Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Similar Messages

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Bi data upload error:status 51 - error: Error 8 when starting the extr prog

while data load form the source system into thw bw i am getting error in error monitor as under,
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
                                IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
                               Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
   r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
                 IDoc sent to SAP system or external program"
   bw side: "IDoc: 0000000000007089 Status: Application document posted,
                 IDoc was successfully transferred to the monitor updating"
what to do at r/3 side?
Best regards,
dushyant.

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Excel extractor produces error "Error 8 when compiling the upload program"

I am trying to test a new Excel extractor I've created but when I do so I get the following error:
RSAR233
Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
Any ideas?
Thanks for the help.

OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

Failed to execute with the error Error occurred when starting the parser: t

Dear All
I am getting this error
""A database error occurred. The database error text is: The MDX query SELECT { [DASKA1EDEL2DMLXTQ62S595QV].[DB7BP4A8AMQTUD3DPEEPS4J87] } ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH].[LEVEL01].MEMBERS, [DASKFZ1TRFOLNTG78G0HH2B87].MEMBERS ), [0MATERIAL].[LEVEL01].MEMBERS ), [0PLANT].[LEVEL01].MEMBERS ), [0COMP_CODE].[LEVEL01].MEMBERS ), [0ACTDELDATE].[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_NAME, MEMBER_CAPTION ON ROWS FROM [0IC_C03/ZMATSTOCK] failed to execute with the error Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'. (WIS 10901)""
I already went to similar kind of error solution in forum,but this error is coming for one web I query,all other reports are working fine.
I already implemented note 1032461

Hi,
Under normal circumstances it should be enough to restart the connection service.
As far as we know there is no formal solution to this problem from SAP yet but restarting the connection service is much less of an interuption compared to restarting the the SIA.
Re-starting the connection service should resolve this issue. since, Connection service is only related to DeskI and Rich Client re-statrng wonu2019t impact other business objects components including java report panel.
All the Best,
Madhu....

Error 8 when compiling the upload program: row 436

Hi all,
pls let me know how to solve this error
Error 8 when compiling the upload program: row 436, message: A newer version of data type /BIC/B0000582000 was
Thanks
Prashant

Hello SAP gurus.
I know it's a very long time the question was asked, but who cares if it can someday help somebody?
So i just faced the same issue, the solution was sample, i relaunch RSA1 and the problem was solved.
Hope i would be helpful
Salah

Error 8 when compiling the upload program: row

Error 8 when compiling the upload program: row
248, message: Data type /BIC/CCAWSAI_CID_TEXT was
found in a new
kindly help me out pls

Hi Raghu,
Error 8 Implies
The last words should be read as "was found in a newer version".
The system says that the active version of your Infosource is older then another version.
I'd recommend to delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure). Then assign source system, create infopackage and load data again.
else..
Goto se38 and Run the program RS_TRANSTRU_ACTIVATE_ALL and relogin..
Plz look the link.
[Error when compiling the upload program (Message no. RSAR233) ]
Hope this helps...
Regards,
NR
Assign points if helpful...

Error 8 when compiling the upload program

When loading data to the Infocube it gives the following error
"Error 8 when compiling the upload
227, message: Data type /BIC/CCFBZ
found in a ne "
It doesnot go any further from thr infopackage also..

Error when compiling the upload program (Message no. RSAR233)

Error 1053 when starting the Routing And Remote Access service

Hi all,
When I tried to start the "Routing And Remote Access" service on Windows 8.1 I got an error message as follow.
Could some one help me please.
Than's.

Hi MRAB,
Please check if all dependences are enabled first.
Then set the start type to Automatic.
Does this issue still occur after a restart?
Alex Zhao
TechNet Community Support

Keep encountering "Error 56" when starting the VPN client

Hello all. I recently downloaded the VPN client to connect to my school's Unix servers. The first time I downloaded it, it worked just fine. But now for some reason, the service will not start at all. When I go to start>programs>Cisco Systems>VPN client, it seems to load, but after about a minute, I get this error message: "Error 56: The Cisco Systems, Inc., VPN client has not been started. Please start this service and try again." I've tried going to the Cisco folder and clicking on the .exe files, but they don't seem to do anything. Clicking on "cvpnd.exe" and "vpnclient.exe" don't bring up anything, and nothing appears in the task manager.
I'm using Vista. Any ideas what could be causing this?

I am not sure if people are still experiencing this issue but I came across it this morning on my Windows 7 64 Bit system.
I eventually figured out the problem...
1. Uninstall Cisco VPN Client
2. Go into device manager and remove ANY Cisco Virtual Adapters
3. Re-install
For what I could see the problem was caused by the cvpnd.exe (Cisco Service) process being unable to target a 'single' adapter.
Hope this helps anyone having this issue.

Error occurred when starting the parser: timeout during allocate / CPIC-CAL

hi....plz how to solve that error .actually iam loading direct update dso from apd i having the records 1000 in query to read and transfer to apd to direct update dso. its coming error when excuting .plzz solve the error rectification ..............

Hi Anitha,
There are some Notes and suggestions in the following link. Hope your problem will be resolved.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=erroroccurredwhenstartingtheparser%253Atimeoutduringallocate%252FCPIC-CAL+
Regards,
Suman

Message "Error 4 when starting extraction program" with any extraction.

Hi to everyone.
We have a problem in a pre-existing BW system of development.
When we start any extraction (for example 0MATERIAL_ATTR), the monitor give us the following error:
ERROR 4 WHEN STARTING THE EXTRACTION PROGRAM (R3-19).
I've checked the link between the two system, and it may be right. When I check the soursystem from BW I havn't any error.
Then, when I test the extractor on R/3 with RSA3, any error as result and the tester extracts a lot of records.
Anyone have any idea ?
Max

Thanks for your fast help.
Claudio, the messages are only two ...
- Error 4 when starting the extraction program
R3 19
- Errors in source system RSM 340
No dump on the R/3 and BW.
Roberto, I've followed the note 325470 too, but the problem remain. Only one ... the note 147104 say ...
"This server must be capable of starting a background process for data extraction".
Is there a way to check this point ?
Thanks in advance guys.
Max

CG02 Report from Template error when starting the display application

System info: SAP GUI 720 (patch 10007878), ECC 6.0, SAP_APPL/EA-APPL 605, WWI 2.7 (patch 20000084)
Hi, folks.
I was able to execute CG02 'Report from Template' function. My local MS Word 2003 would open successfully to display the report as expected. Suddenly, I couldn't do that anymore. I'm now getting msg "An error occurred when starting the display application" (C$772). And I didn't change anything.
Any clue to what has happened or why it is happening? In my Word, I have 'C:\Program Files\SAP\FrontEnd\SAPgui\wwi' set as the file location for User templates. What else should I check?
Thanks in advance.

Hi, Caroline.
Thanks for pointing me (back) to it! (I've encountered a similar issue with the same param back in 2010...)
I'm positive that the problem started after I tried to run the transaction code (of my custom report program that does the CG02 'Report from Template' function) from the web gui ('You Can Also' menu function). Somehow, the standard SAP fms within It changed the param ESWWI_INST value from 'EXISTFRONT' to 'WWISERVER'. So when I ran CG02 and the WWI server is not available yet, I received the error msg.

Error 8 when starting the extraction program

Similar Messages

Maybe you are looking for