Error 8, [(8, 101, 0)]

why does you software give the following error message details in dutch 
error 8, [(8, 101, 0)]
this means that your developers aren't doing there jobs because this is not supposed to happen.
FIRE THE **bleep**ERS BECAUSE THEY DON'T KNOW WHAT THE **bleep** THEY'RE DOING
I've reported about ³10 errors in the last 6 months and I don't see any changes being made so I'm getting tired of sending these kind of messages. If this message isn't solved within 14 days, {Content Removed: legal discussion}

Hello BLKFEATHER, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing scan issues.  I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • Error at posting 101 movement

    Dear all..
                     I got error at posting 101 movement " Period posting Date is in future adjusted in line with posting date"
    Please resolve the pblm..
    usefull threads will be rewarded.
    Regards
    Kumar

    HI,
    This should probably be an warning message and not an error message
    Pls check and confirm as it sayds that system has adjusted the future date with the dc. date.
    If the period is not open then u may have to open the posting period for the said month in MMPI.
    Hope this helps.
    Regards,
    Prasanna
    Award pls if helpful

  • Error (515) (25 ::101), can't launch Analysis Server Adobe After Effects CC

    So, I've been struggling with this issue for many hours now. I've been trying to use the 3D Camera Tracker on a couple video files (mpeg and mp4), and have been getting the "After Effects error: Could not launch Adobe Analysis Server. (515) ( 25 :: 101 )". and stabilisation of deformation VFX, I also get the same error... Why??

    Could be the compression scheme of the movie files. Could be a 3rd party codec conflict. Could be that you don't have the latest build. Could be something else with your OS. If we knew at least something about your system and your footage maybe we could come up with an idea that would help. There are hundreds of different flavors of MP4 and MPEG files. I have no idea what could be going on because I've never had this problem with any of the production footage that I use in my daily work.

  • Cs6, error (515) (25 ::101), can't launch Analysis Server

    So, I've been struggling with this issue for many hours now. I've been trying to use the 3D Camera Tracker on a couple video files (mpeg and mp4), and have been getting the "After Effects error: Could not launch Adobe Analysis Server. (515) ( 25 :: 101 )".
    I've already tried adjusting fire wall settings (including disabling it all together). Twice a full uninstal and reinstal, using Adobe cleaner for the second go around. a reinstal of updates.... The problem persists.
    I'm using Windows 7, and I know I have ample hardware resorces.
    Could there be an issue with have Cs5.5 instaled as well?
    Are there files that should be moved or a patch I could download?
    Tired of pulling my hair out over it, any suggestions?

    I'm not very familiar with these monitoring programs,  that said, looking at the Process Explorer from Sysinternals, I can see "AfterFX.exe" running with "dynamiclinkmanager.exe" as a sub operation and "Adobe QT32 Server.exe" as a sub of the previous.
    I applied the "3D Camera Tracker" in AE, got the same error message. No sighn of "Adobe Analysis Server" running.
    I found the "Adobe Analysis Server" application in the "support files" sub folder of "Adobe Afer Effects CS6" file. I double clicked it and "Adobe Analysis Server.exe" appears as a sub process of "AfterFX.exe". Tried to analyze the footage, and the same error message pops up.
    It seems as if AE can't start the AAS on its own, and even with it running along side with AE, it doesn't know how to comunicate with the analyzer.
    is there a way to see where AE is reaching out to AAS, possibly redirect it or move the application?

  • Error when doing 101 movement

    Dear All,
    We are doing the configuration on a fresh copy of a ECC 6.4. We have created the relevant configs. When we try to do the 101 movement in MIGO transaction an ABAP error occurs. Below i have mentioned the error. However when we did a 561 movement and 313 movement, it happened properly and material document created. why is this happening. Any help is highly appreciated.
    Syntax error in program "SAPLV45P"
                                                                                    Error analysis                                                                
         The following syntax error was found in the program SAPLV45P :            
         "The data object "FXVBAP" does not have a component called "MSR_APPROV_"  
         "BLOCK"."                                                                 
    Regards,
    DTD

    Ask the developer of the userexit to fix the problem. the user of the last change is usually listed in the dump (can be seen in ST22)
    It pretty much depends for what you do the 101 movement, if the PO is referenced to a sales order or  the goods receipt is in reference to an outbound delivery or even triggered by posting a goods issue to a stock transfer order.

  • Error: Movement type 101 k not planned

    Hi Freinds,
    While doing GR for Consignement framework order  , im getting this error as 'Movement type 101 K is not planned. (Entry is not copied over)'.
    Could u help me with this please.
    Thanks
    Akkshaya

    Hi,
    Enter the item category K for the consignment item in your FO . To ensure that the goods receipt is posted to the consignment stores and an invoice receipt cannot be generated for the item.
    BR
    Diwakar
    reward if useful

  • Error: (515) ( 25 § 101 )

    Hello everyone,
    after I click on "3D Camera Tracker" AE brings me that Error. Can anyone help me or have it to be fixed by Adobe?
    Thank you,
    Michael

    It was my very first project because i bought the creative cloud last saturday. So i cant change something. The exact steps are:  I made a new conposition and "after I click on "3D Camera Tracker" AE brings me that Error".
    And it becomes stil worse. I just wanted to render a clip in premiere cc, but it says there is a "serious problem". and then premiere cc is crashing.
    nothing works, halleluja. Steps in premiere: Add the movie-file to premiere -> cmd+m -> crash
    And i checked it again, MacOS & the adobe-things are updated.
    before I tell you everything about my computer, a added two screenshots.
    thank you for your responses.

  • Error while posting a cancelling a delivery through VL09 in WM

    Hi Guru's,
    We have WM set up i have created a return sales order and the return deliivery to the customer and i have made a trnasfer and the stock is place in the permanent from the interim bins (904) and then PGR.
    Now i want to cancel that material document and the delivery, while doing VL09 reversal of material document i am getting an error "Storage bin 101 904 5190000000 does not exist.
    But for the reversal movement type 652 i have set it has a dynamic bin creation means it should take delivery number 5190000000 has the dynamic bin but it is not creating.
    Can any one help me in this

    you just have a big problem.
    I think the only way you have is to create the quant with zero quantity in this interim bin with IT options: direct table maintenance. 
    Then you do a LT01 to move the stock from permanent bin to the interim bin.
    For this table maintenance you have to be very carefull as you need to create the LQUA entry with exact the content that is stored as WM data in LIPS table to your delivery.

  • Error Message FICUSTOM101 when Clearing/Payment Invoice

    Hi All;
        we are making a clearing by F-32 (clear customer create residual item) and system returns an error message "Invoice Reference & does not reference an invoice". We use the program RFFMS200, payment selection with Payment matching Active. Do you know how can I solve it?
    Thanks
    Regards,
    Gustavo

    Hi,
    As described in the note 446049 the error message FICUSTOM 101 is customizable and in order to avoid this message  you can
    deactivate it. You can make it in customizing (transaction SPRO) under "Public Sector Management   > Funds Management
    Government   > Basic Settings   > Change Message Control".
    I hope this helps.
    Regards
    Ravinagh Boni

  • Error opening PDF Files

    Hi,
    when i am calling a pdf file in our BI System i become the error message with ADS. I have checked the programm FP_TEST_TEST_00 and it comes a system error up.
    error code: 100.101
    ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure
    Fehler SOAP Framework: SOAP Runtime Exception: CSoapExceptionTransport : HTTP receive failed with exception communication_failure(100.101).
    have somebody an idea to this?ß
    Tkanks and Regards
    Eimal

    I'm also encountering the same problem with transaction SFP, that is when activating a form.
    Anyone has the solution?

  • I need to get the service order number in the error message

    i need to display the error message with the service order number telling that
    "record does not exist for service order xxxxxxxxx"
    xxxxx-should be the service order number.

    you can define a error no. in message class se91.
    if the error is suppose 101.
       101 - Record does not exist for service &
    use & to concatenate ur variable with the message.
    if you want more than one just addon & to that
    like 4 varibles
       101 - Record does not exist for service & & & &
    in ur code, u can display the message like
    MESSAGE i(ZE)101 with variable
    ZE is ur message class

  • RTSP Protocol Error

    Hi all.
    I am using Airfoil 3.2.1 and AE firmware 7.4.2. Now I know these are out of date. But my system was working fine. I did however upgrade the AE FW to the newest one some time ago, had all sorts of problems and had to revert to the older version. So I really don't wish to go through all that again.
    Now, out of nowhere this problem started today. My Airfoil could not connect to my speakers on AirTunes. I have reinstalled the software, performed a permissions repair, rebooted, talked to, stared at and said a few curt words to it and still it fails to connect. I get this error information:
    Domain: SSAirfoilErrorDomain
    Code: -1500
    NSLocalizedDescription: RTSP Protocol Error
    NSLocalizedRecoverySuggestion: Airfoil received an unexpected status code (Code: 500, Reason: Internal Server Error).
    SSRTSPRequest: RECORD rtsp://10.0.1.2/3329666127 RTSP/1.0
    User-Agent: Airfoil/3.2.1 (Macintosh; N; Intel)
    Active-Remote: 1730019454
    DACP-ID: 9BADA7F0CCA4316E
    RTP-Info: seq=4878;rtptime=0
    Client-Instance: 015DC7C5A93A1356
    Range: npt=0-
    Session: 1
    CSeq: 4
    SSRTSPResponse: RTSP/1.0 500 Internal Server Error
    Server: AirTunes/101.9
    CSeq: 4
    After thinking and really understanding nothing from this, I suspect it is the AE, it has always as gremlins. But this is a new one and nothing on my imac has changed in the last day which could result in a conflict of software. Through doing some diagnostic work myself I don't this it is the AirFoil software. Through it I can connect to the computer speakers. I can stream music from itunes8 to the speakers via AirTunes no problem.
    Any ideas???
    Stu.

    Well, i thought i should best upgrade which I did to 3.3.1, and it cost me to do so, but it is working again, and that is the main thing! It is a great little app!
    Solved.

  • Error in ODMr import

    while importing the data into oracle using ODMr utility it gives the following error...
    Error Message: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
    ERROR>SQL*Loader-101: Invalid argument for username/password
    Exception type: java.lang.Exception: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
    ERROR>SQL*Loader-101: Invalid argument for username/password
    Stack trace:
    java.lang.Exception: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
    ERROR>SQL*Loader-101: Invalid argument for username/password
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportDirector.exec_command(Unknown Source)
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportDirector.run(Unknown Source)
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportProcess.run(Unknown Source)
         at oracle.dmt.dm4j.browser.ProgressBar.run(Unknown Source)
         at java.lang.Thread.run(Thread.java:534)
    please suggest me ... the answer...

    ya i saved the password , and password error is solved but it still it throws an another error...
    following below--
    Error Message: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/sensor@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
    Exception type: java.lang.Exception: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/sensor@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
    Stack trace:
    java.lang.Exception: Unable to execute C:\oracle_DB\product\10.2.0\db_1\bin\sqlldr.exe USERID='SENSOR/sensor@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=MOHAMMADKHUB)(PORT=1521)))(CONNECT_DATA=(SID=INTRUSION)))' ,CONTROL='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.ctl' ,LOG='F:\ORACLE_DATA_MINING\ORACLE_10g_Mining\bin\fileimport.log' ,DATA='C:\oracle_DB\product\10.2.0\oradata\kddcup.data_10_percent.txt' ,DISCARDMAX=100 ,SKIP=1 ,ERRORS=100 ,DIRECT=true
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportDirector.exec_command(Unknown Source)
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportDirector.run(Unknown Source)
         at oracle.dmt.dm4j.wizard.director.transforms.FileImportProcess.run(Unknown Source)
         at oracle.dmt.dm4j.browser.ProgressBar.run(Unknown Source)
         at java.lang.Thread.run(Thread.java:534)
    plz suggest me..

  • Error in build firefox on ABS

    Hello. I'm trying to compile firefox 36.0.1, but I can not finish the build.
    Always in the (I believe) the packaging, it happens here:
    Traceback (most recent call last):
    File "/home/junior/firefox/src/mozilla-release/toolkit/mozapps/installer/packager.py", line 402, in <module>
    main()
    File "/home/junior/firefox/src/mozilla-release/toolkit/mozapps/installer/packager.py", line 394, in main
    args.source, gre_path, base)
    File "/home/junior/firefox/src/mozilla-release/toolkit/mozapps/installer/packager.py", line 157, in precompile_cache
    errors.fatal('Error while running startup cache precompilation')
    File "/home/junior/firefox/src/mozilla-release/python/mozbuild/mozpack/errors.py", line 101, in fatal
    self._handle(self.FATAL, msg)
    File "/home/junior/firefox/src/mozilla-release/python/mozbuild/mozpack/errors.py", line 96, in _handle
    raise ErrorMessage(msg)
    mozpack.errors.ErrorMessage: Error: Error while running startup cache precompilation
    /home/junior/firefox/src/mozilla-release/toolkit/mozapps/installer/packager.mk:696: recipe for target 'stage-package' failed
    make[5]: *** [stage-package] Error 1
    make[5]: Leaving directory '/home/junior/firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/browser/installer'
    /home/junior/firefox/src/mozilla-release/toolkit/mozapps/installer/packager.mk:742: recipe for target 'make-package' failed
    make[4]: *** [make-package] Error 2
    make[4]: Leaving directory '/home/junior/firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/browser/installer'
    /home/junior/firefox/src/mozilla-release/config/rules.mk:545: recipe for target 'default' failed
    make[3]: *** [default] Error 2
    make[3]: Leaving directory '/home/junior/firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu/browser/installer'
    /home/junior/firefox/src/mozilla-release/browser/build.mk:9: recipe for target 'package' failed
    make[2]: *** [package] Error 2
    make[2]: Leaving directory '/home/junior/firefox/src/mozilla-release/obj-x86_64-unknown-linux-gnu'
    /home/junior/firefox/src/mozilla-release/client.mk:233: recipe for target 'profiledbuild' failed
    make[1]: *** [profiledbuild] Error 2
    make[1]: Leaving directory '/home/junior/firefox/src/mozilla-release'
    client.mk:171: recipe for target 'build' failed
    make: *** [build] Error 2
    ==> ERRO: Uma falha ocorreu em build().
    Abortando...
    Someone could explain to me what is happening ?
    Thanks so much!

    I tried to compile the latest version of firefox, but the same error occurred at the time of packaging. ¬¬

  • HTTP send returned with status code(100,101)

    Hi Experts,
    I am facing an error in ADS at se38 --> FP_PDF_TEST_00
    Test Program: Version Information (for Analysis Only)
    SYSTEM ERROR
    ERROR CODE    :    100,101
    ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code
    SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100,101).
    Please let me know how to resolve this issue
    Thanks & Regards,
    Arun

    Hi,
    Thanks For your reply..
    I tryied but no use
    Actually Here i am tryping to do configuration between ECC6 and Bi (ABAP+JAVA) system
    Here my Bi  system no id different from ECC6 system no.
    The steps i did is
    1.created ADS HTTP RFC Connection  in ECC6 sytem
    2. System no. given as BI system no.
    3. If i give prefix:  /AdobeDocumentServices/Config?style=rpc  it is not allowing me to save  But i give /AdobeDocumentServices/Config it allows me to save
    4.And other settings i followed as document "Configuring ADS for Guided Procedures ''
    I am facing same error
    Test Program: Version Information (for Analysis Only)
    SYSTEM ERROR
    ERROR CODE    :    100,101
    ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code
    SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100,101).
    Please any body know me the solution
    Thanks & Regards,
    Arun

Maybe you are looking for