand).
We get the following in the event logs:
Log Name: Application
Source: SRMREPORTS
Date: 09/06/2014 08:09:55
Event ID: 752
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: FILESERVER2.curriculum.riddlesdown.local
Description:
Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SRMREPORTS" />
<EventID Qualifiers="0">752</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-09T07:09:55.000000000Z" />
<EventRecordID>42920</EventRecordID>
<Channel>Application</Channel>
<Computer>FILESERVER2.curriculum.riddlesdown.local</Computer>
<Security />
</System>
<EventData>
<Data>Error generating report job with the task name 'FSRM_Report_Task{3add1760-4e79-4141-baba-cb53391bef3e}'.
Context:
- Exception encountered = Invalid argument: StorageType = '101'
</Data>
</EventData>
</Event>
We have uninstalled and reinstalled the FSRM role service but are still having the same problem.
Anybody have any ideas?

Hi,
From the error message, it failed because of "invalid argument: storagetype = '101' ".
101 means the storage type is "system" + "cache". Is there any change on your storage before the issue occurs? For example whether the source storage is changed?
FsrmStorageModuleType enumeration
http://msdn.microsoft.com/en-us/library/dd392346(v=vs.85).aspx
If you have any feedback on our support, please send to [email protected]

How to open labview program with Quit Labview function inside?

Hi Any idea how to open labview program with Quit Labview function inside?
I forgot to add and set the condition of the type for this program.
If the program is an application, it would close straight away.
If it is still labview work, it will go straight to editing program without closing.
So I need to recover, open it and make some changes.
Clement
Solved!
Go to Solution.

Put the VI in a project and open it from there, then it shouldn't autorun. You can use App.kind property of application to decide whether to close or not.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Error 77009 labview 2014 with solidworks 2015

Similar Messages

Maybe you are looking for